Traxxas

Traxxas 7770X Tire Maxx AT incl foam 8S Rated (2) X-Maxx

Art.nr: TRX 7770X

599,-

Traxxas

Traxxas

På lager: 2

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Tires, Maxx AT (left & right) (2)/ foam inserts (2)

X-Maxx Maxx AT 8.0x4.0" tires and foam inserts. Package includes (1) left and (1) right side tire.

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Hot Racing Steel Spur Gear 46t 1 Mod: X-Maxx Xo-1

Hovedbilde Hot Racing Steel Spur Gear 46t 1 Mod: X-Maxx Xo-1

Hot Racing Steel Spur Gear 46t 1 Mod: X-Maxx Xo-1

The Hot Racing hardened steel Mod 1 spur gear is an optional upgrade for the Traxxas E Revo 2.0, X-Maxx 6S and 8S, Maxx 4S and XO-1 models. Choose from 50, 52 and 54 tooth options. NOTE: Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 Adjusting Gear Mesh) With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them. Features: Specifications: Overall diameter: 52.8mm Gear face width: 8mm Includes: One (1) mod 1 steel spur gear CNC machined hardened steel construction Black oxide finished Laser etched tooth count marking Upgrade for factory plastic spur gear

639,-

Hovedbilde Traxxas 6494R Pinion Gear 20T 1.0M for 5mm Shaft ...

Traxxas 6494R Pinion Gear 20T 1.0M for 5mm Shaft ...

Traxxas 6494R Gear, 20-T pinion (machined, hardened steel) (1.0 metric pitch) (fits 5mm shaft)/ set screw

149,-

159,-

-6%

Traxxas 3362X Heat Sink Low Profile Velineon 1200XL

Traxxas 3362X Heat sink, low profile, Velineon® 1200XL Low-profile aluminum heat sink for the Velineon® 1200XL brushless motor. The heat sink covers nearly 75% of the motor can to draw more heat away. Replacement part for these models: XRT™

219,-

239,-

-8%

Hovedbilde Traxxas 3492 Rebuild Kit Motor Velineon 1200XL (3491)

Traxxas 3492 Rebuild Kit Motor Velineon 1200XL (3491)

Traxxas 3492 Rebuild Kit Motor Velineon 1200XL (3491) Rebuild kit, Velineon® 1200XL (includes plastic endbells (2), 6x17x6mm ball bearings (2), 6x8x.3 washer (1), 6x8x1 washer (1), 7x6x12 spacer (1))

169,-

Hovedbilde Traxxas 7760 Motor mounts set

Traxxas 7760 Motor mounts set

Motor mounts (front and rear)/ pins (2)

69,-

Hovedbilde Hot Racing Steel Spur Gear 54t 1 Mod: X-Maxx Xo-1

Hovedbilde Hot Racing Steel Spur Gear 54t 1 Mod: X-Maxx Xo-1

Hot Racing Steel Spur Gear 54t 1 Mod: X-Maxx Xo-1

The Hot Racing hardened steel Mod 1 spur gear is an optional upgrade for the Traxxas E Revo 2.0, X-Maxx 6S and 8S, Maxx 4S and XO-1 models. Choose from 50, 52 and 54 tooth options. NOTE: Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 Adjusting Gear Mesh) With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them. Features: Specifications: Overall diameter: 52.8mm Gear face width: 8mm Includes: One (1) mod 1 steel spur gear CNC machined hardened steel construction Black oxide finished Laser etched tooth count marking Upgrade for factory plastic spur gear

599,-

639,-

-6%

Hovedbilde Traxxas 3491 X-Maxx Velineon 1200XL 4-Pole Brushless ...

Traxxas 3491 X-Maxx Velineon 1200XL 4-Pole Brushless ...

Description: This is Traxxas X-Maxx Velineon 1200XL 4-Pole Brushless Motor. 1200KV Feature: For: Traxxas X-Maxx Material: Metal Color: Black Traxxas 6.5mm bullet connectors Include: Traxxas X-Maxx Velineon 1200XL 4-Pole Brushless Motor (1 pc)

2.695,-

2.895,-

-7%

Hovedbilde Traxxas 7836 Steering Blocks L&R (Pair) XRT, X-Maxx

Traxxas 7836 Steering Blocks L&R (Pair) XRT, X-Maxx

Steering Blocks L&R (Pair) XRT, X-Maxx Steering blocks, left & right These left and right steering blocks were redesigned and beefed-up for XRT™. Standard in XRT, they can be used to upgrade X-Maxx® for extreme duty and maximum strength. (Steering blocks require 5196A inner bearings)

99,-

109,-

-9%

Hovedbilde Traxxas 6447R Spur gear, 46-tooth, steel (wide-face, ...

Traxxas 6447R Spur gear, 46-tooth, steel (wide-face, ...

Spur gear, 46-tooth, steel (wide-face, 1.0 metric pitch)

219,-

Hovedbilde Traxxas 7721 Bulkhead Front Lower

Traxxas 7721 Bulkhead Front Lower

This is the Lower Front Bulkhead for the Traxxas X-Maxx Monster Truck FEATURES One-piece molded composite plastic construction Holds the steering, differential, skidplate and lower control arm assemblies INCLUDES Lower Front Bulkhead

169,-

179,-

-6%

Hovedbilde Traxxas 6468 Tire Glue TRX Ultra Premium

Hovedbilde Traxxas 6468 Tire Glue TRX Ultra Premium

Traxxas 6468 Tire Glue TRX Ultra Premium

Traxxas Ultra Premium Tire Glue Ultra Premium Tire Glue (#6468) with packageOnly one tire glue is certified for use with the 100+mph XO-1: Traxxas Ultra Premium Tire Glue. The XO-1 relies on a high-strength tire bond to withstand incredible centrifugal forces at speeds in excess of 100mph. No other glue endures such high loads, which makes Traxxas Ultra Premium Tire Glue the ultimate adhesive for any tire and rim combination (and any other application that requires a high-strength bond). To preserve the maximum bonding power of Traxxas Ultra Premium Tire Glue, its bottle is specially designed to maintain a tight seal and prevent clogging. The bottle and nozzle are made of glue-resistant material, and a pin integrated into the tightly-fitting screw-on cap assures glue won't clog the bottle tip. The tip's fine opening allows precise glue application every time you reach for Traxxas Ultra Premium Tire Glue. Traxxas Ultra Premium Tire Glue is custom-blended exclusively for Traxxas. There simply is no better bond for high-speed, high-power vehicles. Traxxas Ultra Premium Tire Glue Features: The only glue Traxxas Certified for the 100+mph XO-1 Highest-quality cyanoacrylate (CA) glue available Fine tip opening for precise glue application Tightly-fitting cap with sealing pin Glue-resistant bottle and tip material Includes two precision application tips Content 20gr

139,-

159,-

-13%

Hovedbilde Traxxas 9517 Wing Black Sledge

Hovedbilde Traxxas 9517 Wing Black Sledge

Traxxas 9517 Wing Black Sledge

Traxxas 9517 Wing Black Sledge Wing (black)/ wing washer / 4x12mm FCS (2)

199,-

Hovedbilde RPM 80552 Body Savers for TRX X-Maxx Bodies Works with ...

Hovedbilde RPM 80552 Body Savers for TRX X-Maxx Bodies Works with ...

RPM 80552 Body Savers for TRX X-Maxx Bodies Works with ...

RPM Body Savers for Traxxas X-Maxx Bodies Works with Traxxas #7711, #7711A & #7717G, #7711R & #7711X bodies Quick Notes: Works with new or damaged bodies Disguised for improved visual appeal Works with Traxxas #7711, #7711A & #7717G, #7711R & #7711X bodies The clipless body mounting system Traxxas uses on the X-Maxx is a handy system to have but it tends to have one fatal flaw – the mounting screw holes crack easily, rendering those expensive new bodies useless fairly quickly. If you’ve managed to pull any of your body mounting screws through the body or if you think it’s about to happen, we have the perfect solution to save you from ugly, thick body washers or worse, buying a new body. RPM Body Savers for the X-Maxx are a simple, yet clever solution to solve that problem. Out front, they look like molded hood vents (2) and A/C vents (2) while in the rear, they look like exposed sections of riveted metal (2). It’s a perfect way to camouflage their intended purpose and yet still keep the body firmly attached. The way they work is straightforward and twofold. Out front, they work similarly to oversized washers, yet have significantly more surface area than most washers, without detracting from the looks of your favorite ride. Out back, there are two pairs of screws holding the sub-frame of the body mounting system to the body. Our rear Body Savers tie two pairs of screws together, dispersing the pressure of holding the body to the sub-frame over a wide area of the body. Even if the bottom of the mounting holes in the body are completely ripped out from prior crashes, our system still works! RPM Body Savers are molded in black from our ultra strong, engineering grade nylons for unmatched performance and are sold with enough Body Savers to protect the entire vehicle. Tech Notes: RPM Body Savers are tested to work with Traxxas #7711, #7711A & #7717G, #7711R & #7711X bodies only. They have not been tested nor are they guaranteed to work with any other Traxxas or aftermarket bodies.

199,-

Hovedbilde Traxxas 9671 Wheels 3.8'' Black (17mm Hex ) (2)

Traxxas 9671 Wheels 3.8'' Black (17mm Hex ) (2)

Traxxas 9671 Wheels 3.8'' Black (17mm Hex ) (2) Wheels, 3.8" (black) (2) (17mm splined) Scale: 1/8 Size: 3,8 Inch Suit: Truck Drive: 17mm Hex

135,-

Hovedbilde Traxxas 9670 Tires Sledgehammer (17mm Sledge 1/8) ...

Traxxas 9670 Tires Sledgehammer (17mm Sledge 1/8) ...

Traxxas 9670 Tires Sledgehammer (17mm Sledge 1/8) 3.8'' (2)

399,-

Hovedbilde RPM 70510 Threaded Hinge Pins for X-Maxx Fits* stock ...

RPM 70510 Threaded Hinge Pins for X-Maxx Fits* stock ...

RPM Threaded Hinge Pins for X-Maxx Fits* stock Traxxas A-arms as well as RPM #82352, #82354 & #82355 Quick Notes: Manufactured from stainless steel Fits* stock Traxxas A-arms as well as RPM #82352, #82354 & #82355 Can be used in place of CEN #GS025* Works in the outer, lower a-arm hinge pin location only In response to customer demand, we’re proud to release a set of threaded hinge pins for the Traxxas X-Maxx. RPM Threaded Hinge Pins work with stock Traxxas A-arms as well as RPM A-arms, are manufactured from stainless steel and are tough as nails! If you’ve lost or damaged your stock hinge pins, or perhaps you’re tired of losing those tiny hinge pin retaining screws, give RPM threaded hinge pins a shot and never look back! Tech Notes: RPM Threaded Hinge Pins are 4mm x 56mm and work in the outer, lower A-arm hinge pin location only. Each kit comes with 4 – threaded hinge pins and 4 – M3 locknuts. Our hinge pins can be used as a replacement for CEN GS025 hinge pins as well but RPM versions use a 3mm locknut instead of a 4mm version. When used with the X-Maxx (using stock or RPM A-arms), some minor modification of the A-arms is required for the hinge pins to fit (see instructions for more information).

129,-

139,-

-7%

Hovedbilde Traxxas 5035 Silicon Shock Oil Premium 60WT (700cSt) ...

Hovedbilde Traxxas 5035 Silicon Shock Oil Premium 60WT (700cSt) ...

Traxxas 5035 Silicon Shock Oil Premium 60WT (700cSt) ...

Traxxas 60WT/700cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 60WT (700cSt) Bottle size: 60ml

99,-

109,-

-9%

Hovedbilde Traxxas 7817 Body Protection Roof Black X-Maxx

Traxxas 7817 Body Protection Roof Black X-Maxx

Traxxas X-Maxx Heavy-Duty Roof Skid - Black Skid plate, roof (body) (black)/ 3x15mm CS (4) (requires #7713X to mount) Just like our heavy-duty suspension arms, new X-Maxx roof skid plates use our toughest composite material. Whether you’re sending it at the skate park, or launching from a ramp, these parts are built with just the right amount of flex to resist breakage--even in cold weather! These important accessories protect the roof during rollovers.

129,-

139,-

-7%

Hovedbilde Onyx 2215 Adapter Male T-Plug to Female XT90

Onyx 2215 Adapter Male T-Plug to Female XT90

Onyx Adapter Male T-Plug to Female XT90

89,-

Hovedbilde Traxxas 2943 Battery Charge Indicators TRX-iD (4+4+4)

Hovedbilde Traxxas 2943 Battery Charge Indicators TRX-iD (4+4+4)

Traxxas 2943 Battery Charge Indicators TRX-iD (4+4+4)

Battery Charge Indicator Plugs The #2943 Traxxas Battery Charge Indicator Plugs make it easy to manage the charge status of your batteries. Use green for fully charged batteries, blue for LiPos that are charged for storage, and grey to indicate discharged batteries. These plugs also help protect the battery plug terminals from accumulating dirt, corrosion, or foreign material during storage and transport. Each package includes 12 indicators: 4 green (charged), 4 grey (discharged), and 4 blue (storage charged)

59,-

Hovedbilde Traxxas 7771 Wheels X-Maxx, black (2)

Traxxas 7771 Wheels X-Maxx, black (2)

Wheels, X-Maxx, black (left & right)

179,-

Hovedbilde Hobbywing Motor EzRun 5687 1100kV Sensorless

Hovedbilde Hobbywing Motor EzRun 5687 1100kV Sensorless

Hobbywing Motor EzRun 5687 1100kV Sensorless

Hobbywing EzRun 5687 Brushless 1100KV Sensorless Motor Features: 4 pole rotor for high torque, fast acceleration response and stable power output Special technology for temperature control implemented by this motor guarantees less heat more efficiency (efficiency rate of up to 90%) CNC machined aluminum housing, high purity copper windings, advanced rotor structure, 0.2mm silicon steel laminations, high-quality stainless steel output shaft, high-precision bearings for high durability and smoothness Rebuild-able design (partially rebuild-able) for routine maintenance effectively prolongs the motor life and raises the motor efficiency This EZRUN motor is a perfect match for the HOBBYWING EZRUN MAX6/5 ESC Temperature sensor port provides all-round protection to the power system (Hobbywing will develop some ESCs with the motor thermal protection function to pair these motors in future) Specs: Type: Brushless Sensorless Poles: 4 KV: 1100 LiPo: 3-8S Resistance: 0.0041Ohm No Load: 4.1A Max Current: 200A Power: Max 5800W Outer Dia: 56mm Length: 87mm Shaft Dia: 8mm Shaft Length: 31mm Weight: 916g Application: 1/5 & 1/6 Light-Duty Vehicles

2.095,-

2.195,-

-5%

Hovedbilde Traxxas 3768 Spring Retainers (2)

Traxxas 3768 Spring Retainers (2)

These are the Traxxas Spring Retainers for Traxxas Shocks. This set contains the spring retainers that hold the springs in place over the shock body and the piston heads that control the amount of oil flow in the shock cylinder. FEATURES: Constructed of molded plastic. Contains enough parts for two shocks. Fits the shocks on most Traxxas nitro and electric powered vehicles. Two hole piston head for greater dampening or three hole piston head for softer spring performance. INCLUDES: One Traxxas Spring Retainer Set with: Two upper and two lower spring retainers Two 2 hole piston head covers Two 3 hole piston head covers REQUIRES: Disassembly of shock to install parts.

39,-

Hovedbilde Traxxas 5099A Ball Bearings 6x16x5mm Black Rubber ...

Traxxas 5099A Ball Bearings 6x16x5mm Black Rubber ...

Ball bearing, black rubber sealed (6x16x5mm) (2)

59,-

Hovedbilde Traxxas 8952 Stub Axle Carriers Rear (Pair) Maxx

Traxxas 8952 Stub Axle Carriers Rear (Pair) Maxx

Carriers, stub axle (left & right)

79,-