Hopp til innhold

Verktøy/Lakk/Lim

Art.nr: 87108
Copied
By Coating your Diorama base with our water-based texture paint, you can create rough expressions and uneven surfaces. A coating dry time is aprox. 4-5 hours This water-based paint features a paste-like texture with special resin particles for recreating dirt surfaces. Paste-like consistency offers excellent concealment qualities and can also be used like putty to fill in gaps. After applying a thick layer, the surface can be formed before it dries completely. A general Brown color covers most soil surfaces and a Dark Earth color depicts European dark soil and peat bogs. There is enough paint in each bottle to cover a B4-sized area. (1 coat)About the Item-40ml bottle. Drying time: Summer 3-4 hours, Winter 4-5 hours. Thin with water if paint is too thick. As these items are water-based, they do not have a strong smell and it is possible to clean with water before it sets. When applying, please use a spatula or an old paintbrush as new brush bristles may be damaged when applying. It is possible to mix with other Tamiya acrylic paints to achieve different colors. It is possible to apply washing and dry brush on the texture painted surface with enamel paints. Do not use with airbrushes as it may cause damage.

119,-

På lager 1
KJØP
Art.nr: 87111
Copied
By Coating your Diorama base with our water-based texture paint, you can create the expressions of green Grass. You can start with soil coverings and add grass ontop. A coating dry time is aprox. 4-5 hours About Grass Effect Texture Paint This water-based paint features a paste-like texture with  5mm long colored fibers which is great for recreating grassy surfaces. For best results, apply this over a coat of Diorama Texture Paint (Soil Effect). There is enough paint in each bottle to cover a B4-sized area. (1 coat) 40ml Bottle.        -Drying time: Summer 3-4 hours, Winter 4-5 hours. As this item is water based, it does not have a strong smell and it is possible to clean with water before it sets. When applying, please use a spatula or an old paintbrush as the new brush bristles maybe damaged when applying. It is possible to mix with other Tamiya acrylic paints to achieve different colors. It is possible to apply washing and dry brush on the texture painted surface with enamel paints. Please note that this paint will not depict a grass surface with individual blades of grass. Do not use with airbrushes as it may cause damage.

119,-

** Ikke på lager
KJØP
Art.nr: 87113
Copied
This cement uses limonene extracted from citrus fruits and is very safe to use and comes with no unpleasant smells. It can be used for plastic model assembly as well as for cementing plastic plates and beams. Also, this cement has a strong initial adhesiveness not seen with other limonene cement items. The bottle's cap comes with a convenient brush. 1 bottle contains 40ml.

89,-

** Ikke på lager
KJØP
Art.nr: 87117
Copied
This water-based paint has a paste-like composition and 5mm colored fibers. The fibers recreate a dry grass-like surface. For optimal results, use over a coat of Diorama Texture Paint, such as soil effect, item 87108.

179,-

På lager 1
KJØP
Art.nr: 87118
Copied
When preparing a polycarbonate body for painting, washing with detergent to remove any oils and so forth from its surface and waiting for it to dry takes time. Polycarbonate Body Cleaner will save you time with this pre-painting cleaning job. Apply the Polycarbonate Body Cleaner onto a cloth and gently wipe the surface until the dirt, grease, or oils have been cleaned off. It dries quickly so you can proceed to painting right away. It can also be used to remove completely dried paint from the body without damaging the body surface. 1 bottle contains 40ml. ■For Cleaning the Body Apply cleaner onto a cloth and wipe the surface to clean the body. ■For Removing the Paint Completely dried paint can be easily removed.

79,-

** Ikke på lager
KJØP
Art.nr: 87119
Copied
This water-based paint features a paste-like texture with marble particles for recreating snow surfaces. Can be used to depict regular snowy surfaces. There is enough paint in each bottle to cover a B4-sized area. (1 coat) Wide Variety of Snow Expressions There are a variety of snow surface conditions to be reproduced. Apply the "Snow Effect" in combination with "Powder Snow Effect" to change the snow coverage condition to reproduce various snow surfaces. The paint also features easy application and has no unpleasant smell. Specs & Features 100ml Pet bottle. As this item is water-based, it does not have a strong smell and it is possible to clean with water before it sets. Drying time: Summer= 3-4 hours, Winter= 4-5 hours. When applying, please use a spatula or an old paintbrush as new brush bristles may be damaged when applying.  It is possible to mix with other Tamiya acrylic paints to achieve different colors.  Do not use with airbrushes as it may cause damage.

119,-

På lager 1
KJØP
Art.nr: 87124
Copied
Tamiya Craft Tools Pipette Set (short & Long / 3pcs Each)

59,-

På lager 2
KJØP
Art.nr: 87125
Copied
Palettes are handy for mixing paints. Metal palettes are useful, but they require cleaning with thinner after each use. This PET plastic palette can be disposed of after each use, thus allowing the modeller to save both time and money. About the Item Each palette plate has 15 wells, including 9 round (Dia.: 25mm The palette plate is 3mm thick and each section can be easily cut away with scissors. The palette can be cleaned with any Tamiya paint thinner except Item 87089 Tamiya Airbrush Cleaner (250ml). Related Items Tamiya Modeling Brush Basic Set (87066) Tamiya Modeling Brush HF Standard Set (87067) Paint Stirrer (2pcs.) (74017)

69,-

På lager 2
KJØP
Art.nr: 87134
Copied
Ekstra tynn sement (lim) er svært nyttig for plast modell byggeren. Limet strømmer inn i områder som små hull mellom plastdeler og etterlater ikke merker når det tørker. Flasken kommer med en praktisk børste.  1 flaske inneholder 40ml sement.

99,-

** Ikke på lager
KJØP
Art.nr: 87135
Copied
MARK FIT (STRONG)

69,-

På lager 2
KJØP
Art.nr: 87137
Copied
This new cement is specially formulated for use with ABS plastic parts such as the masts in 1/350 scale ship model kits, which cannot be attached with normal plastic cement. This cement can also be used to cement ABS plastic parts to styrene parts. The bottle’s cap has an applicator brush to ensure easy application. 1 bottle contains 40ml

89,-

På lager 6
KJØP
Art.nr: 87138
Copied
Dette CA Cement Accelerator muliggjør raskere herding av CA lim. Påfør acceleratoren på den ene flaten og CA-sement til den andre. En sterk binding vil raskt dannes når de to flater presses sammen. Dette er ideelt for å feste små fotoetset deler eller deler med en meget liten sementeringsflate . Flasken har en pensel for å sikre enkel påføring.  Dette er en alkoholbasert akselerator som kan skade plastdeler. 1 flaske inneholder 10 ml.  

119,-

** Ikke på lager
KJØP
Art.nr: 87146
Copied
Tamiya (#87146) - Fine Surface Primer Large L Pink - 180ml Spray Can Plastic/Metal Liquid Primer is highly useful for filling seam lines and smoothing over scratches in small or difficult to reach areas since it can be applied with a modeling brush. This is a pink-colored version of the liquid primer which is ideal as undercoat for spraying red color paints. Spray can contains 180ml.

139,-

På lager 4
KJØP
Art.nr: 87150
Copied
Tamiya 87150 Polishing Sponge Sheet 1500 Attached to a flexible sponge base, the abrasive coat of this sanding sheet is well-suited for removing protrusions on plastic models and also finishing materials such as wood and metal. The sponge’s flexibility allows even finishing of curved surfaces and hard-to-reach corners. This item can be easily cut into the desired shape/size using a modeling knife. Note: Suitable for wet sanding use. Choose from 4 different levels of abrasion. 400,600,1000,1500 Tamiya Sanding Sponge Sheet x1 Dimensions: 114 x 140mm Abrasive material: Aluminum oxide Sponge thickness: 5mm Example of using a polishing sponge    

69,-

På lager 2
KJØP
Art.nr: 87160
Copied
★This primer recreates the color of anti-rust paint used as primer on military vehicles. ★It can be used not simply as an undercoat, but also as a topcoat. ★Provides an excellent base when painting photo-etched parts and other difficult-to paint surfaces. ★Can contains 180ml.

169,-

På lager 4
KJØP
Art.nr: 87164
Copied
This is the Tamiya Masking Tape/Plastic Sheeting.     FEATURES Plastic construction  Masks large areas such as R/C car bodies  Masking tape is preattached to plastic sheeting for sharply defined  edges  Peels off easily after painting   INCLUDES Roll of Tamiya Masking Tape/Plastic Sheeting   SPECIFICATIONS  Length: 32.8' (10m)  Width: 21.6" (550mm)

99,-

På lager 1
KJØP
Art.nr: 87176
Copied
This is Tamiya decal adhesive. It is perfect for giving adhesive power to decals which have sat too long in water and lost their stickiness or become prone to "silvering," when the clear face of the decals whitens. •Simply apply to the area of the model where the decal is to be placed, and then apply decal. •Comes in a 10ml bottle with cap brush for handy application. •Water-based liquid makes for safe work, and can also be removed with a wet cloth if it escapes from under the decal.

69,-

På lager 1
KJØP
Art.nr: 87177
Copied
This is the 2mm Wide Masking Tape for Curves from Tamiya.     FEATURES Constructed of soft resin material that allows tape to adhere in a  curve while preventing paint from seeping into masked-off areas  Use of narrower tape is recommended for sharper curves   INCLUDES 2mm Wide Masking Tape for Curves   SPECIFICATIONS  Width: 0.079" (2mm)  Length: 65.6' (20m)

69,-

** Ikke på lager
KJØP
Art.nr: 87178
Copied
En fantastisk maskeringsfilm som tillater å maskere kurver!   Denne er helt utrolig og må bare prøves.   Masking is a job which modelers of all kinds of models in every scale must carry out, and it requires precision in order to ensure that your creation gets the perfect paint job. This masking tape helps in the process, allowing smooth and secure masking-off of curved lines where standard masking tape would sustain creases and possibly let paint seep underneath. This tape is available in 3 separate widths to meet a variety of needs such as 2mm, 3mm and 5mm respectively. Length of roll: 20m A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas. Use of narrower tape is recommended for sharper curves.

69,-

** Ikke på lager
KJØP
Art.nr: 87179
Copied
En fantastisk maskeringsfilm som tillater å maskere kurver!   Denne er helt utrolig og må bare prøves.   Masking is a job which modelers of all kinds of models in every scale must carry out, and it requires precision in order to ensure that your creation gets the perfect paint job. This masking tape helps in the process, allowing smooth and secure masking-off of curved lines where standard masking tape would sustain creases and possibly let paint seep underneath. This tape is available in 3 separate widths to meet a variety of needs such as 2mm, 3mm and 5mm respectively. Length of roll: 20m A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas. Use of narrower tape is recommended for sharper curves.

69,-

** Ikke på lager
KJØP
Art.nr: 87180
Copied
PRIMER FOR TAMIYA CA CEMENT (PP/PE/POM) This handy primer is tailor-made for situations when you are using Tamiya CA Cement on difficult-to-cement materials such as polypropylene (PP), polyethylene (PE) or polyacetal (POM). Also use it if you want to modify your Mini 4WD or Educational Construction creations! Simply apply to both sides of the joint to be cemented, wait for it to dry, and then apply CA Cement! The 10ml bottle features a cap with brush for easy application! For use with PP (polypropylene): such as Mini 4WD car wheels, plastic document folders, etc. PE (polyethylene): such as poly caps, Educational Construction series wheels, etc. POM (polyacetal): such as Mini 4WD chassis parts.

159,-

179,-

På lager 2
KJØP
-11%
Art.nr: 87182
Copied
Tamiya Extra Thin Cement is widely popular glue among modelers around the world. You will find it in most modeler’s workshops. The quick setting version dries around 4 times faster than the original Tamiya Extra Thin Cement, saving you time (and energy) holding parts in place! It also has less-tendency to seep out from part joints. Like the consistently popular original product, it is highly liquid and able to flow into even small cracks, making it useful for attaching parts in very tight spaces. It can also be used to attach parts which have been pre-fitted by hand. Contents: 40ml. Bottle features a handy brush on the underside of the cap for easy application. Not for use with elastomer (used on track parts, etc.) as it can cause brittleness. Original Tamiya Extra Thin Cement (Item 87038) is still recommended for use in situations where you wish to fill larger gaps and seams.

89,-

På lager 2
KJØP
Art.nr: 87183
Copied
Lar deg fjerne akrylmaling, emaljemaling og lakkmaling. Fjerner blant annet maling fra plastbyggesett og fargede plastbrett. Til og med fra polykarbonat, uten å misfarge! Vannløslig, med svak odør.   This multi-purpose liquid is capable of removing acrylic-, enamel- and lacquer-based paints, including paints for use on polycarbonate. It is kind to model parts surfaces, and does not cause clouding when used on polycarbonate, and can also be used to remove metal plating. ★Water-soluble material has low odor levels. ★Can be re-used one or two times. ★Not for use on ABS resin.

239,-

** Ikke på lager
KJØP
Art.nr: 87184
Copied
MASKING TAPE FOR CURVES 12MM

129,-

** Ikke på lager
KJØP
Art.nr: 87187
Copied
Tamiya 87187 - Instant Adhesive (Easy Sanding) An instant adhesive that is easy to scrape after curing. It is easy to correct the adhesive squeeze out, and it is also convenient for filling small scratches and gaps. Uses a cap that can be opened simply by screwing it in. 3g, with aluminum tube. No more worrying about excess cement; after drying, this CA cement is easy to sand down. It is also perfect for dealing with small scratches and gaps. Contents: 3g. Comes in an aluminum with twist-off cap.

69,-

På lager 2
KJØP
Art.nr: 87188
Copied
Tamiya 87188 - Multipurpose Cement (Clear) Helt gjennomsiktig lim som passer bra for å feste vanlige og fargede deler. Er skånsom mot maling. Lav viskositet. Ideal for bonding transparent and plated parts: A highly transparent adhesive suitable for bonding transparent and plated parts. Since it is difficult to melt the painted surface, it is OK to bond the painted parts. In addition, it has a low viscosity and is easy to apply with less stringiness. It is easy to apply even to small parts, and good workability is also a point. Since there is plenty of time before it hardens, it is possible to adjust the bonding position. It can be used for many materials such as metal, wood, rubber, leather, and paper as well as plastic. Basic specifications: 20g, with aluminum tube. Convenient for bonding transparent parts such as airplane windshields. It is also suitable for bonding transparent parts and plated parts such as car model lights.

109,-

** Ikke på lager
KJØP
Art.nr: 87189
Copied
Panel Line Accent Color Description Tamiya Panel Line enamel paints are ideal for highlighting panel lines and other details to give your model a more realistic depth. The paint has been pre-diluted into the ideal viscosity and can be easily applied into crevasses such as panel lines with the brush on the bottle cap. Once dried, any excess may be cleaned up by using enamel thinner. (Bottle contains 40ml) Examples of use: Black is a general-purpose color and can be used for any type of model. Brown is great for military models as well as highlighting details on bright colors such as Yellow or Orange. Gray is perfect for White or Light Gray parts where Black may be too distinct. Note: Plastic parts may become brittle when using Tamiya Panel Line accent colors. Avoid using on movable parts and take care when applying to load-bearing areas. Apply over base coat of lacquer or acrylic paint. Accent Color paints may damage underlying base coat. Test before applying it onto the model. Take care when applying on flat base coat colors as Accent Color paints may permeate more readily. • Contents: 40ml • A fine brush on the cap enables pinpoint application and removes the need for palettes, etc. • Simply apply and watch as it flows into panel lines to highlight details. Once dried, any excess can be cleaned up using enamel thinner. • Avoid using on movable parts and load-bearing areas of a model  

89,-

På lager 2
KJØP
Art.nr: 87190
Copied
Denne veldig hendige sementen er til bruk sammen tamiya 54792 Body Reinforcing Mesh Tape. (solgt separat) Sammen vil de gjøre ditt karosseri en ekstra sterkt og motstands dyktig mot sprekker og ødeleggelse ved krasj. Innhold / informasjon • Leveres i en brukervennlig aluminiumstube. Nettovekt: 100 g • Tynn spiss er inkludert for enkel påføring • Bruk sammen med varenr 54792 nettingstape. • Bruk først tape og deretter sement. La det tørke noen timer. • Det er ok å bruke denne på malt underflater uten frykt for å skade malingsjobben. • Kan også brukes alene i områder hvor det er umulig å komme til med 54792, og også for å feste separate polykarbonat karosserideler. Som f. eks lyskasser etc

229,-

** Ikke på lager
KJØP
Art.nr: 87193
Copied
Dekalmykner gir dekaler bedre feste, samt forhindrer uønsket «sølveffekt».   Fra produsenten: ★This product both softens decals and improves their adhesion to the target surface, also helping to avoid silvering. ★Contents: 10ml. Cap features an applicator.

69,-

89,-

På lager 5
KJØP
-22%
Art.nr: 87198
Copied
Denne retarderingen er perfekt til bruk når du pensel-maler lacquer paints.  Den forsinker tørkeprosessen, og gjør at du får en bedre overflate etter penselen, noe som gir en jevn og glansfull finish. ★ Kan brukes opp til et forhold på 1:10 (retarder: maling) ved blanding. Innhold: 40ml.   This retarder is perfect for use when brush-painting lacquer paints. It slows the drying process, helping eliminate surface imperfections from brush bristles, giving a smooth and lustrous finish. Can be used up to a ratio of 1:10 (retarder:paint) when mixing. Contents: 40ml.

69,-

** Ikke på lager
KJØP
Art.nr: 87201
Copied
Gir figurer mer realisme og dybde! Fra produsenten: ★Give your figures extra depth and realism using this handy accent color. ★Thinned to just the right consistency, it flows into crevasses on the subject. ★Cap has a fine brush for precise application, rendering separate brushes and palettes unnecessary. ★Bottle contents: 40ml.

89,-

** Ikke på lager
KJØP
Art.nr: 87206
Copied
Tamiya 87206 masking tape 1mm Paper tape that can be conveniently used for different paintings A thin, highly adhesive masking tape developed exclusively for models. It fits well on the uneven surface and does not soak in the paint, and the thinness of 0.08 mm makes the step difference between different coatings inconspicuous. As the width is as thin as 1 mm, it is ideal for curved parts and fine painting, such as window moldings for car models and canopies for airplane models. A reinforcing plate is attached to the side surface to prevent dust from adhering and the tape to be deformed. The core material is made of plastic that does not generate paper dust. Basic specifications Width 1 mm, length 18 m. The color is yellow. A PET reinforcing plate is attached to the side. This is dedicated masking tape developed for plastic models. Features superior adhesion, yet at only 0.08mm thick, it retains the flexibility to cover various non-flat surfaces. At just 1mm wide, it is perfect for use on car model windows, aircraft model canopies and on other fine jobs. Plates on either side of the tape help stop it losing shape or getting dust and dirt stuck to it. Plastic core ensures minimal dust is produced. Length: 18m, width: 1mm   Uses a resin core material that does not generate paper dust. The sides are reinforced with PET resin discs. Delicate masking is possible according to the shape of fine parts and curved parts.

49,-

På lager 1
KJØP
Art.nr: 87207
Copied
Tamiya 87207 masking tape 2mm Paper tape that can be conveniently used for different paintings A thin, highly adhesive masking tape developed exclusively for models. It fits well on the uneven surface and does not soak in the paint, and the thinness of 0.08 mm makes the step difference between different coatings inconspicuous. As the width is as thin as 2 mm, it is ideal for curved parts and fine painting, such as window moldings for car models and canopies for airplane models. A reinforcing plate is attached to the side surface to prevent dust from adhering and the tape to be deformed. The core material is made of plastic that does not generate paper dust. Basic specifications Width 2 mm, length 18 m. The color is yellow. A PET reinforcing plate is attached to the side. This is dedicated masking tape developed for plastic models. Features superior adhesion, yet at only 0.08mm thick, it retains the flexibility to cover various non-flat surfaces. At just 2mm wide, it is perfect for use on car model windows, aircraft model canopies and on other fine jobs. Plates on either side of the tape help stop it losing shape or getting dust and dirt stuck to it. Plastic core ensures minimal dust is produced. Length: 18m, width: 2mm   Uses a resin core material that does not generate paper dust. The sides are reinforced with PET resin discs. Delicate masking is possible according to the shape of fine parts and curved parts.

49,-

På lager 2
KJØP
Art.nr: 87208
Copied
Tamiya 87208 masking tape 3mm Paper tape that can be conveniently used for different paintings A thin, highly adhesive masking tape developed exclusively for models. It fits well on the uneven surface and does not soak in the paint, and the thinness of 0.08 mm makes the step difference between different coatings inconspicuous. As the width is as thin as 3 mm, it is ideal for curved parts and fine painting, such as window moldings for car models and canopies for airplane models. A reinforcing plate is attached to the side surface to prevent dust from adhering and the tape to be deformed. The core material is made of plastic that does not generate paper dust. Basic specifications Width 3 mm, length 18 m. The color is yellow. A PET reinforcing plate is attached to the side. This is dedicated masking tape developed for plastic models. Features superior adhesion, yet at only 0.08mm thick, it retains the flexibility to cover various non-flat surfaces. At just 3mm wide, it is perfect for use on car model windows, aircraft model canopies and on other fine jobs. Plates on either side of the tape help stop it losing shape or getting dust and dirt stuck to it. Plastic core ensures minimal dust is produced. Length: 18m, width: 3mm   Uses a resin core material that does not generate paper dust. The sides are reinforced with PET resin discs. Delicate masking is possible according to the shape of fine parts and curved parts.

49,-

** Ikke på lager
KJØP
Art.nr: 87220
Copied
Fornyer gummidekk som har bleknet. Egner seg til dekk av gummi på modeller og radiostyrte biler.   Informasjon på engelsk: ★This coating is for use on car and bike model tires – static, R/C or even Mini 4WD! ★It is a water-based fluid that spreads well and can be easily wiped off. ★Shake the bottle, put a few drops on a cloth and then apply onto the tires for a glossy finish. ★It can also be used to on tires that have whitened, to return them to a more lustrous state. ★Contents: 10ml. *Check rules before applying to tires on any cars which are to join a race.

119,-

På lager 3
KJØP
Art.nr: 87229
Copied
Flytende lysegrønn maskering til presisjonsarbeid. Kan brukes til å maskere områder hvor maskeringstape kan være vanskelig å bruke – inkludert komplekse eller buede former og krevende overflater. Den kan påføres direkte fra flasken. Drypper minimalt og gir et rent og presist resultat. Kan brukes sammen med Tamiya maling. Vekt: 20g Bruksanvisning Rengjør området som skal maskeres. Til karosserier; Bruk Tamiya Polycarbonate Body Cleaner (87118), eventuelt benytt Zalo eller tilsvarende. Påfør direkte fra flasken og la det tørke helt. Skjær vekk med modellkniv overflødig maskering fra området som skal males, deretter mal. Fjern maskeringsvæsken først etter at toppstrøket med maling har tørket fullstendig. ★ Påfør maskeringsvæsken først etter at grunningen har tørket helt (ved bruk på plastmodeller). ★ Påfør et tynt lag. Det tar ca. 30 minutter å tørke (tykkere lag vil bruke lenger tid å tørke). ★ Bruk en et nytt knivblad når du skjærer i den tørkede maskeringen. Hold nede eventuelle kanter hvor det er luftrom under væsken. ★ Denne væsken er vannbasert. Vis forsiktighet ved påføring over vannbaserte malinger. ★ Væske påført på komplekse overflater kan i visse tilfeller være vanskelig å fjerne. ★ Håndter flasken forsiktig for å unngå utilsiktede lekkasjer. ★ Hvis dysen tetter seg, ta den av og rengjør den.

139,-

På lager 3
KJØP
Art.nr: 89907
Copied
Dette er den siste boksen! TS Spray Lime Green - 100ml Spray Can

149,-

På lager 3
KJØP
Art.nr: 89973
Copied
This is the 3oz (100ml) can of Tamiya TS Spray Paint in Light Sand Metallic.For modelers aged 14 years and above. FEATURES Synthetic lacquer cures in a short period of time Fully covers two or three 1/24 scale car bodies Not affected by acrylic or enamel paints, details may be added by acrylic or enamel paints after entire body is painted with this paint INCLUDES 3oz (100ml) can of Tamiya TS Spray Paint SPECIFICATIONS Can Size: 3oz (100ml) COMMENTS Contents extremely flammable. Use only in well ventilated area. Keep out of reach of children.

119,-

169,-

På lager 1
KJØP
-30%
Art.nr: 89974
Copied
Description: TS Cobalt Green is a limited edition spray paint color designed to complement and perfectly color match the 1/24 scale model of the Porsche 934 Turbo RSR Vaillant model assembly kit. Specifications: 100ml

109,-

149,-

På lager 6
KJØP
-27%
Art.nr: 95107
Copied
★Keep your small Mini 4WD essentials well sorted and safely at hand with this box, featuring two 8-compartment inner cases. ★The outer case is molded in tinted smoke color material with printed commemorative logo and designs.

149,-

** Ikke på lager
KJØP
Art.nr: 86526
Copied
AS-26 LIGHT GHOST GRAY The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.

125,-

På lager 4
KJØP
Art.nr: 86527
Copied
Tamiya AS-27 Gunship Gray 2 Affordable, easy-to-use, quick-drying lacquer-based spray paint air superiority camouflage color used in current US military aircraft. 1/32 scale F-16CJ [Block 50] Optimal for the color of the upper surface of the Fighting Falcon, adding a further sense of finish to the model. 100ML The displayed colors are approximate colors for Web display. It may differ from the actual paint color.

119,-

På lager 3
KJØP
Art.nr: 87194
Copied
Tamiya Lacquer, Thinner Retarder type er en meget hendig tynner med innblandet retarder. Retarder forsinker tørkeprosessen i malingen som gjør at den flyter ut og i mange tilfeller herder bedre. Denne tynneren muliggjør også i langt større grad å penselmale Tamiya maling (X, XF og LP-serien). Innehold 250ml

135,-

** Ikke på lager
KJØP
Art.nr: 74151
Copied
Saks laget for å kutte ut de kurvede områdene på små polykarbonat karosserier. Som for eksempel Tamiya sine 4WD biler, men også 1/24 biler, som for eksempel Lunch Box Mini og Mud Mad. Fra produsenten: ★These scissors are for use cutting out curved sections on Mini 4WD car polycarbonate bodies, their short stainless steel blades providing long-lasting, quality curved cuts on lightly- and sharply-curved sections alike, as well as difficult-to-access spots. ★They are activated by pushing the grips together, for minimum interference from hands in the cutting process. ★Total length: 115mm, blade length: 12mm. ★Includes protective cap to cover the blades when not in use.

295,-

339,-

På lager 2
KJØP
-13%
Art.nr: 87036
Copied
Tamiya Modeling Wax with Applicator Ideal for glossing and protecting glossy painted surfaces such as car models. It is liquid and easy to work with, giving the model a moist and deep luster just by applying it and wiping it lightly. It also makes it difficult for fingerprints and dust to adhere. 30 ml in a plastic container, with a soft cloth for polishing.   Polish til glossy overflater. Passer perfekt til vanlige polykarbonat/lexan karosserier. Poler opp bilen til en flott finish. Skal bilen stilles ut er dette et “must”!  

125,-

På lager 1
KJØP
Art.nr: 85095
Copied
This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           INCLUDES: One 100ml Spray Can of Synthetic Lacquer Metallic Red Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.           Keep out of the reach of children.

119,-

På lager 5
KJØP
Art.nr: 50038
Copied
This is a replacement set of tools which comes with the Tamiya Super Blackfoot. Includes: (1) 4-way box wrench (2) hex (allen) wrenches - 1 large, 1 small (4) 3mm set screws Tamiya hjulkryss.

49,-

På lager 10
KJØP
Art.nr: TC250
Copied
TEAM C PIT BAG Including 7 storage bags inside and 2 storage bags outside of the bag. There is space for the fuel bottle, starterbox or tools that you need at the pit lane. Dimensions of the bag: 530x 200x220mm

795,-

På lager 1
KJØP
Art.nr: TC130
Copied
This set includes altimeter and measuring tools to measure the drop in the wishbone. Incl : Block x 2, Chassis Droop Gauge & Height Gauge

369,-

På lager 1
KJØP
Art.nr: th125
Copied
HEX WRENCH 2.5MM

199,-

På lager 2
KJØP
Viser 701 til 750 (av 1122 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png