Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Traxxas El-Biler / 95076-4 Sledge 1/8 Truck 6s / Traxxas 9524 Side Guards Chassis (2) Sledge

Traxxas 9524 Side Guards Chassis (2) Sledge

Art.nr: TRX 9524

129,-

Traxxas

Traxxas
På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Side Guards Chassis (2) Sledge

Side guards, chassis (left and right)/ 3x8 CCS (10)

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Hovedbilde Traxxas 950764 Sledge 1/8 Truck 6s Blue Hovedbilde Traxxas 950764 Sledge 1/8 Truck 6s Blue
Traxxas 950764 Sledge 1/8 Truck 6s Blue
Art.nr: TRX 95076-4-BLUE
Copied
Traxxas Sledge™ 1/8 Truck 6s - Blue Redefining 1/8 Scale Off-Road! Engineered. Tested. Built to a higher standard. The all-new Sledge is made to exceed your expectations for quality, toughness, and fun. The rock-solid chassis, massive steel drivetrain, ferocious 6s power, and race-inspired handling leave everything else in the dust. Engineered for 6s Power Sledge is the only truck in this class with a properly sized, 6s-capable driveline. Bigger gears. More steel. Basically bombproof. Sledge smashes the status quo to be the new standard for extreme 6s durability. Superior Chassis Strength Sledge is engineered to have the strongest chassis in the class. The triangulated chassis structure integrates a deep-formed aluminum plate with a multi-point composite truss system and the patent-pending full-length T-Bar™. Built on a solid foundation, Sledge is strongest where it matters most. New Clipless Body Remove and replace the body in just seconds with exclusive patent-pending clipless body solutions engineered by Traxxas. Sledge’s clipless body goes on smoothly with a satisfying snap. The body is designed to come off when YOU release it. Monster Servo Sledge is equipped with a high-performance metal gear servo that packs massive torque inside a heat dissipating aluminum center case. Powerful and reliable steering authority is assured with no upgrade required. VXL-6s Power System The Velineon VXL-6s features new hardware and new tuning specifically for the 2000kV motor. Together they deliver substantially more power under the curve for increased mid-range punch and hard-charging acceleration you can see and feel. Sledgehammer Tires Premium Sledgehammer® tires are standard equipment. No tire upgrade required. Durable foam inserts are designed to not bunch up or break down. Patent-pending Traxxas innovation improves the tire bonding process to reduce the chance of a blown-out bead while exploring the upper range of Sledge’s capability. What’s In The Box: Sledge, Ready-To-Race® monster truck with Traxxas 2000kV brushless motor VXL-6s waterproof electronic speed control with integrated telemetry Quick Start Guide TQi™ 2.4GHz radio system High quality maintenance tools Jumper plug (for 4s battery use) What You’ll Need: LiPo Batteries: Traxxas recommends dual 5000mAh 3-cell 11.1V Power Cell LiPo batteries for maximum performance. Dual 7600mAh 7.4V LiPo batteries or a single 6700mAh 14.8V LiPo battery will operate the vehicle with reduced performance. NiMH batteries are not supported. LiPo Balance Charger with iD™: Traxxas EZ-Peak® Live 4s-capable charger is recommended for easy and fast charging performance (model #2971). AA Alkaline Batteries: Four AA alkaline batteries for the transmitter. Specs: Length (including wing): 604mm Front Track: 459mm Rear Track: 459mm Ground Clearance: 50mm Weight (no battery): 5.77kg Height (overall): 214mm Wheelbase: 384mm Shock Length (front): 128mm Shock Length (rear): 144mm Tire Diameter: 170 x 84mm Wheel Diameter: 97mm (3.8") Speed Control: Velineon® VXL-6s (#3485) Motor (electric): Velineon® 2000kV Brushless Overall Drive Ratio: 17.2 (13/52 motor pinion and spur gear) Differential Type: Sealed, hardened steel bevel, limited slip Gear Pitch: Module 1.0 Chassis Structure/Material: 3.2mm aluminum plate Brake Type: Electronic Drive System: Shaft-driven 4WD Steering: Double-shear bellcrank w/metal servo arm Wheels & Tires: 3.8” wheels, pre-glued Sledgehammer® Tires & foam inserts Radio System: 2-Channel, TQi™ 2.4GHz Transmitter with TSM® receiver Servo: 2275 Waterproof, metal-gear (347oz-in torque) Top Speed: 112+ KPH with two 3S LiPo batteries and optional gearing (sold separately) Skill Level: 4 Battery Tray: Narrow configuration (L/W/H): 181 x 50 x 29/37/45mm* Wide configuration (L/W/H): 160 x 57 x 29/37/45mm* *Using included optional foam spacer Spec. Car Type: Truck, Truggy Delivered as: RTR (Ready-To-Run) Drive: 4WD Operating Mode: Electric Scale: 1/8 Suitable For: Experienced, Expert Surface: Grass, Gravel Length: 604 mm Ground Clearence: 50 mm Height: 214 mm Weight: 5770 g Width: 459 mm ESC: Traxxas Velineon VXL-6s Top Speed: 112km/h Transmitter: Traxxas TQi 2-Channel Motor Type: Brushless Motor/Engine: Traxxas Velineon 2000kV Battery: Not Included Charger: Not Included Water Proof: Yes

9.995,-

KONTAKT

Kunder kjøpte også

Hovedbilde Yeah Racing YBS-0036 Steel Bearing Set 26pcs Traxxas ... Hovedbilde Yeah Racing YBS-0036 Steel Bearing Set 26pcs Traxxas ...
Yeah Racing YBS-0036 Steel Bearing Set 26pcs Traxxas ...
Yeah Racing YBS-0036 Steel Bearing Set (26pcs) For Traxxas 1/8 Sledge Sealed Description: Replace or upgrade to a fullset of bearings for your car for a smoother and more efficient running car! No more looking up all the sizes you need and potentially getting the wrong ones with these custom sets for specific cars!   Feature:   For : Traxxas 1/10 Sledge Sealed Material : Steel Shielding: Rubber   Specification:   YB6011B  5mm x 8mm x 2.5mm (4pcs) YB6015B  6mm x 10mm x 3mm (4pcs) YB6017B  6mm x 13mm x 5mm (2pcs) YB6022B  8mm x 16mm x 5mm (6pcs) YB6025B  10mm x 19mm x 5mm (10pcs)   Include:   Total Bearing (26 Pcs)

269,-

299,-

KJØP
-10%
Hovedbilde Traxxas 9545 Servo Saver Sledge
Traxxas 9545 Servo Saver Sledge
Traxxas 9545 Servo Saver Sledge Servo saver/ servo saver spring/ servo horn, steering (assembled)

189,-

199,-

KJØP
-5%
Hovedbilde Traxxas Differential Gasket Set E-Revo 2, Sledge
Traxxas Differential Gasket Set E-Revo 2, Sledge
Traxxas Differential Gasket Set E-Revo 2, Sledge Differential gasket/ x-rings (2)/ 12.2x18x0.5 metal washer (1)/ 12.2x18x0.5 PTFE-coated washer (1)  

49,-

KJØP
Hovedbilde Traxxas 9515 Body Mount Rear Sledge
Traxxas 9515 Body Mount Rear Sledge
Body Mount Rear Sledge

199,-

KJØP
Hovedbilde Traxxas 9635R Steering Blocks Alu Red(Pair) Sledge
Traxxas 9635R Steering Blocks Alu Red(Pair) Sledge
Steering blocks, 6061-T6 aluminum (red-anodized), left & right)/ steering block arms (2) Traxxas aluminum steering blocks combine total steering accuracy with bulletproof strength. Machined from solid 6061-T6 aluminum and protected with a brilliant anodized finish, these high-grade hop-up parts provide razor-sharp handling and high-tech style. The steering arms are replaceable with part 9636 for even more custom color options. Includes 3x10 mm screws with threadlock (4), 4x16 mm screws with threadlock (4), 3x18 mm screws (2), and locknuts (2).

599,-

639,-

KJØP
-6%
Hovedbilde Traxxas 9552R Carriers Stub Axle Alu Red (Pair) Sledge
Traxxas 9552R Carriers Stub Axle Alu Red (Pair) Sledge
Carriers, stub axle, 6061-T6 aluminum (red-anodized) (left and right) Traxxas aluminum stub axle carriers improve the appearance and ruggedness of your Sledge. The machined billet 6061-T6 aluminum construction adds superior strength with a brilliant anodized finish. Includes 3x18 mm screws with threadlock (2)

829,-

869,-

KJØP
-5%
Hovedbilde Traxxas 9634 Suspension Arm Covers Rear L+R Black ...
Traxxas 9634 Suspension Arm Covers Rear L+R Black ...
Traxxas 9634 Suspension Arm Covers Rear L+R Black Sledge Suspension arm covers, black, rear (left and right)/ 2.5x8 CCS (12)

59,-

KJØP
Hovedbilde Traxxas 9557 Driveshaft Rear 5x131mm Sledge
Traxxas 9557 Driveshaft Rear 5x131mm Sledge
Traxxas 9557 Driveshaft Rear 5x131mm Sledge Driveshaft, rear (shaft only, 5mm x 131mm) (1) (for use only with #9554 stub axle)

109,-

KJØP
Hovedbilde Traxxas 9535 Bumper & Skidplate Set Front Sledge
Traxxas 9535 Bumper & Skidplate Set Front Sledge
Traxxas 9535 Bumper & Skidplate Set Front Sledge Bumper, front/ skidplate, front/ tie bar mount, front/ 3x25 CS (2

109,-

KJØP
Hovedbilde Traxxas 9549 Toe Links Front (2) Sledge
Traxxas 9549 Toe Links Front (2) Sledge
Traxxas 9549 Toe Links Front (2) Sledge Toe links, front (2) (assembled with hollow balls)

99,-

KJØP
Hovedbilde Yeah Racing YB6017B/S10 RC PTFE Bearing (6x13x5mm) ...
Yeah Racing YB6017B/S10 RC PTFE Bearing (6x13x5mm) ...
Yeah Racing RC PTFE Bearing (6x13x5mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing (#YB6017BS/10) RC Telfon Bearing (6x13x5mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation:     High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

89,-

99,-

KJØP
-10%
Hovedbilde Yeah Racing YB6025B/S10 RC PTFE Bearing (10x19x5mm) ...
Yeah Racing YB6025B/S10 RC PTFE Bearing (10x19x5mm) ...
Yeah Racing RC PTFE Bearing (10x19x5mm) 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6025BS/10) RC Telfon Bearing (10x19x5mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

109,-

119,-

KJØP
-8%
Hovedbilde Traxxas 9536 Bumper & Skidplate Set Rear Sledge
Traxxas 9536 Bumper & Skidplate Set Rear Sledge
Traxxas 9536 Bumper & Skidplate Set Rear Sledge Bumper, rear/ skidplate, rear/ tie bar mount, rear/ 3x25 CS (2)

109,-

KJØP
Hovedbilde Traxxas 9556 Driveshaft Center Rear 146.5mm Sledge
Traxxas 9556 Driveshaft Center Rear 146.5mm Sledge
Traxxas Driveshaft Center Rear 146.5mm Sledge Driveshaft, center, rear (shaft only, 4mm x 146.5mm) (1)

99,-

KJØP
Hovedbilde Traxxas 9517A Wing White Sledge
Traxxas 9517A Wing White Sledge
Traxxas 9517 Wing White Sledge Wing (white)/ wing washer / 4x12mm FCS (2)

199,-

KJØP
Hovedbilde Traxxas 9519 Mud Guards Rear Black (L+R) Sledge
Traxxas 9519 Mud Guards Rear Black (L+R) Sledge
Traxxas 9519 Mud Guards Rear Black (L+R) Sledge Mud guards, rear, black (left and right)/ 3x15 CCS (2)/ 3x25 CCS (2)

69,-

KJØP
Hovedbilde Traxxas 9548 Camber Links Rear (2) Sledge
Traxxas 9548 Camber Links Rear (2) Sledge
Traxxas 9548 Camber Links Rear (2) Sledge Camber links, rear (2) (assembled with hollow balls)

89,-

KJØP
Hovedbilde Traxxas 9633T Suspension Arm Covers Front L+R Orange ...
Traxxas 9633T Suspension Arm Covers Front L+R Orange ...
Traxxas 9633T Suspension Arm Covers Front L+R Orange Sledge Suspension arm covers, orange, front (left and right)/ 2.5x8 CCS (12)

59,-

KJØP
Hovedbilde Traxxas 9634T Suspension Arm Covers Rear L+R Orange ...
Traxxas 9634T Suspension Arm Covers Rear L+R Orange ...
Traxxas 9634T Suspension Arm Covers Rear L+R Orange Sledge Suspension arm covers, orange, rear (left and right)/ 2.5x8 CCS (12)

59,-

KJØP
Hovedbilde Traxxas 9547 Camber Links Front (2) Sledge
Traxxas 9547 Camber Links Front (2) Sledge
Traxxas 9547 Camber Links Front (2) Sledge Camber links, front (2) (assembled with hollow balls)

89,-

KJØP
Hovedbilde Yeah Racing YB6022M/S10 RC Ball Bearing (8x16x5mm) ... Hovedbilde Yeah Racing YB6022M/S10 RC Ball Bearing (8x16x5mm) ...
Yeah Racing YB6022M/S10 RC Ball Bearing (8x16x5mm) ...
RC Ball Bearing (8x16x5mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing (#YB6022MS/10) Ball Bearing (8x16x5mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings.

79,-

89,-

KJØP
-11%
Hovedbilde RPM 70982 Bumper with Skidplate Front Sledge Hovedbilde RPM 70982 Bumper with Skidplate Front Sledge
RPM 70982 Bumper with Skidplate Front Sledge
RPM 70982 - Front Bumper & Skid Plate for Traxxas Sledge Quick Notes: Includes a longer and wider skid plate Front bumper width is 6-3/4″ (171.5mm) wide Replaces the bumper and skid plate from stock Traxxas #9535 he RPM Front Bumper and Skid Plate for the Traxxas Sledge is a unique design that works with the Sledge’s body mounting mechanism. Traxxas designed the body mounting system to move forward instead of rearward. Because it moves forward by well over 1” (25mm), it severely limits bumper design. However, RPM engineers found a way to incorporate a fully functioning bumper with this unique body mounting system. How did we do it? First, we eliminated the stock bumper and replaced it with a hinge pin retainer, since realistically, that’s all the stock bumper really is. Next, we eliminated the stock skid plate in favor of a wider, longer and more protective skid. Lastly, we bolted a unique bumper to the front of the skid plate. Our system sits below the body, which allows the body mounting system full range of motion, yet the Sledge finally has some tough, RPM front end protection. Each component is molded in black from our exclusive blend of engineering grade nylons for unmatched strength and durability. All RPM molded products are made in the USA and backed by our limited lifetime warranty against breakage. Tech Notes: The RPM Front Bumper and Skid Plate is designed specifically for the Traxxas Sledge and replaces the bumper and skid plate from stock Traxxas #9535.

269,-

KJØP
Hovedbilde Traxxas 9595 Sway Bar Kit Sledge
Traxxas 9595 Sway Bar Kit Sledge
Sway Bar Kit Sledge   Sway bar kit, Sledge™ (front and rear) (includes front and rear sway bars and linkage)

419,-

439,-

KJØP
-5%
Hovedbilde Hobbywing 30402800 EzRun 4278 G2 Brushless Motor ... Hovedbilde Hobbywing 30402800 EzRun 4278 G2 Brushless Motor ...
Hobbywing 30402800 EzRun 4278 G2 Brushless Motor ...
Sensorbasert børsteløs motor på 2250KV. Passer til bl.a. 1/8 konkurranse bruk ved bruk av 3-6s LiPo. Anbefales i bruk sammen med Hobbywin MAX8 ESC.   Sensormodus & høy effekt EZRUN-serien av motorer er kjent for å være dynamiske og dominerende. De er bygget annerledes for å møte behovene til ulike krav på markedet. Den har en sterk utgangseffekt med en utmerket linearitet ved lav hastighet og opererer i fullsensormodus.   En perfekt kombo med EZRun MAX8 G2 ESC Motoren oppnår perfekt kompatibilitet når den brukes sammen med EzRun MAX8 G2 ESC. Den gir ultra-stort dreiemoment. presis håndteringsytelse, og gir en jevn og komfortabel kontrollopplevelse til brukerne.   Materialer av høy kvalitet og utmerket produktdesign Materialene (motorhus, lagre, ultratynne silisiumstålplater, høytemperaturbestandig kobbertråd, eksplosjonssikker rotor, høytoleranselegeringsaksel) er nøye utvalgt og godkjent av våre interne ingeniører. Hobbywing er seriøs når det gjelder å gi brukere en ekstraordinær ytelse over lang tid.   Gjelder for alle værforhold Det vanntette IP-67-systemet garanterer utmerket vanntetting og støvtettingsbeskyttelse. Hele kraftsystemet er i stand til å kjøre på en rekke overflater, inkludert gjørmete, sandete, isete, snødekte og vann uten å skade kraftenheten.   Nytt sensorert kabelinterface Utstyrt med en ny type sensorert kabelgrensesnitt. Det er sterkt anbefalt å bruke motorene fra Hobbywing da det vanntette beskyttelsesnivået er på høyeste nivå (IP67).   Praktisk design for demontering og vedlikehold Motoren har en modulær avtakbar strukturdesign for enkel demontering og daglig vedlikehold. Dette bidrar til å forlenge levetiden til motoren og opprettholde effektiviteten til motoren enkelt.  

1.395,-

1.795,-

KJØP
-22%
Hovedbilde Traxxas 9526 Steering link (30mm) (1)/ hollow balls ...
Traxxas 9526 Steering link (30mm) (1)/ hollow balls ...
Traxxas 9526 Steering link (30mm) (1)/ hollow balls (2) Steering link (30mm) (1)/ hollow balls (2)

39,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png