Hopp til innhold

Stampede VXL

Populært i denne kategorien

 
Art.nr: TRX 3636X
Copied
These are the Traxxas optional Aluminum Steering Blocks for the                        Rustler, Stampede and Bandit. FEATURES: Aluminum construction           Anodized red in color INCLUDES: One Left and Right Alloy Steering Block           Four 5x11mm Metal Bearings REQUIRES: Installation into Vehicle

399,-

429,-

KJØP
-7%
Art.nr: TRX 3643G
Copied
Camber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)

439,-

459,-

KJØP
-4%
Art.nr: TRX 3643X
Copied
Camber links, front (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)

439,-

459,-

KJØP
-4%
Art.nr: TRX 3650
Copied
Traxxas 3650 Wheelie bar mount w/ LED housings (for use with #9495 Magnum 272R™ transmission) (requires light kit #3794 (2WD Rustler or Bandit) or #3694 (2WD Stampede), or #3795 light harness and #2263 BEC Y-harness (2WD Rustler, Bandit, or Stampede) Replacement wheelie bar mount allows 3794, 3694, or 3795 LED light kits to be used on Magnum 272R™ transmissions. Accessory part for these models: Bandit® VXL Rustler® VXL Stampede® VXL

99,-

KJØP
Art.nr: TRX 3652A
Copied
This is the optional Aluminum Rear Stub Axle Housing for the                     Traxxas Rustler, Stampede, and Bandit. FEATURES: 6061-T6 Aluminum Construction           Anodized Blue in Color INCLUDES: Two Aluminum Rear Stub Axles           Four 5x11mm Bearings REQUIRES: Installation into Vehicle

379,-

429,-

KJØP
-12%
Art.nr: TRX 3652G
Copied
This is the optional Aluminum Rear Stub Axle Housing for the  Traxxas Rustler, Stampede, and Bandit.     FEATURES 6061-T6 aluminum construction, anodized green in color   INCLUDES Two Aluminum Rear Stub Axles  Four 5x11mm Bearings

379,-

429,-

KJØP
-12%
Art.nr: TRX 3652P
Copied
This is the optional Aluminum Rear Stub Axle Housing for the  Traxxas Rustler, Stampede, and Bandit.     FEATURES 6061-T6 aluminum construction, anodized pink in color   INCLUDES Two Aluminum Rear Stub Axles  Four 5x11mm Bearings

379,-

429,-

KJØP
-12%
Art.nr: TRX 3652X
Copied
This is the optional Aluminum Rear Stub Axle Housing for the                     Traxxas Rustler, Stampede, and Bandit. FEATURES: Aluminum construction           Anodized red in color INCLUDES: Two Aluminum Rear Stub Axles           Four 5x11mm Bearing REQUIRES: Installation into Vehicle

379,-

429,-

KJØP
-12%
Art.nr: TRX 3672
Copied
Wheels, chrome (2.2'') (rear) (2)   Dress up the look of your Traxxas model with these durable nylon wheels with a polished chrome finish. Dyeable nylon wheels are also available allowing you to pick your own color.

69,-

KJØP
Art.nr: TRX 3673
Copied
Wheels, chrome (2.2'') (front) (2) Dress up the look of your Traxxas model with these durable nylon wheels with a polished chrome finish. Dyeable nylon wheels are also available allowing you to pick your own color.

69,-

KJØP
Art.nr: TRX 3674
Copied
These are REAR nylon rims for the Traxxas electric Rustler, electric Stampede, and any other Traxxas vehicles which use a hex-style drive washer.  These will NOT work on the Nitro Rustler or Nitro Stampede--use TRX 1972 on those. * Includes: (2) white  nylon rear rims (aka wheels) * Features: dyeable white nylon construction           8-hole design           hex-drive hub system (drive hubs not included- TRX 1654) * Specs: 2.2" diameter        1.9" width * Comments: The front set of rims is TRX 3675. The only difference between these           two rims is the internal offset is greater on the rears.

55,-

KJØP
Art.nr: TRX 3675
Copied
12 mm hex. These are FRONT nylon rims for the Traxxas electric Rustler, electric Stampede, and any other Traxxas vehicles which use a hex-style drive washer.  These will NOT work on the Nitro Rustler or Nitro Stampede--use TRX 1974 on those. * Includes: (2) white  nylon front rims (aka wheels) * Features: dyeable white nylon construction           8-hole design           hex-drive hub system (drive hubs not included- TRX 1654) * Specs: 2.2" diameter        1.9" width * Comments: The rear  set of rims is TRX 3674. The only difference between these           two rims is the internal offset is greater on the rears.

55,-

KJØP
Art.nr: TRX 3677
Copied
This is an optional Wheelie Bar Mount for the Traxxas                    Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, black in color           Installs at rear of chassis to hold wheelie bar arm and wheels in             place INCLUDES: Assembled optional Wheelie Bar Mount with mounting instructions and             hardware REQUIRES: Wheelie Bar Arm                   Wheels and Axles

49,-

KJØP
Art.nr: TRX 3677A
Copied
This is the Green Wheelie Bar Mount for the Traxxas Monster Jam Series Vehicles FEATURES: Composite plastic construction           Green in color INCLUDES: One wheelie bar           Mounting hardware           Instructions REQUIRES: Installation on to Monster Jam vehicle

49,-

KJØP
Art.nr: TRX 3677P
Copied
Information Fits: Traxxas Slash (2WD) Traxxas Slash Dakar / Robby Gordon Traxxas Ford F-150 SVT Raptor Traxxas Bandit Traxxas Bandit VXL Traxxas Rustler Traxxas Rustler VXL Traxxas Stampede (2WD) Traxxas Stampede VXL (2WD) Traxxas Skully Traxxas Craniac Traxxas BIGFOOT  

49,-

KJØP
Art.nr: TRX 3677X
Copied
This is an optional Wheelie Bar Mount in Blue for the Traxxas  Electric Stampede, Rustler and Bandit.     FEATURES Constructed of hardened plastic, blue in color  Installs at rear of chassis to hold wheelie bar arm and wheels in  place   INCLUDES Assembled optional Wheelie Bar Mount with mounting instructions and  hardware   REQUIREMENTS Wheelie Bar Arm   Wheels and Axles

45,-

KJØP
Art.nr: TRX 3678
Copied
This is an optional Wheelie Bar for the Traxxas                    Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, black in color           Installs at rear of chassis to prevent vehicle from flipping over             during wheelies INCLUDES: Assembled optional Wheelie Bar with mounting instructions and             hardware REQUIRES: Fastening to rear of chassis

209,-

229,-

KJØP
-9%
Art.nr: TRX 3678A
Copied
         This is an optional Wheelie Bar in Green for the Traxxas                    Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, neon green in color           Installs at rear of chassis to prevent vehicle from flipping over             during wheelies INCLUDES: Assembled optional Wheelie Bar with mounting instructions and             hardware REQUIRES: Fastening to rear of chassis

179,-

KJØP
Art.nr: TRX 3678P
Copied
Information Fits: Traxxas Bandit Traxxas Bandit VXL Traxxas Rustler Traxxas Rustler VXL Traxxas Stampede (2WD) Traxxas Stampede VXL (2WD) Traxxas Skully Traxxas Craniac Traxxas BIGFOOT

179,-

KJØP
Art.nr: TRX 3678X
Copied
This is an optional Wheelie Bar in Blue for the Traxxas                    Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, blue in color           Installs at rear of chassis to prevent vehicle from flipping over             during wheelies INCLUDES: Assembled optional Wheelie Bar with mounting instructions and             hardware REQUIRES: Fastening to rear of chassis

179,-

KJØP
Art.nr: TRX 3694
Copied
Traxxas 3694 LED Lights Front and Rear Kit Complete Stampede 2WD LED light set, complete (includes front and rear bumpers with LED lights & BEC Y-harness) (fits 2WD Stampede®) Traxxas LED light kits are built tough, with factory fit and finish for easy installation. Designed specifically for the Stampede, the kit includes 4 brilliant white forward-facing LEDs and two rear-facing red LEDs to enhance rear visibility. The kit is fully waterproof, and includes everything needed for installation. (Rear bumper not compatible with Magnum 272R transmission.)  

479,-

499,-

KJØP
-4%
Art.nr: TRX 3695
Copied
Utgått og byttet med TRX 3695A Traxxas 3695 - Pro-Built 2WD Transmission Transmission, complete (fits 1/10-scale 2WD Rustler®, Bandit, Stampede®, Slash) As you probably know, Traxxas makes high-quality replacement parts for every vehicle that we sell. This makes it easy to keep your model running in peak form. For even faster, more convenient repairs and maintenance, Traxxas now offers Pro-BUILT™ components for the best-selling 2WD and 4X4 models, including E-Revo, Bandit, Rustler, Stampede, Slash, and Unlimited Desert Racer. Pro-BUILT components allow you to replace your model’s differential or transmission as a complete unit, no assembly required. Each Pro-BUILT component arrives ready-to-install, precisely assembled to Traxxas’ exacting standards and lubricated with factory-certified grease or oil. Pro-BUILT components save time and make it easy to restore like-new performance with factory-fresh parts in the driveline, where precision counts most. Pro-BUILT components ensure your model delivers all the performance, durability, and fun you expect from Traxxas. Fits: Bandit VXL Bandit Bigfoot® No. 1 Officially Licensed Replica Bigfoot® Officially Licensed Replica Ford F-150 Raptor Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Stampede® VXL Stampede®

KJØP
Art.nr: TRX 3695A
Copied
Traxxas 3695A - Pro-Built 2WD Transmission Transmission, complete (fits 1/10-scale 2WD Rustler®, Bandit, Stampede®, Slash) As you probably know, Traxxas makes high-quality replacement parts for every vehicle that we sell. This makes it easy to keep your model running in peak form. For even faster, more convenient repairs and maintenance, Traxxas now offers Pro-BUILT™ components for the best-selling 2WD and 4X4 models, including E-Revo, Bandit, Rustler, Stampede, Slash, and Unlimited Desert Racer. Pro-BUILT components allow you to replace your model’s differential or transmission as a complete unit, no assembly required. Each Pro-BUILT component arrives ready-to-install, precisely assembled to Traxxas’ exacting standards and lubricated with factory-certified grease or oil. Pro-BUILT components save time and make it easy to restore like-new performance with factory-fresh parts in the driveline, where precision counts most. Pro-BUILT components ensure your model delivers all the performance, durability, and fun you expect from Traxxas. Fits: Bandit VXL Bandit Bigfoot® No. 1 Officially Licensed Replica Bigfoot® Officially Licensed Replica Ford F-150 Raptor Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Stampede® VXL Stampede®

899,-

999,-

KJØP
-10%
Art.nr: TRX 3725X
Copied
This is the Battery Expansion Kit               for the Traxxas Rustler, Bandit and Stampede. FEATURES: Metal construction           Allows for installation of taller multi-cell battery packs INCLUDES: Foam, battery posts and screws REQUIRES: Installation on the vehicle SPECS:    Height: 1.41" (36mm)  

69,-

Ikke på lager
Art.nr: TRX 3737
Copied
This is the optional 39mm Aluminum Front Turnbuckle Set from Traxxas. FEATURES: Anodized aluminum construction, red in color           Black nylon ball ends and steel link set INCLUDES: One 39mm red aluminum turnbuckle set with instructions REQUIRES: Installation onto vehicle  

69,-

KJØP
Viser 101 til 125 (av 211 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png