Hopp til innhold

Traxxas 9671 Wheels 3.8'' Black (17mm Hex ) (2)

Art.nr: TRX 9671

135,-

Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Traxxas 9671 Wheels 3.8'' Black (17mm Hex ) (2)

Wheels, 3.8" (black) (2) (17mm splined)

 

Scale: 1/8
Size: 3,8 Inch
Suit: Truck
Drive: 17mm Hex

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 9670
Copied
Traxxas 9670 Tires Sledgehammer (17mm Sledge 1/8) 3.8'' (2)

399,-

KJØP
Art.nr: TRX 9672
Copied
Tires and wheels, assembled, glued (3.8" black wheels, Sledgehammer® tires, foam inserts) (2) Sledgehammer® extreme-terrain tires provide maximum traction and control on variety of off-road surfaces. The Sledgehammer's open block tread design clears mud and debris for unmatched traction in loose surfaces. Tires come pre-mounted with foam inserts and glued to 3.8″ black 5-spoke wheels. TSM®-rated for high-speed applications. Fits front or rear. (Requires 17 mm splined hex)    

599,-

699,-

KJØP
-14%

Kunder kjøpte også

Traxxas 9551 Rebuild Kit (Driveshaft #9550, #9654) Sledge Rebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies) (for #9550 front or #9654X rear steel CV driveshafts)

59,-

KJØP
Traxxas 9558 Driveshaft Front CV (Shaft Only) 5x133.5mm Sledge Driveshaft, front, steel constant-velocity (shaft only, 5mm x 133.5mm) (1)

129,-

KJØP
Traxxas 70WT/900cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, the twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 70WT (900cSt) Bottle size: 60ml

99,-

109,-

KJØP
-9%
  RC4WD Miniature Scale Hex Bolts (M2 x 6mm) (Silver)   The first scale hex bolts made for R/C. Taking scale to the next level.       Specifications: High Grade Steel Durable black or silver finishes Thread Length: 0.23in / 6mm Head Hex OD: 0.08in / 2mm M2 Hex Bolts What's Included: 20x RC4WD Miniature Scale Hex Bolts (M2 x 6mm) (Silver)   Notes:   Uses Miniature Scale Hex Bolt Tool (M2 Hex) (Z-S0626) These hex bolts are very small, do not over tighten them. You can use your hand if you don't have the special lug tool. We recommend the use of our special tool for best results.

69,-

KJØP
Disse lagerene er samme størrelse som Tamiya 1150 Ball bearings, black rubber sealed (5x11x4mm) (2)

49,-

KJØP
M-DRIVE Wheel Nut Wrench Tool - 17mm High quality 17mm wheel nut wrench tool made of red/black anodized aluminium. The perfect tool for removing and tightening your 1/8 Buggy, 1/8 Truggy or 1/8 GT wheel nuts. It also fits Traxxas E-Revo, Summit, T-Maxx 3.3, Revo 3.3 & other brands of bigger monster trucks with 17mm wheel nuts. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Size: 9x29x110mm Nut Wrench Socket: 17mm hex Nut Wrench Socket Size: D23 x L53mm  Suitable for: 17mm Wheel Nuts

149,-

KJØP
This is the Traxxas Marine Grease, 30cc FEATURES Roll-up "toothpaste-style" tube   INCLUDES One tube of marine grease compound SPECIFICATIONS  Volume: 1 oz. (30cc)

89,-

99,-

KJØP
-10%
Spur Gear Steel 46T 1.0M Spur gear, 46-tooth, steel (1.0 metric pitch) Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.

139,-

KJØP
This is a pair of pre-mounted Street Fighter HP 3.8" Belted Monster Truck Tires. Are you looking for the ultimate street tire for your 3.8" Monster Truck? Pro-Line now has the solution for you with the all-new Street Fighter HP BELTED 3.8" tires! Pro-Line has developed the technology to mold a High-Performance herringbone weave pattern Belt inside of the Street Fighter HP tires that will prevent the tire from ballooning or expanding during use. This will give you maximum control to put the power down even at high speeds! The Street Fighter HP 3.8" tires provide the incredible grip that you expect from Pro-Line due to the soft M2 compound and the aggressive tread grooves. Pro-Line also heard the calls for a new tire size to fit the current generation of Monster Trucks and the Street Fighter delivers at 3.11" wide and 6.22" tall. Just like all of Pro-Line's tires, they are proudly Made in the USA! Get maximum grip and stability so you can be faster than your buddies with Pro-Line's all-new Street Fighter HP 3.8" Monster Truck tires! Please note that the Street Fighter HP tires have a maximum speed rating that, if exceeded, could result in permanently damaging the internal belt. For the Street Fighter HP 3.8" tires that is 95 mph or about 5,000 RPM. Over revving your Street Fighter HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires. The new Belted Street Fighter HP 3.8" tires come Pre-Mounted on the next generation 3.8" wheel design from Pro-Line, the Raid 3.8" Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires! These new Raid 3.8" wheels make this possible by using a unique 8x32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The hexes are included and are also available separately (6345-00). The built-in adjustability and ease of use make this a new must-have wheel for bashers everywhere! Be the first to own the latest and greatest technology from Pro-Line, get the new Street Fighter HP 3.8" Belted tires now!

949,-

999,-

KJØP
-5%
Gear, 15-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

KJØP
 Features: Viscosity 15000CPS / 719WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears.  1 bottle /60ml

110,-

KJØP
  Traxxas Ultra Premium Tire Glue Ultra Premium Tire Glue (#6468) with packageOnly one tire glue is certified for use with the 100+mph XO-1: Traxxas Ultra Premium Tire Glue. The XO-1 relies on a high-strength tire bond to withstand incredible centrifugal forces at speeds in excess of 100mph. No other glue endures such high loads, which makes Traxxas Ultra Premium Tire Glue the ultimate adhesive for any tire and rim combination (and any other application that requires a high-strength bond).  To preserve the maximum bonding power of Traxxas Ultra Premium Tire Glue, its bottle is specially designed to maintain a tight seal and prevent clogging. The bottle and nozzle are made of glue-resistant material, and a pin integrated into the tightly-fitting screw-on cap assures glue won't clog the bottle tip. The tip's fine opening allows precise glue application every time you reach for Traxxas Ultra Premium Tire Glue. Traxxas Ultra Premium Tire Glue is custom-blended exclusively for Traxxas. There simply is no better bond for high-speed, high-power vehicles. Traxxas Ultra Premium Tire Glue Features:   The only glue Traxxas Certified for the 100+mph XO-1 Highest-quality cyanoacrylate (CA) glue available Fine tip opening for precise glue application Tightly-fitting cap with sealing pin Glue-resistant bottle and tip material Includes two precision application tips Content 20gr    

139,-

159,-

KJØP
-13%
INFORMATION Gear, 18-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.This is a 18 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck or E-Revo            This is the gear which is attached directly to the motor. FEATURES: Machined Steel           Designed for a 3mm shaft INCLUDES: One 18 tooth Pinion Gear           One 3 x 4mm Set Screw REQUIRES: Assembly onto an E-Maxx truck or E-Revo           1.5mm hex wrench to tighten set screw. COMMENTS: This gear is only one of two which are used on the E-Maxx, E-Revo dual motor             set-up.

89,-

KJØP
Spring retainer (adjuster), blue-anodized aluminum, GT-Maxx® shocks (4) (assembled with o-ring)

239,-

KJØP
Battery Charge Indicator Plugs The #2943 Traxxas Battery Charge Indicator Plugs make it easy to manage the charge status of your batteries. Use green for fully charged batteries, blue for LiPos that are charged for storage, and grey to indicate discharged batteries. These plugs also help protect the battery plug terminals from accumulating dirt, corrosion, or foreign material during storage and transport. Each package includes 12 indicators: 4 green (charged), 4 grey (discharged), and 4 blue (storage charged)  

59,-

KJØP
RPM Body Savers for Traxxas X-Maxx Bodies Works with Traxxas #7711, #7711A & #7717G, #7711R & #7711X bodies Quick Notes: Works with new or damaged bodies Disguised for improved visual appeal Works with Traxxas #7711, #7711A & #7717G, #7711R & #7711X bodies The clipless body mounting system Traxxas uses on the X-Maxx is a handy system to have but it tends to have one fatal flaw – the mounting screw holes crack easily, rendering those expensive new bodies useless fairly quickly. If you’ve managed to pull any of your body mounting screws through the body or if you think it’s about to happen, we have the perfect solution to save you from ugly, thick body washers or worse, buying a new body. RPM Body Savers for the X-Maxx are a simple, yet clever solution to solve that problem. Out front, they look like molded hood vents (2) and A/C vents (2) while in the rear, they look like exposed sections of riveted metal (2). It’s a perfect way to camouflage their intended purpose and yet still keep the body firmly attached. The way they work is straightforward and twofold. Out front, they work similarly to oversized washers, yet have significantly more surface area than most washers, without detracting from the looks of your favorite ride. Out back, there are two pairs of screws holding the sub-frame of the body mounting system to the body. Our rear Body Savers tie two pairs of screws together, dispersing the pressure of holding the body to the sub-frame over a wide area of the body. Even if the bottom of the mounting holes in the body are completely ripped out from prior crashes, our system still works! RPM Body Savers are molded in black from our ultra strong, engineering grade nylons for unmatched performance and are sold with enough Body Savers to protect the entire vehicle. Tech Notes: RPM Body Savers are tested to work with Traxxas #7711, #7711A & #7717G, #7711R & #7711X bodies only. They have not been tested nor are they guaranteed to work with any other Traxxas or aftermarket bodies.

199,-

KJØP
Traxxas 9670 Tires Sledgehammer (17mm Sledge 1/8) 3.8'' (2)

399,-

KJØP
Traxxas 9517 Wing Black Sledge Wing (black)/ wing washer / 4x12mm FCS (2)

199,-

KJØP
RPM Threaded Hinge Pins for X-Maxx Fits* stock Traxxas A-arms as well as RPM #82352, #82354 & #82355 Quick Notes: Manufactured from stainless steel Fits* stock Traxxas A-arms as well as RPM #82352, #82354 & #82355 Can be used in place of CEN #GS025* Works in the outer, lower a-arm hinge pin location only In response to customer demand, we’re proud to release a set of threaded hinge pins for the Traxxas X-Maxx. RPM Threaded Hinge Pins work with stock Traxxas A-arms as well as RPM A-arms, are manufactured from stainless steel and are tough as nails! If you’ve lost or damaged your stock hinge pins, or perhaps you’re tired of losing those tiny hinge pin retaining screws, give RPM threaded hinge pins a shot and never look back! Tech Notes: RPM Threaded Hinge Pins are 4mm x 56mm and work in the outer, lower A-arm hinge pin location only. Each kit comes with 4 – threaded hinge pins and 4 – M3 locknuts. Our hinge pins can be used as a replacement for CEN GS025 hinge pins as well but RPM versions use a 3mm locknut instead of a 4mm version. When used with the X-Maxx (using stock or RPM A-arms), some minor modification of the A-arms is required for the hinge pins to fit (see instructions for more information).

129,-

139,-

KJØP
-7%
Traxxas 60WT/700cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 60WT (700cSt) Bottle size: 60ml

99,-

109,-

KJØP
-9%
Traxxas X-Maxx Heavy-Duty Roof Skid - Black Skid plate, roof (body) (black)/ 3x15mm CS (4) (requires #7713X to mount) Just like our heavy-duty suspension arms, new X-Maxx roof skid plates use our toughest composite material. Whether you’re sending it at the skate park, or launching from a ramp, these parts are built with just the right amount of flex to resist breakage--even in cold weather! These important accessories protect the roof during rollovers.

129,-

139,-

KJØP
-7%
Tires, Maxx AT (left & right) (2)/ foam inserts (2)   X-Maxx Maxx AT 8.0x4.0" tires and foam inserts. Package includes (1) left and (1) right side tire.

599,-

KJØP
Wheels, X-Maxx, black (left & right)

179,-

KJØP
  Onyx Adapter Male T-Plug to Female XT90

89,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png