Traxxas

Stampede VXL

Populært i denne kategorien

Hovedbilde Traxxas 3638X Shock Tower Rear

Traxxas 3638X Shock Tower Rear

Art.nr: TRX 3638X

Copied

This is the stock replacement REAR shock tower for the Traxxas Stampede/Rustler and Bandit FEATURES: Made from black molded nylon For the Traxxas Stampede SPECS: Width at top: 4 5/16" Width at bottom: 2 1/4" Thickness: 1/4" Height: 2 13/16" INCLUDES: (1) Rear shock tower for the Traxxas Stampede

59,-

Hovedbilde Traxxas 6533X Micro TQi 5-channel Telemetry TSM ...

Traxxas 6533X Micro TQi 5-channel Telemetry TSM ...

Art.nr: TRX 6533X

Copied

Traxxas 6533X - Receiver, micro, TQi 2.4GHz with telemetry & TSM® (5-channel) This is the Traxxas TQi Stability Management Receiver. FEATURES Compatible with Traxxas TQi transmitters equipped with a Multi- Function knob Turned on or off and adjusted via the Multi-Function Knob, or by adjusting the slider in the Traxxas link app Provides greater control on loose dirt, concrete, ice and snow Stabilizes vehicles over rough surfaces as the gyro effect of the spinning front tires continue to "steer" when vehicle is in the air Allows faster cornering speeds Does not restrict throttle Improves braking performance and prevents spinouts Fully conpatible with Traxxas Link Works invisibly in the background to allow driver to maintain connected feel with the vehicle INCLUDES Traxxas TQi Stability Management Receiver REQUIREMENTS Traxxas TQi transmitters with Multi-Function knob Connecting to Traxxas Link App (iOS or Android version) required to update receiver firmware with TSM profile for specific model Traxxas Link Wireless Module may also be required depending on TQi radio to connect to a smartphone via bluetooth

649,-

699,-

-7%

Hovedbilde Traxxas 8361 Shock Caps with Hollow Balls Black (4)

Traxxas 8361 Shock Caps with Hollow Balls Black (4)

Art.nr: TRX 8361

Copied

Shock caps (black) (4) (assembled with hollow balls)

59,-

Hovedbilde Traxxas 3643 Turnbuckles Camber Link 49mm

Traxxas 3643 Turnbuckles Camber Link 49mm

Art.nr: TRX 3643

Copied

These are the Traxxas 49mm Turnbuckle Camber Links for the Bandit, Rustler VXL and Stampede VXL. FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two rear 49mm (82mm center to center) turnbuckles REQUIRES: Installation on the vehicle

89,-

Hovedbilde Traxxas 3654 Hex Wheel Hub 2.5x10mm Fr ...

Traxxas 3654 Hex Wheel Hub 2.5x10mm Fr ...

Art.nr: TRX 3654

Copied

This is a Hex Wheel Hub Set for the Traxxas Rustler and Stampede. These parts have more offset than the stock hex wheel hub set. FEATURES: Gray plastic construction INCLUDES: Two wheel hubs Two 2.5mmX10mm axle pins SPECS: Hex size: 12mm Width: .32" (8mm)

39,-

49,-

-20%

Hovedbilde Traxxas 3655X Suspension Arms Left & Right Slash 4x4

Traxxas 3655X Suspension Arms Left & Right Slash 4x4

Art.nr: TRX 3655X

Copied

This is the Left and Right Suspension Arms for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction Front or rear application INCLUDES: One left suspension arm One right suspension arm REQUIRES: Installation on suspension assembly SPECS: Length: 100mm (3.94") Width: 45mm (1.77") Thickness: 11.5mm (0.45") TRX 3655X

129,-

139,-

-7%

Hovedbilde Traxxas 3691 Gearbox Halves Left & Right

Traxxas 3691 Gearbox Halves Left & Right

Art.nr: TRX 3691

Copied

These are the left and right gearbox halves for the Traxxas Rusler and Stampede truck kits. Includes: One left and one right gearbox half. Features: Tough black nylon construction. Specs: N/A--these will only work with these two kits. Requires: All the internal gears and shafts Assembly Comments: These do not include the hardware for assembly. Refer to manual for appropriate screws.

99,-

Hovedbilde Traxxas 3691A Gear Box Left/Right w/Idler Gear Shaft ...

Traxxas 3691A Gear Box Left/Right w/Idler Gear Shaft ...

Art.nr: TRX 3691A

Copied

This is a Left and Right Gearbox half with Idler Shaft for the Traxxas Stampede and Traxxas Rustler. FEATURES: Gray plastic construction Steel idler shaft INCLUDES: One gearbox One idler shaft COMMENTS: This part fit the standard and XL version of both the Stampede and Rustler.

95,-

Hovedbilde Traxxas 3696 Idler Gear Steel 30T

Traxxas 3696 Idler Gear Steel 30T

Art.nr: TRX 3696

Copied

This is the optional Steel Idler Gear for many Traxxas Vehicles. FEATURES: Steel construction INCLUDES: One steel 30T idler gear REQUIRES: Installation on vehicle

69,-

Hovedbilde Traxxas 3736 Steering Blocks Left & Right (2)

Traxxas 3736 Steering Blocks Left & Right (2)

Art.nr: TRX 3736

Copied

These are the Left and Right Steering Blocks for the Traxxas Bandit, Stampede and Rustler VXL series. FEATURES: Plastic construction Black in color INCLUDES: One left and right steering blocks REQUIRES: 5x11x4mm bearings

39,-

Hovedbilde Traxxas 3739 Screw Pin Set (10)

Traxxas 3739 Screw Pin Set (10)

Art.nr: TRX 3739

Copied

This is the replacement screw pin (or hinge pins) for the Traxxas Stampede and Rustler trucks. They are constructed of chrome-plated steel and used to hold the suspension arms to the chassis and the hubs. PACKAGE INCLUDE: Two 3mm x 46mm screw pins Two 3mm x 40mm screw pins Two 3mm x 29mm screw pins Two 2mm x 27mm screw pins Two 2mm x 24mm screw pins

55,-

Hovedbilde Traxxas 3757 Springs Rear (2)

Traxxas 3757 Springs Rear (2)

Art.nr: TRX 3757

Copied

This is a pair of rear (3") springs for the following Traxxas vehicles: Rustler and Stampede. This is used for the rear of each truck. Features: Black in color 2 per package Medium tension Specifications: Length unsprung: 2.5" Diameter ID: 11/16"

25,-

Hovedbilde

"Bulk" Traxxas 3639 Shock Tower Front

Art.nr: BULK TRX 3639

Copied

*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "Bulk" Traxxas 3639 Shock Tower Front This is a stock replacement FRONT shock tower for the Traxxas Stampede. FEATURES: Made from black molded nylon For the Traxxas Stampede SPECS: Height: 2 3/4" Thickness: 1/4" Width at base: 2 3/4" Width at top: 2" INCLUDES: (1) Front shock tower for the Traxxas Stampede

59,-

Hovedbilde

"Bulk" Traxxas 3760A Ultra Shocks Gray Long (2)

Art.nr: BULK TRX 3760A

Copied

*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "Bulk" Traxxas 3760A Ultra Shocks Gray Long (2) Denne passer til: -Bandit XL5/VXL foran. -Rustler XL5/VXL foran. -og til flere Traxxas biler. Sjekk manualen til din bil. This is a pair of the Long Ultra Shocks from Traxxas for the Bandit. INCLUDES: This is assembled part and needs only to install on the car COMMENTS: Two pairs are required if replacing all shocks.

219,-

Hovedbilde

"Bulk" Traxxas 3792 Dust Cover/Rubber Plug w/Screws

Art.nr: BULK TRX 3792

Copied

*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** This is a Dust Cover and Rubber Plug for the Traxxas Rustler/Stampede FEATURES: Made from black molded nylon For the Traxxas Rustler/Stampede INCLUDES: Dust cover for the Traxxa Rustler 3 x 6 mm round head coarse thread screws (to mount dust cover) Rubber Plug Specs: 3" (77mm) Compatible with Traxxas Telemetry

39,-

Hovedbilde

"Bulk" Traxxas 5116 Ball Bearings 5x11x4mm (2)

Art.nr: BULK TRX 5116

Copied

*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** Disse lagerene er samme størrelse som Tamiya 1150 This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Cars. FEATURES: Metal bearing construction Blue rubber dirt shields INCLUDES: (2) 5X11mm ball bearings, Part #5116 SPECS: Inside diameter: 3/16" (5mm) Outside diameter: 7/16" (11mm) Width: 5/32" (4mm)

39,-

55,-

-29%

Hovedbilde Traxxas 3668A Talon 2.8

Traxxas 3668A Talon 2.8" Rear On All-Star Chrome ...

Art.nr: TRX 3668A

Copied

This is a set of Rear Only 2.8" Mounted All Star Wheels and Tires for the electric Traxxas Stampede and Rustler. FEATURES: 2.8" All Star black chrome wheels Talon tires with foam inserts INCLUDES: Two 2.8" mounted rear talon tires, All Star chrome wheels and foam inserts REQUIRES: Installation on the rear of the Stampede or Rustler SPECS: Outside diameter: 4.92" (125mm) Width: 2.63" (67mm) Inside diameter: 2.79" (71mm) Hex Size: 12mm

369,-

Hovedbilde Traxxas 1926 Vinyl Caps/Antenna Spool

Traxxas 1926 Vinyl Caps/Antenna Spool

Art.nr: TRX 1926

Copied

This is a set of TRAXXAS receiver tube caps and a spool that could be used for any receiver antenna tubes. FEATURES: Caps are yellow plastic. Spool is plastic.(for wrapping excess rx wire before putting in tube) INCLUDES: Two caps One spool

25,-

Hovedbilde Traxxas 3350R Velineon VXL-3s Brushless Power System

Hovedbilde Traxxas 3350R Velineon VXL-3s Brushless Power System

Traxxas 3350R Velineon VXL-3s Brushless Power System

Art.nr: TRX 3350R

Copied

Waterproof Velineon VXL-3s Brushless Power System (includes VXL-3s ESC, Velineon 3500 motor, and speed control mounting plate (part #3725)) Børsteløst powersett til elektrobiler, på 3 celler yter denne motoren veldig mye og kan fint brukes alene som motor i E-Maxx, E-Revo eller lignende biler. (dette er 1/8 biler) men man bør gire den til ca 55-60 km/t med 3 celler. Som motorsett i 1:10 får dette powersettet lett bilen opp i 100km/h. 3mm aksel. This is the Traxxas Velineon Extreme Brushless Power System for electric powered R/C vehicles. FEATURES: Each component engineered to work wih each other to eliminate restrictions and allow maximum power flow Velineon VXL3s ESC; vAuto-detects and compatible with brushed, brushless and sensored brushless motors Compatible with NiCd, NiMH (4-9 cells) and 2-3 cell LiPo battery packs-two stage low voltage detection for LiPos Three driver profiles-Sport, Race and Training Modes Gold-plated motor connectors Velineon 3500 Brushless Motor; 10-turn 3500kV Optimized for extreme power and efficiency in 1/10 scale vehicles Ultra high temp neodymium magnets, high-speed ball bearings Precision balanced rotor Traxxas High-Current Connector Reverse polarity protection makes backward connections impossible Compatible with high-current 12-gauge wire Gold-plated wide surface terminals Textured surface for easy gripping INCLUDES: Velineon VXL3s ESC, Velineon 3500 Brushless Motor and high-current connector REQUIRES: Installing in vehicle NiCad, NiMH (4-10 cells) or 2-3 cell LiPo battery SPECS: VXL-3s Input voltage: 4.8-11.1V (4-9 cells NiMH or 2S-3S LiPo) Supported motors: Brushed/Brushless/Sensorless brushless Motor Limit: None Continuous current: 200A Peak current: 320A BEC voltage 6.0V DC Transistor type: MOSFET On-resisteance: 0.00075 ohms Max (0.006/8 FETs) PWM frequency: 12,000Hz Battery connectors: Traxxas High-Current Connector Motor connectors: TRX 3.5mm bullet connectors Motor/battery wiring: 12-gauge Maxx Cable Thermal protection: 2-ge thermal shutdown Case size (l/w/h): 2.19" x 1.54" x 1.3" (55 x 39 x 33mm) Weight: 3.17oz (90g) Velineon 3500 Type: Sensorless brushless RPM/volt: 3500 (10-turn) Magnet type: Ultra High-Temperature, sintered neodymium Connection type: TRX 3.5mm bullet connectors Wire Size: 12-gauge Maxx Cable w/ solder tabs Current Ratings: 65A constant; 100A peak/burst Max RPM: 50,000 Diameter: 1.42" (36mm) (540 size) Length: 2.165"(55mm) Weight: 9.24oz (262g)

2.095,-

2.395,-

-13%

Hovedbilde Traxxas 2530 Bulkhead Front Black

Traxxas 2530 Bulkhead Front Black

Art.nr: TRX 2530

Copied

This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles. The front suspension arm hinge pins pass through this piece. FEATURES: Black nylon construction INCLUDES: One front bulkhead REQUIRES: Nothing. This is a direct replacement part. SPECS: Length: 73.6mm (2.90") Width: 41mm (1.62") Height: 29mm (1.14") COMMENTS: This part is used on the following vehicles: Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede, Rustler XL and Stampede XL.

Hovedbilde Traxxas 2530-BLK Bulkhead Front Black

Traxxas 2530-BLK Bulkhead Front Black

Art.nr: TRX 2530-BLK

Copied

This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles. The front suspension arm hinge pins pass through this piece. FEATURES: Black nylon construction INCLUDES: One front bulkhead REQUIRES: Nothing. This is a direct replacement part. SPECS: Length: 73.6mm (2.90") Width: 41mm (1.62") Height: 29mm (1.14") COMMENTS: This part is used on the following vehicles: Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede, Rustler XL and Stampede XL.

79,-

89,-

-11%

Hovedbilde Traxxas 2530-GRAY Bulkhead Front Gray

Traxxas 2530-GRAY Bulkhead Front Gray

Art.nr: TRX 2530-GRAY

Copied

This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles. The front suspension arm hinge pins pass through this piece. FEATURES: Gray nylon construction INCLUDES: One front bulkhead REQUIRES: Nothing. This is a direct replacement part. SPECS: Length: 73.6mm (2.90") Width: 41mm (1.62") Height: 29mm (1.14") COMMENTS: This part is used on the following vehicles: Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede, Rustler XL and Stampede XL.

79,-

89,-

-11%

Hovedbilde Traxxas 2530A Bulkhead Front Gray

Traxxas 2530A Bulkhead Front Gray

Art.nr: TRX 2530A

Copied

This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles. The front suspension arm hinge pins pass through this piece. FEATURES: Gray nylon construction INCLUDES: One front bulkhead REQUIRES: Nothing. This is a direct replacement part. SPECS: Length: 73.6mm (2.90") Width: 41mm (1.62") Height: 29mm (1.14") COMMENTS: This part is used on the following vehicles: Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede, Rustler XL and Stampede XL.

79,-

Hovedbilde Traxxas 3790 Gear Adaptor Fixed 2WD

Traxxas 3790 Gear Adaptor Fixed 2WD

Art.nr: TRX 3790

Copied

Gear adapter, fixed Take the guesswork out of setting gear mesh and ensure rock solid hold with Traxxas fixed gear adapters. Compatible with all Traxxas 2WD models including Slash, Bandit, Rustler, and Stampede family models. Includes 5 adapters that cover 7 popular gearing combinations.

59,-

Hovedbilde Traxxas 2532 Fiberglass Tie Bar

Hovedbilde Traxxas 2532 Fiberglass Tie Bar

Traxxas 2532 Fiberglass Tie Bar

Art.nr: TRX 2532

Copied

This is a Firberglass Tie Bar by Traxxas for the SRT FEATURES: Fiberglass Construction INCLUDES: One Tie Bar REQUIRES: Suspension Pins TRX 2640 SPECS: Length: 98.4 mm (3.875") Width: 7.9 mm (0.3125") Thickness: 2.0 mm (0.082") COMMENTS: None

49,-

59,-

-17%

Viser 101 til 125 (av 139 produkter)