Hopp til innhold
-6%

Traxxas 8195 Differential Locking Set Complete

Art.nr: TRX 8195

1.695,-

1.795,-

- 6%
Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Differential Locking Set Complete

Differential, locking, front and rear (assembled) (includes T-Lock cables and servo)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

High-Torque 330 Blue Servo The Traxxas High-Torque 330 Blue servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A powerful coreless motor provides 330 ounce-inches of torque for the most demanding applications.* The High-Torque 330 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit. The Power to Perform With over 3 times more torque than the standard TRX 2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single TRX 2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo.     For TRX-4 Installation The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit TRX 2262 and a steel servo horn TRX 8247X is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits.   Waterproof Not "Water Resistant" Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines.           HIGH-TORQUE 400 RED FEATURES Factory fit for drop-in installation into Traxxas Models Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management™ (TSM) 400 oz-in torque Metal gears Dual ball bearings Brushless motor technology Aluminum center case       SPECIFICATIONS Motor Type:   Brushless Operating Voltage:   6.0 - 7.4V DC Speed:   0.15 sec/60° Weight:   64g Gears:   Metal Output Spline:   25T Case:   Plastic top/bottom, anodized aluminum center Controller:   Digital   APPLICATION GUIDE   Compatible with most Traxxas 1/10 scale electric models* Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn Compatible with Traxxas nitro models using rechargeable 5-cell battery packs Not recommended for X-Maxx     High-Torque Blue 330 Waterproof Metal-Gear Coreless Digital Servo For the ultimate experience in precision steering authority, two new high-torque metal gear waterproof servos are available from Traxxas. Traxxas high-torque servos are designed for a factory fit in 1/10 Traxxas vehicles and both servos feature full metal gears, dual ball bearings, and waterproof cases with aluminum center sections for added heat dissipation. Both servos are designed to work flawlessly with Traxxas Stability Management for laying down maximum power on any surface. The High-Torque Blue 330 is powered by a coreless motor for 24 kg/cm of torque and 0.19 transit time. For optimum control and responsiveness, the High-Torque Red 400 uses brushless motor technology for a massive 29 kg/cm of torque and 0.15 transit time.   Factory fit for drop-in installation into Traxxas models Waterproof 24 kg-cm of torque and 0.19 transit time Metal gears Dual ball bearings Coreless motor technology Aluminum center case SPECIFICATIONS: Motor Type: Coreless Operating Voltage: 6.0-7.4V Torque: 24 kg/cm @ 6.0V Speed: 0.19 sec/60° @ 6.0V Weight: 64g Gears: Metal Output Spline: 25T Case: Plastic top/bottom, anodized aluminum center Controller: Digital

895,-

995,-

KJØP
-10%
Features: Viscosity 100CPS / 10WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. ●Scope of delivery : 1 bottle /60ml

79,-

KJØP
Traxxas 20WT/200cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, the twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap    Specs: Viscosity: 20WT (200cSt) Bottle size: 60ml

99,-

109,-

KJØP
-9%
Yeah Racing 100mm Desert Lizard Two Stage Internal Spring Damper Pair Red For Crawler Description: Introducing the Yeah Racing Desert Lizard internal spring shock for crawlers, comes pre-assembled for easy upgrading your current rig! Comes with a full set of springs and machined pistons for you to setup your rig for all sorts of different conditions! Included are springs for you to build either a droop or a sprung setup, a sprung setup will create a rig which will generate a lot of flex and more suspension travel. For the droop setup, your rig will sit lower and because of a spring under the piston, will be less prone to rolling over but will generate less flex. Featuring a triple O-Ring sealing cartridge which will prevent shock oil leakage! *Photos for reference only. Feature: For: HPI Crawler King / Gmade R1 KOMODO / Vaterra K5 / AXIAL SCX10 / RC Crawlers Material: Aluminum Normal length : 100mm Compressed length : 78mm Stretch length : 110mm Include: Yeah Racing 100mm Desert Lizard Two Stage Internal Spring Damper (2 pcs) Springs (16 pcs) Pistons (8 pcs) Mounting Hardware (1 pack) Manual:

349,-

399,-

KJØP
-13%
  TRX-4 Sport LED LIGHT KIT (#8085) Genuine Traxxas LED light kits for the TRX-4 Sport are engineered with the same outstanding quality and attention to detail as the truck itself. Precise Traxxas fit and finish makes installation easy and fun for any skill level, and the waterproof design allows for all-weather adventure after the sun goes down. An injection molded grill and tailgate with integrated lenses adds scale detail and rugged functionality. FEATURES: Sealed waterproof design Engineered by Traxxas for direct fit on the TRX-4 Sport body with tidy and secure wire management Color-coded power distribution block for easy and secure connections Includes front grill and rear tailgate with integrated lenses Traxxas LED lighting module: Regulated to provide consistent and reliable power output with batteries from NiMH to 3S LiPo Eliminates overheating, glitching, and other electronics issues common with unmatched aftermarket systems #8085 Kit Contents: LED lighting module Distribution block Front grill Front grill retainer Headlights harness assembly Headlight clamps (2) Tailgate panel Tailgate panel retainer Tail lights harness assembly Tail light clamps (2) 2.5x8mm button-head screws (8) 2.6x8mm button-head screws (2) 2.5x10mm button-head screws (2) 2.5x15mm cap screws (2) Zip tie mount (3) Zip ties (3) Body templates

739,-

769,-

KJØP
-4%
LED light bar, roof lights (fits #8111 body, requires #8028 power supply) #8087 Kit Contents (parts #8120 or #8120X required, sold separately): LED roof light bar 2.5x8mm cap screws (2) Zip tie mount (1) Zip tie (1)

259,-

KJØP
Yeah Racing RC PTFE Bearing Set with Bearing Oil For Traxxas TRX-4 (Ver.2) Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision *Now comes with bearing oil for maintaining bearings in long run. (This new bearing set (with bearing oil) will replace the old item.)   Specifications: Material: Steel Shielding: Rubber   Includes: Bearing (40 Pcs) -4X10X4(4pcs) -5X8X2.5(3pcs) -5X10X4(1pc) -5X11X4(12pcs) -6X12X4(4pcs) -6X13X5(6pcs) -10X15X4(4pcs) -12X18X4(2pcs) -7x14x5(2pcs) (ver.2) -15x21x4mm(2pcs) (ver.2) Bearing Oil (15ml) #YA-0215(1pc)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable.

329,-

349,-

KJØP
-6%
Gear, 11-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

69,-

KJØP
Alloy Diff Cover (Titanium Coated) For Traxxas TRX-4 Black   Description: Alloy diff cover with titanium coating for Traxxas's TRX-4. Perfect match with the alloy axles which are also titanium coated by yeah racing.     *Photos for reference only.   Feature: For: Traxxas TRX-4 Material: Alloy Color: Black   Include: Alloy Diff Cover (1 pc)

129,-

149,-

KJØP
-13%
FlySky FS-GT5 – 6-kanals radio med gyro og mottaker Avansert 6-kanals radiosystem med gyrostabilisering, 20 modellminner og egne funksjoner for crawler! FlySky FS-GT5 er en allsidig og brukervennlig 6-kanals fjernkontroll for RC-biler og båter. Med innebygd gyrostabilisering i den medfølgende FS-BS6-mottakeren får du bedre kontroll og stabilitet, spesielt ved høy hastighet eller kjøring på glatt underlag. Radioen passer både nybegynnere og erfarne RC-entusiaster som ønsker mange funksjoner til en fornuftig pris. Innebygd gyro – bedre stabilitet og kontroll Den medfølgende FlySky FS-BS6-mottakeren har innebygd gyro med SVC (Smart Vehicle Control). Gyroen registrerer uønskede bevegelser og korrigerer styringen automatisk for å hjelpe bilen med å holde ønsket kjøreretning. Dette er spesielt nyttig på løst underlag, ved akselerasjon og under kjøring i høy hastighet. Gyrofunksjonen kan justeres eller deaktiveres etter behov. 20 modellminner – én radio til flere RC-biler FS-GT5 har minne for opptil 20 forskjellige modeller. Du kan lagre individuelle innstillinger for hver bil og enkelt bytte mellom dem uten å måtte programmere radioen på nytt. Spesielle funksjoner for RC-crawlere FS-GT5 har fire forskjellige crawler-moduser som gjør den spesielt interessant for biler med firehjulsstyring. Dette gir mulighet for forskjellige styreoppsett, inkludert styring med både for- og bakhjul. Viktige egenskaper 6 kanaler – mulighet for ekstra funksjoner og tilbehør Innebygd gyro i mottakeren – forbedret retningsstabilitet 20 modellminner – lagre innstillinger for flere RC-modeller 4 crawler-moduser – tilpasset blant annet firehjulsstyring 2,4 GHz AFHDS 2A – stabil og pålitelig radiokommunikasjon LCD-skjerm med bakgrunnsbelysning – enkel tilgang til innstillinger Justerbar styring og gass – EPA, Dual Rate, Expo og Trim Failsafe – programmerbar sikkerhetsfunksjon ved signaltap ABS-funksjon – justerbar bremsefunksjon Vibrasjonsvarsling – gir tilbakemelding fra radiosystemet Tekniske spesifikasjoner Egenskap Spesifikasjon Modell FlySky FS-GT5 Antall kanaler 6 Frekvens 2,4 GHz Protokoll AFHDS 2A Modellminne 20 modeller Mottaker FlySky FS-BS6 Gyro Ja, innebygd i mottakeren Rekkevidde Ca. 150–250 meter under gode forhold Strømforsyning sender 4 × AA-batterier Mottakerspenning 4,0–8,4 V Bruksområde RC-biler og RC-båter Pakken inneholder 1 × FlySky FS-GT5 6-kanals sender 1 × FlySky FS-BS6 6-kanals mottaker med gyro FlySky FS-GT5 er et godt valg for deg som ønsker en funksjonsrik radio med gyrostabilisering, crawler-funksjoner og muligheten til å styre flere RC-modeller med én og samme sender.     Product Features  FS GT5 Transmitter  Channels: 6 Channels  RF range: 2.408-2.475 GHz  Bandwidth: 500 KHz  Bands: 135  RF Power: <20dBm  Receiving Sensitivity: -95dBm  2.4 GHz protocol: AFHDS 2A  Modulation type: GFSK  Transfer method: FHSS  Channel resolution: 4096 steps  Channel delay: <15 msec  Batterry: AA batteries <4.4V, 2S lithium battery <7.4V (Not included)Antenna: 26mm  Display: NTN semi-pemeable, segment screen, VA52.5 x 34mm LCD white backlight  Online Update: N / A  Range:> 200 m (no ground disturbances)  channel data parameters: 1500us (median) 900-2100us (area)  FS-BS6 receiver  Item no: FS-BS6  Channels: 6CH  RF range: 2.408-2.475 GHz  RF channel: 135  RX sensitivity: -92dBm  2.4 GHz system: AFHDS 2A  Modulation type: GFSK  Power consumption: 4.0-8.4V DC  Dimension: 30* 22* 16mm  Weight:8g  -----------------------------------------  Package Including:  1 * Flysky FS-GT5 Transmitter  1 * Flysky FS BS6 Receiver  1 * Manual in English 

1.295,-

1.495,-

KJØP
-13%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png