Hopp til innhold

Traxxas 8334 Suspension Arm Mounts Front and Rear (set)

Art.nr: TRX 8334

49,-

Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Mounts, suspension arms (front & rear)/ hinge pin retainers (4)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Utgått fra Traxxas. Erstattet med følgende vare: 10780X   Traxxas 10780 - Differential assembly (bevel gear), front or rear, complete (fits Mini Maxx®)

399,-

Ikke på lager
VAPEX LiPo-Safe Storage Bag-E 260x130x150mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. Features: Perfect storage bag for most RC batteries Zipper Flap/Top Bag-A, B, C & D fits inside it Size: 260x130x150mm We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended! Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

169,-

189,-

KJØP
-11%
Gear, 20-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

KJØP
Suspension pin set, complete (front & rear)

65,-

KJØP
  Steering Block (2)

49,-

KJØP
Caster blocks (c-hubs) (2)/ kingpin bushings (4)

49,-

KJØP
Shock towers, front & rear

49,-

KJØP
Chassis brace (front)

65,-

KJØP
Drive cups, inner (2) (steel constant-velocity driveshafts)/ screw pins (2)

169,-

KJØP
  Bulkhead Front

99,-

KJØP
Suspension arms, rear (left & right)

99,-

KJØP
  Bulkhead Rear

99,-

KJØP
Carriers, stub axle (left & right)

49,-

KJØP
Servo saver/ servo saver spring/ servo horn, steering

99,-

KJØP
  Motor Plate

39,-

KJØP
Gear, 29-T pinion (48-pitch)/ set screw

39,-

49,-

KJØP
-20%
Sway bar kit, 4-Tec 2.0 (front and rear) (includes front and rear sway bars and adjustable linkage)

309,-

KJØP
Yeah Racing Shock-Gear 55mm Damper Set for 1/10 RC Touring Car Blue   Description: This is a Yeah Racing newly designed damper set for 1/10 RC cars. Despite the 5 stage stiffness spring sets, Yeah racing damper set featured the state of the art technology interchangeable damper piston which gives so much serious tuner so much potential to tune their damper settings. The interchangeable piston will allow 3 settings of damper's response as well as 4 rebound rate adjustment to fit different racing situation and maximum performance. The Yeah Racing new damper set has spent great effort on increasing the durability and maintenance ease. The damper shaft is coated with titanium for extra reducing friction and longer lifespan. To cope with the need to change the damper piston from time to time, the shock gear have selected premium quality anti-leak O-Ring to keep the damper oil in place. CNC machined high grade aluminum were used to build this high end damper set for maximum durability at the minimum weight. Rebound Core System: The Yeah Racing Aluminum damper set comes with 6 different damper piston for fine-tuning the rebound characteristics. The set of 3 general type piston allow you to adjust 3 different rebound rate where has the same depression and compression resistant. While the "V piston" featured a v shape damper oil tunnel which allows the compression rate differ from the compression rate for more precise tuning. For instance, a rear wheel drive RC can be benefit by a stiffer rear wheel compression rate to offset the weight transfer during hard acceleration while maintaining balanced depression rate throughout the whole car.   Feature: For: 1/10 RC Cars Material: Aluminum Color: Blue CNC Machined Titanium Coated Damper Shafts Selected Anti-Leak O-Ring Unique Piston Design Rebound Core System Aluminum Damper Cylinder Easy To Refill Damper Oil Simple Installation   Include: Shcok-Gear (4 pcs) Piston 2 Holes (4 pcs) Piston 3 Holes (4 pcs) Piston 4 Holes (4 pcs) V Piston 2 Holes (4 pcs) V Piston 3 Holes (4 pcs) V Piston 4 Holes (4 pcs) Spring (Super Soft) (4 pcs) Spring (Soft) (4 pcs) Spring (Medium) (4 pcs) Spring (Hard) (4 pcs) Spring (Super Hard) (4 pcs) Ball End (8 pcs) Ball Nut (4 pcs) Shock Oil 300CST 15ml (1 pc) Manual (1 pc)     Manual:      

399,-

429,-

KJØP
-7%
Wheel hubs, splined, 17mm (orange-anodized) (4)/ 4x5mm GS (4)/ 3x14mm pin (4) Set of four 17 mm orange-anodized aluminum wheel hubs combine high-profile looks with superior strength. The special splined design locks into Traxxas splined wheels for precise alignment and unsurpassed grip. Includes 4x5 mm grub screws (4), and 3x14 mm pins (4). PLEASE NOTE: Maxx models require 8950X (standard width) or 8996X (WideMaxx®) Steel constant-velocity

239,-

259,-

KJØP
-8%
Gear, 22-T pinion (48-pitch) / with set screw

39,-

KJØP
  Body Washers Foam

29,-

KJØP
KJØP
This is the Ring Gear and Differential/Pinion Gear for the LaTrax Teton Monster Truck from Traxxas. FEATURES Steel construction INCLUDES Ring Gear Differential/Pinion Gear

69,-

79,-

KJØP
-13%
Suspension arms, front (left & right)

99,-

KJØP
Bumper, front (1 each, upper & lower)

65,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png