Hopp til innhold

Traxxas 7712 Tailgate Protector (set) X-MAXX

Art.nr: TRX 7712

79,-

Traxxas

Traxxas

På lager: 3

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

X-Maxx tailgate protector, insert, and M3x8mm flathead hardware.

Provides additional strength for rear and corners of X-Maxx for added durability.

Tailgate protector/ M3x8 mm flathead screw (4)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Seal kit receiver box

49,-

Ikke på lager
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-41 Bright Silver).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-31 Smoke).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
Traxxas 7762X Rebuild kit, GTX shocks (lower cartridge, assembled, pistons, piston nuts, bladders) (renews 2 shocks) Restore your GTX™ shocks' performance with this shock rebuild kit. Kit includes assembled lower cartridges, pistons, piston nuts, and bladders. One kit refreshes two shocks. Accessory part for these models: X-Maxx XRT

109,-

119,-

KJØP
-8%
Features: Viscosity 500CPS / 41WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. ●Scope of delivery : 1 bottle /60ml

79,-

KJØP
Features: Viscosity 300CPS / 27WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. ●Scope of delivery : 1 bottle /60ml

75,-

KJØP
Traxxas 6443 Spur gear, 50-tooth (machined, hardened steel) (wide face, 1.0 metric pitch) 50-tooth spur gear (1.0 metric pitch) is machined from hardened steel with extra-wide steel teeth for ultimate power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Accessory part for these models: E-Revo® VXL Brushless Maxx® X-Maxx® XO-1® XRT™

429,-

469,-

KJØP
-9%
Traxxas Body X-Maxx Solar Flare Car Type: Truck Scale: 1/8 XL, Large Scale Painted: Yes

1.299,-

KJØP
LED light bar, front (high-voltage) (40 white LEDs (double row), 82mm wide)   Fits: X-Maxx® or Maxx®)

249,-

KJØP
Traxxas 7747-BLUE - Aluminum Servo Horn - Blue Aluminum Servo HornIncrease the precision and durability of your X-Truck ® with this double-shear aluminum servo horn. Machined from tough 6061-T6 aluminum, the servo horn adds colorful style with a brilliant anodized finish. Ideal for high-power upgraded servos, the servo horn integrates perfectly with the upgraded 7746 and 7843 aluminum bellcranks. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time. Features: Milled from high-grade 6061-T6 aluminum Perfect upgrade for high-power servos Brilliant anodized finish Premium quality construction with factory fit and finish Compatible with 7746 and 7843 aluminum bellcranks Fits XRT® and X-Maxx® and Funco® Pro Scale® Sand Car Accessory part for these models: X-Maxx® XRT® Funco® Pro Scale® Sand Car

199,-

219,-

KJØP
-9%
Traxxas 7831A - HD Suspension arm White, lower (left, front or rear), heavy duty (1) Designed for the Extreme New heavy-duty X-Maxx suspension arms use our toughest composite material. Whether you’re sending it at the skate park, or launching from a ramp, these arms are built with just the right amount of flex to resist breakage. These popular accessories stand up to the most punishing drivers and even cold weather. Six colors available! Black, Blue, Red, Orange, Green & White

145,-

KJØP
Traxxas 7830A - HD Suspension arm White, lower (right, front or rear), heavy duty (1) Designed for the Extreme New heavy-duty X-Maxx suspension arms use our toughest composite material. Whether you’re sending it at the skate park, or launching from a ramp, these arms are built with just the right amount of flex to resist breakage. These popular accessories stand up to the most punishing drivers and even cold weather. Six colors available! Black, Blue, Red, Orange, Green & White

145,-

KJØP
Høykvakitets Silicone demper olje med viskositet 350. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

KJØP
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-16 Metallic Blue).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
This is the Pro-Line Clear 2017 Ford F-150 Raptor Body. FEATURES Fits the Traxxas X-Maxx Molded from genuine clear GE lexan Aggressive scale body detail Full color body trim and logo decal sheet Precut INCLUDES Clear 2017 Ford F-150 Raptor Body, Decal and Window Mask Sheets REQUIREMENTS Body Reamer Lexan safe spray or brush-on paint SPECIFICATIONS Length: 27.7" (705mm) Width: 9.7" (246mm) Height: 7.5" (190mm)

1.095,-

1.195,-

KJØP
-8%
Høykvakitets Silicone demper olje med viskositet 800. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

KJØP
RPM Rear A-arms for the ARRMA Kraton 4S BLX & Outcast 4S BLX eplace stock ARRMA #AR330521 Quick Notes: Nearly 25% thicker than stock a-arms for extreme durability Less slop for improved suspension and steering performance Second shock mount hole for added adjustability Replace stock ARRMA #AR330521 RPM A-arms for 4S BLX versions of the ARRMA Kraton & Outcast are designed primary for strength and durability but we’ve added a few extra features in as well. First is slop elimination. Our A-arms reduce the amount of movement of the A-arm at the hinge pins, providing for better steering response and more consistent camber, caster and toe angle settings. Our next improvement is the addition of a second shock mount hole further out on the arm, providing for a lower profile suspension set-up. This shock position allows the suspension to lay down a little further, dropping the ride height for a lower center of gravity and better cornering stability. Our most important update is durability. Our new A-arms are massive! At almost 25% thicker than stock, our A-arms will take a pounding and come back for more! All RPM A-arms are molded from our nearly indestructible blend of engineering grade nylons for performance you can rely on when conditions are at their worst! Tech Notes: RPM A-arms for 4S versions of the ARRMA Kraton & Outcast are sold in pairs. Rear A-arms replace stock #AR330521.

149,-

169,-

KJØP
-12%
Steering Blocks L&R (Pair) XRT, X-Maxx Steering blocks, left & right These left and right steering blocks were redesigned and beefed-up for XRT™. Standard in XRT, they can be used to upgrade X-Maxx® for extreme duty and maximum strength. (Steering blocks require 5196A inner bearings)

99,-

109,-

KJØP
-9%
Traxxas 6442 Spur gear, 46-tooth (machined, hardened steel) (wide face, 1.0 metric pitch) 46-tooth spur gear (1.0 metric pitch) is machined from hardened steel with extra-wide steel teeth for ultimate power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Accessory part for these models: E-Revo® VXL Brushless Maxx® X-Maxx® XO-1® XRT™

429,-

469,-

KJØP
-9%
Traxxas 7852 Carriers, stub axle (rear) (left & right) Left and right rear stub axle carriers Replacement part for these models: XRT™

109,-

KJØP
Suspension arms, upper, red (left or right, front or rear) (2) (for use with #7895R X-Maxx® WideMaxx® suspension kit) Heavy-duty WideMaxx® suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or launching off a ramp, these arms are built for extreme punishment.

149,-

KJØP
KJØP
Suspension arm, lower, green (1) (right, front or rear) (for use with #7895G X-Maxx® WideMaxx® suspension kit) Heavy-duty WideMaxx® suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or launching off a ramp, these arms are built for extreme punishment.

179,-

199,-

KJØP
-10%
Suspension arm, lower, green (1) (left, front or rear) (for use with #7895G X-Maxx® WideMaxx® suspension kit) Heavy-duty WideMaxx® suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or launching off a ramp, these arms are built for extreme punishment.

189,-

199,-

KJØP
-5%
Traxxas 7754R Drive cup, steel, extreme heavy duty (2)/ 3x8mm CS, heavy duty (2) (use only with #7750X driveshaft) (machined, heat treated) Give your X-Maxx® or XRT™ the toughest driveline possible with these extreme heavy-duty drive cups. The drive cups are machined out of high-grade heat-treated steel to resist rounding out from dogbone contact. Includes 3x8 mm screws (2). Sold in pairs. (Use only with 7750X driveshafts). Accessory part for these models: X-Maxx® XRT™

499,-

539,-

KJØP
-7%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png