Hopp til innhold

Traxxas 7669 Wheel Hex (4)

Art.nr: TRX 7669

39,-

Traxxas

Traxxas

På lager: 7

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

 

Wheel Hex (4)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Silver Leaf Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.            Keep out of the reach of children.

109,-

KJØP
This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Metallic Red Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.            Keep out of the reach of children.

109,-

KJØP
Motor, 370 (assembled with bullet connectors) Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® Rally 1/18 LaTrax® Teton®

119,-

KJØP
These are the Camber and Toe Links for the Latrax Rally Car from Traxxas. FEATURES Plastic construction Camber links install between stub axle carriers and bulkhead for front and rear wheels Toe links install between caster/steering blocks and steering bellcranks on front wheels INCLUDES Four Camber and two Toe Links

35,-

KJØP
This is the Bulkhead for the Latrax Rally Car from Traxxas.     FEATURES Fits front and rear  Plastic construction   INCLUDES Upper and Lower Bulkhead Sections

69,-

KJØP
 This is a pair of Shock Springs for the  LaTrax Teton Monster Truck from Traxxas.   FEATURES Steel construction, black in color  Fits front and rear stock or optional shocks   INCLUDES Two Shock Springs   SPECIFICATIONS  Length: 1.8" (46mm)  Diameter: 0.47" (12mm)

39,-

KJØP
 These are the Front and Rear Bumpers for the                   LaTrax Teton Monster Truck from Traxxas. FEATURES: Plastic construction, black in color   INCLUDES: Front and Rear Bumpers for the Teton Monster Truck

65,-

KJØP
This is a 3x6mm Countersunk Machine Screw Set from Traxxas FEATURES: Steel construction INCLUDES: (6) 3x6mm screws

35,-

KJØP
M-DRIVE Hex/Nut Driver Tool Set - 4, 5.5, 7 & 8mm High quality nutdriver wrench tool set with black anodized aluminium handles and tough drivers made of HSS steel. The wrenches are also available separately. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Material: High quality HSS Suitable for: Nut Driver 4.0mm: For M2 nuts Nut Driver 5.5mm: For M3 nuts Nut Driver 7.0mm: For M4 nuts Nut Driver 8.0mm: For M5 nuts (and std glow plugs)

249,-

KJØP
M-DRIVE Hex/Allen Wrench Tool Set - 2, 2.5 & 3mm - Ball Hex High quality ball tipped hex/allen wrench tool set with black anodized aluminium handles and tough HSS steel in the tips. The wrenches are also available separately plus also spare tips/bits. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Diameter: 3mm Tip/Bits Material: High quality HSS

179,-

199,-

KJØP
-10%
M-DRIVE Hex/Allen Wrench Tool - 1.5mm Straight Hex High quality hex/allen wrench tool with black anodized aluminium handle and tough HSS steel tip. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Hex Size: 1.5mm Tip/Bits Diameter: 3mm Tip/Bits Material: High quality HSS Suitable for: Electric motor pinion M3 crub screws (most 1/10 cars - some larger trucks use a larger M4 screw that needs a 2mm wrench)

69,-

KJØP
D-MAX™ Charging Harness for Radio Batteries with Futaba Connector This is a charge lead for charging TX & RX radio batteries with a Futaba connector. Specs: Length: 50cm Wires: 20AWG Charger Connectors: 4mm male bullets Battery Connector: Futaba RX

69,-

KJØP
This is the 10 Tooth Pinion Gear and Set Screw for the LaTrax Teton Monster Truck from Traxxas. FEATURES Metal construction Stock replacement pinion gear INCLUDES 10 Tooth Pinion Gear Set Screw Two 3x4mm Phillips Head Screws Metal Plate

29,-

KJØP
This is a set of Traxxas 6x13x5mm Ball Bearings                    for use on the E-Revo FEATURES: Stainless Steel bearing construction           Blue rubber dirt shields INCLUDES: (2) 6x13x5mm ball bearings  Part #5180 SPECS:    Inside diameter: 6mm (0.24")           Outside diameter: 13mm  (0.51")           Width: 5mm (0.20")

65,-

KJØP
Camber links (4)/ toe links (2)

39,-

KJØP
This is a pair of Oil-Filled Shocks for the LaTrax Teton Monster Truck from Traxxas FEATURES Fully assembled Steel springs, black in color INCLUDES Two Teton Monster Truck Wheels and Tires Plastic bottle of 20wt Silicone Shock Oil Four Threaded Steel Ball Links

189,-

KJØP
  Screw set complete

49,-

KJØP
Box, receiver/ ESC mount/ rubber plug/ adhesive foam tape (2)

39,-

KJØP
Pivot balls: black (6), silver (2), black (long) (2)

89,-

KJØP
These are the Front or Rear Driveshaft Assemblies for the LaTrax Teton Monster Truck from Traxxas. FEATURES Composite plastic construction Transfers power from differentials to wheels INCLUDES Two Front or Rear Driveshaft Assemblies

65,-

KJØP
This is a set of Complete Suspension Pins for the Traxxas Latrax Rally Car. FEATURES Steel construction Upper and lower pins for front and rear suspension INCLUDES Eight Suspension Pins, four Screws

75,-

KJØP
This is the Servo Mount/Servo Horn for the  Latrax Rally Car from Traxxas.     FEATURES Plastic construction  Servo mount anchors steering servo to chassis   INCLUDES One each Servo Mount/Servo Horn

35,-

KJØP
These are the Front or Rear Suspension Arms for the LaTrax Teton Monster Truck from Traxxas. FEATURES Composite plastic construction Fastens to front or rear bulkheads INCLUDES Two Front or Rear Suspension Arms

69,-

KJØP
By Traxxas   FEATURES Made of black plastic   INCLUDES Two caster hubs (C-hubs)  Two steering blocks   SPECIFICATIONS  caster hubs, length: 28mm (1-1/8")  width: 14mm (1/2")  height: 16mm (5/8")  steering blocks, length: 29mm (1-1/8")  width: 28mm (1-1/8")  height: 20mm (3/4")

59,-

KJØP
These are the Front and Rear Body Mounts for the  LaTrax Teton Monster Truck from Traxxas.     FEATURES Plastic construction, black in color  Installs in shock towers and holds front and rear of body in place   INCLUDES Front and Rear Body Mounts for the Teton Monster Truck

39,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png