Hopp til innhold

Traxxas 8486 Headlights LED Lightbar Desert Racer

Art.nr: TRX 8486

269,-

Traxxas

Traxxas

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

LED light bar, front (high-voltage) (52 white LEDs (double row), 100mm wide)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 8487
Copied
LED lightbar, rear, red (with amber class light) (high-voltage) (24 red LEDs, 24 amber LEDs, 100mm wide)

305,-

KJØP
Art.nr: TRX 8488
Copied
LED light bar, roof (curved, high-voltage) (52 white LEDs (single row), 202mm wide)

429,-

KJØP
Art.nr: TRX 6590
Copied
High-Voltage Power Amplifier The High-Voltage Power Amplifier #6590 takes power directly from the VXL-6s ESC and transforms it into steady, regulated current for long LED life. The waterproof amplifier includes four separate connection ports with a 3-mode toggle switch. Pair the amplifier with any of the Desert Racer light bars for a new level of scale lighting performance.  

639,-

679,-

KJØP
-6%
Art.nr: TRX 8489
Copied
2-in-1 wire harness, LED lights (high-voltage)

59,-

KJØP
Art.nr: TRX 8485
Copied
Pro-Scale™ High Intensity LED Light Kit for Unlimited Desert Racer Pro-Scale Realism Flood the desert with brilliant white light with the new High Intensity LED Off-Road Light Kit for the Traxxas Unlimited Desert Racer.  Traxxas innovation delivers features, performance, and detailed scale looks not found on any other lighting system. The included Traxxas High Voltage Amplifier packs the muscle to efficiently power the 204 individual LEDs in the kit while minimizing losses from excessive current and heat. The tightly regulated output provides stable lighting performance, without flickering or dimming as the battery voltage changes. In another Traxxas first, the smart brake lights work when brakes are applied in both forward and reverse directions. This eliminates the common and annoying problem with generic aftermarket systems that turn on the brake lights while reversing. DESERT RACER LED LIGHT KIT(#8485) INCLUDES: Dual straight LED bumper-mounted LED light bars (52 LEDs each) Curved roof light bar (52 LEDs) Multifunction red and amber brake light/class light bar (24 red and 24 amber LEDs) High-voltage 8-channel power amplifier for intense, brilliant LED lighting Regulated output for stable lighting performance (no flickering or dimming as the battery voltage changes)   Wiring is simple: Plug the main connector from the power amplifier into the power port on the Traxxas VXL-6s Electronic Speed Control, and then plug the individual lighting modules into the power amplifier. Switch between three manual lighting modes on the power amplifier (such as high beam and low beam), or use the Traxxas Link app and Wireless Module (#6511*) to control individual lights remotely and create custom lighting configurations. Of course, since it’s from Traxxas, this powerful, feature-rich system is rugged and fully waterproof for all of your exciting RC adventures. High-Voltage Power Rather than draw valuable power away from the BEC, the power amplifier uses the Power Port on the VXL-6s ESC to tap power directly from the batteries. The power amplifier transforms and regulates battery current to for reliable high-power performance. Technology Three different lighting modes on the amplifier let you control which lights illuminate. Use the Traxxas Link App* to further customize the lighting modes to your specifications or turn the lights on and off directly in the app. The kit includes all mounting hardware to make installation a breeze. The LED Light Bar Kit comes as a complete set or as individual components allowing Desert Racer owners to select the exact setup to meet their needs. QUICK FEATURES ON DESERT RACER LED LIGHT KIT(#8485) A Traxxas first! Fully functioning brake lights that work in both forward and reverse direction Fully waterproof Three default lighting modes controlled from the power amplifier Low and high beam brightness settings Easy to install with simplified, concealed, color-coded wiring Expandable Firmware updatable through the app App-controlled lighting functions* Turn lights on/off remotely Build a custom dashboard Customize lighting configurations and actions Add additional lighting components

1.795,-

1.895,-

KJØP
-5%

Kunder kjøpte også

Screws, 4x22mm button-head machine (hex drive) (6)

39,-

KJØP
Axle housing, rear/ axle supports, left & right/ axle hub, rear (2)

189,-

209,-

KJØP
-10%
Driveshaft, center rear, 6061-T6 aluminum (black-anodized) (fully assembled)/ 3mm screw pin (2)

269,-

299,-

KJØP
-10%
  Traxxas 8422-BLK Fire extinguisher, black (2) Pair of black replica fire extinguishers with decals. Replacement part for these models: TRX-4® Sport High Trail Edition™ Accessory part for these models: TRX-4® 1972 Chevrolet® Blazer® High Trail Edition™ TRX-4® 1979 Chevrolet® Blazer® TRX-4® 1979 Ford® Bronco® TRX-4® Chevrolet® K10 High Trail Edition™ TRX-4® Equipped with Traxx® TRX-4® Ford® Bronco® TRX-4® Ford® F-150® High Trail Edition™ TRX-4® Sport Unassembled Kit TRX-4® Sport

45,-

KJØP
  Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 14AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med Traxxas-ID3 til XT60-plugger. Benyttes for lading av batterier med Traxxas ID3-plugg, og kobles rett i ladere med XT60 tilkobling. Spesifikasjoner   Ledning 14AWG Lengde 30cm Tilkobling 1 XT60 Tilkobling 2 Traxxas ID3

125,-

KJØP
Wheel hubs, hex, steel (4) Steel hex wheel hubs fit with greater precision and deliver slip-proof performance with their splined-hex design. Sold as a set of four.

159,-

KJØP
This is the Traxxas Power Cell 11.1V 5000mAh 25C 3S LiPo Battery.     FEATURES Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 12 gauge silicone jacketed wire   INCLUDES Traxxas Power Cell 11.1V 5000mAh 25C LiPo 3S Battery with High  Current Connector and Integrated Balance Plug   REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus,  LiPo charging bag   SPECIFICATIONS  Configuration: 3S1P  Continuous Discharge: 25C (125A)  Max Burst Rate: 50C (250A)  Watt Hours: 55.5  Charge Rate: 1C (5A)  Max Charge Rate: 2C (10A)  Dimensions: 6.1 x 1.02 x 1.7" (155 x 26 x 44mm)  Weight: 13.3oz (376g)   COMMENTS ALWAYS use a LiPo-approved Charger  ALWAYS use a LiPo Cell Balancer  NEVER Charge over 4.20V per cell  NEVER Charge at currents greater than 1C  NEVER Trickle Charge  NEVER allow to Discharge below 3.2V per cell  NEVER disassemble or modify pack wiring in any way or puncture cells  NEVER place on combustible materials or leave unattended during  charging  ALWAYS Charge in a fireproof location  ALWAYS set charger's output volts to match battery volts  ALWAYS keep out of reach of children

995,-

1.095,-

KJØP
-9%
  Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 14AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med Traxxas ID plugg for 4s LiPo til 4mm bananplugger. Benyttes for lading av batterier med Traxxas ID-plugg, og kobles rett i ladere med 4mm tilkobling. Spesifikasjoner   Ledning 14AWG Lengde 30cm Tilkobling 1 4mm Banan Tilkobling 2 Traxxas ID 4s

159,-

KJØP
Toe links, front, Unlimited Desert Racer® (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (102mm) (2) (assembled with rod ends and hollow balls)/ aluminum wrench, 7mm (1)

499,-

KJØP
These are the Traxxas Flathead 3 x 8mm Screws. FEATURES: Metal construction           Black in color INCLUDES: Six 3 x 8mm Flathead Hex Screws REQUIRES: Installation on the vehicle

35,-

Ikke på lager
This is a quantity of six 2.6x5mm Screws for the Traxxas Aton Quadcopter.     FEATURES Steel construction, black in color  Used on the Aton to attach circuit board to main frame  May also be used in any application a screw this size is required   INCLUDES Six 2.6x5mm Screws   REQUIREMENTS 2mm Hex Wrench

19,-

KJØP
  Traxxas 5000mAh 14.8v 4-Cell 25C LiPo Battery TRAXXAS CERTIFIED LIPO POWER! Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available. Specs: Type: LiPo Total Capacity: 5000 mAh Voltage: 14.8 V (4S) C Rating: 25 Length: 155 mm Height: 34 mm Width: 45 mm Weight: 476 g   Accessory part for these models: Unlimited Desert  RacerX-Maxx

1.395,-

1.495,-

KJØP
-7%
  Sway bars (front & rear)

59,-

KJØP
Connector, 25.2 volt to 14.8 volt jumper (allows a Traxxas dual-battery 25.2 ESC to run on a single 14.8V battery pack)

79,-

KJØP
LED light bar, roof (curved, high-voltage) (52 white LEDs (single row), 202mm wide)

429,-

KJØP
2-in-1 wire harness, LED lights (high-voltage)

59,-

KJØP
Pre-Cut 1967 Ford F-100 Race Truck Clear Body for Unlimited Desert Racer This is a 1967 Ford® F-100 Race Truck Clear Body for the Unlimited Desert Racer®. The 1967 Ford® F-100 is a classic vintage truck that has recently become a popular platform for building full-size pre-runners. Pro-Line is proud to bring the nostalgic and majestic body lines of the 1967 Ford® F-100 to your Traxxas® UDR® for the ultimate in scale realism! This body features the iconic flat front grill and wide fender flares to represent the aggressive fiberglass bulges found on custom race trucks. The F-100 body comes clear so you can custom paint your truck to match anything your heart desires and is made from high quality, crystal clear polycarbonate material. Pro-Line's 1967 F-100 body mounts directly to the cage on the UDR® in the same locations as the stock body and is fully pre-cut for an easy direct fit. Transform the look of your Unlimited Desert Racer® and even more scale realism with the fully licensed 1967 Ford® F-100 Race Truck Body from Pro-Line! Features: Licensed 1967 Ford® F-100 Scale Looks Race Truck Style Wide Fender Flares Perfect fit for your Unlimited Desert Racer® Fully Pre-cut to Save you Time Detailed Graphics Included Made with Crystal Clear Polycarbonate Four steps to Race Ready: 1.) Clean Body completely 2.) Paint then peel the over-spray film off 3.) Sticker your body (decal sheet included) 4.) Mount your new body onto your truck Included: Pre-Cut 1967 Ford® F-100 Race Truck Clear Body (1 pc) Detailed Decal Sheets Fits: Unlimited Desert Racer® Specs: Length:   26.3" (668mm) Width at doors:   11.5" (292mm) Width at fenders:   13.3" (338mm) Height:   7.6" (193mm) Wheelbase:   16.5" (419mm)

1.095,-

1.195,-

KJØP
-8%
IDLER SHAFT SET - BLIZZARD SR and 2.0 and Trail KIng.

189,-

KJØP
Yeah Racing 20kg Waterproof Super Torque Digital Servo Red For 1/10 Crawler Buggy Description: Servo with specific software tune to make it as best as possible for crawlers! Fully waterproof means you can take it anywhere and not worry about it!   Features: For: Crawler / Buggy Material: Plastic Case with Aluminum Heatsink Color: Red   Specifications: Torque(4.8V): 16.5 kg-cm (229.1 oz/in) Torque(6.6V): 20.0 kg-cm (277.7 oz/in) Spline : 25T Speed: 0.18 sec (4.8V) ¢x 0.16 sec (6.6V) Operating Voltage¡G4.8 ~ 6.6 DC Volts Weight: 60 g (2.12 oz) Bearing Type¡GBall Bearing x 2 Motor Type¡GDC Motor Gear Type¡GCopper & Aluminum Operating Temperature¡G-20¢J~60¢J Working frequence¡G1520£gs / 333hz Size¡G40.7 x 20.5 x 39.5 mm ( 1.60 x 0.80 x 1.55 in)   Includes: Waterproof Super Torque Digital Servo (1 pc) Accessories (1 Set)

479,-

519,-

KJØP
-8%
STEEL PINION GEAR SET 13T - BLIZZARD SR (2)

249,-

KJØP
Bumper, front/ bumper support

75,-

KJØP
This is the CC BEC 10A Receiver Battery Eliminator by Castle Creations. FEATURES: Eliminates the need for a receiver and servo battery pack           Draws higher voltage from the motor batteries and drops it to a             voltage level suitable for the receiver and servos INCLUDES: One CC BEC receiver battery eliminator REQUIRES: Installation in the aircraft SPECS:    Length: 1.2" (30mm)           Width:   .6" (15mm)           Height:  .4" (10mm)           Weight:  .4oz (11g)           Input voltage: 5V to 25.2V (2S to 6S LiPo)           Current output: 12 volts input = 7 amps* continuous, 10 amp peak;             24 volts input = 5 amps* continuous, 7 amp peak             *Ratings are determined with a 5mph airflow on the BEC           Selectable Output: 4.8 - 9.0V via the Castle Link (sold separately)             Default voltage is 5.1V

399,-

449,-

KJØP
-11%
This new spray paint for clear polycarbonate bodies is designed for the 1/10 R/C Toyota 86 R/C car. It contains fine metallic particles to accurately recreate the unique orange paint finish on a polycarbonate body.   FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

99,-

119,-

KJØP
-17%
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-31 Smoke).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
Limit strap, rear suspension (2)/ 3x8 flathead screw (4)

49,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png