Hopp til innhold

Traxxas 8077 Tailgate Panel Insert Clear

Art.nr: TRX 8077

109,-

Traxxas

Traxxas

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Tailgate panel insert (clear, requires painting)/ adhesive foam tape (2)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Mirrors, side, chrome (left & right)/ retainers (2)/ body clips (4) Fits Traxxas 8010 Body

85,-

KJØP
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-23 Gun Metal).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-12 Silver).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
Springs, shock (natural finish) (GTS) (0.39 rate, orange stripe) (2)

75,-

KJØP
Springs, shock (natural finish) (GTS) (0.30 rate, white stripe) (2)

75,-

KJØP
Bumper D-Rings, grey (front or rear)/ 2.0x12 CS (4)

39,-

KJØP
Bumper, rear (chrome)/ bumper mount/ 3x10 BCS (2)

129,-

KJØP
Battery plate/ battery strap/ 3x8 flathead screws (4) (requires #8072 inner fenders)

69,-

KJØP
Door handles, left & right/ windshield wipers, left & right/ retainers (3)/ 1.6x5 BCS (self-tapping) (4)

59,-

KJØP
Side trim, left & right (chrome)/ retainers/ LED lens/ 2.6x8 BCS (24)

229,-

KJØP
Tailgate panel/ tail light lens (2) (left & right)

145,-

KJØP
Grill, Ford Bronco/ grill retainers (3)/ headlight housing (2)/ lens (2) (fits #8010 body)

179,-

189,-

KJØP
-5%
Roof basket (requires #8016 ExoCage) (fits #8011 body)

169,-

KJØP
ExoCage (complete with assembly hardware; #8015 roof basket sold separately) (fits #8011 body)

239,-

KJØP
 Push bar, bumper (chrome) (fits #8069 bumper)

149,-

159,-

KJØP
-6%
  TRX-4 Bronco Light Kit - Ultimate Scale Looks and Rock-Solid Durability     The Traxxas TRX-4 Ford Bronco sets the standard for scale appearance out on the trail. The new LED Light Kit (#8035) takes scale realism to the next level with working headlights, tail lights, and side markers. Fully waterproof and built Traxxas-Tough, the LED light kit is ready for your wildest adventures. No matter where the trail leads, day or night, the TRX-4 Ford Bronco will blaze a trail. QUICK FEATURES ON TRX-4 BRONCO LED LIGHT KIT (#8035) Sealed waterproof design Precision-engineered for direct fit on the Bronco body Plug and play design with modular connectors Traxxas LED lighting module Regulated to provide consistent and reliable power output with batteries from NiMH to 3S LiPo Eliminates overheating, glitching, and other electronics issues common with unmatched aftermarket systems Clear headlight lenses with reflectors and amber turn signal lenses

789,-

Spare tire mount/ mounting bracket/ spare tire cover/ mounting hardware

189,-

199,-

KJØP
-5%
Chassis conversion kit, TRX-4 (short to long wheelbase) (includes rear upper & lower suspension links, front & rear shock towers, long female half shaft)

249,-

269,-

KJØP
-7%
High-Torque 400 Red Brushless Digital Servo The Traxxas High-Torque 400 Red servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A cutting edge brushless motor provides 400 ounce-inches of torque for extreme applications.* The High-Torque 400 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit. The Power to Perform With over 3 times more torque than the standard #2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single #2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo.   High-voltage BEC boosts receiver power for even the most demanding servos. BEC fits inside the extended receiver box for fully waterproof protection. Kit includes BEC, receiver box lid, Y-harness, and mounting hardware.   For TRX-4 Installation The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit #2262 and a steel servo horn #8247X is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits.   Waterproof Not "Water Resistant" Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines.   HIGH-TORQUE 400 RED FEATURES   Factory fit for drop-in installation into Traxxas Models Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management™ (TSM) 400 oz-in torque at 6.0V 0.15 sec/60° at 6.0V Metal gears Dual ball bearings Brushless motor technology Aluminum center case     SPECIFICATIONS Motor Type:   Brushless Operating Voltage:   6.0 - 7.4V DC Speed:   0.15 sec/60° at 6.0V Torque:   400 oz-in at 6.0V Weight:   64g Gears:   Metal Output Spline:   25T Case:   Plastic top/bottom, anodized aluminum center Controller:   Digital   APPLICATION GUIDE   Compatible with most Traxxas 1/10 scale electric models* Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn Compatible with Traxxas nitro models using rechargeable 5-cell battery packs Not recommended for X-Maxx       *Does not fit 4-Tec 2.0 models. Minor trimming may be required on 2WD Stampede vehicles.

1.095,-

1.195,-

KJØP
-8%
Diamond Plate Fender Covers for Traxxas TRX-4   Specifications: Stamped Diamond Plate Stainless Steel Total Length: 4.9in / 124.5mm Total Width: 2.95in / 75.0mm Weight: 0.39oz / 11g   What’s Included: 1x Diamond Plate Fender Covers for Traxxas TRX-4 14x Cross Head Cap Screws M1x3mm (Black) 14x Regular M1 Nuts (Silver)   Notes: Fits Traxxas TRX-4 You will need to hand mold the plates to your fenders. They come flat and are easy to shape into place. Please be careful as the plate may easily crease.

299,-

329,-

KJØP
-9%
5 Lug Deep Dish Wagon 1.9" Steel Stamped Beadlock Wheels (Plain) Specifications: Stamped Steel Wheels CNC Machined Parts Amazing Detail Fits Standard 12mm Hex Wheel Size: 1.9'' OD: 1.9in / 54.5mm Width: 1.26in / 32.1mm Center Hole OD: 0.16in / 4.0mm Negative Offset: 0.12in / 3.0mm Each Weight: 2.75oz / 78.0g   Shown installed with Krypton 1.9" Scale Tires for example (Not Included)   Shown installed with Krypton 1.9" Scale Tires and RC4WD Gelande II Truck Kit w/Cruiser Body Set (Z-K0054) for example (Not Included) Click image below to enlarge photo. What's Included: 4x 5 Lug Deep Dish Wagon 1.9" Steel Stamped Beadlock Wheels (Plain) 2x M2.5 x 14mm SHCS (Black) (Z-S1213) Optional Parts: 1.9"/2.2" 5 Lug Steel Wheel Hex Hub +6 Offset (Z-S1276) 1.9"/2.2" 5 Lug Steel Wheel Hex Hub +9 Offset (Z-S1278) 1.9" 5 Lug Steel Wheel Hex Hub (Z-S0734) RC4WD 12mm Axle Wheel Hexes (Z-S0239) RC4WD 12mm Axle Wheel Hexes (2 Way) (Z-S0238) Bully 2 12mm Front Axle Hex (Z-S0449) Narrow Stamped Steel Wheel Pin Mount 5-Lug for 1.9" Wheels (Z-S1941) Replacement Parts: 1.9"/2.2" 5 Lug Steel Wheel Hex Hub +3 Offset (Z-S1273) Replacement Hardware: 20x M2.5 x 10mm SHCS (Black) (Z-S1290) Notes: Due to many different methods to design Tires and Wheels, we have no control over other manufacturers products. So we can only tell you that RC4WD Tires and Wheels work together. In some cases our Wheels and Tires will work with other brand Wheels and Tires, but we can not guarantee the outcome.

849,-

899,-

KJØP
-6%
This is the 1/10 scale RC4WD Warn 8274 Winch.   FEATURES CNC machined billet and cast aluminum construction Working spring loaded Warn hook 3.28ft (1.0m) synthetic rope pre-installed Operates on 6-11.1V Officially licensed by Warn Can operate on 3 Cell LiPo   INCLUDES RC4WD 1/10 Warn 8274 Winch Four M2.5 x 4mm Socket Head Cap Screws Four M2.5 x 6mm Socket Head Cap Screws RC4WD Warn Winch Pull Tag Warn Decal Sheet Set   REQUIREMENTS Z-S1092  Wireless Remote/Receiver Winch Controller Set Z-S1089  Wired Winch Control Unit   SPECIFICATIONS Load Limits: Dead Lift 50lbs (22.6kgs) Load Limits: Rolling Drag 70lbs (31.7kgs) Winch Rope Load Limits: Dead Lift 25lbs (11.3kgs) Winch Rope Load Limits: Rolling Drag 37lbs (16.8kgs) Length: 1.40" (35.6mm) Width: 2.56" (65.0mm) Height: 1.77" (45.0mm) Weight: 3.28oz (93g)  

1.295,-

1.895,-

KJØP
-32%
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-38 Frost Blue).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.                                      

109,-

KJØP
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-43 Translucent Orange)                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 3.4oz (100ml) COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-44 Translucent Green).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 3.4oz (100ml) COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png