Hopp til innhold
Hjem / Verktøy/Lakk/Lim / Verktøy alle produsenter / Tamiya verktøy / Tamiya 74008 Flat Screwdriver No.1 Medium
-14%

Tamiya 74008 Flat Screwdriver No.1 Medium

Art.nr: 74008

59,-

69,-

- 14%
Tamiya

Tamiya
På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Flat trekker fra Tamiya.

No. 1 bits – medium.

Med ett godt håndtak. Kvalitets verktøy.

Produsent

Tamiya

Tamiya

Mr. Yoshio Tamiya founded a saw mill/lumber factory in Shizuoka-City. Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World."


Now Tamiya is offering more than 3000 different products, both in the fields of precision static models and high performance radio control vehicles. These products are not only sold in Japan but also exported in vast quantities to the United States, Europe, South East Asia, and to many other parts of the world. The standard of excellence achieved by Tamiya is regarded as among the very finest in the world of model hobbies.

Kunder kjøpte også

Hovedbilde M-Drive Bag 3 - Cars/Trucks - L670 x W365 x H360mm Hovedbilde M-Drive Bag 3 - Cars/Trucks - L670 x W365 x H360mm
M-Drive Bag 3 - Cars/Trucks - L670 x W365 x H360mm
M-Drive RC Bag 3 - Crawler This 67 x 36.5 x 36cm black RC Vehicle bag from M-Drive is a lightweight case designed to safely store, transport & protect your 1/10 scale TRX-4 or TRX-6 crawler and it's transmitter/charger. Also fits most other 1/10 scale crawlers. Material Weather resistant, heavy-duty 600-denier nylon shell that can be cleaned with mild soap and a moist cleaning cloth. Crawlers The RC Bag 3 is a practical soft and lightweight bag that can store most 1/10 scale radio controlled crawlers such as Traxxas TRX-4 & TRX-6. It may also fit other simmilar sized crawlers/trucks. RC Garage Storage This RC Car Bag is a practical storage place in your home when you’re not in using it. The perfect RC Garage Storage solution! Weather Resistant A heavy-duty 600D nylon shell shields your RC equipment from moisture and dust. Shoulder Strap The removable, easily adjustable shoulder strap includes a cushioned shoulder pad for comfort. Side Handles Heavy-duty rubber grip side handles add lifting and carrying options. Removeable Divider The internal dividers are removeable and lets you store your vehicle transmitter, a charger and a few extra batteries etc. Inside Size: Length: 67cm Width: 36.5cm Height: 36cm Inside Size With Dividers: Main area: 67 x 27 x 36cm Secondary area(s): 67 x 8.5 x 36cm

799,-

849,-

KJØP
-6%
Hovedbilde M-Drive Bag 3 - PE Bottom Plate Hovedbilde M-Drive Bag 3 - PE Bottom Plate
M-Drive Bag 3 - PE Bottom Plate
M-Drive MD95013 - Bag-3 PE Bottom Plate - 650x360mm This is an accessory plate made of lightweight, but rigid, PE material that is made to make the M-Drive Bag-3 floor/bottom more rigid. Specs: Fits M-Drive Bag-3 (MD95003) Size: 650x360mm Thickness: 3mm Material: PE foam

69,-

KJØP
Hovedbilde Yeah Racing YA-0594YW RC BODY CLIP FOR 1/8 1/10 1/12 ... Hovedbilde Yeah Racing YA-0594YW RC BODY CLIP FOR 1/8 1/10 1/12 ...
Yeah Racing YA-0594YW RC BODY CLIP FOR 1/8 1/10 1/12 ...
Yeah Racing RC Body Clip For 1/8 1/10 1/12 10pcs Florescent Yellow #YA-0594YW Description: Yeah Racing series of body clips featuring different colors for you to match to your paint scheme! More than enough for a car so you can have spares in case you lose one.   Feature:   For: 1/8 1/10 1/12 RC Car Material: Steel Color : Florescent Yellow   Include:   Body Clips (10 pcs)

49,-

KJØP
Hovedbilde M-DRIVE 90500 Tool Pouch/Bag with Zipper Hovedbilde M-DRIVE 90500 Tool Pouch/Bag with Zipper
M-DRIVE 90500 Tool Pouch/Bag with Zipper
M-DRIVE Tool Pouch/Bag with Zipper This is a professional canvas tool pouch that is the perfect on-the-go storage for your M-Drive tools. Specs: Black canvas with yellow contrast Printed M-Drive logo Zipper Length: 260mm Width: 240mm Height: 35mm Tools not Inculded as shown below  

149,-

KJØP
Hovedbilde HPI Racing Plazma 7.2V 2000mAh NiMH Stick Battery Pack Hovedbilde HPI Racing Plazma 7.2V 2000mAh NiMH Stick Battery Pack
HPI Racing Plazma 7.2V 2000mAh NiMH Stick Battery Pack

179,-

199,-

KJØP
-10%
Hovedbilde Tamiya PM-1 White Color Polycarb Paint Marker
Tamiya PM-1 White Color Polycarb Paint Marker
Ths is PM-1 a White Colour Polycarb Paint Marker by Tamiya For Lexan Body Painting And Detailing Tamiya Polycarb Paint Marker contains a water soluble paint for use on clear Polycarbonate bodies of R/C vehicles. (E)         (+100)

49,-

99,-

KJØP
-51%
Hovedbilde Tamiya 53924 DF-03 Heat Sink Bar Set
Tamiya 53924 DF-03 Heat Sink Bar Set
Option part for Dark Impact (DF-03 chassis). Stylish blue anodized aluminum gearbox plate features 3 heat sink bars to increase heat dissipation effect. Heat sink effect may be adjustedby removing one or more heat sink bars. *Compatible chassis: DF-03

189,-

KJØP
Hovedbilde Hobbywing 30401110 Motor XeRun V10 7.5T G3 Hovedbilde Hobbywing 30401110 Motor XeRun V10 7.5T G3
Hobbywing 30401110 Motor XeRun V10 7.5T G3
Hobbywing XeRun V10 G3-7.5T Brushless Sensored Motor It’s a motor specially designed for high-level racing. The RMP of G3 Stock motor is significantly improved, the KV & torque are improved by 16% and 4% respectively, compared with the V10 G2 Stock motor.   Lightweight. The G3 Modified & Stock motors only weigh 161g & 132g respectively, the weights are reduced by 11% & 21% when comparing with the V10 G2 motors. The built-in high precision Hall sensor combined with the high precision and balanced rotor guarantee outstanding linearity of the motor.  The mechanical timing can be adjusted finely and smoothly; the skid-proof lines on the rear end plate of the motor guarantee stability of the timing after adjustment. For G3 Stock motors (10.5T~25.5T), the timing is adjustable from 30 degrees to 60 degrees; for Modified motors (3.5T~8.5T), the timing is adjustable from 20 degrees to 50 degrees. The motor case is designed to be easy to dismantle for maintenance purposes and for the replacement of common wearing parts.  The special shell design which makes the stator core expose to the air maximizes cooling. Big holes on the end plates of 10.5T~21.5T motors further help reduce heat; small holes on the end plates of 5.5T~8.5T motors effectively keep sand or dirt from getting inside and damaging the motor(s). The use of high-performance stator core, heat ( 200°C) - resistant wire, heat (200°C) - resistant rotor with strong structure, imported high precision and high strength bearings, and copper solder tabs with super current endurance guarantees outstanding performance and super durability. Asymmetric Bearings: By comparison (with the V10 G2 motor), for improving the load-carrying capacity, the size of the front bearing of the G3 motor is increased by 26% ; while for lower resistance, the size of the rear bearing is reduced by 6%. The asymmetric bearing design will make the motor running more stable and smooth. It’s compliant with IFMAR, ROAR, EFRA, BRCA rules, and certificated by RoHS, CE, FCC and etc. 7.5T Specs:  Application: 1/10 2WD Modified Class Off-road Racing Type: Sensored Brushless Poles: 2 KV Rating: 4420 LiPo: 2S No Load Current: 3.3A Max Power Output: 346W Amp at max power: 100A OD: 35.9 mm Length: 51.2 mm Shaft dia: 3.17 mm Shaft length: 13.3 mm Weight: 161 g Std rotor: 5-12.5 Timing: 20-50° (Adjustable)

1.095,-

1.195,-

KJØP
-8%
Hovedbilde Tamiya 87107 - craft cotton swabs triangle M size (50) Hovedbilde Tamiya 87107 - craft cotton swabs triangle M size (50)
Tamiya 87107 - craft cotton swabs triangle M size (50)
Tamiya 87107 - craft cotton swabs triangle M size (50) When building a scale model, cotton swabs are often used with painting and applying decals. However, cotton swabs bought from supermarkets usually have loosely spun tips and quickly lose shape. These new Craft Cotton Swabs have tightly spun cotton tips and are easy to use, making them much better suited for hobby use. In the Craft Cotton Swab range there are five kinds: two with round and with three triangular shaped tips. These are industrial strength cotton swabs, and compared with those found in supermarkets, they do not fray as easily when wet or dipped in solvents, resulting in less wastage. These swabs are great for applying decals and panel lining onto model surfaces. Creating fine details and weathering on small areas such as in Waterline series models becomes a breeze. You can also use the swabs effectively for applying any of the Weathering Master Set color schemes, such as realistic rust stains, to your model. Basic specifications  50 pieces

59,-

KJØP
Hovedbilde Tamiya 87220 TIRE COATING FLUID
Tamiya 87220 TIRE COATING FLUID
Fornyer gummidekk som har bleknet. Egner seg til dekk av gummi på modeller og radiostyrte biler.   Informasjon på engelsk: ★This coating is for use on car and bike model tires – static, R/C or even Mini 4WD! ★It is a water-based fluid that spreads well and can be easily wiped off. ★Shake the bottle, put a few drops on a cloth and then apply onto the tires for a glossy finish. ★It can also be used to on tires that have whitened, to return them to a more lustrous state. ★Contents: 10ml. *Check rules before applying to tires on any cars which are to join a race.

119,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png