Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Traxxas Nitro-Biler / Jato 3.3 / Traxxas 5538 Front Turnbuckles 61mm Jato

Traxxas 5538 Front Turnbuckles 61mm Jato

Art.nr: TRX 5538

105,-

Traxxas

Traxxas
På lager: 1

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

  These are the 61mm Front Turnbuckles
              for the Traxxas Nitro Jato Stadium Truck.

FEATURES: Metal and Nylon Construction
          Black and Silver in Color
          Assembled w/Rod Ends

INCLUDES: Two 61mm Front Tie Rods
          Four Rod Ends
          Four Hollow Balls

REQUIRES: Assembly onto Vehicle

 

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 5428 Front Spring Shock GTR 0.9 Orange Jato ...
Traxxas 5428 Front Spring Shock GTR 0.9 Orange Jato ...
This is the Super Shock Spring 0.9 Orange               for the Traxxas Nitro Jato Stadium Truck. FEATURES: Metal construction           White in Color           Orange Weight Rating 0.9 INCLUDES: Two Super Shock Springs Orange 0.9 REQUIRES: Assembly onto Vehicle

59,-

** Ikke på lager
KJØP
Hovedbilde Traxxas 5561 GTR Shocks Assembled w/o Spring Jato (2)
Traxxas 5561 GTR Shocks Assembled w/o Spring Jato (2)
This is a pair of GTR Composite Shocks without Springs for the                            Traxxas Jato. FEATURES: Factory assembled for front installation on the Jato (1.4mm piston),             for rear use, the installed pistons must be replaced with             included 1.3mm rear pistons INCLUDES: Two GTR Composite Shocks, bottle of silicone shock oil, two 1.3mm             pistons and instruction sheet REQUIRES: Springs depending on desired stiffness SPECS:    Length: 3" (76mm)           Diameter: 0.61" (15.5mm) main body

269,-

På lager 1
KJØP
Hovedbilde Yeah Racing DDL-100RD 100mm Desert Lizard Two Stage ... Hovedbilde Yeah Racing DDL-100RD 100mm Desert Lizard Two Stage ...
Yeah Racing DDL-100RD 100mm Desert Lizard Two Stage ...
Yeah Racing 100mm Desert Lizard Two Stage Internal Spring Damper Pair Red For Crawler Description: Introducing the Yeah Racing Desert Lizard internal spring shock for crawlers, comes pre-assembled for easy upgrading your current rig! Comes with a full set of springs and machined pistons for you to setup your rig for all sorts of different conditions! Included are springs for you to build either a droop or a sprung setup, a sprung setup will create a rig which will generate a lot of flex and more suspension travel. For the droop setup, your rig will sit lower and because of a spring under the piston, will be less prone to rolling over but will generate less flex. Featuring a triple O-Ring sealing cartridge which will prevent shock oil leakage! *Photos for reference only. Feature: For: HPI Crawler King / Gmade R1 KOMODO / Vaterra K5 / AXIAL SCX10 / RC Crawlers Material: Aluminum Normal length : 100mm Compressed length : 78mm Stretch length : 110mm Include: Yeah Racing 100mm Desert Lizard Two Stage Internal Spring Damper (2 pcs) Springs (16 pcs) Pistons (8 pcs) Mounting Hardware (1 pack) Manual:

349,-

399,-

** Ikke på lager
KJØP
-13%
Hovedbilde Dynomax 9533 Connector Tamiya Pair
Dynomax 9533 Connector Tamiya Pair
Connector Tamiya Pair

25,-

35,-

På lager 2
KJØP
-29%
Hovedbilde Absima 400CPS / 34WT Silicone Shock Oil 60ml
Absima 400CPS / 34WT Silicone Shock Oil 60ml
Features: Viscosity 400CPS / 34WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. ●Scope of delivery : 1 bottle /60ml

79,-

** Ikke på lager
KJØP
Hovedbilde BSD 7003WT WATER PROOF 7003WT ESC BRUSHED 1/10 Tamiya
BSD 7003WT WATER PROOF 7003WT ESC BRUSHED 1/10 Tamiya
WATER PROOF SPEEDCONTROLLER BRUSHED ESC for bil, SPRUTSIKKER TAMIYA KONTAKT   WP1040 BRUSHED : Constant 45A Input: 4-9 cells NiMH/NiCd or 2-3S LiPo.   BEC: 5V/2A 

499,-

529,-

** Ikke på lager
KJØP
-6%
Hovedbilde RC4WD 0055 1/10 High Performance LED Light Bar
RC4WD 0055 1/10 High Performance LED Light Bar
This is the RC4WD 1/10 scale High-Performance LED Light Bar.     FEATURES For a variety of applications on 1/10 scale vehicles, reversible  "L" brackets to fit many applications  Works with up to 3-cell LiPo with use of a BEC to regulate voltage  below 7.4V  Thirty two individual LED bulbs  Adjustable "L" brackets for rotating light  Standard receiver plug connects to extra receiver channel  2mm mounting holes   INCLUDES RC4WD 1/10 scale High-Performance LED Light Bar   SPECIFICATIONS  Overall Length: 3.76" (95.5mm)  Light Bar Width: 2.95" (75mm)  Overall Height: 0.82" (21mm)  Light Bar Height: 0.63" (16.2mm)  Weight: 1.2oz (34g)

549,-

599,-

På lager 2
KJØP
-8%
Hovedbilde Traxxas 2441A Camber Links
Traxxas 2441A Camber Links
Camber link set for Bandit (grey) (plastic/ non-adjustable)

39,-

På lager 1
KJØP
Hovedbilde Traxxas 2750R Suspension arms, long (rear)
Traxxas 2750R Suspension arms, long (rear)
Suspension arms, long (rear) for Traxxas Bandit.

95,-

På lager 1
KJØP
Hovedbilde Traxxas 3678 Wheelie Bar Assembly ...
Traxxas 3678 Wheelie Bar Assembly ...
This is an optional Wheelie Bar for the Traxxas                    Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, black in color           Installs at rear of chassis to prevent vehicle from flipping over             during wheelies INCLUDES: Assembled optional Wheelie Bar with mounting instructions and             hardware REQUIRES: Fastening to rear of chassis

209,-

229,-

På lager 1
KJØP
-9%
Hovedbilde Traxxas 5589X Sway Bar Kit Jato 3.3
Traxxas 5589X Sway Bar Kit Jato 3.3
This is a set of Anti-Roll Bars and Linkages for use                      with the Traxxas Jato 3.3 These are mounted onto the front and rear of the vehicle and help make the                vehicle more responsive to steering inputs. FEATURES: Optional part           Steel sway bar construction           Mouting hardware included INCLUDES: One front 1.3mm diameter sway bar           One front 1.5mm diameter sway bar           One rear 1.5mm diameter sway bar           One rear 1.3mm diameter sway bay           Two front sway bar links(short)           Two rear sway bar links (long)           Four 3x3mm set screws           Four ball studs           Four 3x6mm button head machine screws           One assembly and instruction sheet REQUIRES: Pliers           1.5mm hex driver

239,-

På lager 1
KJØP
Hovedbilde Traxxas 5533 Rear Left & Right Suspension Arms Jato
Traxxas 5533 Rear Left & Right Suspension Arms Jato
   These are the Rear Left and Right Suspension Arms             for the Traxxas Nitro Jato Stadium Truck. FEATURES: Nylon Construction           Black in Color INCLUDES: One Left Rear Suspension Arm           One Right Rear Suspension Arm REQUIRES: Assembly onto Vehicle

125,-

På lager 2
KJØP
Hovedbilde Traxxas 5279 Motor/Pinion Gear/Motor Brush EZ Start 2
Traxxas 5279 Motor/Pinion Gear/Motor Brush EZ Start 2
This is the Motor and Pinion Gear               for the Traxxas EZ Start 2 (R) System, TRX 5270R FEATURES: Pre-installed 10 tooth pinion gear INCLUDES: Motor and Pinion Gear for the Traxxas EZ Start 2 (R) System REQUIRES: Installing inside EZ Start 2 (R) case SPECS:    Length with shaft: 2.35" (59mm)           Can diameter: 1.09" (28mm)

189,-

På lager 1
KJØP
Hovedbilde Traxxas 5539 Turnbuckle Camber Links 58mm (2)
Traxxas 5539 Turnbuckle Camber Links 58mm (2)
These are the 58mm Turnbuckle Camber Links               for the Traxxas Nitro Jato Stadium Truck and Slash 4x4. FEATURES: Metal and Nylon Construction           Silver and Black in Color           Assembled w/Rod Ends           Can be Used on Front or Rear INCLUDES: Two 58mm Threaded Rods           Four 3mm Ball Ends           Four 3mm Hollow Balls REQUIRES: Assembly onto Vehicle

95,-

På lager 2
KJØP
Hovedbilde Traxxas 5531 Front Left & Right Suspension Arms Jato ...
Traxxas 5531 Front Left & Right Suspension Arms Jato ...
          These are the Front Left and Right Suspension Arms              for the Traxxas Nitro Jato Stadium Truck. FEATURES: Nylon construction           Black in color INCLUDES: One Left Front Suspension Arm           One Right Front Suspension Arm REQUIRES: Assembly onto Vehicle

125,-

På lager 1
KJØP
Hovedbilde Traxxas 6852X Driveshaft Assembly Rear Heavy Duty ...
Traxxas 6852X Driveshaft Assembly Rear Heavy Duty ...
This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas FEATURES: Black plastic and steel construction INCLUDES: Rear driveshaft assembly           Screw pin REQUIRES: Installation on vehicle

129,-

Ikke på lager
Ikke på lager
Hovedbilde Traxxas 1664 Shock Shafts Long LSII
Traxxas 1664 Shock Shafts Long LSII
This is the replacement front shock shafts for the Traxxas LSII. Includes: 2- front shock shafts.

39,-

På lager 4
KJØP
Hovedbilde Traxxas 2656 Shock Shafts Hard Chrome (2)
Traxxas 2656 Shock Shafts Hard Chrome (2)
This is a set of XXL shock shafts for the Traxxas shocks. Includes: Two shock shafts Features: hardened chrome/steel construction Specs: 2 1/8" long or 54mm          1/16" diameter or 1.5mm Requires: Extra long shocks Comments: These are threaded on one end, and have the slots for e-clips on the           other.

39,-

På lager 2
KJØP
Hovedbilde Traxxas 4915 Foam Body Washers T-Maxx (10)
Traxxas 4915 Foam Body Washers T-Maxx (10)
       These are Foam Body Washers for the Traxxas T-Maxx                       4WD Radio Control Monster Truck.       These body washers adhere to the inside of the body over the body               mount holes and cushions the body from vibration. FEATURES: Replaces damaged or missing body washers.           Adhesive on one side allows easy attachment to body.           Made of shock absorbing foam that helps to prevent splitting of body             at mounting holes. INCLUDES: Ten foam body washers for the Traxxas T-Maxx. REQUIRES: Peeling off paper backing and attaching at mounting holes on body. SPECS:    Outer Diameter: 5/8" (16mm)           Inner Diameter: 1/4" (7mm) COMMENTS: May be used on any lexan car body.

25,-

På lager 4
KJØP
Hovedbilde Traxxas 3195 Top Steel Drive Gear 22T Nitro Hawk
Traxxas 3195 Top Steel Drive Gear 22T Nitro Hawk
This is the 22 tooth, hardened steel top drive gear. Fits: Traxxas Rustler VXL/XL-5 Stampede VXL/XL-5 Bandit VXL/XL-5 1/10 Slash 2WD

39,-

Ikke på lager
Ikke på lager
Hovedbilde Traxxas 4686 Spur Gear 48P 86T
Traxxas 4686 Spur Gear 48P 86T
This is a Traxxas 48P, 86T Spur Gear for models with                        Torque Control Slipper Clutch. FEATURES: 48 pitch           86 tooth           Designed for models with a slipper clutch.           Black plastic construction INCLUDES: One spur gear SPECS:    Pitch:   48           Tooth:   86

39,-

På lager 6
KJØP
Hovedbilde Traxxas 3643 Turnbuckles Camber Link 49mm
Traxxas 3643 Turnbuckles Camber Link 49mm
These are the Traxxas 49mm Turnbuckle Camber Links                 for the Bandit, Rustler VXL and Stampede VXL. FEATURES: Metal and Nylon Construction           Silver and Black in Color           Assembled w/Rod Ends INCLUDES: Two rear 49mm (82mm center to center) turnbuckles REQUIRES: Installation on the vehicle

89,-

Ikke på lager
Ikke på lager
Hovedbilde Traxxas 2742X Rod Ends Short w/Hollow Balls (6)
Traxxas 2742X Rod Ends Short w/Hollow Balls (6)
This are Rod Ends Short for the Nitro T-Maxx.              These rods ends attach to turnbuckles for front/rear. FEATURES: Black nylon rod ends           Steel pivot balls INCLUDES: Six nylon rod ends           Six pivot balls REQUIRES: Turnbuckles: TRX 2742X SPECS:    Length: .695" (17.6mm)           Inner Diameter: .217" (5.5mm)

49,-

Ikke på lager
Ikke på lager
Hovedbilde Traxxas 2580 Button Head Machine Screw 3x20mm Revo (6) ...
Traxxas 2580 Button Head Machine Screw 3x20mm Revo (6) ...
This is a package of six 3x20mm Traxxas Button Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x20mm button head screw is required INCLUDES: Six 3x20mm Traxxas Button Head Screws REQUIRES: 2mm hex head wrench

35,-

På lager 4
KJØP
Hovedbilde Traxxas 5525 Rod Ends/Hollow Balls
Traxxas 5525 Rod Ends/Hollow Balls
These are the Rod Ends and Balls for the Traxxas Slash 4x4 and other Traxxas cars. FEATURES: Black nylon construction.           Steel hollow balls. INCLUDES: Twelve rod end/balls REQUIRES: Installing on Jato SPECS:   Length: 1-1/8" (28mm)          Width: 3/8" (9mm)  

119,-

129,-

På lager 4
KJØP
-8%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png