Hopp til innhold

Traxxas 7768R Stub Axle Red Aluminium

Art.nr: TRX 7768R

185,-

Traxxas

Traxxas

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Stub axle, aluminum (red-anodized) (1) (use only with #7750X driveshaft)

 

X-Maxx red-anodized aluminum stub axle. For use with 8s-spec heavy duty driveshaft (#7750X) only.

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 7768
Copied
X-Maxx blue-anodized aluminum stub axle. For use with 8s-spec heavy duty driveshaft (#7750X) only.   1 in package, you will need 4 packages for a complete set for X-maxx.

185,-

KJØP
Art.nr: TRX 7768G
Copied
Stub axle, aluminum (green-anodized) (1) (use only with #7750X driveshaft)

185,-

KJØP
Art.nr: TRX 7768A
Copied
Stub axle, aluminum (black-anodized) (1) (use only with #7750X driveshaft)

185,-

KJØP

Kunder kjøpte også

Traxxas 7897-BLUE - Aluminum Drag Link BLUE The aluminum drag link improves the appearance, ruggedness, and steering precision of your X-Truck™. The double-shear billet 6061-T6 aluminum construction reduces flex between the steering bellcranks. The brilliantly-anodized finish adds vibrant color to your vehicle and features a high-contrast laser etched TRX® logo. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time. Features:­ Milled from high-grade 6061-T6 aluminum Brilliant anodized finish Premium quality construction with factory fit and finish Compatible with 7747 aluminum servo horn Fits X-Maxx® and XRT®

219,-

249,-

KJØP
-12%
Driveshaft, steel constant velocity (shaft only, 190.3mm) (1) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

229,-

239,-

KJØP
-4%
Steering Blocks L&R (Pair) XRT, X-Maxx Steering blocks, left & right These left and right steering blocks were redesigned and beefed-up for XRT™. Standard in XRT, they can be used to upgrade X-Maxx® for extreme duty and maximum strength. (Steering blocks require 5196A inner bearings)

99,-

109,-

KJØP
-9%
Wheel nuts, splined, 17mm, serrated (black-anodized) (4)

149,-

159,-

KJØP
-6%
Gear, 15-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)

129,-

139,-

KJØP
-7%
This is a assortment of e-clips, c-clips, and body clips for the Traxxas line of cars and trucks. INCLUDES: 28 of the 2.5mm E-clips, 2 of the 3mm E-clips, 3 of the 5mm E-clips,           4 of the shock C-clips and 3 body clips.

29,-

39,-

KJØP
-26%
  Skidplate center

119,-

129,-

KJØP
-8%
Traxxas 7754R Drive cup, steel, extreme heavy duty (2)/ 3x8mm CS, heavy duty (2) (use only with #7750X driveshaft) (machined, heat treated) Give your X-Maxx® or XRT™ the toughest driveline possible with these extreme heavy-duty drive cups. The drive cups are machined out of high-grade heat-treated steel to resist rounding out from dogbone contact. Includes 3x8 mm screws (2). Sold in pairs. (Use only with 7750X driveshafts). Accessory part for these models: X-Maxx® XRT™

499,-

539,-

KJØP
-7%
Disse lagerene er samme størrelse som Tamiya 850 Ball bearings, black rubber sealed (5x8x2.5mm) (2)

49,-

KJØP
These are the 5107A 17 x 26 x 5mm Ball Bearings  for the Traxxas X-Maxx Monster Truck     FEATURES Steel construction with black rubber seals  Used in the front and rear differentials of the X-Maxx   INCLUDES Two 17 x 26 x 5mm Black Rubber Sealed Ball Bearings   SPECIFICATIONS  Inner Diameter: 17mm  Outer Diameter: 26mm  Thickness: 5mm

109,-

119,-

KJØP
-8%
Disse lagerene er samme størrelse som Tamiya 1510 This is a set of 10x15x4mm Ball Bearings for use on the Traxxas Revo. FEATURES: Steel Construction           Shielded with blue rubber seals INCLUDES: Two Ball Bearings REQUIRES: Assembly to vehicle SPECS:    Inner Diameter: 10mm           Outer Diameter: 15mm           Side Thickness:  4mm COMMENTS: These bearings are used to support the Primary Clutch (one needed).   Tamiya  630    3X6X2.5mm Tamiya  730    3X7X3mm Tamiya  840    4X8X3mm Tamiya  850    5X8X2.5mm Tamiya 1050    5X10X4mm Tamiya 1060    6X10X3mm Tamiya 1150    5X11X4mm Tamiya 1260    6X12X4mm Tamiya 1280    8X12X3.5mm Tamiya 1480    8x14x4mm ??? Tamiya 1510    10X15X4mm Tamiya 1680    8X16X5mm

89,-

99,-

KJØP
-10%
These are the Suspension Pin Retainersfor the Traxxas X-Maxx Monster Truck. FEATURES Molded composite plastic construction Installs with inner suspension pins on upper suspension arms to hold pins in place INCLUDES Four Suspension Pin Retainers Replacement part for these models: Funco® Pro Scale® Sand Car X-Maxx® XRT® Accessory part for these models: Maxx® Slash® Maxx® X-Maxx® Ultimate XRT® Ultimate

35,-

45,-

KJØP
-22%
Ball Bearings 20x32x7mm Rubber Sealed (2) Disse passer til TRX 7752X  

129,-

139,-

KJØP
-7%
Body reinforcement set (fits #7711 X-MAXX body) Traxxas body reinforcement sets provide added protection for your X-Maxx during extreme driving. These high-strength composite reinforcements help spread impact forces through the body, ensuring long-lasting fun through the toughest landings and hardest hits.

79,-

KJØP
Traxxas 7734X - X-Maxx Rear Bumper Mount and Bumper Support X-Maxx® rear bumper mount and bumper support

89,-

KJØP
These are the Front and Rear Body Mounts  for the Traxxas X-Maxx Monster Truck   FEATURES One-piece molded composite plastic construction  Fastens front and rear of body to chassis INCLUDES One each Front and Rear Body Mounts with Mounting Screws

269,-

KJØP
This is the Differential Carrier  for the Traxxas X-Maxx Monster Truck     FEATURES Molded composite plastic construction   INCLUDES Differential Carrier  Two X-Ring Gaskets  Two Ring Gear Gaskets

55,-

KJØP
Output gear, 51-tooth, metal (requires #7785X input gear)   Steel 51-tooth output gear for X-Maxx. Requires #7785X steel input gear.

149,-

KJØP
Body reinforcement set Fits #8611 E-REVO body

95,-

KJØP
RPM Replacement Bearings for RPM X-Maxx Oversized Axle Carriers Not Compatable with 7752 Quick Notes: They are NOT compatible with stock Traxxas axle carriers This is a set of replacement bearings for RPM #81732 Oversized Axle Carriers for the Traxxas X-Maxx. These bearings are not replacement bearings for stock Traxxas Axle Carriers (#7752). Tech Notes: RPM replacement bearings are 20x32x7mm in size and only fit RPM #81732 Oversized Axle Carriers. Not compatible with stock Traxxas axle carriers.

169,-

KJØP
Oil Differential 20m Weight

179,-

KJØP
These are the 17mm Splined Wheel Nuts for the Traxxas X-Maxx Monster Truck. FEATURES Aluminum construction, anodized red in color Threads onto stub axles to hold wheels in place INCLUDES Four 17mm Splined Wheel Nuts

149,-

159,-

KJØP
-6%
Bulkhead tie bar, upper (1)/ lower (2) (steel)

119,-

129,-

KJØP
-8%
These are the 5106 15 x 24 x 5mm Ball Bearings for the Traxxas X-Maxx Monster Truck. FEATURES Steel construction with blue rubber seals Used in the front and rear differentials of the X-Maxx INCLUDES Two 15 x 24 x 5mm Blue Rubber Sealed Ball Bearings SPECIFICATIONS Inner Diameter: 15mm Outer Diameter: 24mm Thickness: 5mm

99,-

109,-

KJØP
-9%
These are the 5182A 20 x 27 x 4mm Ball Bearings for the Traxxas X-Maxx Monster Truck. FEATURES Steel construction with black rubber seals Used as the inner bearing in the front steering blocks and the rear stub axle carriers INCLUDES Two 20 x 27 x 4mm Black Rubber Sealed Ball Bearings SPECIFICATIONS Inner Diameter: 20mm Outer Diameter: 27mm Thickness: 4mm

129,-

139,-

KJØP
-7%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png