Hopp til innhold
-23%

"Bulk" Traxxas 6814 Differential Kit Center Slash 4x4

Art.nr: BULK TRX 6814

439,-

569,-

- 23%

"Bulk" Traxxas

Bulkvarer kan kun kjøpes når de er på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging ***

 

This is the Center Diff Kit for use on the Traxxas Slash 4x4.


FEATURES: Nylon construction
          Black in color


INCLUDES: One Center Diff Kit
          One each; 50T Gear (6842R)
                    52T Gear (6843R)
                    54T Gear (3956R)

 

Produsent

*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging ***

Kunder kjøpte også

Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw   For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

KJØP
This is the Diff Carrier/Gasket Set for the Traxxas Revo. FEATURES: Plastic Diff Carrier           Blue Rubber Shaft Gaskets           Black Rubber Diff Carrier Gaskets           Gray Teflon Washer INCLUDES: One Diff Carrier           Two Blue Rubber Shaft Gaskets           One Black Rubber Diff Carrier Gaskets           One Gray Teflon Washer REQUIRES: Assembly to vehicle

59,-

69,-

KJØP
-14%
This is the Center Driveshaft Cover for the Traxxas Slash 4x4 Vehicles. FEATURES: Clear nylon construction INCLUDES: One Center Driveshaft Cover REQUIRES: Installation over driveshaft SPECS:    Length: 210mm (8.3")           Width: 15mm (0.59")

59,-

KJØP
These are the Traxxas Telemetry Trigger Magnet Holders,                        Spur Gear/Telemetry Trigger Magnet FEATURES: Black plastic and metal construction INCLUDES: Two different plasting holders           One disk-shaped magnet           Three 8mm screws           Three 10mm screws SPECS:    Magnet diameter: 5mm           Magnet thickness: 2mm

35,-

Ikke på lager
This is the replacement Bulkhead Tie Bars for the Traxxas Slash 4X4. FEATURES: Aluminum construction           Anodized blue in color INCLUDES: Two bulkhead tie bars (front and rear) REQUIRES: Installation on the Slash 4X4

85,-

KJØP
NB! Traxxas har byttet delenummer fra TRX 6830 til TRX 6830X   This is the Front Bulkhead for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction           Black in color INCLUDES: One front bulkhead REQUIRES: Installation on chassis

75,-

Ikke på lager
This is the Rear Bulkhead for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction           Black in color INCLUDES: One rear bulkhead REQUIRES: Installation on Slash

75,-

KJØP
This is the Motor Mount for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction           Black in color INCLUDES: One motor mount assembled with a 3x6mm flat head machine screw           One 3mm locknut REQUIRES: Fastening to chassis and installing motor components and driveshaft SPECS:    Length: 90mm (3.54")           Width: 46mm (1.81")

49,-

Ikke på lager
This is 50K wt Differential Oil for the Traxxas Revo                   but can be used in other vehicles as well. FEATURES: 50K weight oil INCLUDES: 1.75 oz (50cc) bottle of oil w/ 1-1/2" (38mm) pointed fill cap

89,-

Ikke på lager
This is the Aluminum Center Driveshaft for the Traxxas Slash 4x4 Vehicles. FEATURES: Hollow aluminum construction           Anodized blue in color INCLUDES: One Aluminum Center Driveshaft REQUIRES: Installation on the vehicle SPECS:    Length: 215mm (8.5")           Diameter: 8.3mm (0.33")

125,-

KJØP
This is the Front and Rear Center Drive Hub Set for use on the                       Traxxas Slash 4x4 Vehicles. FEATURES: Nylon and steel construction INCLUDES: One Front Center Drive Hub           One Rear Center Drive Hub           One Screw Pin REQUIRES: Installation in drive assembly

59,-

KJØP
This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas FEATURES: Black plastic and steel construction INCLUDES: Rear driveshaft assembly           Screw pin REQUIRES: Installation on vehicle

129,-

Ikke på lager
This is the Aluminum Center Driveshaft for the Traxxas Stampede 4x4 Vehicles. FEATURES: Hollow aluminum construction           Anodized blue in color INCLUDES: One Aluminum Center Driveshaft REQUIRES: Installation on the vehicle SPECS:    Length: 215mm (8.5")           Diameter: 8.3mm (0.33")

109,-

KJØP
This is the Traxxas Power Cell 7.4V 7600mAh 25C 2S LiPo Battery with iD Connector. FEATURES Semi rigid construction does not require a hard case and eliminates wire harness connectors that can loosen and fail Engineered specifically to fit Traxxas models iD Auto Battery Identification allows Traxxas iD equipped chargers to automatically set and optimize charge settings for specific battery MAXX cable high-efficiency 12 gauge silicone jacketed wire INCLUDES Traxxas Power Cell 7.4V 7600mAh 25C LiPo 2S Battery with iD Connector and Integrated Balance Connector REQUIREMENTS Balancer and LiPo compatible charger such as the Traxxas AC Powered EZ-Peak Plus Battery Charger, TRX2970 LiPo charging bag SPECIFICATIONS Configuration: 2S2P Continuous Discharge: 25C (190A) Max Burst Rate: 50C (380A) Watt Hours: 56.24 Charge Rate: 1C (7.6A) Max Charge Rate: 2C (15.2A) Dimensions: 6.1 x 0.98 x 1.8" (155 x 25 x 45mm) Weight: 13.2oz (375g)

995,-

1.095,-

KJØP
-9%
LED lights, power supply (regulated, 3V, 0.5-amp)/ power tap connector (with cable)/ 2.6x8 BCS (2) This is the Power Supply for the LED Light Kit  for the 1/16 scale Traxxas Summit.     FEATURES 3V, 0.5 amp power output   INCLUDES Power Supply with Traxxas Battery Connector and two Light Harness  Connectors

249,-

279,-

KJØP
-11%
This is the LED Roof Lightbar in Chrome for the Traxxas 1/16 scale Summit. FEATURES Adds lights to the 1/16 scale Summit for added scale realism INCLUDES Four LEDs with Wire and Connector Four plastic Chrome Housings Three Zip Ties Mounting Bracket Instructions SPECIFICATIONS Width: 2.2" (55.5mm)

149,-

KJØP
This is the Front Hardened Steel Drive Hub for use on the Traxxas Slash 4x4. FEATURES: Hardened steel construction INCLUDES: One Drive Hub           One Screw Pin REQUIRES: Installation on the vehicle SPECS:    Length: 19mm (0.75")           Diameter: 12mm (0.47")

59,-

KJØP
This is the optional Sway Bar Kit for the Traxxas Slash 4x4. FEATURES: For front and rear application to reduce chassis roll in turns and             add stability INCLUDES: Two thick and two thin swaybars, two mounts, two linkage sets,             mounting haardware and instructions REQUIRES: Installing at front and rear of chassis

339,-

359,-

KJØP
-6%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png