Hopp til innhold

Traxxas 8672G Tires & Wheels 3,8" Talon EXT on Carbide Green 17m

Art.nr: TRX 8672G

569,-

Traxxas

Traxxas

På lager: 3

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Tires & wheels, assembled, glued (green wheels, Talon EXT tires, foam inserts) (2) (17mm splined) (TSM rated)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Body E-Revo Black Body, E-Revo, black/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting) Car Type: Truck Scale: 1/10, 1/8 Painted: Yes

949,-

999,-

KJØP
-5%
This is a Package of Replacement Caster Spacers for the Traxxas.                   These spacers adjust caster of the wheels. FEATURES: Black nylon construction. INCLUDES: Four caster spacers           Four caster shims REQUIRES: Nothing.  These are direct replacement parts. SPECS:    Thickness: 2mm (0.08")

39,-

KJØP
This is a replacement antenna tube. Antenna tubes are used to help secure and protect reciever antenna wires. INCLUDES: 1 blue antenna tube and 1 black antenna tube cap. SPECIFICATIONS: Length: 11"                 Outside Diameter: 1/8"

29,-

KJØP
 This is the 54T Spur Gear for the Traxxas XO-1. FEATURES: Molded plastic construction           1.0 metric pitch INCLUDES: 54T Spur Gear for the Traxxas XO-1

39,-

KJØP
TRX 7733, Traxxas 7733, 7733 This is the Bumper Mount and Front Bumper Support  for the Traxxas X-Maxx Monster Truck,     FEATURES Molded composite plastic construction   INCLUDES One each; Bumper Mount and Front Bumper Support

89,-

This is the Front Bumper for the Traxxas X-Maxx Monster Truck     FEATURES One-piece molded composite plastic construction   INCLUDES Front Bumper   SPECIFICATIONS  Length: 8.7" (222mm)  Height: 3.4" (87mm) measured at grille guard

109,-

119,-

KJØP
-8%
Wheel hubs, splined, 17mm (green-anodized) (4)/ 4x5 GS (4), 3x14mm pin (4) Set of four 17 mm green-anodized aluminum wheel hubs combine high-profile looks with superior strength. The special splined design locks into Traxxas splined wheels for precise alignment and unsurpassed grip. Includes 4x5 mm grub screws (4), and 3x14 mm pins (4). PLEASE NOTE: Maxx models require 8950X (standard width) or 8996X (WideMaxx®) Steel constant-velocity

239,-

259,-

KJØP
-8%
Plate, motor

139,-

KJØP
Oil Differential 20m Weight

179,-

KJØP
Suspension arms, green, front (right), heavy duty (upper (1)/ lower (1))

145,-

KJØP
Suspension arms, green, front (left), heavy duty (upper (1)/ lower (1))

139,-

KJØP
Suspension arms, green, rear (right), heavy duty, adjustable wheelbase (upper (1)/ lower (1))

145,-

KJØP
Suspension arms, green, rear (left), heavy duty, adjustable wheelbase (upper (1)/ lower (1))

139,-

KJØP
  Traxxas 13-Piece Tool Kit with Carrying Case       The Perfect Companion The new Traxxas Tool Kit includes virtually every tool required to maintain Traxxas vehicles and stores them in a handy carrying case. A comfortable ratcheting handle allows the 11 included bits to telescope for those hard-to-reach screws. The kit includes nut drivers, hex drivers, standard and Phillips head screwdrivers and a wrench. Tool Kit Features: Comfortable ratcheting handle with clear directional markings Telescoping bits provide easy access to virtually any screw Five nut drivers: 4, 5, 5.5, 7 & 8mm Six hex drivers: 1.5, 2, 2.5, 3, 3.5 & 4mm Three Phillips head screwdrivers: Size 00, 0 & 1 Three flat-head screwdrivers: Size 2, 3 & 4 Open-ended wrench: 4 & 8mm Tough zippered carrying case

389,-

429,-

KJØP
-9%
Body, E-Revo (clear, requires painting)/window, grill, lights decal sheet

349,-

369,-

KJØP
-5%
Push rods (steel), heavy duty (2) (assembled with rod ends)

99,-

KJØP
Chassis supports, front & rear/ 3x12mm BCS (4)/ 3x15mm CS (4)/ 4x14mm BCS (1)

129,-

KJØP
These are the Front or Rear Suspension Arms for the LaTrax Teton Monster Truck from Traxxas. FEATURES Composite plastic construction Fastens to front or rear bulkheads INCLUDES Two Front or Rear Suspension Arms

69,-

KJØP
This is the Rear Chassis Brace for the 1/10 scale Traxxas E-Revo.     FEATURES Aluminum construction, blue in color   INCLUDES Rear Chassis Brace  Two 3x35mm Socket Head Screws  One 4x14mm Button Head Screw  Instruction Sheet   SPECIFICATIONS  Length: 5.1" (129mm)

129,-

139,-

KJØP
-7%
Push rods, aluminum (green-anodized), heavy duty (2) (assembled with rod ends and threaded inserts)

299,-

KJØP
Driveshaft, center, 6061-T6 aluminum (blue-anodized) (189mm)

119,-

KJØP
Features: Viscosity 300CPS / 27WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. ●Scope of delivery : 1 bottle /60ml

75,-

KJØP
This is the Traxxas Power Cell 11.1V 4000mAh 25C 3S LiPo Battery.     FEATURES Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 12 gauge silicone jacketed wire   INCLUDES Traxxas Power Cell 11.1V 4000mAh 25C LiPo 3S Battery with High  Current Connector and Integrated Balance Plug   REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus  LiPo charging bag   SPECIFICATIONS  Configuration: 3S1P  Continuous Discharge: 25C (100A)  Max Burst Rate: 50C (200A)  Watt Hours: 44.40  Charge Rate: 1C (4A)  Dimensions: 5.3 x 1.02 x 1.7" (135 x 26 x 43mm)  Weight: 11.1oz (316g)   COMMENTS ALWAYS use a LiPo-approved Charger  ALWAYS use a LiPo Cell Balancer  NEVER Charge over 4.20V per cell  NEVER Trickle Charge  NEVER allow to Discharge below 3.2V per cell  NEVER disassemble or modify pack wiring in any way or puncture cells  NEVER place on combustible materials or leave unattended during  charging  ALWAYS Charge in a fireproof location  ALWAYS set charger's output volts to match battery volts  ALWAYS keep out of reach of children  

929,-

999,-

KJØP
-7%
There are the Long Shock Shafts for the Traxxas Nitro Rustler. FEATURES: Hardened steel and titanium nitride coated (Brass color) INCLUDES: Two shafts REQUIRES: Installation in shock SPECS:    Diameter: 3mm (0.118")           Length: 47 mm (1.85")           Thread: 3mm (0.118") COMMENTS: Uses 3mm e-clips

119,-

KJØP
This is the 54T Spur Gear for the Traxxas X-Maxx Monster Truck. FEATURES Hardened steel construction INCLUDES 54T Spur Gear SPECIFICATIONS Number of Teeth: 54 Pitch: 1.0 metric Pressure Angle: 20°

219,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png