Hopp til innhold

Traxxas 2675 Screws 3x10 self-tapping (6)

Art.nr: TRX 2675

25,-

Traxxas

Traxxas

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Screws, 3x10mm roundhead self-tapping (6)

 

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Body clip (mounting clip), angled, 90-degrees (black) (10)

39,-

KJØP
These are 3x6mm Washers from Traxxas. FEATURES: Metal construction INCLUDES: (12) Washers SPECS:    Size:  3x6mm

25,-

30,-

Ikke på lager
-17%
DynoMAX Connector Adapter XT60 (male) - EC3 (female) This is an practical connector adapter for batteries with an XT60 connector where you want to change it to an EC3 connector without soldering etc.   It also works if you have an charge lead with an EC3 connector but you have an vehicle with a XT60 connector system.

39,-

KJØP
3X10mm Counter-tapp Screw. 10 screws in one plastic bag.

25,-

KJØP
Screws, 3x15mm washerhead self-tapping (6)

25,-

KJØP
  Zinc Plated Steel - INCLUDES - 38 - 3mm x 12mm Self Tapping Screws 2 - 3 x 22 Screw pins 1 - 5 x 30 Shaft  

49,-

KJØP
Single Speed Conversion T-Maxx Single-speed conversion kit (Eliminates two-speed mechanism for reduced weight, less rotational mass)

129,-

KJØP
This is a Forward Only Shaft and Gear for the Traxxas T-Maxx. This converts the T-Maxx to Forward Only .FEATURES Black and White in color INCLUDES One Forward Only Shaft and Gear REQUIREMENTS Installation onto a T-Maxx

135,-

KJØP
This ESC is especially designed for use with the TBLM series of Tamiya Brushless Motors (Sensored-Type, 10.5T, 12.5T, 14.5T, 16.5T). Brake and neutral brake settings can be adjusted independently, and it features 3 protection systems against overheating, overloading and low voltage. It is also compatible with brushed motors (Normal Type 540 and Sports-Tuned Motors 25 Turn or higher). Note: When using servos with a current exceeding 1.5A, BEC output may be shut down.

799,-

KJØP
Charge Lead Tamiya with 4mm banana plugs

69,-

KJØP
Kvalitets NiMh pakke med meget høye utladings egenskaper! Rimelig pakke som leverer! Kapasitet på 3300 mAh Spenning er 7.2V TAMIYA CONNECTOR Lengde: 135mm Høyde:    24mm Bredde:   46mm

299,-

329,-

KJØP
-9%
SkyRC E680 er en computerlader som dekker de fleste ladebehov, den har en makseffekt på 80W og maks ladestyrke er 8.0A. Laderen har også innebygget balanserer og det følger med ladekontakt med XT60-plugg.  SkyRC E680 er en god multilader som kan lade LiPo, LiHV, LiFe, LiIon, NiHm, NiCd, AGM og Pb batterier. Laderen kan bruke både 12V og 220V kilde inn, så denne laderen vil kunne brukes både i felten på ett bilbatteri og på hobbyrommet plugget rett i veggen. Laderen har max ladestyrke på 80W/8A, så ett 2cell LiPo kan da lades på 8A, 3cell LiPo kan da lades på ca 7A. Ett 6cell LiPo på ca 3,6A. Det følger med 220V strømkabel, kabel med krokodilleklemmer for tilkobling til eksempelvis 12V bilbatteri, XT60-ladeledning og 2-6S XH-balanseringsbrett.(SK-600020-04) Spesifikasjoner: Vekt 390gram Innspenning DC 11-18V Innspenning AS 100-240V Display LCD Størrelse 135x110x60mm Backlight Ja Antall celler LiPo 1-6S Antall celler NiMh/NiCD 1-15 PB 2-20V Ladestyrke 0.1-8,0A Maks Ladeeffekt 80W Utladeeffekt max 10W Minne 10 modellminner Skal man lade batterier med andre typer strømkontakt, må tilbehør kjøpes. Skal man balansere LiPo med annen type balanseringskontakt, kjøp eksempelvis SkyRC Multi balanseringskontakt. Se under for tilbehør. Viktig info! Husk at ved lading av lipo batterier skal man for å oppnå full balansering av pakken kople til begge kontaktene fra batteriet og velge LiPo Balance programmet, ikke LiPo Charge.  SkyRC e680 Multi-Chemistry Charger/Discharger Specifications: AC Input: 100-240Volt AC DC Input: 11-18Volt DC Circuit Power: Max. Charge Power 80W Max. Discharge Power 10W Charge Current Range: 0.1-8A Discharge Current Range: 0.1-2A Current Drain For Balancing LiPo: 300mA/cell NiCd/NiMH Battery Cell Count: 1-15 cells LiPo/LiHV/LiFe/Lilon Cell Count: 1-6 cells Pb battery voltage: 2-20V Net Weight: 390 g Dimensions: 135 x 110 x 60 mm

699,-

749,-

KONTAKT
-7%
Screws, 3x12mm washerhead self-tapping (6)

25,-

KJØP
FLYSKY GT2B features 3 channel operation, interchangeable hand grips, adjustable steering dual-rate, servo reversing and a rechargeable li-ion battery which eliminates the need for buying expensive AA batteries. The li-ion battery also makes this transmitter much lighter, which gives the user a great feel during use. No more lugging around a heavy transmitter holding 8 x AA batteries! Features: • Reliable, interference free 2.4GHz AFHDS signal operation • 3CH operation • Rechargeable li-ion transmitter battery • Interchangeable rubber hand grips • Adjustable steering dual-rate • Servo reversing Transmitter Specs: Model: Car/Boat RF Power: 20dBm (100mW) max Modulation: GFSK System Type: AFHDS Sensitivity: 1024 Low Voltage Warning: Yes Charge Port: Yes (USB- charge cable included) Power: 3.7V 800mAh li-ion (included) Weight: 270g Receiver Specs: Model: Car/Boat RF Receiver Sensitivity: -105dBm Modulation: GFSK System Type: AFHDS Sensitivity: 1024 Failsafe: Yes Power Port: Yes (VCC) Power: 4.5~6.5 VDC Weight: 5g Antenna Length: 26mm Dimensions: 37.6 x 22.3 x 13mm Includes: FS-GT2B transmitter FS-GT2B 3CH receiver 3.7V li-ion rechargeable battery pack Optional second rubber hand grip Antenna tube USB charge cable Bind plug User manual

579,-

699,-

KJØP
-17%
Savox SC-0254MGPLUS - Standard Sized Digital Servo with Soft Start 0.14sec 7.2kg/cm @ 6V The Savox SC-0254MG Plus is a high torque, metal-geared, digital, standard servo. A great replacement for standard, plastic-geared servos with less torque. Features: Soft Start Sanwa SSR compatible Metal gear train ensures durability under harsh situations Higher torque output than standard servos Ideal for 30-60 size aircraft, and some car applications Leading edge digital servo technology Strong 3-Pole Brushed motor Accurate and fast response Fine resolution Composite case Ball bearings Specifications: Torque @ 4.8v: 6.9kg/cm Torque @ 6v: 7.2kg/cm Speed @ 4.8v: 0.19s/60deg Speed @ 6v: 0.14s/60deg Dimensions: L40.7 x W20 x H39.4mm Weight: 49g Operating Temperature: -10° to 50°C Running Current (no load): 220mA @4.8V, 240mA @6.0V Stall Current (at locked): 1300mA @4.8V, 1500mA @6.0V Idle Current: 6mA @4.8V, 6mA @6.0V Wire Length: 300 +/- 5mm Output Gear Spline: 25 Tooth Bearings: 2BB Operating Travel: 120° (1000 → 2000 µ second) Neutral Position: 1500 µ second Pulse Width Range: 800 → 2200 µ second Maximum Travel: Appx 164° (800 → 2200 µ second) Refresh Rate: 240 Hz Motor Type: Brushed

389,-

419,-

KJØP
-7%
These are the 3x30mm Cap Head Screws for use on the          Traxxas Slash 2WD Short Course Racing Truck RTR. FEATURES: Steel construction           Black in color INCLUDES: Six 3x30mm Cap Head Screws REQUIRES: Installation on the vehicle SPECS:    Length: 3mm           Diameter: 30mm

39,-

49,-

KJØP
-20%
 This is the Tamiya 1/10 Scale "M" Chassis Slick Tires. FEATURES:   Full slick rubber tires.             Great for on-road use. INCLUDES:  2  tires SPECIFICATIONS:    wide-              24mm (31/32")                    outside diameter-  55mm (2 3/16")                    inside diameter-where tire mounts to wheel-38mm (1 1/2") REQUIRES:  CA glue to wheels. COMMENTS:  Fits "M" chassis kits such as the Tamiya Mini Cooper.

99,-

KJØP
The Tamiya RS-540 sport tuned motor is an economical high performance motor for on- and off-road vehicles.  It will work in many Tamiya vehicles (check instruction manual for applicability). Features: 6-8.4V (5-7 cells) usable voltage range           18,300 rpm at best efficiency           350 g-cm torque at 18,300 rpm           peak rpm: 21,000           peak current draw 50+ amps           1/8" motor shaft           2" motor leads with bullet connectors already installed Motor : 23 turn Includes: (1) motor Requires: Nothing else required

309,-

329,-

KJØP
-6%
       This is a package of six 3x10mm Traxxas Cap Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x10mm cap head screw is required INCLUDES: Six 3x15mm Traxxas Cap Head Screws REQUIRES: 2.5mm hex head wrench SPECS:    Length:  15mm           Diameter: 3mm

35,-

KJØP
This is a package of six 3x6mm Traxxas Button Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x6mm button head screw is required INCLUDES: Six 3x6mm Traxxas Button Head Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:   6mm           Diameter: 3mm

35,-

KJØP
This is the stock replacement REAR shock tower for the Traxxas Stampede/Rustler and Bandit FEATURES:    Made from black molded nylon    For the Traxxas Stampede SPECS:    Width at top: 4 5/16"    Width at bottom: 2 1/4"    Thickness: 1/4"    Height: 2 13/16" INCLUDES:    (1) Rear shock tower for the Traxxas Stampede

59,-

KJØP
Denne er erstattet med TRX 3185X Motor screws (3x8mm washerhead machine) (6)

Screws, 3x15mm washerhead machine (6)

25,-

KJØP
Threaded rods (20/25/44mm 1 ea.)/ (1) 12mm set screw

39,-

49,-

KJØP
-20%
These are 3x12mm Washerhead Machined Screws from Traxxas FEATURES Steel construction Phillips drive insert Flanged pan head Replacement parts designed for the Traxxas Nitro Hawk INCLUDES(6) Screws SPECIFICATIONS Diameter: 3mm Length: 12mm

25,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png