Name: Traxxas 9036 Bumper Rear Hoss 4x4
Brand: Traxxas
SKU: TRX 9036
Price: 99.00 NOK
Availability: OutOfStock

Traxxas 2421 21T 48P Pinion Gear

This is the Traxxas 21T 48P Pinion Gear FEATURES: Made of steel INCLUDES: One pinion gear One setscrew, M3.0x4.0mm SPECS: Teeth: 21 Pitch: 48 Length: 10.5mm Diameter: 12mm Hole diameter: 3.4mm Length of teeth: 6.1mm

39,-

** Ikke på lager

KJØP

Traxxas 2388X Planetary Gear Differential w/Steel Ring ...

This is the Complete Planetary Gear Differential With Steel Ring Gear for the Traxxas Bandit, Stampede and Rustler. FEATURES: Metal gear shafts Metal and plastic main differential INCLUDES: Main differential with steel ring gear Planetary gears and shafts Sun gears and shafts Silicone grease REQUIRES: Installation on the vehicle COMMENTS: For main differential w/ steel ring - TRX 2381X Planet gear shafts - TRX 2382 Silicon grease - TRX 1647

179,-

189,-

På lager 2

KJØP

-5%

Traxxas 9069 Wheel Hubs 12mm Hex Steel HD (4) (for ...

Wheel hubs, 12mm hex (steel), extreme heavy duty (4)/ 2x9.8mm pin (4) (for use with #9080 upgrade kit and 6mm axles) Set of four replacement 12 mm steel wheel hubs for the 9080-series Extreme Heavy Duty Upgrade Kit. Includes 2x9.8 mm pins (4). Wheel hubs are for use with the 9080 upgrade kit only and will not fit standard axles.

129,-

139,-

På lager 7

KJØP

-7%

Traxxas 8241 Axle housing Front TRX-4

Axle housing, front

129,-

På lager 1

KJØP

Traxxas 6742R Toe Link Alu Red Front & Rear Complete ...

Toe links (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4)/ aluminum wrench (1)

439,-

På lager 2

KJØP

Traxxas 3643R Turnbuckle Complete Alu Red Camber Link ...

Camber links, front (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1)

439,-

459,-

På lager 2

KJØP

-4%

Traxxas 3767X Shock Caps Aluminum Anodized Red (4)

These are the Aluminum Red Shock Caps from Traxxas. FEATURES: Aluminum construction Anodized red in color Fits all Ultra Shocks INCLUDES: Four Aluminum Shock Caps REQUIRES: Installation on the shocks

179,-

189,-

På lager 1

KJØP

-5%

Traxxas 4974 Wheelie Bar Arm

This is the Wheelie Bar Arm for the T-Maxx 3.3. FEATURES: 4 snap-in adjustment positions to control degree of wheelie action easily removable if additional control isn't needed Constructed of hardened plastic, black in color INCLUDES: Wheelie Bar Arm with four Shoulder Screws REQUIRES: Fastening to chassis COMMENTS: For the 3.3 version only.

119,-

129,-

Ikke på lager

-8%

Traxxas 5186 Mounted Wheelie Bar Tires/Wheels Red (2)

These are the Rubber Tires and Wheels for the Wheelie Bar for all Traxxas vehicles. FEATURES: Tires constructed of rubber, black in color with with "TRAXXAS" written in white on the sidewalls Aluminum wheels, anodized red in color INCLUDES: Two Rubber Tires Trx 5185 four 5x8mm Ball Bearings, four Axles and two Wheels REQUIRES: Attaching to wheelie bar

239,-

259,-

På lager 2

KJØP

-8%

Traxxas 9037R Steering Blocks HD Red L+R (for Upgrade ...

Steering blocks, extreme heavy duty, red (left & right)/ 3x20mm BCS (2) (for use with #9080 upgrade kit) Replacement steering blocks for the Extreme Heavy Duty Upgrade Kit. Steering blocks are for use with the 9080 upgrade kit only and will not fit standard axles. Accessory part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4

69,-

** Ikke på lager

KJØP

Traxxas 9032R Caster Blocks (C-Hub) HD Red L+R (for ...

Caster blocks (c-hubs), extreme heavy duty, red (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit) Replacement caster blocks for the Extreme Heavy Duty Upgrade Kit. Caster blocks are for use with the 9080 upgrade kit only and will not fit standard suspension parts. Accessory part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4

89,-

På lager 3

KJØP

Traxxas 3655-RED Suspension arms, red, front/rear ...

Traxxas 3655-RED Suspension arms, red, front/rear (left & right) heavy Duty (2)

149,-

159,-

På lager 1

KJØP

-6%

Traxxas 9073 Tires & Wheels Sledgehammer Gray 3.0(2)

Traxxas 9073 Tires & Wheels Sledgehammer Gray 3.0 (2) Traxxas 9073 - Tires & wheels, assembled, glued (3.0" gray wheels, Sledgehammer® tires, foam inserts) (2) Scale: 1/8 Size: 3,0 Inch Suit: Buggy Drive: 17mm Hex

369,-

389,-

På lager 1

KJØP

-5%

Traxxas 3929 Screws, 4x18mm button-head machine (hex ...

Screws, 4x18mm button-head machine (hex drive) (6)

39,-

På lager 5

KJØP

Traxxas 5640 14T Pinion For 5mm Shaft

This is a Traxxas 14 Tooth Pinion Gear for a 5mm Motor Shaft. FEATURES: Silver in color Metal construction INCLUDES: (1) 14 Tooth Pinion Gear (1) One 4mmx3.5mm set screw REQUIRES: Installation on motor shaft SPECS: Outer Diameter: 15.5mm (0.61") Inner Diameter: 5mm (0.20")

59,-

På lager 4

KJØP

Traxxas 3070R Connector Traxxas iD 4S Male (2) (for ...

Traxxas® connector, 4s (male) (2) - FOR ESC USE ONLY FOR ESC USE ONLY The Traxxas 4s connector adds single 4s LiPo compatibility to the VXL-6s speed control. Requires 8527 jumper plug for unused battery lead. (Factory replacement plugs for 3465 and 3496 ESCs)

69,-

På lager 3

KJØP

Castle Creations 011000400 Vifte til Mamba Monster ...

This is the Motor Cooling Blower Fan and Shroud from Castle Creations. Features: Fits motors with outside diameter between 1-1/2 and 1-7/8" (38 - 47mm) such as the Castle Creations Neu-Castle 2200 and 2650 Plugs into receiver and drops motor temperature as much as 30°

269,-

På lager 10

KJØP

Traxxas 5626 Mamba Monster ESC Mounting Plate

NB!! Passer ikke til Mamba X må tilpasses. This is the Mamba ESC Mounting Plate from Traxxas. FEATURES: Nylon construction Black in color INCLUDES: One ESC Mounting Plate Two 3x35mm Cap Head Screws Foam Padding REQUIRES: Use with Castle Creations Mamba ESC

39,-

På lager 1

KJØP

Pro-Line 629700 Ridge-Line Trail Cage for 1966 Ford ...

Pro-Line Ridge-Line Trail Cage for Pro-Line 1966 Ford Bronco (3488-00) & SCX10 Deadbolt This is a Ridge-Line Trail Cage for Deadbolt. Introducing the brand new Ridge-Line Trail Cage that fits Pro-Line’s 1966 Ford® Bronco (3488-00) and the SCX10 Deadbolt! The Ridge-Line Trail Cage features a unique scale welded tube frame look that will separate your truck from the crowd. Molded into the cage are mounting locations to fit Pro-Line’s Overland Scale Roof Rack directly onto the roof as an option, which opens up the opportunity to mount Pro-Line’s 4” LED Light Bar Kit for a fully integrated factory look! The Cage comes with all of the hardware necessary for assembly and mounting. Features: Pro-Line style Ridge-Line Cage for Deadbolt Fits Pro-Line’s 1966 Ford® Bronco (3488-00) Perfectly Built-in Option to mount Pro-Line’s Overland Scale Roof Rack Made from High-strength, Durable Black Nylon Includes Assembly and Mounting Hardware Included: Ridge-Line Trail Cage Plastic Tree (1 pc) M3 x 12mm BHCS Cage Assembly Screws (10 pcs) M3 x 8mm BHCS Cage Mounting Screws (6 pcs) M3 x 6mm BHCS Front Hoop Assembly Screw (1 pc) Fits: Axial SCX10 Deadbolt Pro-Line 1966 Ford® Bronco Clear Body 3488-00

199,-

459,-

På lager 2

KJØP

-57%

Castle Creation Motor Sensor Inrunner 4-Pole ...

Castle 1512 1Y Sensored Motor - 2650KV You asked. We listened. For more than a decade Castle has been providing award winning brushless sensorless motors to R/C enthusiasts worldwide. In response to overwhelming requests by our customers, we have brought technological advancements together that will deliver unprecedented performance in our new SENSORED motor Line. Minimum Input Voltage : 3S Maximum Input Voltage : 4S Sensored Capable : Yes WHY SENSORED? Drivers in all applications demand clean starts when coming off the line. Crawler fans require high-precision low speed control and torque for climbing, racers need precision and predictability, and dragsters don’t have a millisecond to spare. To achieve all of these performance demands and more, we have integrated rotor position sensor technology with our improved high power and high efficiency motor design. Through the use of our sensors, the position of the rotor is always known by the ESC. This eliminates the possibility of encountering cogging or inconsistency during startup. Users will experience PRECISE throttle control and BUTTERY SMOOTH starts plus the RAW POWER and LONGER RUN TIMES that our highly efficient motors produce. WHAT MAKES AN EXCEPTIONAL MOTOR? When tasked with designing a sensored motor our engineers started with the question; What makes a motor great? Efficiency: You can push it harder (gear it up) You can run it longer (with the same battery) It stays cool under extreme loads Reliability: Ability to withstand the harsh demands of any RC application Long-life, high-quality components Proven manufacturing techniques EFFICIENCY IS KEY The higher the efficiency of a motor the more power it can produce without overheating, which allows you to safely run higher gear ratios. The higher the efficiency of a motor, the less power it takes to produce the same output power, which allows you to run longer on a single charge. The higher the efficiency of the motor, the less energy it turns into heat; keeping it cool under extreme loads. Efficiency equals performance. RELIABILITY CAN’T BE IGNORED Without a robust and reliable design, efficiency will only go so far. RC enthusiasts love pushing their equipment to the edge. The Castle engineers know this and spared no expense when developing a design that could hold up to the harsh conditions that the RC community will throw at it. Oversized NMB bearings and vibration dampening system ensure the longest bearing life possible. High-strength, high-temperature grade neodymium sintered magnets combined with a high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions. Our proprietary winding techniques allow us to produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor. A cooler motor has a longer lifetime. Construction of our motor required careful component selection; each verified through internal testing to ensure the highest efficiency possible. In the end, the result is a motor with unmatched quality, performance, and reliability. We wouldn’t put our name on anything less. THE DESIGN: KEEPING IT COOL Our IMPROVED 4-POLE 12-SLOT design boasts exceptional EFFICIENCY and produces LESS HEAT. QUIETSENSE™ technology shields the sensors from magnetic field noise generated from the motor coils and keeps your motor and ESC in sync at all times. Use of a Flux Shield™ in conjunction with secondary Sense Magnets delivers even HIGHER PRECISION and MORE EFFICIENT startups. Our OPTIMIZED design eliminates the need for mechanical timing adjustments. Our sensor alignment method delivers uniform timing and torque in both directions, automatically. REBUILDABLE design allows users to replace front end bell/bearing assembly or rotor/shaft assembly. ROAR standard sensor port and labeled connections. Updated modern and sleek design; looks as cool as it performs. Immense care is taken by our US design team during every step of the development process. While using the highest quality components is important, design is equally important. Our experienced, in-house engineering team, located in Olathe, Kansas, has spent countless hours simulating and developing the most efficient design. Development includes magnetic simulations, custom winding techniques, and rigorous, real-world testing of the final product. You will reap the benefits of longer run times on one battery and a cooler running motor that can be pushed harder. We take OVERPOWERING seriously. INTEGRATED SOPHISTICATION Castle engineers always add a little something extra in their designs that takes your performance to the next level. We have not skimped here. Many customers have utilized our industry leading software functionality that Castle Link* offers. When paired with a Castle Creations sensor supported ESC, like the MAMBA MICRO X, MAMBA MAX PRO or MAMBA MONSTER X, you can unlock advanced tuning capabilities that Castle Link provides specifically for sensored motors. SMARTSENSE™ uses the motors sensors to start the motor to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA- EFFICIENT sensorless mode. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at all load points. Using mechanical timing adjustments alone, you can only target one driving condition, such as higher start power or higher top end speed. This sacrifices performance and efficiency during the other driving phases. Electronic timing in SMARTSENSE™ will advance timing automatically for peak performance during all driving conditions. This allows users to combine the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless drive. With a Castle sensored ESC and sensored motor you will have the ULTIMATE POWER PLANT for your vehicle. Users will experience PRECISE throttle control, BUTTERY SMOOTH starts, PEAK PERFORMANCE and EFFICIENCY throughout the full throttle range. You will feel the POWER and LONGER RUN TIMES that a WORLD-CLASS motor produces. It’s not magic… it’s SMARTSENSE™. Technical Specs: Input Voltage Range: 3-4S LiPo Kv: 2650 Max. RPM: 60,000 Length: 67.7 mm Diameter: 40 mm Weight (w/wires): 383 g Shaft Length: 20 mm Shaft Diameter: 5 mm Mounting Hole Specifications: M3 & M4 @ 25 mm spacing Cooling Fan: Optional - Coming Soon Connectors: 6.5 mm male Castle Bullet Connectors Items Needed for Operation: Compatible Electronic Speed Control (ESC) Application Guidelines: Ideal for 1:8 scale off-road and on-road vehicles as well as 1:10 scale 4WD SCT up to 4 kg Recommended ESC(s): Mamba Monster X Max. Recommended Vehicle Weight: See application guidelines Tech Notes: Running modes: SMARTSENSE™, Sensored, Sensorless Comparable Turn Count: Turn count equivalent charts coming soon!

2.190,-

** Ikke på lager

KJØP

Traxxas 3465T ESC Velineon VXL-4s

Traxxas 3465T - ESC VXL-4S HO FWD/REV/BRK Velineon VXL-4s High Output Electronic Speed Control, waterproof (brushless) (fwd/rev/brake) The advanced Velineon® VXL-4s™ ESC pours on the power you demand for over-the-top fun. An integrated fan cools the oversized heatsink to keep ESC temperatures down and extend run times. Bright LED status lights keep you informed with temperature and voltage warnings. Internal safety programming constantly monitors ESC performance to protect it from damage. The VXL-4s comes pre-programmed with real-time telemetry capability using the optional 6511 Wireless Module (sold separately) installed in a Traxxas TQi™ transmitter. Use the free Traxxas Link™ App to see speed, RPM, voltage and ESC temperature directly on your mobile device.

1.595,-

1.695,-

På lager 1

KJØP

-6%

Traxxas 6788 Differential Front Pro-Built - 4x4

Traxxas 6788 - Pro-Built Front 4x4 Transmission/Differential Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale 4X4 Slash, Stampede®, Rustler®, Rally) As you probably know, Traxxas makes high-quality replacement parts for every vehicle that we sell. This makes it easy to keep your model running in peak form. For even faster, more convenient repairs and maintenance, Traxxas now offers Pro-BUILT™ components for the best-selling 2WD and 4X4 models, including E-Revo, Bandit, Rustler, Stampede, Slash, and Unlimited Desert Racer. Pro-BUILT components allow you to replace your model’s differential or transmission as a complete unit, no assembly required. Each Pro-BUILT component arrives ready-to-install, precisely assembled to Traxxas’ exacting standards and lubricated with factory-certified grease or oil. Pro-BUILT components save time and make it easy to restore like-new performance with factory-fresh parts in the driveline, where precision counts most. Pro-BUILT components ensure your model delivers all the performance, durability, and fun you expect from Traxxas. Fits: Ford Fiesta® ST Rally Hoss™ 4X4 VXL Rustler® 4X4 VXL Slash 4X4 Ultimate Slash 4X4 VXL Stampede® 4X4 VXL

439,-

469,-

På lager 2

KJØP

-6%

Yeah Racing WA-023BU Aluminum Hex Adaptor 15mm Offset ...

Yeah Racing Aluminum Hex Adaptor 15mm Offset For 12mm Hex Wheels Blue 4pcs Description: These offset hex adaptors allow you to drastically change the track width of your crawler. By increasing the trackwidth, the stability of your truck or rig will be increased as it will prevent it from toppling over on inclined climb spots! By increasing the trackwidth, your chassis flex is also increased due to a leverage effect of being able to put more force on the outter wheel which translates to more grip during climbs! Note: This will fit wheels with a center hole of at least 5mm. *Photos for reference only. Feature: For: 1/10 Crawlers Material: Aluminum Include: Aluminum Hex Adaptors (4 pcs) Aluminum Hex Locking Post (4 pcs) Set Screw (4 pcs)

219,-

249,-

** Ikke på lager

KJØP

-12%

Traxxas 6775X Anaconda/RXT Black & Chrome 2,8" ...

Traxxas 6775X Anaconda/RXT Black & Chrome 2,8" (TSM-Rated)(2) Tires & wheels, assembled, glued (2.8") (RXT black & chrome wheels, Anaconda tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated) Anaconda performance street tires feature a specially formulated tire compound providing exceptional wear and sticky traction. Anaconda tires are mounted and pre-glued on tough RXT black and chrome wheels for no-hassle, out-of-the-box bolt-on traction. Molded-foam inserts coupled with the directional tread design provide a balanced feel for the ultimate high-speed on-road experience. Anaconda tires and All Star wheels are also available individually.

359,-

379,-

På lager 4

KJØP

-5%

Yeah Racing YA-0641 Dual Tornado High Speed Fan ...

Yeah Racing Dual Tornado High Speed Fan 30x30mm for Motor Heat Sink Description: Need something more powerful than your existing motor / ESC fan? This is exactly the fan for you. Yeah Racing Tornado Cooling Fan has Ultra High Speed. You need unmatched performance that this fan delivers. This dual ball bearing fan flows up to 100% more air than other similar Fan. The maximum power input voltage is 8.4v (2 cells Li-Po) For the best performance, please run the Yeah Racing Tornado Cooling Fan for 2 - 3 hours continuously on the first time usage. Dual fans are wired so you only need one power port to run both fans at the same time! Feature: For: ESC / Heatsink / Motor Color: Black Material: Plastic Specification: Dimensions: 30 x 30 x 10mm Bearing: Dual Ball Bearing Operating: Voltage 5V Start-up Voltage: 3V Power: 1.40W Fan Speed: 14000 R.P.M (¡Ó20%) at 25¢J, after 3 min. rotating. Max Air Flow: 5.501CFM. Current: 0.28A Weight: 9.0g Connector: JST Include: Tornado Dual Fan (1 pc)

209,-

239,-

** Ikke på lager

KJØP

-13%

Traxxas 9036 Bumper Rear Hoss 4x4

Informasjon

Produsent

Traxxas

Kunder kjøpte også

SamiRC Norge AS

Om oss

Kundeservice

Totalt:

Søkeresultater

Traxxas 9036 Bumper Rear Hoss 4x4

Informasjon

Produsent

Traxxas

Kunder kjøpte også

Totalt:

Tamiya El-biler

Kyosho-Biler

Mini-Z

Carson

Tamiya Lastebiler

Reservedeler til Lastebil

Reservedeler til Hengere

E-flite RC

Traxxas & Latrax Reservedeler

Sendere

Spektrum sendere

Spektrum mottakere

Mottakere

Spektrum Mottakere

Telemetri

Hitec

Servoer

Servoer etter størrelse

Reservedeler

Option-parts

Option Parts Biler

Tamiya Biler

Servo anbefalinger til biler

Maverick biler

Traxxas biler

Kyosho biler

Mini-Z biler

Tamiya biler

HPI Biler

Redcat

Servo anbefalinger til båt

Crawler motor & regulator

Børsteløs/Brushless

Børsteløs combo

Børsteløs motor

Børsteløs Bil motor

Børsteløs regulator

Reservedeler til motorer

Flymotorer

OS motorer

Lipo

Lipo 3 celler 11.1 volt

3 celler sortert etter plugg

Lipo 4 celler 14,8 volt

4 celler sortert etter plugg

NiMH

Mottakerbatteri

Batteri etter produsent

LiFe

Traxxas Biler

Traxxas 68086-4 Slash 4x4 VXL

Traxxas Båter

Alle fly

Redcat Biler

Maverick biler

Kyosho biler

Kyosho Mini-Z

HPI biler

Reservedeler etter Produsent

Traxxas El-Biler

Arrma

Traxxas Nitro-Biler

Tamiya El-Biler

TT-01

Axial El-Biler

SCX10 Honcho

Kyosho-El-biler

Mini-Z deler

Kyosho Fazer D2 FZD2

Utgåtte Kyosho biler

Kyosho Nitro Biler

RC4WD-Biler

Vaterra-Biler

WL-Toys