Biler

Tamiya 58618 1/10 Monster Beetle 2015 Kit - Inkl ESC

Art.nr: 58618

Copied

This is the Electric Powered, Radio Controlled 2015 Monster Beetle Kit from Tamiya. FEATURES Chassis: Plastic Drive: Rear wheel, dog bone type driveline Motor: 540 size brushed ESC: Hobbywing speedcontroller Body: Molded polystyrene with detailed driver figure, smoked windshield and side windows Suspension: Front, double wishbone, rear trailing arm Shocks: ABS plastic, oil-filled Steering Mechanism: Direct servo Tires: Lug and pin spike treaded rubber, 5.1" (130mm) diameter Wheels: One-piece plastic with gold finish Bumper: Plastic, front and rear Differential: Gear type Camber Tie Rods: Fixed non-adjustable Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis INCLUDES 2015 Monster Beetle Kit with Shocks, Motor,esc, Body, Tires, Wheels 10 tooth Pinion Gear and Instruction Manual REQUIREMENTS Radio: 2-channel w/high torque steering servo Battery: 6-cell stick w/Standard connector Battery Charger: To match selected battery Track and maintenance equipment ESC is also required. SPECIFICATIONS Vehicle- Length: 16.1" (410mm) Width: 11.4" (290mm) Height: 9.4" (240mm) Body- Length: 13.5" (342mm) Width: 7.5" (190mm) at fenders Height: 4.6" (118mm)

2.695,-

2.995,-

KJØP

-10%

Tamiya 58620 1/10 Toyota FJ Cruiser Black CC-O1 4WD ...

Art.nr: 58620

Copied

This is the 1/10 scale electric powered, radio controlled, 4WD Black Special Toyota FJ Cruiser Off-Road Kit from Tamiya. FEATURES Chassis: CC-01, ladder frame bathtub type Drive: Four wheel drive, shaft driven Motor: 540 electric motor Shocks: Oil-filled, CVA Gearbox: Front and rear sealed gearbox Differentials: Bevel gear, lockable rear diff for better off-road performance Transmission: Single speed Body: Trimmed polycarbonate, painted black, separate black metal plated door mirrors, lamps, spare tire cover and front grille, smoke colored windows LED Lights: Tires: Semi-pneumatic all-terrain, rubber construction 1.3" (33mm) wide, 3.7" (94mm) diameter Wheels: Six spoke plastic, 2-piece 1" (26mm) wide, 1.9" (48mm) diameter Bumper: Front, plastic construction, black in color Suspension: Front, long stroke double wishbone Rear, four link rigid Camber Tie Rods: Fixed non-adjustable Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Steering: Bell-crank type with servo saver and adjustable linkage INCLUDES Tamiya Toyota FJ Cruiser with oil-filled shocks, 540 motor, ESC, clear body, tires, wheels, LED light bucket kit (see COMMENTS) shock oil, 16 tooth pinion gear, spur gear, instructions REQUIREMENTS Radio: 2-Channel with 1 Servo Electronic Speed Control: Eight AA batteries for transmitter Battery: 6-cell stick pack w/ standard connector Charger: AC/DC timed or peak for 6-cell battery Misc. Items: Building and track equipment SPECIFICATIONS VEHICLE- Length: 18.7" (474mm) Width: 7.9" (200mm) Height: 7.4" (188mm) Weight: 53.3oz (1510g) Wheelbase: 10.5" (267mm) Gear Ratio: 1:14.67 COMMENTS The TLU-02 Light Control Unit (not included) can be installed for more light effects

3.195,-

3.495,-

KJØP

-9%

Tamiya 58621 1/10 Suzuki Jimny JB23 Blue MF-01X 4WD ...

Art.nr: 58621

Copied

Pre-painted perfection! This Jimny comes pre-painted in Metallic Blue so you can concentrate on building the best ride possible and leave decoration to the factory! The compact MF-01 X chassis is adjustable with three wheelbase options. 4WD makes this cool-blue vehicle an exceptional on road or dirt track racer. Get yours and see where the drive takes you. 1/10 Scale kit with pre-painted body 4-Wheel gearbox drive train Geared differential Fully independent double wishbone suspension Direct servo steering Friction damper shocks This is the Radio Controlled, Electric Powered, Suzuki Jimny JB23 Off Road Vehicle Kit from Tamiya. FEATURES Chassis: Three-piece resin monocoque, compatible with existing M-chassis bodies, adjustable wheelbase Drive: Four wheel, gear driven rear wheels, dogbone with driveshaft driven front wheels Motor: Brush equipped Mabuchi RS-540 Torque Tuned Electronic Speed control: TBLE-02S with Tamiya type connector Suspension: Four wheel independent double wishbone Differentials: Gear type Tires: Rally block 1.06" (27mm) wide, 2.7" (69mm) diameter Wheels: 1.02" (26mm) wide, 1.9" (48mm) diameter, 5-spoke, gun-metal gray in color Body: Molded polycarbonate, trimmed and painted in Tamiya (PS-59) Dark Metallic Blue Shocks: Friction, plastic body Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Non-adjustable Steering: Bellcrank type INCLUDES Suzuki Jimny JB23 Off Road Vehicle Kit with Brushed Motor, TBLE-02S ESC, Tires, Wheels, Shocks, Painted Body, Decals, Instruction Manual, 16T Pinion Gear REQUIREMENTS Radio: 2-channel with high torque steering servo Battery: 6-cell NiMH with Standard connector Battery Charger: To match selected battery Tools, track equipment SPECIFICATIONS Wheelbase: 8.8" (225mm) adjustable Body- Length: 13.6" (346mm) Width: 6" (152mm) Height: 5.2" (132mm)

2.595,-

2.795,-

KJØP

-7%

Tamiya 58624 Mazda Roadster MX-5 M05

Art.nr: 58624

Copied

This is the radio controlled, electric powered, 1/10 scale Mazda MX-5 On-Road Car Kit from Tamiya. FEATURES Chassis: M5 resin monocoque design, composite construction with extensions to build a short, medium or long wheelbase chassis Drive: Front wheel Shocks: Plastic body friction type Shock Towers: Composite construction Motor: 540 size Electronic Speed Control: Tamiya TBLE-02S Gearbox: Sealed, integral with chassis Transmission: Single speed, ball bearing equipped Differential: Three bevel gear Body: Polycarbonate, clear untrimmed Suspension: Four wheel independent double wishbone Tires: Treaded 60D radial 0.98" (25mm) wide, 2.3" (59mm) diameter with foam inserts Wheels: Plastic, black in color 0.94" (24mm) wide, 1.5" (38mm) diameter Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Steering: Three piece tie-rod linkage INCLUDES M-05 chassis, tires, wheels, foam inserts, Mazda body, decals, 20 tooth pinion gear, shocks, ESC, motor and instruction manual REQUIREMENTS Radio: 2-channel AA Batteries: 8 for transmitter Battery: 6-cell stick with standard connector Battery Charger: Peak type recommended Building and track equipment SPECIFICATIONS Vehicle; Length: 14.4" (365mm) Width: 6.7" (170mm) Height: 5.6" (142mm) Wheelbases: 8.8" (225mm) Tread: 5.4" (138mm) center of wheels, side-to-side

2.195,-

KJØP

Tamiya 58624 Mazda Roadster MX-5 M05 no ESC

Art.nr: 58624-60A

Copied

This is the radio controlled, electric powered, 1/10 scale Mazda MX-5 On-Road Car Kit from Tamiya. FEATURES Chassis: M5 resin monocoque design, composite construction with extensions to build a short, medium or long wheelbase chassis Drive: Front wheel Shocks: Plastic body friction type Shock Towers: Composite construction Motor: 540 size Electronic Speed Control: Not incl. Gearbox: Sealed, integral with chassis Transmission: Single speed, ball bearing equipped Differential: Three bevel gear Body: Polycarbonate, clear untrimmed Suspension: Four wheel independent double wishbone Tires: Treaded 60D radial 0.98" (25mm) wide, 2.3" (59mm) diameter with foam inserts Wheels: Plastic, black in color 0.94" (24mm) wide, 1.5" (38mm) diameter Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Steering: Three piece tie-rod linkage INCLUDES M-05 chassis, tires, wheels, foam inserts, Mazda body, decals, 20 tooth pinion gear, shocks, ESC, motor and instruction manual REQUIREMENTS Radio: 2-channel and ESC AA Batteries: 8 for transmitter Battery: 6-cell stick with standard connector Battery Charger: Peak type recommended Building and track equipment SPECIFICATIONS Vehicle; Length: 14.4" (365mm) Width: 6.7" (170mm) Height: 5.6" (142mm) Wheelbases: 8.8" (225mm) Tread: 5.4" (138mm) center of wheels, side-to-side

Tamiya 58625 1/10 RC Motul Autech GT-R

Art.nr: 58625

Copied

Tamiya 58625 1/10 RC Motul Autech GT-R This R/C model assembly kit recreates the gun metal and red liveried Motul Autech GT-R that completed a magnificent brace of back-to-back championships with victory in the GT500 class of Super GT in 2015. The model has a highly realistic polycarbonate body and separate parts recreating the door mirrors and rear wing, as well as wing aerodynamic parts. Marking stickers are included to recreate the numerous sponsors and the red sections of the livery. The model is based upon the accessible and adaptable TT-02 chassis. TT-02 Chassis: The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Black 6-spoke wheels are paired with slick tires for a racy finish. Specifications ●Length: 472mm, Width: 188mm, Height: 124mm ●Wheelbase: 257mm　●Tire Width/Diameter: 27/67mm (Front & Rear) ●Bathtub-type Frame ●Shaft-Driven 4WD ●Front/Rear 4-Bevel Resin Differentials ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front/Rear Friction Dampers ●Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ●Type 540 Motor ●Electronic Speed Controller (ESC) included. Required To Complete: 2-Channel radio steering servo 7.2 battery charger Tamiya PS paint SPECIFICATIONS Adjustable Gear Ratio Yes Bearings Plastic Bushing Body Material Polycarbonate Body Stickers Included Chassis Material ABS Plastic Chassis Type TT-02 Construction Type Assembly Kit Differential Type Gear Drive Type 4WD Electronic Speed Control (esc) TBLE-02 Capable of brushless & brushed motors (23T max-Brushed, 21.5 max brushless) Motor 540-brushed type Scale 1/10 Shock Damper Friction Type Suspension 4-wheel fully independent double wishbone Terrain Use On-Road

1.695,-

1.895,-

KJØP

-11%

TAMIYA 58626 RC RAIKIRI GT (TT-02) inkl esc

Art.nr: 58626

Copied

TAMIYA RC RAIKIRI GT The stylish Raikiri shell is the brainchild of Japanese designer Kota Nezu of znug design, who has contributed to a number of popular Tamiya products. The wide and lowdown form of the Raikiri GT has been adapted for use on electric R/C cars, and is bound to turn heads at the local racetrack, equipped as it is with a stylish wing at the rear. Markings are also included to decorate the body. TT-02: Adaptable, balanced shaft driven 4WD The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gun metal color 12-spoke wheels are paired with slick tires for a racy finish. SPECIFICATIONS Adjustable Gear Ratio Yes Bearings Plastic bushing Body Material Polycarbonate Body Stickers Included Chassis Material Plastic Chassis Type TT-02 Construction Type Assembly kit Differential Type Gear Drive Type 4WD Electronic Speed Control (esc) Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit) Led Light Buckets No Motor 540-brushed type Required To Complete 2-channel radio, steering servo, 7.2-7.4volt battery & battery charger, and Tamiya PS paint. Scale 1/10 Shock Damper Friction damper Special Feature 1 Length: 432mm, width: 188mm, height: 114mm Special Feature 2 The TT-02 is a highly versatile and easy-to-maintain shaft-driven 4WD chassis, with easily adjustable wheelbase, tread and ground clearance settings. Special Feature 3 Includes parts from Racing Wing Set (Item 54457) Special Feature 4 Gun metal color 12-spoke wheels are paired with racing slick tires. Special Feature 5 Features newly designed body marking stickers, and masking stickers for use when painting. Special Feature 6 A wide range of option parts is available to tune and customize TT-02 chassis cars. Special Feature 7 TBLE-02S ESC included (May be used for brushed and brushless motor applications) Special Feature 8 Tamiya Torque Tuned brushed motor included. Suspension Fully independent double wishbone Terrain Use On-Road

1.595,-

1.895,-

KJØP

-16%

Tamiya 58629 RC Mercedes-Benz G 320 Cabrio MF-01X ...

Art.nr: 58629

Copied

The Mercedes Benz G320 Cabrio was a G Class series vehicle that was sold between 1997 and 2001. While many G Series cars were produced, this version featured a soft convertible top and was based on a short wheelbase version of the chassis. The Tamiya radio control replica is featured on the 4WD MF-01X chassis. About the MF-01X: Power is transmitted from the rear mounted motor to the front wheels via a propeller shaft that runs down the side of the MF- 01X. Gearboxes are integrated into the monocoque for a sturdy and easy-to-assemble structure. The MF-01X has a three-section make-up; changing the central spacer section enables short (210mm), middle (225mm), and long (239mm) wheelbases. The Mercedes-Benz G 320 uses the long wheelbase configuration. Type Detail Scale 1/10 Construction type Assembly kit Terrain use On-Road Drive-train 4WD Drive type Gearbox Drive line Dog bone Differential type Gear Suspension Fully independent double wishbone Steering mechanism Direct servo Shock damper Friction damper Shock damper material Plastic Tire type Rubber Tire tread Radial Body material Polycarbonate Chassis material Plastic Electronic Speed Control (ESC) Included ESC model TBLE-02S LED Light buckets No LED lights No Motor 540-brushed type Bearings Plastic bushing Adjustable camber Fixed Adjustable toe angles Front only Adjustable ground clearance Yes Adjustable gear ratio Yes Adjustable wheelbase Yes Adjustable track width Fixed Adjustable shock angle Fixed Special feature 1 Length: 385mm, width: 178mm, height: 175mm Special feature 2 The G 320 Cabrio body is expertly captured in lightweight, durable polycarbonate Special feature 3 Side mirrors are recreated using separately molded plastic parts Special feature 4 The 4WD MF-01X chassis has a rear mounted motor, and uses a prop shaft to transmit power to the front wheels. It features a robust, easy to maintain monocoque frame. It is at home on road and flat dirt surfaces Special feature 5 This model uses the L wheelbase (239mm). The chassis can be set up in S (210mm) and M (225mm) wheelbases using separately-sold propeller shafts Special feature 6 A range of option parts are available to hop up the MF-01X chassis, including lightweight, rigid aluminum propeller shafts Special feature 7 Includes a Tamiya TBLE-02S ESC and Torque Tuned motor. ESC features brushless motor mode for easy expandability Requires A 2-channel radio gear Requires B 7.2 battery & charger Requires C Polycarbonate paint

Tamiya 58630 1/10 Plasma Edge II TT-02B 4WD Buggy Kit ...

Art.nr: 58630

Copied

This is the Radio Controlled, Electric Powered, 1/10 scale, TT-02B Plasma Edge II Buggy Kit. FEATURES Chassis: Plastic, TT-02B-uses TT-02 bathtub type plastic chassis as a base and adds longer suspension arms, CVA shocks, and buggy bumpers Drive: Four wheel shaft drive with plastic dogbones Motor: 540 RS brushed, Torque Tuned ESC: Included hobbywing Differential: Four pinion resin gear type Suspension: Fully independent double wishbone Shocks: Oil filled plastic body, CVA Tires: Rubber pin spike 3.2" (82mm) outer diameter Wheels: 5-spoke yellow plastic 2.04" (52mm) diameter, front width 1.1" (29mm), rear width 1.4" (35mm) with black chrome finish Steering: Bellcrank type Bumper: Front plastic Body: Clear polycarbonate untrimmed Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable, front only caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis INCLUDES TT-02B Buggy Chassis with Brushed Motor, clear Body,Tires, Wheels, Decals, and Instruction Manua lREQUIREMENTS Radio: 2-channel with steering servo. Battery: 7.2V stick pack with standard connector Battery Charger: For selected battery pack Polycarbonate safe spray or brush-on paint Track and maintenance equipment SPECIFICATIONS Vehicle; Length: 15" (380mm) Wheelbase: 10.5" (266mm) Body;Length: 11.25" (286mm) Width: 5.7" (144mm) Height: 3" (76mm)

1.795,-

2.195,-

KJØP

-18%

Tamiya 58631 RC Subaru Impreza TT-02 Monte-Carlo '99 ...

Art.nr: 58631

Copied

The TT-02 chassis line-up is Tamiya's entry level 4WD platform. It allows new kit builders an easy gateway into the world of on-road running due to its easy construction, balanced performance and high aftermarket Hop-Up Option support. This TT-02 kit features the Subaru Impreza rally car that took part in the Monte Carlo Rally of the 1999 World Rally Championship (WRC) season. The Impreza was a legendary force in the WRC from the 1990s and into the next millennium, with 3 manufacturers' championships in a row from 1995-1997. In 1999 they were still competitive with an impressive 1-2 finish for drivers Kankkunen and Burns in Argentina (round 7). The TT-02 chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well, as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance. Description: This is Tamiya 1/10 TT02 Subaru Impreza Monte Carlo 99 4WD Touring Car Kit EP w/ Motor. The 1999 version of the two-door Subaru Impreza rally car was a highly balanced beast, with 4-cylinder turbocharged all-aluminum boxer engine, a drive-by-wire throttle and semi-automatic 6-speed transmission. This R/C model assembly kit recreates the Impreza from the year's opening rally in Monte-Carlo, with the form faithfully depicted in durable polycarbonate, and separate parts used to recreate rear wing and side mirrors. Stickers are included to recreate the multitude of team and sponsor logos. The model runs on the adaptable TT-02 chassis, which is equally at home on road and flat dirt surfaces. The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gold color fin-spoke wheels are paired with rally block tires. Specification: Adjustable Gear Ratio: Yes Bearings: Plastic bushing Body Material: Polycarbonate Body Stickers: Included Chassis Material: ABS Plastic Chassis Type: TT-02 Construction Type: Assembly Kit Differential Type: Gear Drive Type: 4WD Motor: 540-brushed type Scale: 1/10 Shock Damper: Friction type Suspension: Fully independent double wishbone Terrain Use: Multi-Purpose Include: Tamiya 1/10 TT02 Subaru Impreza Monte Carlo 99 4WD Touring Car Kit EP w/ Motor (1 set) Required: 2-channel radio & Receiver Steering servo ESC 7.2-7.4volt battery pack Compatible charger Tamiya PS paint Tool

1.495,-

1.595,-

KJØP

-6%

Tamiya 58635 Mercedes-Benz G 320 Cabrio MF-01X 4WD Kit ...

Art.nr: 58635

Copied

The Mercedes Benz G320 Cabrio was a G Class series vehicle that was sold between 1997 and 2001. While many G Series cars were produced, this version featured a soft convertible top and was based on a short wheelbase version of the chassis. The Tamiya radio control replica is featured on the 4WD MF-01X chassis with a pre-painted body that just needs the stickers applied and accessories attached. Skip the Painting, Enjoy the Assembly!The Mercedes-Benz G-Class’ outstanding durability and off-road performance have made it a firm favorite with consumers since its inception in 1979, its polished technology taken over and modernized with each generation to make it a top class SUV. This is an R/C model assembly kit of the G 320, a 2-door cabriolet produced between 1997 and 2001, and much sought-after thanks to its stylish looks and typically uncompromising G-Class performance. The body is reproduced in tough, lightweight polycarbonate, which is pre-painted in silver and features the soft top pre-painted in flat black. The kit features separately molded side mirrors and metal plated grille-parts. The exciting shaft-driven 4WD MF-01X chassis requires assembly, and is paired with 7-spoke wheels and semi-pneumatic treaded tires for super performance whether on- or off-road. MF-01X – Compact 4WD At Home on a Range of SurfacesBased around a tough monocoque frame with integrated gearboxes, this compact 4WD chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis center secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. Off-road capable M-05Ra chassis uprights and hub carriers are also included. Specifications ★Length: 385mm, Width: 177mm, Height: 180mm ★Wheelbase: 239mm (L) ★Tire Width/Diameter (Front & Rear): 30/77mm ★Tread (Front & Rear): 145mm ★Monocoque Frame ★Shaft-Driven 4WD ★3-Bevel Differential Gears ★2-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★Front & Rear Friction Dampers ★Gear Ratio = 9.5:1 ★Type 540 Motor ★Electronic Speed Controller (sold separately) REQUIREMENTS Radio: 2-channel with high torque steering servo and esc. Battery: 6-cell NiMH with Tamiya connector Battery Charger: To match selected battery Tools, track equipment

2.795,-

2.995,-

KJØP

-7%

Tamiya 58639 MERCEDES AMG GT3 1/10 RC (TT-02) NO ESC

Art.nr: 58639

Copied

Tamiya 58639 MERCEDES AMG GT3 1/10 RC (TT-02) Tamiya continue to expand our range of kits on the entry level TT-02 with this stunning new release. It depicts the fabulous body of the Mercedes-AMG GT3 car, which was created for the GT3 class of racing from 2016 onwards. The 6.3-liter V8 powered car has quickly become a modern legend with race results like a clean sweep of the top 4 in a 2016 Nürburgring 24-hour race. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 453mm. • The luxurious, powerful form of the Mercedes-AMG GT3 is recreated in polycarbonate. • Separately molded parts are included in the kit to recreate side mirrors and the distinctive rear wing. • PS-63 Bright Gun Metal (Item 86063) is a new Tamiya Color spray for polycarbonate, formulated especially for this model. It recreates the standard works color (requires a coat of PS-55 Flat Clear on outside of body). • The beginner-friendly yet highly adaptable TT-02 is a versatile and easy-to-maintain chassis. • Comes with the 12-spoke wheels used in Item 58619. • Stickers are included to recreate the markings of the car, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car. • Please note that R/C equipment and battery pack are separately required. CHASSIS TT-02 SKALA 1:10 DRIFT 4WD LEVERES SOM KIT MERKE TAMIYA DRIVKRAFT ELEKTRO

1.395,-

1.595,-

KJØP

-13%

Tamiya 58640 Mazda 2 (M-05) no ESC

Art.nr: 58640

Copied

This R/C assembly kit model recreates the 4th generation model of Mazda’s worldwide hit car, known as the Mazda2 around the world and the Demio in Japan. This compact car has a body incorporating design themes from Mazda’s “Soul of Motion (Kodo)” concept, such as the front section with its striking headlights stylized like the eyes of wild animals, linked by the “signature wing” skirting the front grille. It won the 2014-2015 Car of the Year Japan award for Mazda. The Tamiya R/C model faithfully captures the fun and maneuverability of the real life subject as it comes on the proven M-05 L-chassis platform. The M-05 is a simple to build FWD (front wheel drive) machine, which allows for plenty of after-market parts to be outfitted as you grow with your skill. The lightweight, narrow semi-monocoque frame offers an optimized weight distribution and a low center of gravity. A ground-hugging 4-wheel independent double wishbone suspension and a 3-piece steering linkage ensure excellent stability during high-speed cornering. Three wheelbase lengths (210mm, 225mm, 239mm) are possible by simply switching the position of the rear suspension parts, enabling a wide range of body choices available from Tamiya An Elegant Compact Car This is an R/C model assembly kit of the 4th-generation Mazda2 (marketed as the Demio in Japan), which was named the 2014-2015 Car of the Year Japan among numerous other awards. The model uses a lightweight and durable polycarbonate body to capture the elegant Mazda2 form, which incorporates design themes from Mazda’s “Soul of Motion (Kodo)” concept. Side mirrors are molded as separate parts, while stickers are included to recreate details such are lights, optional body-side graphics and more. M-05: Low Center of Gravity, High Performance! The front wheel drive M-05 chassis features a lightweight, narrow, durable, and　easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provide stable high-speed cornering. Silver color 5-spoke wheels are matched with tread-patterned radial tires and feature tire inserts. ★The body elegantly captures the Mazda2 form which embodies the Mazda ‘kodo’: soul of motion design concept. ★The timeless M-05 chassis design is centered around a lightweight, slimline semi-monocoque for great durability. ★3-piece steering tie-rod setup ensures that the model provides crisp, true handling, making it a fun drive. ★Ground-hugging 4-wheel double wishbone suspension and M-Chassis 60D radial tires give a smooth ride. ★A transponder stay is included in the kit for users who would like to test their skills in R/C races. ★A comprehensive sticker sheet recreates markings like Mazda logos. Window masking stickers included. Specifications ●Length: 377mm, Width: 167mm, Height: 136mm ●Wheelbase: 239mm　●Tread (Front & Rear): 138mm ●Tire Width/Diameter (Front & Rear): 25/59mm ●Monocoque Frame ●3-Bevel Differential Gear ●Front-Wheel 2WD ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front & Rear Friction Dampers ●Gear Ratio = 5.8:1 ●Type 540 Motor ●Requires an Electronic Speed Controller (sold separately)

1.595,-

1.695,-

KJØP

-6%

Tamiya 58645 1/10 Subaru WRX STI 24 Hour Nurburgring ...

Art.nr: 58645

Copied

Sleek rally realism! The 1/10, electric Subaru WRX STI On-Road 4WD Kit recreates the Nurburgring-winning racer that dominated the legendary German circuit in 2016! A TT-02 ABS resin bathtub chassis provides a fantastic foundation, while the Torque-Tuned 540 motor, real rubber slicks and 10-spoke wheels provide the perfect mix of performance and precision needed for small-scale rally racing. TT-02 ABS resin bathtub chassis minimizes contact with the road. The upright assembly can be modified to give the chassis an extra 4 mm of clearance for rally racing. Four-wheel shaft drive with dogbones. Torque-Tuned 540 motor. NO ESC. Clear polycarbonate body with separately molded side mirrors and rear wing. Plastic frictions shocks. Bellcrank steering. Fully independent double wishbone suspension. Urethane front bumper. Gear differentials. Treaded rubber tires with foam inserts. 1.02" (26 mm) wide, 2" (51 mm) diameter gunmetal gray 10-spoke wheels with 12 mm hex. Non-adjustable camber. Adjustable toe-in. This is the 1/10 scale, Tamiya electric powered, radio controlled, Subaru WRX STI On-Road Race Car Kit. FEATURES Chassis: TT-02 ABS resin bathtub type minimizes contact with the road upright assembly can be changed to give chassis an extra 4mm of travel for Rally racing Drive: Four wheel, shaft driven, with dogbones Motor: Tamiya Torque Tuned 540 brush equipped Electronic Speed Control: Not incl. Differential: Gear type Wheels: Nylon construction, 10 spoke 12mm hex, 1.02" (26mm) wide 2.00" (51mm) diameter, gun metal gray in color Tires: Treaded rubber with foam inserts Suspension: Fully independent double wishbone Shocks: Plastic body, friction, not oil filled Body: Clear polycarbonate with plastic side mirrors and rear wing Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Steering: Bellcrank type Bumper: Front, urethane INCLUDES Tamiya Subaru WRX STI with 540 Brushed Motor, 22T Pinion Gear, Tires, Wheels, Clear Body, Foam Inserts, ESC, Decals and Instructions REQUIREMENTS Radio: 2-channel with high speed steering servo and esc. Battery: 7.2V NiMH Battery Charger: To match selected battery Building and track equipment SPECIFICATIONS Vehicle- Wheelbase: 17.4" (441mm) Length: 18.6" (472mm) Body- Length: 17.9" (455mm) Width: 7.5" (190mm) Height: 4.5" (114mm)

1.395,-

1.595,-

KJØP

-13%

Tamiya 58646 1/18 Konghead 6x6 G6-01 Monster Truck Kit

Art.nr: 58646

Copied

Primed to pound pavement – and all other types of terrain! The 1/18 Konghead 6x6 G6-01 Kit comes with a game-changing 6WD chassis that makes it a superstar at extreme off-roading! A powerful gear-driven setup makes the Konghead able to conquer slope inclines of up to 40°. The clear polycarbonate body is inspired by the best-selling Bullhead, while a vast assortment of metal-plated parts add dynamic detail to a dynamite model! GF-01 plastic monocoque chassis is compatible with many hop-up and spare parts. Six-wheel drive. Front-center mounted motor. Clear polycarbonate body is inspired by the popular Bullhead monster truck. Features metal-plated air cleaners, exhausts and more. Friction shocks. Standard build is front wheel steering. 4WS can be used with a 4WS-compatible transmitter and RC equipment (sold separately). Six-wheel double wishbone suspension. Tires, wheels and decals included. This is the Tamiya 1/18 scale Radio Controlled, Electric Powered Konghead 6x6 Off-Road Semi Truck Kit. FEATURES Chassis: GF-01 plastic monocoque, compatible with many GF-01 chassis Hop Up Option and spare parts Drive: Six wheel Motor: 540 brush equipped, front-center mounted Body: Clear polycarbonate, inspired by Tamiya's Bullhead monster truck, metal plated air cleaners, exhaust and more Suspension: Six wheel double wishbone Shocks: Friction, not oil-filled Steering: Standard build is front wheel steering, may be with four wheel steering, separately sold 4WS function transmitter and RC equipment required INCLUDES 1/18 scale Konghead 6x6 Off-Road Semi Truck Kit, Clear Body, Decals, Tires, Wheels Instruction Manual REQUIREMENTS Radio: 2-channel with high-torque steering servo ESC: Tamiya TEU-302BK recommended Battery: 7.2V 6-cell stick pack with Standard connector Battery Charger: Compatible with selected battery Polycarbonate safe spray or brush-on paint Building and track equipment SPECIFICATIONS Length: 16.5" (420mm) Width: 10.6" (270mm) Height: 11" (280mm)

2.495,-

2.895,-

KJØP

-14%

Tamiya 58647 1/10 M-07 Concept Chassis Kit

Art.nr: 58647

Copied

Versatile. Customizable. Incredible. The 1/10, 2WD electric M-07 Concept Chassis Kit combines superior response and easy maintenance to create the ultimate high-performance race car! Highlights include a rigid monocoque frame chassis, a silky-smooth drivetrain, a choice of 225 mm or 239 mm wheelbases and a double wishbone suspension. Monocoque frame chassis with detachable lower section. 2WD with universal driveshafts. Oil-filled CVAs.Four-wheel double wishbone suspension with dedicated long arms for a variety of set-up options. High-torque servo saver. Gear differential can be removed from the underside with minimal disassembly. Foam front bumper. Full set of ball bearings. Adjustable rear toe angle. This is the Electric Powered, Radio Controlled 1/10 scale On-Road M-07 Concept Chassis Race Car kit from Tamiya. FEATURES Chassis: Monocoque frame type with detachable lower section Drive: Rear wheel with universal driveshafts Differential: Gear type, can be removed from underside with minimal disassembly Shocks: Oil-filled CVA (constant volume adjustable) Suspension: Four wheel double wishbone with dedicated long arms for a variety of setup options Front Bumper: Foam Ball Bearings: Full set included Servo Saver: High-torque Wheels: Black plastic, eight spoke 1.5" (38mm) diameter, 0.83"(21.2mm) wide Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis INCLUDES M-07 Concept Chassis Race Car kit with Shocks, Ball Bearings, Decals, 20T Pinion Gear, Shock Oil and Instruction Manual REQUIREMENTS Radio System: 2-channel with high-speed steering servo Motor: 540 size ESC: Compatible with selected motor Battery: 7.2V stick pack Battery Charger: Compatible with selected battery AA Batteries: Eight, four for transmitter, four for battery box Tires: 1/10 scale on-road with foam inserts Polycarbonate safe spray or brush-on paint Building and field equipment SPECIFICATIONS Wheelbase: Adjustable from 8.8" (225mm) to 9.4" (239mm)

2.395,-

2.695,-

Ikke på lager

-11%

Tamiya 58649 1/10 NSU TT Jagermeister M-05 FWD Kit no ...

Art.nr: 58649

Copied

TAMIYA RC NSU TT JAGERMEISTER This radio control model recreates the Jägermeister-sponsored edition of the NSU TT, a race-oriented variant of the Prinz, of which almost 2,500 examples were built in the late 1960s and early 1970s by NSU Motorenwerke AG. It was powered by a variety of inline-4 engines depending upon the spec. The faithfully recreated polycarbonate body shell sits atop Tamiya’s M-05 FWD chassis platform which is easy to assemble and provides nimble and responsive front wheel drive handling characteristics. The M-05 is a simple to build FWD (front wheel drive) machine, which allows for plenty of after-market parts to be outfitted as you grow with your skill. The lightweight, narrow semi-monocoque frame offers an optimized weight distribution and a low center of gravity. A ground-hugging 4-wheel independent double wishbone suspension and a 3-piece steering linkage ensure excellent stability during high-speed cornering. Three wheelbase lengths (210mm, 225mm, 239mm) are possible by simply switching the position of the rear suspension parts, enabling a wide range of body choices available from Tamiya. • 1/10 scale R/C model assembly kit. Length: 393mm. • The M-05 chassis is a compact unit based around a lightweight monocoque and offering great weight distribution with a low center of gravity. • This model uses the 239mm L wheelbase. • Gold color multi-spoke wheels. • Comes with marking stickers, plus masking stickers for use when painting the body. • Includes 540 motor Requires: 2-channel radio steering servo ESC 7.2volt battery & battery charger Tamiya PS paint. SPECIFICATIONS Adjustable Gear Ratio Yes Bearings Plastic bushing Body Material Polycarbonate Body Stickers Included Chassis Material ABS Plastic Chassis Type M-05 Construction Type Assembly Kit Differential Type Gear Drive Type 2WD Electronic Speed Control (esc): Not Included Led Light Buckets No Motor Brushed 540 Type Requires A 2-channel radio, steering servo, ESC, 7.2volt battery & battery charger, and Tamiya PS paint. Scale 1/10 Shock Damper Friction type Suspension 4-wheel fully independent double wishbone Terrain Use On-Road

1.495,-

1.595,-

KJØP

-6%

Tamiya 58650 1/10 Volkswagen Beetle Rally MF-01X 4WD ...

Art.nr: 58650

Copied

The Beetle to beat! This RC model assembly kit recreates the classic Volkswagen Beetle in rally racing form. Thanks to its superlative reliability and uncomplicated upkeep, it was a fixture on the global rally circuit from the 1950s through to the 1980s, and this model is inspired by such rallying Beetles. The VW body sits atop Tamiya's proven shaft-driven 4WD MF-01X chassis, which is at home on a range of surfaces from road to flat dirt. This is the Tamiya Radio Controlled, Electric Powered, Volkswagen Rally Off Road Vehicle Kit. FEATURES Chassis: MF-01X three-piece resin monocoque, compatible with existing M-chassis bodies, adjustable wheelbase Drive: Four wheel, gear driven rear wheels, dogbone with driveshaft driven front wheels Motor: Brush equipped Mabuchi RS-540 Torque Tuned Electronic Speed control: incl. Hobbywing 1080 Suspension: Four wheel independent double wishbone Differentials: Gear type Tires: Rally block 1.06" (27mm) wide, 2.7" (69mm) diameter Wheels: 1.02" (26mm) wide, 1.9" (48mm) diameter, gray in color Body: Trimmed and painted polycarbonate, separately molded side mirrors Shocks: Friction, plastic body Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Non-adjustable Steering: Bellcrank type INCLUDES Volkswagen Beetle Rally Off Road Vehicle Kit with Body, Tires, Wheels, 16T Pinion Gear and Manual REQUIREMENTS Radio: 2-channel with high torque steering servo and esc Battery: 6-cell NiMH with Standard connector Battery Charger: To match selected battery Tools, track equipment SPECIFICATIONS Wheelbase: 9.4" (239mm) adjustable Body- Length: Width: Height:

1.995,-

2.195,-

KJØP

-9%

Tamiya 58652 F104 PRO II W/BODY 1:10

Art.nr: 58652

Copied

Her får det det perfekte F-1 rc-bil byggesettet fra Tamiya. Her gjenskapes det strømlinjeformede F104-chassiset med et nytt nedre dekk, og oppgraderte deler, noe som gir en skarp og responsiv kjøring. Et helt nytt karosseri er også inkludert! Må kompletteres med: Radio og mottaker 4.8 ~ 7.4kg servo eller sterkere (25T) NiMH eller LiPO batteri (round case) ESC (fartskontroller) Motor Batterilader Anbefales: Kulelagre Tamiya har et bredt sortiment med maling. Anbefalte farger: PS-5 Black PS-4 Blue TS-14 Black X eller XF til hjelm, etter eget ønske. Om modellen • Dette er et 1/10 R/C-modellmonteringssett. Lengde: 440 mm, bredde: 180 mm, høyde: 88 mm, akselavstand: 270 mm. • Det lette F104-chassiset er utstyrt med forskjellige oppgraderte deler for å gjøre det om til F104 PRO II. • FRP-dobbeltdekks chassis har en ny design på nedre dekk, og en inline (langsgående) batteriposisjon. • Den 1,5 mm tykke FRP T-stangen med U-formet utskjæring er arvet fra F104WGP. Den utgjør bakopphenget sammen med friksjonsplater og en TRF-demper. • Har front uavhengig spiralfjæroppheng. Endre camber ved å endre retning for øvre monteringsfeste. • Bruker en kuledifferensial av aluminium. Bakhjulene kan skiftes uten at de demonteres. • Et realistisk originalt lexan karosseri er inkludert. Designet er inspirert av 2017-trender, med en skarp, skrå nese og svulmende sidepontonger. Ekstra deler er inkludert for å lage alternative nedre sidepontongseksjoner som separate deler for chassis med større R/C-utstyr. • Separate deler viser den komplekse frontvingen og dens lave bakre motstykke, bakre diffusor, speil, hjelm osv. • Leveres med realistiske semi-pneumatiske syntetiske gummidekk, og merkeklistremerker for å dekorere kroppen. • Et bredt utvalg av Hop-Up Option-deler er tilgjengelig for å justere chassiset ytterligere til dine behov.

3.695,-

3.995,-

KJØP

-8%

Tamiya 58653 1/18 King Yellow 6x6 School Bus GS-01 Kit

Art.nr: 58653

Copied

This is the Tamiya 1/18 scale Radio Controlled, Electric Powered King Yellow 6x6 Off-Road School Bus Kit. FEATURES Chassis: G6-01 plastic monocoque Drive: Six wheel gear driven Motor: 540 brush equipped, front-center mounted Body: Clear polycarbonate with separate detail parts Suspension: Six wheel double wishbone Shocks: Friction, not oil-filled Front Bumper: Spring loaded INCLUDES 1/18 scale King Yellow 6x6 School Bus Kit, Clear Body, Decals Tires, Wheels, Instruction Manual REQUIREMENTS Radio: 2-channel with high-torque steering servo ESC: Tamiya TEU-302BK recommended Battery: 7.2V 6-cell stick pack with Standard connector Battery Charger: Compatible with selected battery Polycarbonate safe spray or brush-on paint Building and track equipment

2.495,-

2.795,-

Ikke på lager

-11%

Tamiya 58654 1/10 Lancia 037 Rally TA02-S 4WD Kit no ...

Art.nr: 58654

Copied

A spirited scale racer. The original, full-size Lancia 037 Rally was one of the most celebrated World Rally Championship racers of the 1980s. Now, you can bring home a classic with this 1/10 scale 4WD kit from Tamiya. Its short wheelbase reproduces the scale form of the full-size car, while a powerful 540 motor, ESC and fully independent suspension help speed up assembly so you can be out racing faster! TA02-S tub chassis with short wheelbase. Four-wheel drive. 540-size motor. Need ESC with forward and reverse modes. This is the Tamiya Radio Controlled, Electric Powered, 1/10 Scale, Lancia 037 Rally Car Kit. FEATURES Chassis: Tub design TA02-S short wheelbase Drive: Four wheel Motor: 540 size brush equipped Electronic Speed Control: Not incl. Suspension: Fully independent double wishbone Differentials: Front gear type, rear ball type Body: ABS plastic with separate clear plastic piece for windows separate plastic sheet with driver and passenger Wheels: Plastic with brushed chrome finish, 0.94" (24mm) wide 1.9" (48mm) diameter Tires: Radial tread, 0.94" (24mm) wide, 2.5" (65mm) outer diameter with foam inserts Caster: Adjustable front only, caster/toe-in refers to the angle of the suspension when viewed from the side of the car in relation to the chassis Camber: Non-Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle INCLUDES Lancia 037 1/10 scale Rally Car Kit with Motor, Tires, Wheels, 21T Pinion Gear, 74T Spur Gear, Body Accent and Sponsor Decals ABS Plastic Body and Instruction Manual REQUIREMENTS Radio: 2-channel with high-speed steering servo and esc. Battery: 6-cell NiMH stick pack with standard connector Battery Charger: To match selected battery Transmitter batteries, paint, building and track equipment SPECIFICATIONS Vehicle; Finished sizes such as length and width not supplied by manufacturer Wheelbase: 10.2" (260mm) Body; Length: 15.2" (387mm) Width: 6.9" (176mm) Height: 3.9" (100mm) COMMENTS To paint the body to match the pictures on the box, the following Tamiya colors are required, TS-26 Pure White X-2 White X-6 Orange X-11 Chrome Silver X-18 Semi Gloss Black X-26 Clear Orange X-27 Clear Red XF-1 Flat Black XF-2 Flat White XF-7 Flat Red XF-8 Flat Blue XF-15 Flat Flesh XF-19 Sky Gray

2.495,-

2.795,-

KJØP

-11%

Tamiya 58655 1/10 Citroen 2CV Charleston M-05 Kit

Art.nr: 58655

Copied

This radio control model faithfully recreates the world-renowned Citroën 2CV Charleston. The polycarbonate body sits on top of Tamiya’s fun to drive M-05 front wheel drive chassis. Over 3.5 million cars were produced from 1948 to 1990. Its reliable air-cooled 2-cylinder engine got the little front wheel drive car from A to B with little fuss, and the car could accommodate 4 adults adequately. With its soft suspension designed for off-road driving, it is said that the 2CV could traverse a ploughed field without breaking any of the eggs it carried. M-05 at a glance: The front wheel drive M-05 chassis features a lightweight, narrow, durable, and easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provide stable high-speed cornering. Gun metal color 11-spoke wheels are matched with tread-patterned radial tires and feature tire inserts. Specifications: 1/10 scale R/C model assembly kit.The 1982 model year 2CV Charleston body is accurately rendered in lightweight and durable polycarbonate.Separate injection molded parts are included to recreate front bumper support, headlights and side mirrors. The M-05 chassis is a compact unit based around a lightweight monocoque and offering great weight distribution with a low center of gravity. 239mm L wheelbase. M-05 has a wide range of Hop-Up Option parts available to tune the chassis. Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor-based brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit) Includes 540-type Motor. Required for completion; 2 Channel Radio System, 1 Servo, Battery and Charger, Polycarbonate Paint for the Body, Tools for assembly

1.695,-

1.895,-

KJØP

-11%

Tamiya 58656 190 E E2 ZAKSPEED DEBIS TT-01E NO ESC

Art.nr: 58656

Copied

This is a classic Mercedes race car from the early 1990’s. It replicates the iconic 190 E 2.5-16 Evo.II. The livery in this kit faithfully replicates the colors of the Team Zakspeed car which ran in the 1991 DTM. Of special historical racing note; in races 6 and 7 of the season, the no.20 car was piloted by a young Michael Schumacher, who later went on to win 7 Formula One World Championships. The main sponsor of the car was Daimler-Benz’s now-defunct group company Debis. TT-01 E (Evolved Chassis) The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon top deck and gear covers improving rigidity, as well as a 3-piece tie rod providing smooth steering action. The low center of gravity, highly balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce a fun driving car. • 1/10 scale R/C model assembly kit. Length: 445mm, width: 184mm. • Body is made of durable polycarbonate, with separate molded mirror, wing and grille parts, as well as a plated Mercedes-Benz 3-pointed star emblem. • Marking stickers included to recreate sponsor logos and numbers on the No.20 car. • 6-spoke wheels are molded in soft green and paired with slick tires. • The TT-01 Type-E chassis features shaft-driven 4WD system and full independent suspension that offers easy handling and great customizability. • Requires: R/C equipment (transmitter, servo,esc), battery pack and charger to complete and Tamiya PS spray paint.

1.495,-

1.695,-

KJØP

-12%

Tamiya 58657 LAND ROVER DEFENDER 90 CC-01 KIT

Art.nr: 58657

Copied

RC LAND ROVER DEFENDER 90 This is a radio control assembly kit of the Land Rover Defender. It is an enduring vehicle that traces its lineage back to the original Land Rover cars first released in the immediate post-WWII era. This model recreates an early version of the Defender 90 (named on account of its wheelbase length), the shorter wheelbase variant of the car. CC-01 Chassis Excellent ground-hugging, long-stroke suspension system consists of front double wishbone and rear 4-link rigid setups and is equipped with 4 oil dampers. Highly reliable and efficient full-time 4WD system features a front-mounted motor, which transmits power to the front wheels via the gearbox and to the rear wheels via the propeller shaft with universal joints. Front and rear differentials enable smooth cornering. For even greater off-road performance on rough terrain, the rear differential may be locked during assembly. • 1/10 scale R/C model assembly kit. Length: 457mm, width: 200mm, height: 214mm, wheelbase: 242mm. • Polycarbonate body. • Includes separately molded ABS plastic parts for grille, side mirrors, light cases and tire cover. • Compatible with 5mm-diameter LEDs (White) x2 for headlights and 5mm-diameter LEDs x6 for the rear. • Matte plated wheels are paired with realistic tires featuring authentic tread pattern. • Highly reliable CC-01 chassis features a full-time 4WD system and front double wishbone, rear 4-link rigid suspension equipped with 4 CVA oil dampers. • Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit) • Requires: R/C equipment (transmitter, servo), battery pack and charger to complete and Tamiya PS spray paint. SPECIFICATIONS Adjustable Gear Ratio Yes Bearings Plastic Bushings Body Material Polycarbonate Body Stickers Vinyl Chassis Material ABS Plastic Chassis Type CC-01 Construction Type Assembly Kit Differential Type Gear Differential Drive Type 4WD Electronic Speed Control (esc) TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit) Led Lights Included Motor 540 Brushed type Requires A 2-channel radio, steering servo, 7.2volt battery & battery charger, and Tamiya PS paint. Scale 1/10 Shock Damper Plastic Oil-Filled Suspension Independent Front/4-Link Rear Terrain Use Multi-terrain Denne trenger lakk. Tamiya PS lakk!

3.495,-

3.695,-

KJØP

-5%

Tamiya 58658 TB-05 PRO CHASSIS KIT

Art.nr: 58658

Copied

RC TB-05 PRO CHASSIS KIT DESCRIPTION This is the 5th generation TB touring car chassis. It is an efficient shaft-driven 4WD model in which many of Tamiya’s popular sports car and GT racing body sets may be fitted to. The chassis itself is a completely new design that brings significant changes compared to previous models. First, its composite structure with integrated lower deck and side frame sections facilitates a largely symmetrical design for balanced steering response. Secondly, the chassis has two motor installation layouts, which allows you to tune the balance of the car depending on the track layout. Lastly, the proven suspension components from the TA07 PRO are used and are compatible with all existing suspension mount options available from the TA-07 and TRF419X chassis models. The kit comes with full ball bearings, aluminum propeller shaft, universal shafts and oil-filled gear differential units, which help keep the drivetrain smooth and efficient. • 1/10 scale R/C chassis assembly kit. Length: 370mm, width: 187mm, wheelbase: 257mm. • Racers can choose between 2 inline motor positions: In the front-center for emphasis on stability, or in the rear for more focus on acceleration. • Utilizes TA07 PRO suspension components. • Steering Ackerman inspired by the TB EVO. 7. • Includes TRF special shock dampers. • Aluminum center propeller shaft. • Front and rear gear differential units (TB-04 design) • Steering linkage is attached to TB-04 design bulkheads for minimum chassis roll. • Wheels and hi-torque servo saver included. • Compatible with IFMAR/ROAR battery pack sizes. • Requires: Body, motor, tires, R/C equipment (transmitter, servo and ESC), battery pack and charger to complete race spec car. TB-01 Blank Setting Sheet: Keep your track settings organized with the TAMIYA car setting sheet. Simply print and fill out or save it to your computer and fill in your settings digitally. Download TB-05 Setting Sheet Blank

3.995,-

4.195,-

-5%

Populært i denne kategorien

SamiRC Norge AS

Om oss

Kundeservice

Totalt:

Kategorier

Nylige søk

Søkeresultater

Biler

Populært i denne kategorien

Totalt:

Tamiya El-biler

Kyosho-Biler

Mini-Z

Carson

Tamiya Lastebiler

Reservedeler til Lastebil

Reservedeler til Hengere

E-flite RC

Traxxas & Latrax Reservedeler

Sendere

Spektrum sendere

Spektrum mottakere

Mottakere

Spektrum Mottakere

Telemetri

Hitec

Servoer

Servoer etter størrelse

Reservedeler

Option-parts

Option Parts Biler

Tamiya Biler

Servo anbefalinger til biler

Maverick biler

Traxxas biler

Kyosho biler

Mini-Z biler

Tamiya biler

HPI Biler

Redcat

Servo anbefalinger til båt

Crawler motor & regulator

Børsteløs/Brushless

Børsteløs combo

Børsteløs motor

Børsteløs Bil motor

Børsteløs regulator

Reservedeler til motorer

Flymotorer

OS motorer

Lipo

Lipo 3 celler 11.1 volt

3 celler sortert etter plugg

Lipo 4 celler 14,8 volt

4 celler sortert etter plugg

NiMH

Mottakerbatteri

Batteri etter produsent

LiFe

Traxxas Biler

Traxxas 68086-4 Slash 4x4 VXL

Traxxas Båter

Alle fly

Redcat Biler

Maverick biler

Kyosho biler

Kyosho Mini-Z

HPI biler

Reservedeler etter Produsent

Traxxas El-Biler

Arrma

Traxxas Nitro-Biler

Tamiya El-Biler

TT-01

Axial El-Biler

SCX10 Honcho

Kyosho-El-biler

Mini-Z deler

Kyosho Fazer D2 FZD2

Utgåtte Kyosho biler

Kyosho Nitro Biler

RC4WD-Biler

Vaterra-Biler

WL-Toys

HAIBOXING Biler

Helion-biler

BSD Biler