Hopp til innhold

Traxxas 9656X Rebuild Kit Driveshaft #9655X Sledge

Art.nr: TRX 9656X

79,-

Traxxas

Traxxas

På lager: 3

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Traxxas 9656X

Rebuild kit, steel constant-velocity driveshafts, center (front or rear) (includes pins for 2 driveshaft assemblies) (for #9655X steel CV driveshafts)

Accessory part for these models:

  • Sledge®

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 9553X
Copied
Stub axles, hardened steel (2) (for steel constant-velocity driveshafts) (fits Sledge®) Give your Sledge® the ultimate driveline upgrade with these hardened steel front stub axles. Built for maximum strength and durability, these stub axles are a standard replacement for upgraded 9655X front CV driveshafts. They may also be used with Sledge's standard front CV driveshafts. Sold in pairs. Accessory part for these models: Sledge®

249,-

279,-

KJØP
-11%

Kunder kjøpte også

Stub axles, hardened steel (2) (for steel constant-velocity driveshafts) (fits Sledge®) Give your Sledge® the ultimate driveline upgrade with these hardened steel front stub axles. Built for maximum strength and durability, these stub axles are a standard replacement for upgraded 9655X front CV driveshafts. They may also be used with Sledge's standard front CV driveshafts. Sold in pairs. Accessory part for these models: Sledge®

249,-

279,-

KJØP
-11%
Wheel hubs, splined, 17mm (green-anodized) (4)/ 4x5 GS (4), 3x14mm pin (4) Set of four 17 mm green-anodized aluminum wheel hubs combine high-profile looks with superior strength. The special splined design locks into Traxxas splined wheels for precise alignment and unsurpassed grip. Includes 4x5 mm grub screws (4), and 3x14 mm pins (4). PLEASE NOTE: Maxx models require 8950X (standard width) or 8996X (WideMaxx®) Steel constant-velocity

239,-

259,-

KJØP
-8%
Wheel nuts, splined, 17mm, serrated (green-anodized) (4)

149,-

159,-

KJØP
-6%
Traxxas 9523G Chassis Brace Alu Green Sledge Chassis brace (T-Bar), 6061-T6 aluminum (green-anodized)/ 3x16 SS (2)

349,-

KJØP
Traxxas 9539G Shock Tower Front Alu Green Sledge Shock tower, front, 6061-T6 aluminum (green-anodized)

299,-

329,-

KJØP
-9%
Traxxas 9538G Shock Tower Rear Alu Green Sledge Shock tower, rear, 6061-T6 aluminum (green-anodized)

339,-

359,-

KJØP
-6%
Sway Bar Kit Sledge   Sway bar kit, Sledge™ (front and rear) (includes front and rear sway bars and linkage)

419,-

439,-

KJØP
-5%
Caster blocks (c-hubs), 6061-T6 aluminum (green-anodized), left & right/ kingpin bushings (4) Aluminum caster blocks improve the appearance, ruggedness, and control of your Sledge. The billet 6061-T6 aluminum construction adds strength and precision where you want it most. The brilliantly-anodized finish adds vibrant color to your vehicle and features a high-contrast laser etched TRX logo. Includes kingpin bushings (4) and 3x20 mm screws with threadlock (2).

899,-

979,-

KJØP
-8%
Carriers, stub axle, 6061-T6 aluminum (green-anodized) (left and right) Traxxas aluminum stub axle carriers improve the appearance and ruggedness of your Sledge. The machined billet 6061-T6 aluminum construction adds superior strength with a brilliant anodized finish. Includes 3x18 mm screws with threadlock (2)

829,-

869,-

KJØP
-5%
Traxxas 9547G Camber links, front, Sledge® (TUBES dark titanium-anodized, 7075-T6 aluminum, stronger than titanium) (117mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1) Add strength and style to your Sledge® with these colorful 117 mm (center to center) TUBES front camber links. Tubes aluminum camber links are lighter than steel and stronger than titanium. The secret lies in their unique hollow tube design which maximizes rigidity while reducing weight. Made from high-grade 7075-T6 aluminum, TUBES feature a brilliant anodized finish for extra style. A machined groove identifies the left-hand threads and the included 8 mm aluminum wrench helps prevent marring while adjusting the turnbuckles. TUBES come assembled with rod ends and hollow balls. Accessory part for these models: Sledge®

529,-

549,-

KJØP
-4%
Camber Links Rear Alu Green (2) Sledge Camber links, rear, Sledge® (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1) Add strength and style to your Sledge® with these colorful 144 mm (center to center) TUBES rear camber links. Tubes aluminum camber links are lighter than steel and stronger than titanium. The secret lies in their unique hollow tube design which maximizes rigidity while reducing weight. Made from high-grade 7075-T6 aluminum, TUBES feature a brilliant anodized finish for extra style. A machined groove identifies the left-hand threads and the included 8 mm aluminum wrench helps prevent marring while adjusting the turnbuckles. TUBES come assembled with rod ends and hollow balls.

589,-

629,-

KJØP
-6%
Toe Links Front Alu Green (2) Sledge Toe links, Sledge® (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (120mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1) Add strength and style to your Sledge® with these colorful 120 mm (center to center) TUBES toe links. Tubes aluminum toe links are lighter than steel and stronger than titanium. The secret lies in their unique hollow tube design which maximizes rigidity while reducing weight. Made from high-grade 7075-T6 aluminum, TUBES feature a brilliant anodized finish for extra style. A machined groove identifies the left-hand threads and the included 8 mm aluminum wrench helps prevent marring while adjusting the turnbuckles. TUBES come assembled with rod ends and hollow balls.

529,-

549,-

KJØP
-4%
Steering blocks, 6061-T6 aluminum (green-anodized), left & right/ steering block arms (2) Traxxas aluminum steering blocks combine total steering accuracy with bulletproof strength. Machined from solid 6061-T6 aluminum and protected with a brilliant anodized finish, these high-grade hop-up parts provide razor-sharp handling and high-tech style. The steering arms are replaceable with part 9636 for even more custom color options. Includes 3x10 mm screws with threadlock (4), 4x16 mm screws with threadlock (4), 3x18 mm screws (2), and locknuts (2)

599,-

639,-

KJØP
-6%
Servo Saver Post with Nuts Alu Green Sledge Servo saver post/ adjuster nut/ locknut (green-anodized, 6061-T6 aluminum) (1 each) Give your Sledge® a bold new look with this brightly-anodized 6061-T6 aluminum steering servo saver post. Includes adjuster nut and locknut.

149,-

159,-

KJØP
-6%
Drag Link Steering Alu Green Sledge Draglink, steering, 6061-T6 aluminum (green-anodized)/ 3x14mm SS (2) Give your Sledge® a bold new look with this brightly-anodized 6061-T6 aluminum steering drag link. Includes 3x14 mm shoulder screws (2)

99,-

109,-

KJØP
-9%
Traxxas 9629G Tie bars, front, 7075-T6 aluminum (green-anodized) (fits Sledge®) 7075-T6 is one of the strongest and most expensive aluminum alloys available. Traxxas milled these Sledge® front tie bars out of solid 7075-T6 billet for ultimate strength and durability. Beveled edges give the parts a stylish two-tone look with laser-etched logos for maximum impact. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time with no modifications required. Build your ultimate Sledge with Traxxas 7075-T6 aluminum accessories. Accessory part for these models: Sledge®

459,-

499,-

KJØP
-8%
Traxxas 9630G Tie bars, rear, 7075-T6 aluminum (green-anodized) (fits Sledge®) 7075-T6 is one of the strongest and most expensive aluminum alloys available. Traxxas milled these Sledge® rear tie bars out of solid 7075-T6 billet for ultimate strength and durability. Beveled edges give the parts a stylish two-tone look with laser-etched logos for maximum impact. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time with no modifications required. Build your ultimate Sledge with Traxxas 7075-T6 aluminum accessories. Accessory part for these models: Sledge®

459,-

499,-

KJØP
-8%
Traxxas 9554X Stub axles, hardened steel (2) (for use only with #9557 driveshaft) Accessory part for these models: Sledge®

249,-

KJØP
  Description: This is Traxxas X-Maxx Velineon 1200XL 4-Pole Brushless Motor. 1200KV   Feature: For: Traxxas X-Maxx Material: Metal Color: Black Traxxas 6.5mm bullet connectors   Include: Traxxas X-Maxx Velineon 1200XL 4-Pole Brushless Motor (1 pc)

2.695,-

2.895,-

KJØP
-7%
Traxxas 9536 Bumper & Skidplate Set Rear Sledge Bumper, rear/ skidplate, rear/ tie bar mount, rear/ 3x25 CS (2)

109,-

KJØP
Wing Mount Sledge

79,-

KJØP
Traxxas Differential Gasket Set E-Revo 2, Sledge Differential gasket/ x-rings (2)/ 12.2x18x0.5 metal washer (1)/ 12.2x18x0.5 PTFE-coated washer (1)  

49,-

KJØP
Traxxas 9517 Wing Black Sledge Wing (black)/ wing washer / 4x12mm FCS (2)

199,-

KJØP
Traxxas 9529 Bulkhead Front/Rear Sledge Bulkhead, front or rear

159,-

179,-

KJØP
-11%
Traxxas 9680 O-rings (6) O-rings (6) Set of six O-rings for use with Sledge® rear driveshafts

29,-

39,-

KJØP
-26%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png