Hopp til innhold

Traxxas 8630 Bulkhead Front Upper & Lower

Art.nr: TRX 8630

189,-

Traxxas

Traxxas

På lager: 3

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon


Bulkhead, front (upper and lower)/ 4x12mm BCS (6) (requires #8622 chassis)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

These are 3x25mm Button Head Machine Screws w/hex drive                         for the REVO from Traxxas. FEATURES: Black steel construction INCLUDES: Six 3x25mm Button Head Machine Screws REQUIRES: 2mm hex wrench SPECS:    Length:  25mm           Diameter: 3mm

35,-

KJØP
Tires, Talon EXT 3.8" (2)/ foam inserts (2)

369,-

389,-

KJØP
-5%
Wheels, 3.8" (black) (2) (17mm splined)

129,-

139,-

KJØP
-7%
Wheel hubs, splined, 17mm (red-anodized) (4)/ 4x5 GS (4), 3x14mm pin (4) Set of four 17 mm red-anodized aluminum wheel hubs combine high-profile looks with superior strength. The special splined design locks into Traxxas splined wheels for precise alignment and unsurpassed grip. Includes 4x5 mm grub screws (4), and 3x14 mm pins (4). PLEASE NOTE: Maxx models require 8950X (standard width) or 8996X (WideMaxx®) Steel constant-velocity

239,-

256,-

KJØP
-7%
These are the 17mm Splined Wheel Nuts for the Traxxas X-Maxx Monster Truck. FEATURES Aluminum construction, anodized red in color Threads onto stub axles to hold wheels in place INCLUDES Four 17mm Splined Wheel Nuts

149,-

159,-

KJØP
-6%
Toe links, 119.8mm (108.6mm center to center) (black) (2) (for use with #8995 WideMaxx™ suspension kit)

89,-

KJØP
These are the replacement Wheel Hub Ball Bearings for                    the Traxxas Nitro Revo Monster Truck. FEATURES: Stainless Steel Construction           Blue Rubber Sealed INCLUDES: Two 12mm x 18mm Blue Sealed Stainless Wheel Hub Bearings REQUIRES: Assembly onto Vehicle SPECS:    Outer Diameter: 18mm (0.70")           Inner Diameter: 12mm (0.47")           Thickness:       4mm (0.15") COMMENTS: These are for the Inside of the Wheel Hubs, the Truck Requires           Four Total of these Bearings.

109,-

KJØP
A full set of four hard anodised shocks with threaded bodies and TiN Shafts for super smooth action.  Spend less time rebuilding and more on the track!

919,-

KJØP
These are the replacement Differential Bearings for                   the Traxxas Nitro Revo Monster Truck. FEATURES: Stainless Construction           Blue Rubber Sealed INCLUDES: Two 8mm x 16mm Rubber Sealed Bearings REQUIRES: Assembly onto Vehicle SPECS:    Inner Diameter:  8mm (0.31")           Outer Diameter: 16mm (0.62")           Thickness:       5mm (0.19")

79,-

KJØP
This is the Traxxas Driveshaft Assembly Rebuild Kit for the Revo/Maxx. FEATURES: Restores performance to worn driveshaft components INCLUDES: Four Rubber accordian style dustboots, pins, and lube for two             driveshaft assemblies  

89,-

KJØP
   These are the Optional Pivot Balls for the Traxxas T-Maxx                        4WD Radio Control Monster Truck.     These pivot balls are installed through the upper and lower suspension        arms and axle carriers and allow camber adjustment of the wheels. FEATURES: Replace stock pivot balls with these hardened heavy duty versions.           Constructed of 7075 T-6 aluminum. INCLUDES: Four hard anodized 7075 T-6 aluminum pivot balls.           Four ball cap bushings. REQUIRES: Installing through the suspension arms (4931) and axle carriers             (4932).

245,-

KJØP
  This is a Green Tension Shock Spring Set for the Revo GTR Shocks.              These springs are installed on the shock bodies. FEATURES: Red in color           Orange band on spring indicates 3.2 tension rating INCLUDES: Two 3.2 rear shock springs REQUIRES: Nothing.  These are direct fit springs. SPECS:    Length: 1-3/4" (44mm)           Outer diameter: 0.83" (21mm)

75,-

KJØP
These are the 5107A 17 x 26 x 5mm Ball Bearings  for the Traxxas X-Maxx Monster Truck     FEATURES Steel construction with black rubber seals  Used in the front and rear differentials of the X-Maxx   INCLUDES Two 17 x 26 x 5mm Black Rubber Sealed Ball Bearings   SPECIFICATIONS  Inner Diameter: 17mm  Outer Diameter: 26mm  Thickness: 5mm

109,-

119,-

KJØP
-8%
Available in large 50ml and extra large 100ml bottles with convenient flip cap.  HUDY Ultimate Silicone Oils are manufactured in Europe by a specialized silicone oil premium manufacturer and were created exclusively for HUDY. Each batch of ultimate oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven cSt rating, the new line of oils will be easy to identify, adjust, and feel. HUDY oils cover the complete range from Ultra Thin (100cSt)... Thin (1000 cSt)... Medium (5000cSt)... Thick (10.000cST)... up to Extra Thick (1.000.000cSt), with numerous stages in between. Thinner oils are suitable for shocks (up to Medium), and thicker oils are suitable for differentials. With the available range, you will be able to find the correct viscosity you need for your application. Each category of oils is individually color-coded to allow you to instantly recognize the type of viscosity.   

169,-

KJØP
This is the 54T Spur Gear for the Traxxas X-Maxx Monster Truck. FEATURES Hardened steel construction INCLUDES 54T Spur Gear SPECIFICATIONS Number of Teeth: 54 Pitch: 1.0 metric Pressure Angle: 20°

219,-

KJØP
Dusty Motors Dust Protection Cover for Traxxas E-revo & Summit - Black DMC0011 This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to  keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.

359,-

KJØP
KJØP
Spring, shock red (GTR) (5.4 rate pink) (1 pair) Traxxas offers a wide variety of spring rates for the GTR shocks to precisely compensate for lighter or heavier truck configurations. The springs use high-quality spring steel with durable powder-coated finishes. Spring rate is indicated by colored dots on the end of the spring.

75,-

KJØP
Body support/ 3x12mm CS (4)

95,-

KJØP
Ball bearings, blue rubber sealed (12x21x5mm) (2)

99,-

KJØP
Body E-Revo Black Body, E-Revo, black/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting) Car Type: Truck Scale: 1/10, 1/8 Painted: Yes

949,-

999,-

KJØP
-5%
Toe links, E-Revo® VXL (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (8)/ aluminum wrench, 10mm (1)

549,-

599,-

KJØP
-8%
Traxxas 8686 - Pro-Built E-Revo VXL Front/Rear Differential Differential, front or rear, complete (fits E-Revo® VXL) As you probably know, Traxxas makes high-quality replacement parts for every vehicle that we sell. This makes it easy to keep your model running in peak form. For even faster, more convenient repairs and maintenance, Traxxas now offers Pro-BUILT™ components for the best-selling 2WD and 4X4 models, including E-Revo, Bandit, Rustler, Stampede, Slash, and Unlimited Desert Racer. Pro-BUILT components allow you to replace your model’s differential or transmission as a complete unit, no assembly required. Each Pro-BUILT component arrives ready-to-install, precisely assembled to Traxxas’ exacting standards and lubricated with factory-certified grease or oil. Pro-BUILT components save time and make it easy to restore like-new performance with factory-fresh parts in the driveline, where precision counts most. Pro-BUILT components ensure your model delivers all the performance, durability, and fun you expect from Traxxas. Fits: E-Revo® VXL Brushless

949,-

1.049,-

KJØP
-10%
This is a pair of pre-mounted Street Fighter HP 3.8" Belted Monster Truck Tires. Are you looking for the ultimate street tire for your 3.8" Monster Truck? Pro-Line now has the solution for you with the all-new Street Fighter HP BELTED 3.8" tires! Pro-Line has developed the technology to mold a High-Performance herringbone weave pattern Belt inside of the Street Fighter HP tires that will prevent the tire from ballooning or expanding during use. This will give you maximum control to put the power down even at high speeds! The Street Fighter HP 3.8" tires provide the incredible grip that you expect from Pro-Line due to the soft M2 compound and the aggressive tread grooves. Pro-Line also heard the calls for a new tire size to fit the current generation of Monster Trucks and the Street Fighter delivers at 3.11" wide and 6.22" tall. Just like all of Pro-Line's tires, they are proudly Made in the USA! Get maximum grip and stability so you can be faster than your buddies with Pro-Line's all-new Street Fighter HP 3.8" Monster Truck tires! Please note that the Street Fighter HP tires have a maximum speed rating that, if exceeded, could result in permanently damaging the internal belt. For the Street Fighter HP 3.8" tires that is 95 mph or about 5,000 RPM. Over revving your Street Fighter HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires. The new Belted Street Fighter HP 3.8" tires come Pre-Mounted on the next generation 3.8" wheel design from Pro-Line, the Raid 3.8" Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires! These new Raid 3.8" wheels make this possible by using a unique 8x32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The hexes are included and are also available separately (6345-00). The built-in adjustability and ease of use make this a new must-have wheel for bashers everywhere! Be the first to own the latest and greatest technology from Pro-Line, get the new Street Fighter HP 3.8" Belted tires now!

949,-

999,-

KJØP
-5%
Suspension arms, green, rear (right), heavy duty, adjustable wheelbase (upper (1)/ lower (1))

145,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png