Traxxas

Traxxas 2735 Front Bumper

Art.nr: TRX 2735

39,-

Traxxas

Traxxas

På lager: 2

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

This is the replacement front bumper for the TRX-1 and TRX-3. It is molded of
white plastic. It is 2 3/8" long.

INCLUDES: 1- front bumper

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

Hovedbilde RPM 81169 RPM Wide Front Bumper for 2WD Bandit, ...

Hovedbilde RPM 81169 RPM Wide Front Bumper for 2WD Bandit, ...

RPM 81169 RPM Wide Front Bumper for 2WD Bandit, ...

Art.nr: 81169

Copied

RPM Wide Front Bumper for 2WD Bandit, Rustler & Stampede - Red Replaces stock Traxxas #2735 Quick Notes: Fits the Electric Stampede, Electric Rustler, Bandit, Nitro Sport, Nitro Stampede & Nitro Rustler Replaces stock Traxxas #2735 Give your favorite Traxxas vehicle added protection with the RPM wide front bumper. This bumper stands six inches wide and adds an extra 1-1/2” worth of bulletproof, RPM protection to the front end of the vehicle. RPM designed this bumper with the backyard basher in mind by making it with our guaranteed unbreakable blend of nylons and is molded in black, blue, green and red. This bumper will help reduce front-end damage during head on collisions with curbs, trees, etc!

99,-

Hovedbilde Traxxas 2735P Front Bumper Pink

Traxxas 2735P Front Bumper Pink

Art.nr: TRX 2735P

Copied

Fits: Traxxas Slash (2WD) Traxxas Slash Dakar / Robby Gordon Traxxas Ford F-150 SVT Raptor Traxxas Bandit Traxxas Bandit VXL Traxxas Rustler Traxxas Rustler VXL Traxxas Stampede (2WD) Traxxas Stampede VXL (2WD) Traxxas Skully Traxxas Craniac Traxxas BIGFOOT

39,-

Kunder kjøpte også

Hovedbilde Traxxas 2072A Gear Set for Servo 2070/2075

Traxxas 2072A Gear Set for Servo 2070/2075

Gear set (for 2070, 2075 servos)

49,-

Hovedbilde Traxxas 6852A Driveshaft assembly, rear, extreme heavy ...

Traxxas 6852A Driveshaft assembly, rear, extreme heavy ...

Driveshaft assembly, rear, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

149,-

169,-

-12%

Hovedbilde Traxxas 2429 Pinion Gear 29T 48P

Traxxas 2429 Pinion Gear 29T 48P

Gear, 29-T pinion (48-pitch)/ set screw

39,-

49,-

-20%

Hovedbilde Traxxas 6846 Steering Linkage 3x20mm Turnbuckle

Traxxas 6846 Steering Linkage 3x20mm Turnbuckle

Linkage, steering (3x20mm turnbuckle) (1)/ rod ends (2)/ hollow balls (2)

45,-

Hovedbilde Traxxas 2444 Camber Link Front 67mm(cc) Complete (2) ...

Traxxas 2444 Camber Link Front 67mm(cc) Complete (2) ...

Turnbuckles, camber link, 47mm (67mm center to center) (front) (assembled with rod ends and hollow balls) (1 left, 1 right)

89,-

Hovedbilde RPM 80402 Shock Shaft Guard Black Traxxas (4)

RPM 80402 Shock Shaft Guard Black Traxxas (4)

Shock Shaft Guards for Traxxas & Durango 1/10th Scale Shocks Quick Notes: – fits Traxxas 1:10 scale Ultra and “Big Bore” shocks – fits Durango 1:10 scale shocks Description Rocks, dirt and debris striking shock shafts lead to dents, dings and burrs, which in turn, leads to torn shock seals. Torn shock seals means leaky shocks and poor shock performance. RPM Shock Shaft Guards shield the shock shaft from those deteriorating elements, prolonging the life of the shock shaft, which improves the long-term performance of the suspension and in turn, prolongs the time between shock rebuilds! RPM Shock Shaft Guards are a simple design, replacing your stock shock spring cup with one that has a thin but tough shield rising up to the base of the shock body, completely blocking debris from striking the shock shaft. The back and sides are open, which prevents debris from building inside the guard as well. The kit comes with replacement oversized shock rod ends, improving durability and consistency on the shock pivot ball. Additionally, we redesigned the top of the rod end so it is square. That square end keys the shock shaft guard for directional control. The front shield of the guard covers over 100 degrees of frontal exposure! RPM Shock Shaft Guards are zero friction protection devices, meaning the guard never touches the working elements of the shock. RPM Shock Shaft Guards are sold in sets of four, including four rod ends for the shocks and are stock replacement items. Nothing more is needed for installation. Check out this partial list of vehicles they will fit: Slash 2wd, Slash 4×4, Stampede 4×4, nitro and electric versions of the Stampede 2wd and Rustler, Bandit, Nitro Sport, T-Maxx & E-Maxx (see tech notes below), and many more including vintage and legacy models. RPM Shock Shaft Guards are available in Black, Green, Blue and our Dyeable White materials. Tech Notes: RPM Shock Shaft Guards fit all Traxxas 1/10th scale molded shocks as well as Traxxas Big Bore shocks but will not fit the Traxxas Jato or GTR shocks. They fit the T-Maxx and E-Maxx but will not work with RPM T/E-Maxx A-arms due to clearance limitations on the upper arm.

129,-

149,-

-13%

Hovedbilde Traxxas 3647 Nuts 4mm Flanged Nylon Locking Steel (8)

Traxxas 3647 Nuts 4mm Flanged Nylon Locking Steel (8)

This is the Traxxas Flanged Nylon Locking Nuts. FEATURES: Steel serrated construction INCLUDES: Eiqht 4mm flanged nylon locking nuts SPECS: Outside diameter: 7mm

39,-

Hovedbilde Traxxas 2426 Pinion Gear 48P 26T w/Screw

Traxxas 2426 Pinion Gear 48P 26T w/Screw

This is a 26 Tooth, 48 Pitch Pinion Gear with Set Screw from Traxxas. FEATURES: Steel construction, silver in color INCLUDES: One 26 Tooth, 48 Pitch Pinion Gear One 3x4mm Set Screw (1.5mm hex size) REQUIRES: Installation SPECS: Length: .42" (10.5mm) Inside Diameter: 1/8" Outside Diameter: .58" (14mm)

39,-

Hovedbilde Traxxas 6773G Tires & Wheels Talon Extreme/RXT Green ...

Traxxas 6773G Tires & Wheels Talon Extreme/RXT Green ...

Tires & wheels, assembled, glued (2.8") (RXT 4X4 green wheels, Talon Extreme tires, foam inserts) (2) (TSM rated)

359,-

379,-

-5%

Hovedbilde Traxxas 5629 Retainer Clip E-Revo

Traxxas 5629 Retainer Clip E-Revo

This is the Retainer Clip for the Traxxas E-Revo. FEATURES: Nylon construction Black in color INCLUDES: Battery Retainer Clip Front Clip Rear Clip Foam Spacer Instruction sheet REQUIRES: Installation on the battery compartment

39,-

Hovedbilde Traxxas 5314 Front/Rear Body Mounts w/Posts & Pins ...

Traxxas 5314 Front/Rear Body Mounts w/Posts & Pins ...

This is the Front and Rear Body Mounts with Body Post for the Traxxas Revo. FEATURES: Black plastic construction "TRX" logo on front body mount INCLUDES: Front and rear body mounts Part #5314 Front and rear body post Part #5314 (4) 2.5X18mm screw pins (1) 4X10mm button head screw REQUIRES: Installation on the Traxxas Revo

139,-

Hovedbilde Traxxas 5352A Heavy Duty Rebuild Kit Revo/Maxx Trucks

Traxxas 5352A Heavy Duty Rebuild Kit Revo/Maxx Trucks

Traxxas 5352A - Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1)) The slipper clutch rebuild kit includes a new steel disc, friction pads (3), spring, pin, 5x8 washer, 4 mm locking nut, and 5 mm locking nut. Fits 5351 pressure plate and hub. Traxxas Slipper Clutch Rebuild Kit Revo/T-Maxx Traxxas Slipper Clutch Rebuild Kit Revo/T-Maxx

99,-

Hovedbilde Traxxas 3959 Spur Gear 0.8P 62T

Traxxas 3959 Spur Gear 0.8P 62T

This is the optional .8 Metric Pitch 62 Tooth Spur Gear for the Traxxas E-Maxx. FEATURES: Nylon construction, black in color .8 metric pitch INCLUDES: One 62T 0.8 metric pitch spur gear REQUIRES: Installation on the vehicle SPECS: Diameter: 2" (51mm) Thickness: .23" (6mm)

39,-

Hovedbilde Traxxas 5643 17T Pinion For 5mm Shaft

Traxxas 5643 17T Pinion For 5mm Shaft

This is a Traxxas 17 Tooth Pinion Gear for a 5mm Motor Shaft. FEATURES: Silver in color Metal construction INCLUDES: (1) 17 Tooth Pinion Gear (1) One 4mmx3.5mm set screw REQUIRES: Installation on motor shaft SPECS: Outer Diameter: 15.5mm (0.61") Inner Diameter: 5mm (0.20") Gear, 17-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw 17-tooth pinion gear (32-pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.

69,-

89,-

-22%

Hovedbilde Traxxas 9492 Idle Gear 30T Magnum 272R Transmission

Traxxas 9492 Idle Gear 30T Magnum 272R Transmission

Traxxas 9492 - Idler gear, 30-tooth/ idler gear shaft (steel)

99,-

119,-

-17%

Hovedbilde Traxxas 9495A Pro Series Magnum 272R Transmission ...

Hovedbilde Traxxas 9495A Pro Series Magnum 272R Transmission ...

Traxxas 9495A Pro Series Magnum 272R Transmission ...

Traxxas Pro Series Magnum 272R Transmission Upgrade Your 2WD Slash, Rustler, Stampede, or Bandit Developed specifically for the hard-hitting Drag Slash, the Pro Series Magnum 272R upgrades key features of the standard Magnum transmission for maximum durability and next-level performance. A new low-profile design, 3.2 mm motor plate and hardened steel top shaft are just the beginning. The Pro Series Magnum 272R represents a complete performance redesign and now it’s available for your standard or VXL 2WD Bandit, Rustler, Stampede, or Slash. QUICK FEATURES ON PRO SERIES MAGNUM 272R TRANSMISSION (#9495A) Redesigned transmission case Reinforced for added strength and rigidity Low-CG design for improved handling Ultra-rigid wheelie bar mount 3.2 mm Aluminum Motor Plate Increases structural rigidity Improves heat dissipation Compatible with fixed gear mesh system Hardened-steel top shaft Press-fit top gear for superior strength and durability Sealed differential Hardened-steel beveled gears Tunable with silicone differential oil Easy access differential Simple removal for tuning and maintenance Pro Series Magnum 272R™ Transmission Upgrade Your Bandit, Rustler, Stampede, or Slash with the Toughest Transmission Available A New Generation of Performance Developed specifically for the hard-hitting Drag Slash, the Pro Series Magnum 272R upgrades key features of the standard Magnum transmission for maximum durability and next-level performance. A new low-profile design, 3.2 mm motor plate and hardened steel top shaft are just the beginning. The Pro Series Magnum 272R represents a complete performance redesign and now it’s available for your standard or VXL 2WD Bandit, Rustler, Stampede, or Slash. QUICK FEATURES ON PRO SERIES MAGNUM 272R TRANSMISSION (#9495A) Redesigned transmission case Reinforced for added strength and rigidity Low-CG design for improved handling Ultra-rigid wheelie bar mount 3.2 mm Aluminum Motor Plate Increases structural rigidity Improves heat dissipation Compatible with fixed gear mesh system Hardened-steel top shaft Press-fit top gear for superior strength and durability Sealed differential Hardened-steel beveled gears Tunable with silicone differential oil Easy access differential Simple removal for tuning and maintenance In-Depth Features Precision Transmission Case The Pro Series Magnum 272R transmission is engineered for strength with its rugged, reinforced case. The case halves engage precisely to seal out dirt and debris, and create a rigid structure to support the motor, suspension arms, and optional wheelie bar. The thick T-6 aluminum motor plate resists flex and acts as a heatsink. All-Metal Internal Gears This race-ready transmission is built for massive torque with high-strength steel input, idler, and differential gears and large-diameter bearings. The input gear is keyed and press fit onto the top shaft for greater precision and strength than a pin-mounted gear. Sealed Beveled-Gear Differential The heavy-duty steel-gear differential is X-ring and gasket-sealed and filled with grease for all-around performance. It's easy to tune the differential's locking action by adding different viscosity silicone oil to suit surface traction. Removable Differential The Magnum 272R's easily removable differential makes maintenance and tuning easier than ever. Disconnect the driveshafts and open the hatch to release the differential in just minutes. MODEL 9495A: Pro Series Magnum 272R™ Transmission Accessory part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica Drag Slash Ford® F-150 Raptor Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Stampede® VXL Stampede®

1.099,-

1.299,-

-15%

Hovedbilde Traxxas 3947X Pinion Gear 17T-32P Hardened Steel

Traxxas 3947X Pinion Gear 17T-32P Hardened Steel

Gear, 17-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw

89,-

99,-

-10%

Hovedbilde Traxxas 3627X 2PC Receiver & Battery Hold Down ...

Traxxas 3627X 2PC Receiver & Battery Hold Down ...

This is the Reciever & Battery Hold-Down Plate for the Traxxas Stampede. FEATURES: Plastic construction, gray in color Metal posts and body clips INCLUDES: One battery hold down One receiver hold down Two metal posts Two body clips Servo tape/adhesive foam pad REQUIRES: Installation on the Stampede

59,-

Hovedbilde Traxxas 2419 Pinion Gear 48P 19T w/Set Screw Steel

Traxxas 2419 Pinion Gear 48P 19T w/Set Screw Steel

This is a Traxxas 19T 48P Pinion Gear. FEATURES: Metal construction Grey in color INCLUDES: One 19T 48P Pinion Gear One Set Screw REQUIRES: Installation

39,-

Hovedbilde Traxxas 6717X Rustler 4x4 Silver/Blue Complete with ...

Traxxas 6717X Rustler 4x4 Silver/Blue Complete with ...

Body Rustler 4x4 Silver/Blue (Complete with Body Mounts) Body, Rustler® 4X4 VXL, Silver/Blue Window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting) Specifications: Car Type: Truck Scale: 1/10 Painted: Yes

639,-

699,-

-9%

Hovedbilde Traxxas 2416 Pinion Gear 48P 16T w/Set Screw

Traxxas 2416 Pinion Gear 48P 16T w/Set Screw

This is the 16 Tooth 48 Pitch Pinion Gear from Traxxas. FEATURES: Steel construction INCLUDES: 16 Tooth 48 Pitch Pinion Gear with set screw REQUIRES: Installing on motor shaft SPECS: Number of Teeth: 16T Pitch: 48 Inner Diameter: 0.12" (3mm)

49,-

59,-

-17%

Hovedbilde Traxxas 2423 Pinion Gear 48P 23T w/Set Screw Steel

Traxxas 2423 Pinion Gear 48P 23T w/Set Screw Steel

This is a 23 Tooth 48 Pitch Pinion Gear By Traxxas FEATURES: Pinion gear with set screw, Silver in color INCLUDES: (1) 23 Tooth 48 Pitch Pinion Gear (1) One 4mmx2mm set screw REQUIRES: Installation SPECS: Outer Diameter: 14mm (9/16") Inner Diameter: 11mm (7/16")

39,-

49,-

-20%

Hovedbilde Traxxas 4728 Pinion Gear 48P 28T

Traxxas 4728 Pinion Gear 48P 28T

Passer på Traxxas 1/16 biler også. This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas 4-Tec. FEATURES: Ideal replacement part for fine tuning your Traxxas 4-Tec 4WD remote control sedan. Metal construction INCLUDES: One Pinion Gear One Set Screw SPECS: Teeth: 28 Pitch: 48

39,-

Hovedbilde Traxxas 4690 Spur Gear 48P 90T

Traxxas 4690 Spur Gear 48P 90T

This is a Traxxas 48P, 90T Spur Gear for models with Torque Control Slipper Clutch. FEATURES: 48 pitch 90 tooth Designed for models with a slipper clutch Black plastic construction INCLUDES: One spur gear SPECS: Pitch: 48 Tooth: 90

49,-

Hovedbilde Traxxas 5830 Chassis Conversion Kit Low CG Slash

Hovedbilde Traxxas 5830 Chassis Conversion Kit Low CG Slash

Traxxas 5830 Chassis Conversion Kit Low CG Slash

This is the optional Low CG Conversion Kit for the 1/10 scale 2WD Traxxas Slash. FEATURES Lowers the chassis 1" (25.4mm) for better handling and greater cornering speed Holds battery and electronics as deep in chassis as possible 45% lower battery position INCLUDES Chassis Lower Chassis Two Nerf Bars Battery Hold Down with Front and Rear Retainers Two Front Shock Springs Hardware and Instructions

439,-

499,-

-12%