Traxxas

Traxxas 8235 Bumper Front TRX-4

Art.nr: TRX 8235

99,-

Traxxas

Traxxas

På lager: 1

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Bumper Front TRX-4

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

Hovedbilde

"Bulk" Traxxas 8235 Bumper Front TRX-4

Art.nr: BULK TRX 8235

Copied

*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "Bulk" Traxxas 8235 Bumper Front TRX-4 Bumper Front TRX-4

99,-

Kunder kjøpte også

Hovedbilde Traxxas 2872X LiPo 3S 11.1V 5000mAh 25C w/iD Connector

Traxxas 2872X LiPo 3S 11.1V 5000mAh 25C w/iD Connector

This is the Traxxas Power Cell 11.1V 5000mAh 25C 3S LiPo Battery. FEATURES Semi rigid construction does not require a hard case and eliminates wire harness connectors that can loosen and fail Engineered specifically to fit Traxxas models New high current connector with gold-plated copper terminals and integrated balance connector iD Auto Battery Identification allows Traxxas iD equipped chargers to automatically set and optimize charge settings for specific battery MAXX cable high-efficiency 12 gauge silicone jacketed wire INCLUDES Traxxas Power Cell 11.1V 5000mAh 25C LiPo 3S Battery with High Current Connector and Integrated Balance Plug REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus, LiPo charging bag SPECIFICATIONS Configuration: 3S1P Continuous Discharge: 25C (125A) Max Burst Rate: 50C (250A) Watt Hours: 55.5 Charge Rate: 1C (5A) Max Charge Rate: 2C (10A) Dimensions: 6.1 x 1.02 x 1.7" (155 x 26 x 44mm) Weight: 13.3oz (376g) COMMENTS ALWAYS use a LiPo-approved Charger ALWAYS use a LiPo Cell Balancer NEVER Charge over 4.20V per cell NEVER Charge at currents greater than 1C NEVER Trickle Charge NEVER allow to Discharge below 3.2V per cell NEVER disassemble or modify pack wiring in any way or puncture cells NEVER place on combustible materials or leave unattended during charging ALWAYS Charge in a fireproof location ALWAYS set charger's output volts to match battery volts ALWAYS keep out of reach of children

995,-

1.095,-

-9%

Hovedbilde Traxxas 9527R Tie-Bars Front Alu Red Sledge

Traxxas 9527R Tie-Bars Front Alu Red Sledge

Tie-Bars Front Alu Red Sledge Tie bars, front, 6061-T6 aluminum (red-anodized) Give your Sledge® a bold new look with these brightly-anodized 6061-T6 aluminum front tie bars.

179,-

189,-

-5%

Hovedbilde Traxxas 9541 Suspension Pins Inner F+R 4x67mm (2) ...

Traxxas 9541 Suspension Pins Inner F+R 4x67mm (2) ...

Traxxas 9541 Suspension Pins Inner F+R 4x67mm (2) Sledge Suspension pins, inner, front or rear, 4x67mm (hardened steel) (2)

59,-

Hovedbilde Traxxas 9531X Suspension Arm Front Left Blue Sledge

Traxxas 9531X Suspension Arm Front Left Blue Sledge

Traxxas 9531X Suspension Arm Front Left Blue Sledge Suspension arm, front (left), blue

149,-

159,-

-6%

Hovedbilde Traxxas 9530X Suspension Arm Front Right Blue Sledge

Traxxas 9530X Suspension Arm Front Right Blue Sledge

Traxxas 9530X Suspension Arm Front Right Blue Sledge Suspension arm, front (right), blue

139,-

Hovedbilde Traxxas 9559 Boots Driveshaft (2) Sledge

Traxxas 9559 Boots Driveshaft (2) Sledge

Traxxas Boots Driveshaft (2) Sledge Boots, driveshaft (2)/ retainer (assembled) (2)

109,-

Hovedbilde Traxxas 8255A Stub axle, extended (portal drive) (2)

Traxxas 8255A Stub axle, extended (portal drive) (2)

Stub axle, extended (portal drive) (2) These stub axles have extended threads for use on wheels with center caps.

85,-

Hovedbilde Traxxas 8253 Portal Drive Housing Inner Rear ...

Traxxas 8253 Portal Drive Housing Inner Rear ...

Portal drive housing, inner, rear (left or right) (2)

49,-

Hovedbilde Traxxas 8251 Portal Drive Housing Outer Front/Rear (2)

Traxxas 8251 Portal Drive Housing Outer Front/Rear (2)

Portal drive housing, outer (front or rear) (2)

49,-

Hovedbilde Traxxas 8258 Portal Drive Output Gear Front/Rear TRX-4

Traxxas 8258 Portal Drive Output Gear Front/Rear TRX-4

Portal Drive Output Gear Front/Rear TRX-4

65,-

Hovedbilde Traxxas 8269 Wheel Hubs Steel 12mm Hex (2) TRX-4

Traxxas 8269 Wheel Hubs Steel 12mm Hex (2) TRX-4

Wheel hubs, 12mm hex (2)/ stub axle pins (2) (steel) (fits TRX-4)

59,-

Hovedbilde Traxxas 3934A Body Clips Heavy Duty Black (12)

Traxxas 3934A Body Clips Heavy Duty Black (12)

Body clips, heavy duty (black) (12)

39,-

49,-

-20%

Hovedbilde Traxxas 8272 Tires & Wheels Canyon Trail 1.9

Traxxas 8272 Tires & Wheels Canyon Trail 1.9" (2)

Tires and wheels, assembled, glued (TRX-4 wheels, Canyon Trail 1.9 tires) (2)

439,-

469,-

-6%

Hovedbilde Yeah Racing YB6006B/S10 RC PTFE Bearing (3x7x3mm) ...

Hovedbilde Yeah Racing YB6006B/S10 RC PTFE Bearing (3x7x3mm) ...

Yeah Racing YB6006B/S10 RC PTFE Bearing (3x7x3mm) ...

Yeah Racing RC PTFE Bearing (3x7x3mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specifications: Yeah Racing (#YB6006B/S10) Telfon Bearing (3x7x3mm) Material: Metal Includes: Bearing (10Pcs) Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

89,-

99,-

-10%

Hovedbilde Traxxas 7111 Clear Body 1/16 E-Revo VXL

Traxxas 7111 Clear Body 1/16 E-Revo VXL

This is the Clear Body for use on the Traxxas 1/16 E-Revo VXL 4WD Brushless RTR. FEATURES: Plastic construction Clear INCLUDES: One Clear 1/16 E-Revo Body One Window Masking Set One Decal Set REQUIRES: Polycarbonate paint of modeler's choice Installation on the vehicle SPECS: Length: 283mm (11.1") Width: 100mm (3.9") Height: 75mm (3") (B5)

239,-

259,-

-8%

Hovedbilde Pro-Line 342000 2013 Ram 1500 True Scale Clear Body

Hovedbilde Pro-Line 342000 2013 Ram 1500 True Scale Clear Body

Pro-Line 342000 2013 Ram 1500 True Scale Clear Body

This is the Pro-Line 2013 Ram 1500 Clear Pickup Truck True Scale Body. FEATURES Fits the Traxxas Slash, Slash 4x4, Team Associated SC10 2WD, and the Pro-Line PRO-2 SC (the Traxxas and Team Associated vehicles require an Extended Body Mount Kit) Slash 4x4 Slash 2wd Molded from clear GE lexan Recreates the look of a full size lifted truck INCLUDES 2013 Ram 1500 Clear Pickup Truck True Scale Body with Window Masks and Decal Sheet REQUIREMENTS #6070-00 Extended Body Mount Kit for Traxxas Slash #6087-00 Extended Body Mount Kit for Traxxas Slash 4x4 #6071-00 Extended Body Mount Kit for Associated SC10 2WD Body Scissors and Reamer Lexan safe spray or brush-on paint SPECIFICATIONS Length: 21.25" (540mm) Width: 11.75" (299mm) Height: 6.15" (157mm) Wheelbase: 12.7" (323mm) (B3)

549,-

569,-

-4%

Hovedbilde Traxxas 7793X Housing, cush drive (front & rear ...

Traxxas 7793X Housing, cush drive (front & rear ...

Housing, cush drive (front & rear halves)

39,-

49,-

-20%

Hovedbilde Traxxas 6465 Cush drive key/ pin/ elastomer damper

Traxxas 6465 Cush drive key/ pin/ elastomer damper

Cush drive key/ pin/ elastomer damper

39,-

Hovedbilde Yeah Racing YB6009B/S10 RC PTFE Bearing (4x8x3mm) ...

Yeah Racing YB6009B/S10 RC PTFE Bearing (4x8x3mm) ...

Yeah Racing RC PTFE Bearing (4x8x3mm) 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6009BS/10) RC Telfon Bearing (4x8x3mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

69,-

Hovedbilde Yeah racing YBS-0017 Steel Bearing Set (14pcs) For ...

Hovedbilde Yeah racing YBS-0017 Steel Bearing Set (14pcs) For ...

Yeah racing YBS-0017 Steel Bearing Set (14pcs) For ...

Steel Bearing Set (14pcs) For Kyosho Ultima Replace or upgrade to a fullset of bearings for your car for a smoother and more efficient running car! No more looking up all the sizes you need and potentially getting the wrong ones with these custom sets for specific cars! Features: For : Kyosho Ultima Material : Steel Shielding: Rubber Specifications: YB6009 (4x8x3mm) (6pcs) YB6013 (5x10x4mm) (6pcs) YB6023 (10x15x4mm) (2pcs) Includes: Total Bearing (14 Pcs)

89,-

99,-

-10%

Hovedbilde Yeah Racing YB6020B/S10 RC PTFE Bearing (8x12x3.5mm) ...

Yeah Racing YB6020B/S10 RC PTFE Bearing (8x12x3.5mm) ...

Yeah Racing RC PTFE Bearing (8x12x3.5mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specifications: Yeah Racing (#YB6020BS/10) RC Telfon Bearing (8x12x3.5mm) Material: Metal Includes: Bearing (10Pcs) Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

89,-

99,-

-10%

Hovedbilde Yeah Racing YBS-0037 STEEL BEARING SET (20PCS) FOR ...

Hovedbilde Yeah Racing YBS-0037 STEEL BEARING SET (20PCS) FOR ...

Yeah Racing YBS-0037 STEEL BEARING SET (20PCS) FOR ...

Replace or upgrade to a fullset of bearings for your car for a smoother and more efficient running car! No more looking up all the sizes you need and potentially getting the wrong ones with these custom sets for specific cars! Feature: For : Traxxas 1/10 4-Tec 2.0 3.0 Material : Steel Shielding: Rubber Specification: YB6011B (5x8x2.5mm) (2 pcs) YB6014B (5x11x4mm) (9 pcs) YB6015B (6x10x3mm) (2 pcs) YB6020B (8x12x3.5mm) (1 pc) YB6022B (8x16x5mm) (2 pcs) YB6023B (10x15x4mm) (2 pcs) YB6026B (12x18x4mm) (2 pcs) Include: Total Bearing (20 pcs)

179,-

Hovedbilde Proline 1/10 Volkswagen Drag Bug Clear Body: Drag Car

Hovedbilde Proline 1/10 Volkswagen Drag Bug Clear Body: Drag Car

Proline 1/10 Volkswagen Drag Bug Clear Body: Drag Car

1/10 Volkswagen Drag Bug Clear Body: Drag Car Key Features Designed from the ground up to mimic full-size bugs Iconic Bug body shape, rounded fender flares, rear engine detail and a large rear spoiler. Made from Durable/Genuine .040 Polycarbonate In The Box (1) Volkswagen Drag Bug Clear Body and Spoiler (1) Rear Spoiler Hardware (1) Detailed Decal Sheet (1) Window Masks Fits: Losi® 22S™ No Prep Drag Car (requires trimming) Slash® 2wd Modified into a narrow Pro-Mod Drag Car (See video above for details) AE DR10 Product Specifications Manufacturer # 3558-00 Body Style 2 door coupe Material Polycarbonate Product Height 6.2" (157 mm) Product Length 20.5" (521 mm) Product Width 11" (279 mm) Refinement Color Clear Scale 1/10 Vehicle Type Drag Car Wheelbase 13.1" (333 mm) Here is the list of modifications needed to fit the Drag Bug on your Slash® 2wd: Pro-Line Extended Body Mounts for Slash® 2wd Traxxas® Bandit® Front Arms - #2531X Traxxas® Bandit® Rear Arms - #2750R Traxxas® Bandit® Front Caster Blocks - #2432 Traxxas® Bandit® Steering Blocks - #3636 Traxxas® Bandit® Axles - #2437 Traxxas® King Pins - #3740 Traxxas® Front Camber Turnbuckles - #2444 Traxxas® Rear Turnbuckles - #2443 Traxxas® Toe Link Turnbuckles - #2445 Shorten Rear Drive Shafts Remove Front Bumper

495,-

695,-

-29%

Hovedbilde Yeah Racing YB6021B/S10 RC PTFE Bearing (8x14x4mm) ...

Hovedbilde Yeah Racing YB6021B/S10 RC PTFE Bearing (8x14x4mm) ...

Yeah Racing YB6021B/S10 RC PTFE Bearing (8x14x4mm) ...

RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by High quality steel. Pre-lubricated to ensure its excellent performance! Feature: Material: Bearing Steel Shielding: Rubber Specification: 8x14x4mm Include: Bearing (10 pcs)

79,-

89,-

-11%

Hovedbilde Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ...

Hovedbilde Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ...

Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ...

Yeah Racing RC PTFE Bearing (5x10x4mm) 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6013BS/10) RC Telfon Bearing (5x10x4mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

79,-

89,-

-11%