Hopp til innhold

Bandit XL-5

Populært i denne kategorien

 
Art.nr: TRX 2648
Copied
Screws, 3x12mm countersunk self-tapping (6)

25,-

KJØP
Art.nr: TRX 2649
Copied
Screws, 3x15mm countersunk self-tapping (6)

25,-

KJØP
Art.nr: TRX 2675
Copied
Screws, 3x10mm roundhead self-tapping (6)  

25,-

KJØP
Art.nr: TRX 3647
Copied
This is the Traxxas Flanged Nylon Locking Nuts. FEATURES: Steel serrated construction INCLUDES: Eiqht 4mm flanged nylon locking nuts SPECS:    Outside diameter: 7mm

39,-

Ikke på lager
Art.nr: TRX 2676
Copied
Screws, 3x12mm roundhead self-tapping (6)

25,-

KJØP
Art.nr: TRX 3760A
Copied
Denne passer til: -Bandit XL5/VXL foran. -Rustler XL5/VXL foran. -og til flere Traxxas biler. Sjekk manualen til din bil. This is a pair of the Long Ultra Shocks from Traxxas                       for the Bandit. FEATURES: Gray composite bodies           Preload spacers and two red springs INCLUDES: Two ultra long grey shocks with bottle of silicone             oil and assembly diagram REQUIRES: Assembly COMMENTS: Two pairs are required if replacing all shocks.  

259,-

289,-

KJØP
-10%
Art.nr: TRX 2734
Copied
This is a package of cable ties.     FEATURES Easily holds wires in place & other small items INCLUDES 10 Black cable ties SPECIFICATIONS 3 1/16" long (76mm)  3/32" wide (2.5mm)

25,-

KJØP
Art.nr: TRX 2735
Copied
This is the replacement front bumper for the TRX-1 and TRX-3.  It is molded of white plastic.  It is 2 3/8" long. INCLUDES:  1- front bumper

39,-

KJØP
Art.nr: TRX 3965
Copied
This is a 6 pack of Traxxas 2.5X8mm Cap Head Screws. FEATURES: Steel construction           Black in color           Cap head design INCLUDES: (6) 2.5X8mm cap head screws SPECS:    Length:         5/16"   (8mm)           Diameter:       3/32"   (2.5mm

35,-

KJØP
Art.nr: TRX 2753X
Copied
These are the Rear Stub Axles                  for the Traxxas Bandit, Stampede 2WD and Rustler. FEATURES: Metal construction, black and silver in color INCLUDES: Two rear stub axles and pins SPECS:    Length: 1.65" (42mm)           Diameter: .51" (13mm) at largest point

59,-

79,-

KJØP
-25%
Art.nr: TRX 3167
Copied
Screws, 4x15mm countersunk machine (6)

25,-

KJØP
Art.nr: TRX 3185X
Copied
Screws, 3x8mm washerhead machine (large head for motor mount) (6)

29,-

KJØP
Art.nr: TRX 3186
Copied
These are 3x12mm Washerhead Machined Screws from Traxxas FEATURES Steel construction Phillips drive insert Flanged pan head Replacement parts designed for the Traxxas Nitro Hawk INCLUDES(6) Screws SPECIFICATIONS Diameter: 3mm Length: 12mm

25,-

KJØP
Art.nr: TRX 3187
Copied
Screws, 3x15mm washerhead machine (6)

25,-

KJØP
Art.nr: TRX 3195
Copied
This is the 22 tooth, hardened steel top drive gear. Fits: Traxxas Rustler VXL/XL-5 Stampede VXL/XL-5 Bandit VXL/XL-5 1/10 Slash 2WD

39,-

Ikke på lager
Art.nr: TRX 3286
Copied
Screws, 3x12mm washerhead self-tapping (6)

25,-

KJØP
Art.nr: TRX 3288
Copied
Screws, 3x15mm washerhead self-tapping (6)

25,-

KJØP
Art.nr: TRX 3290
Copied
Screws, 3x8mm washerhead self-tapping (6)

25,-

KJØP
Art.nr: TRX 3625
Copied
Mounting plate, speed control (XL-5, XL-10) (fits into Bandit, Rustler, Stampede and 4-Tec)

35,-

KJØP
Art.nr: TRX 3628
Copied
This is the Receiver Box for use on the               Traxxas Stampede, Rustler, and Bandit Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Receiver Box           One Rubber Seal           Foam Padding           Two 2.5x8mm Cap Head Screws           Two 3x10mm Cap Head Screws           Two 2.5x10mm Cap Head Screws           One Tube of Grease           Instruction sheet REQUIRES: Installation on the vehicle SPECS:    Length: 78mm (3.07")           Width: 35mm (1.4")           Height: 33mm (1.3")

145,-

Ikke på lager
Art.nr: TRX 3629
Copied
This is the Receiver Box Seal Kit for the Traxxas Stampede, Rustler, and Bandit. FEATURES Properly seals receiver box to minimize dirt and moisture exposure INCLUDES Silicone grease One Gasket Two Foam Strips Instructions REQUIREMENTS Application to receiver box

49,-

KJØP
Art.nr: TRX 3638X
Copied
This is the stock replacement REAR shock tower for the Traxxas Stampede/Rustler and Bandit FEATURES:    Made from black molded nylon    For the Traxxas Stampede SPECS:    Width at top: 4 5/16"    Width at bottom: 2 1/4"    Thickness: 1/4"    Height: 2 13/16" INCLUDES:    (1) Rear shock tower for the Traxxas Stampede

59,-

KJØP
Art.nr: TRX 8361
Copied
Shock caps (black) (4) (assembled with hollow balls)

59,-

KJØP
Art.nr: TRX 9137-GRAY
Copied
Traxxas 9137-GRAY - Steering blocks, extreme heavy duty, (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit) Replacement left and right steering blocks for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts as well as Traxxas aluminum accessories.

79,-

89,-

KJØP
-11%
Art.nr: TRX 3643
Copied
These are the Traxxas 49mm Turnbuckle Camber Links                 for the Bandit, Rustler VXL and Stampede VXL. FEATURES: Metal and Nylon Construction           Silver and Black in Color           Assembled w/Rod Ends INCLUDES: Two rear 49mm (82mm center to center) turnbuckles REQUIRES: Installation on the vehicle

89,-

Ikke på lager
Viser 76 til 100 (av 147 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png