Hopp til innhold
-4%

Traxxas 3643X Turnbuckle Complete Alu Blue Camber Link 83mm (2)

Art.nr: TRX 3643X

439,-

459,-

- 4%
Traxxas

Traxxas

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Camber links, front (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 3643G
Copied
Camber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)

439,-

459,-

KJØP
-4%
Art.nr: TRX 3643R
Copied
Camber links, front (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1)

439,-

459,-

KJØP
-4%
Art.nr: TRX 3643
Copied
These are the Traxxas 49mm Turnbuckle Camber Links                 for the Bandit, Rustler VXL and Stampede VXL. FEATURES: Metal and Nylon Construction           Silver and Black in Color           Assembled w/Rod Ends INCLUDES: Two rear 49mm (82mm center to center) turnbuckles REQUIRES: Installation on the vehicle

89,-

Ikke på lager

Kunder kjøpte også

This is a package of six 3x15mm Traxxas Button Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x15mm button head screw is required INCLUDES: Six 3x15mm Traxxas Button Head Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:  15mm           Diameter: 3mm

35,-

KJØP
Drag link, machined 6061-T6 aluminum (blue-anodized)

119,-

129,-

KJØP
-8%
This is the optional Aluminum Motor Mount Plate for the Traxxas Slash 4x4. FEATURES: 6061-T6 aluminum construction           Anodized blue in color INCLUDES: One motor mount assembled with a 3x6mm flat head machine screw           One 3mm locknut REQUIRES: Fastening to chassis and installing motor components and driveshaft SPECS:    Length: 56mm (2.2")           Width: 50mm (1.97") at widest point

185,-

KJØP
This is the optional Blue Aluminum Motor Mount for the                             Traxxas Slash 4X4 FEATURES: 6061-T6 aluminum construction, blue in color   INCLUDES: One blue anodized motor mount and hardware.   REQUIRES: Installation following original kit manual    

479,-

499,-

KJØP
-4%
Shock tower, front, 7075-T6 aluminum (blue-anodized) (1)/ body mount bracket (1)

319,-

349,-

KJØP
-9%
Shock tower, rear, 7075-T6 aluminum (blue-anodized) (1)/ body mount bracket (1)

319,-

349,-

KJØP
-9%
This is the optional Generation 3 54T Slipper Unit from Robinson Racing for the Traxxas Slash 4x4. FEATURES: Steel and aluminum construction INCLUDES: One High Performance Slipper Kit with: One 54T Spur Gear Aluminum Back Plate Hex Slipper Pad One 7x13mm Bearing One Aluminum Spacer One Brass Bushing REQUIRES: Installation on the vehicle SPECS:    Tooth: 56T Outer Diameter: 44.5mm (1.75") Inner Diameter: 5mm (0.20")       (11)

759,-

KJØP
NB! Traxxas har byttet delenummer fra TRX 6830 til TRX 6830X   This is the Front Bulkhead for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction           Black in color INCLUDES: One front bulkhead REQUIRES: Installation on chassis

75,-

Ikke på lager
This is the Rear Bulkhead for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction           Black in color INCLUDES: One rear bulkhead REQUIRES: Installation on Slash

75,-

KJØP
Shock caps, aluminum (pink-anodized) (4) (fits all Ultra Shocks)   Accessory part for these models: Bandit VXL Bandit E-Maxx Brushless E-Maxx Ford Fiesta® ST Rally Ford Raptor Nitro 4-Tec Nitro Rustler Nitro Slash Nitro Sport Nitro Stampede Rally VXL Rustler VXL Rustler Slash 4X4 Platinum Slash 4X4 Ultimate Slash 4X4Slash VXL Slash Stampede 4x4 VXL Stampede 4x4 Stampede VXL Stampede T-Maxx Telluride 4x4 Bandit VXL Bandit Bigfoot® No. 1 Officially Licensed Replica Bigfoot® Officially Licensed Replica Craniac® Ford F-150 Raptor Rustler VXL Rustler Skully Slash VXL Slash Stampede VXL Stampede

179,-

189,-

KJØP
-5%
Yeah Racing HD Tool Steel Rear Universal Drive Shafts for Traxxas 1/10 Slash Stampede 4X4 Blue HD Universal drive shafts for Traxxas's 4x4 version of Slash and Stampede, made from "Tool Grade Steel", giving good tensile strength. Whilst the middle sleeve is made from Aluminum to keep weight low giving a good balance between weight and strength!       Features: For: Traxxas 1/10 Slash Stampede 4X4 Material: Steel/Aluminum   Includes: Universal Drive Shafts (2 pcs) Accessories (1 pack)

379,-

399,-

KJØP
-5%
Yeah Racing HD Tool Steel Front Universal Drive Shafts for Traxxas 1/10 Slash Stampede 4X4 Blue HD Universal drive shafts for Traxxas's 4x4 version of Slash and Stampede, made from "Tool Grade Steel", giving good tensile strength. Whilst the middle sleeve is made from Aluminum to keep weight low giving a good balance between weight and strength!   Features: For: Traxxas 1/10 Slash Stampede 4X4 Material: Steel/Aluminum   Include: Universal Drive Shafts (2 pcs) Accessories (1 pack) 

369,-

389,-

KJØP
-5%
This is a shock rebuild kit for 2 Traxxas black plastic shocks.  Includes: 4 E-clips   2 C-clips   2 O-rings   8 Washers   2 Diaphrams

35,-

KJØP
This is the Left and Right Suspension Arms for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction           Front or rear application INCLUDES: One left suspension arm           One right suspension arm REQUIRES: Installation on suspension assembly SPECS:    Length: 100mm (3.94")           Width: 45mm (1.77")           Thickness: 11.5mm (0.45") TRX 3655X

129,-

139,-

KJØP
-7%
Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)

419,-

KJØP
Shocks, GTR long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

429,-

449,-

KJØP
-4%
Utgått! Erstattet med TRX 3655-BLUE Suspension arms, blue, front/rear (left & right) (2) (heavy duty, cold weather material)

This is a pair of Long Shock Springs for the                    Traxxas GTR Long Shocks. FEATURES: Steel construction, white in color           0.767 (black) compression rating INCLUDES: Two XX-Long Shock Springs SPECS:    Length: 1.8" (47mm)           Wire Diameter: 0.039" (1mm)

69,-

KJØP
These are the optional 1.5° Aluminum Rear Stub Axle Carriers from Traxxas. FEATURES: Machined aluminum construction           Anodized blue in color INCLUDES: Two Aluminum Rear Stub Axle Carriers           Two 3x3mm Set Screws           Two 3x12mm Flat Phillips Head Screws           Two 3x31.5mm Pins           Six 6mm E-Clips REQUIRES: Installation into Vehicle

329,-

349,-

KJØP
-6%
This is a optional Traxxas Aluminum Caster Block Set, and is intended for use with the Traxxas Slash 4x4 truck. These caster blocks are CNC Machined from 6061 Aluminum, and will increase the durability of the front end of the Slash 4x4, especially when paired with the Traxxas Aluminum Steering Block Set (TRX6837X)

469,-

499,-

KJØP
-6%
These are the optional Aluminum Left and Right Steering Blocks                        for the Slash 4x4 from Traxxas. These will increase the durability of the front end of the Slash 4x4, especially when paired with the Traxxas Aluminum Caster Block Set (TRX6832X).   FEATURES: 6061 T-6 aluminum construction           Anodized blue in color INCLUDES: One Left Steering Block           One Right Steering Block REQUIRES: Installation on steering assembly

349,-

389,-

KJØP
-10%
New TRX-4 1/10 Scale And Trail Crawler Take the Path Less Traveled. The Traxxas TRX-4 Scale and Trail Crawler is an all-new Traxxas design that instantly obsoletes the status quo with greatly expanded features, versatility, and capability. In other words, we built it the Traxxas way, rugged, powerful, and ready for fun!  Check out the features and images below to get the latest scoop on this incredible machine. Ultimate Ground Clearance The TRX-4 Scale and Trail Crawler is equipped right out of the box with Traxxas' game-changing portal axle set. Portal axles lift the truck at the wheels for huge center pumpkin ground clearance. In order to achieve the same clearance with straight axles (and not get stuck), your tires would have to be over an inch taller than the TRX-4's tires. Straddling boulders with ease, the TRX-4 chassis definitely takes the path less travelled and simply leaves all the others behind. Torque Twist Eliminated The portal axles use gear reduction right at the wheels that dramatically reduces undesirable torque twist. Total axle gear reduction is over twice non-portal designs. The Titan 550 motor torque is translated into straight, powerful, forward motion, rather than wasted energy twisting your rig right off the rocks. Improved Geometry Portal axle geometry raises the axle link mounts and center driveshaft, greatly reducing critical driveshaft and suspension link angles. This means less strain on the driveshafts, and the higher suspension links provide greater clearance with less scraping and dragging across the rocks. The steering drag link and tie rod are also raised up and out of harm's way. Rigid Steel Frame A heavy-duty formed-steel ladder frame with molded cross members creates an extremely rigid backbone that lets the suspension do the work it was designed to do. You’ll feel the difference on trails where the elimination of chassis flex allows for precise wheel placement when navigating technical terrain. Remote Locking Differentials Traxxas gives you the versatility to lock and unlock the front and rear differentials to suit your driving needs directly from your transmitter. Leave the differentials unlocked for relaxed driving on the trail with smooth, tight turning and better handling at high speeds. When the trail gets technical, lock the front and rear differentials, or just the front, for superior grip over extreme terrain. Our patented design has been proven rugged and capable in the Traxxas Summit. New sleeved micro cables control the differential action for scale appearance, without limiting the huge suspension articulation. 45° Steering Angle Traditional crawlers sacrifice turning radius for traction. The TRX-4’s remote locking differentials disengage to take full advantage of its superior 45 degree steering angle. Once you clear the obstacle, re-engage the differentials for ultimate traction. Hi/Low Range Transmission When the going gets tough, use your transmitter to shift into low range for incredible 4-wheel drive pulling torque. Shift into high range for blasting down the trail. The plush suspension design absorbs rough terrain with ease and delivers outstanding scale appearance. Unmatched versatility makes the TRX-4 Scale and Trail Crawler adaptable to just about any situation or driving style. Metal Gear Digital Servo A new full-metal gear digital servo gives you the durability and steering authority you need to confidently and reliably power through tough situations. Waterproof Traxxas was the first to bring you fully waterproof RC vehicles years ago with our innovative designs. The TRX-4 Scale and Trail Crawler is fully waterproof for how you like to really play, not “splash resistant.” There is a big difference. Traxxas’ patented innovation gives you the freedom to tackle creeks, snow, and mud without worrying about water in your electronics. Scale Detail The TRX-4 Trail and Scale is being shown with the legendary Land Rover Defender body, complete with exciting scale details for an authentic 4-wheelin’ experience. We’ve included a functional spare wheel and tire, an off-road jack, and spare fuel canisters. Secure your trail gear in the included roof basket. There’s even a snorkel for taking the waterproof TRX-4 through creek crossings. The rugged bumpers provide clearance and protection and are equipped with recovery D-rings. The front bumper is designed to be compatible with many popular off-road accessories. Inner Fenders The scale details did not stop with the body. We went underneath to install detailed inner fenders that integrate with the scale look of the floor pans and shock towers, keeping rocks, mud, and twigs out of the chassis. The inner fenders are also equipped with pockets to install our optional LED rock light kit (sold separately) to light up the night trail, casting light right where it’s needed. The rock lights make changing a “flat tire” on the trail a breeze! ;-) Integrated rock sliders help protect the body from damage. Cruise Control The Traxxas TQi radio system is equipped with cruise control for long-distance treks. Set your speed using the transmitter and then use the multi-function knob to fine-tune it faster or slower to precisely match the pace of your caravan of trail explorers. Cruise control makes it easy and comfortable for the TRX-4 Scale and Trail Crawler to be your companion for hours of driving fun and exploration. 3S Power System The new XL-5 HV electronic speed control brings 3S LiPo capability for stronger, more efficient running. New speed control profiles have been added for smooth and precise control. A new Trail profile facilitates smooth driving for most of your adventures, while a new Crawl profile introduces hill hold and instant reverse for extremely technical courses. Either will help you navigate obstacles with ease, right from the start. Long run times, up to 2 hours, are possible with a Traxxas 3S 5000mAh iD LiPo battery pack! Canyon Trail 1.9" Tires The 1.9" Canyon Trail tires and tuned foam inserts are super-soft and grippy to deliver superior bite on rocky surfaces with convincing scale realism. The 12 mm steel hex drive makes the TRX-4 chassis compatible with popular 1.9" wheel and tire combinations. Traxxas Tough Leave the tools in the bag! The Traxxas TRX-4 chassis is built to handle the rigors of remote locations and all-day driving fun. The foundation begins with a pair of 1.5 mm thick steel frame rails. Large diameter steel links and heavy-duty, extra-wide rod ends keep the suspension firmly mounted. Hardened steel CV-style half-shaft joints are ultra reliable, while the brushless-ready steel portal axle and transfer case gears are smooth and quiet. Traxxas’ composite materials have been refined over three decades for the ultimate in strength and durability. Aluminum GTS Shocks All new oil-filled coil-over GTS shocks were created exclusively for the TRX-4 chassis. These silver-anodized aluminum units deliver silky-smooth damping performance and feature threaded shock bodies for easy ride height adjustments. The convincing scale realism looks great and they perform even better with an O-ring cap seal and dual X-ring shaft seals. Extreme Capability Steep approach angles front and rear allow the TRX-4 Scale and Trail Crawler to tackle big obstacles head on. The front motor design biases weight forward for superior climbing ability compared to other designs. More Details Coming Soon Photos and specifications subject to change. Officially Licensed Product. Land Rover Trademarks used under license to Traxxas, LP. Pending licensing approval.

7.495,-

Denne er erstattet med TRX 8095 Hit the trail day or night with rock-solid reliability Genuine Traxxas Complete LED Light Kit for the TRX-4 are engineered with the same outstanding quality and attention to detail as the truck itself. Precise Traxxas fit and finish makes installation easy and fun for any skill level, and the waterproof design allows for all-weather adventure after the sun goes down. Sealed waterproof design Engineered by Traxxas for direct fit on the Land Rover Defender body with tidy and secure wire management 3-in-1 wire harness operates all lights with a single connection between body and chassis Traxxas LED lighting module: Regulated to provide consistent and reliable power output with batteries from NiMH to 3S LiPo Eliminates overheating, glitching, and other electronics issues common with unmatched aftermarket systems Integrated High/Low brightness switch provides two output levels for the RIGID® Light Bar and the headlights LED Light Bar with High/Low Brightness Switch Designed to the rigorous standards of both Traxxas and leading lighting manufacturer RIGID®, the LED light bar utilizes surface mount LED technology and a custom clear lens for unsurpassed realism. The integrated switch controls the brightness of both the light bar and the headlights. The light bar bolts directly to the Land Rover Defender ExoCage, but the universal mounting tabs also allow easy custom installation on a variety of surfaces. LED Headlight and Tail Light Harness Designed specifically for the Land Rover Defender body, the LED headlight and tail light harness is a direct replacement for the factory lens components. Fourteen total bright white LEDs bring the headlights to life, while secondary lights illuminate the amber parking lights and red tail lights for a true scale look. Available in: #8030 and #8027 Light up the trail with LED Rock Lights Traxxas LED Rock Lights install directly into the inner fenders of the TRX-4 and are positioned to help illuminate obstacles for trouble-free nighttime crawling. The kit includes two LED modules per wheel, ensuring a flood of light throughout the underside of the truck. Down lighting in the wheel wells combined with the headlight/taillight kit make it easy to see the orientation of the vehicle in the dark. Available in: #8030 and #8026 Lighting Module Provides Stable Power Pack After Pack Adding LED lighting components to your TRX-4 is simple with the Traxxas waterproof power supply. This unit provides stable, regulated output with batteries ranging from NiMH to 3S LiPo. The power supply connects to the receiver and electronic speed control to provide single-point control of your lighting components. The lights turn on when the receiver is powered on. The included 3-in-1 wire harness allows the full lighting setup to be connected with a single plug.

KONTAKT
 This is a pair of Long GTR Shock Shafts from Traxxas. FEATURES: Fits the front shocks of the LiPo equipped Traxxas Slash 4x4 Ultimate           TiN (titanium nitride) coating for smooth operation INCLUDES: Two Long GTR TiN coated Shock Shafts

129,-

KJØP
This is a Rod End Set for the Traxxas Revo                     used with the optional GTR shocks. FEATURES: Plastic construction           Black in color INCLUDES: Six Rod Ends REQUIRES: Assembly to vehicle SPECS:    Length:              18.35mm (0.72")           Width at ball joint: 10.35mm (0.40") COMMENTS: If Pivot Balls are needed, use TRX 5355.

25,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png