Hopp til innhold

Traxxas 6523 Sensor Temperature/Voltage Short

Art.nr: TRX 6523

139,-

Traxxas

Traxxas

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

The Temperature Sensor installs on the motor or engine to measure its temperature

For the Traxxas TQi Telemetry System.

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

SERVO EXTENSION CABLE 30CM

29,-

KJØP
  Traxxas Ultra Premium Tire Glue Ultra Premium Tire Glue (#6468) with packageOnly one tire glue is certified for use with the 100+mph XO-1: Traxxas Ultra Premium Tire Glue. The XO-1 relies on a high-strength tire bond to withstand incredible centrifugal forces at speeds in excess of 100mph. No other glue endures such high loads, which makes Traxxas Ultra Premium Tire Glue the ultimate adhesive for any tire and rim combination (and any other application that requires a high-strength bond).  To preserve the maximum bonding power of Traxxas Ultra Premium Tire Glue, its bottle is specially designed to maintain a tight seal and prevent clogging. The bottle and nozzle are made of glue-resistant material, and a pin integrated into the tightly-fitting screw-on cap assures glue won't clog the bottle tip. The tip's fine opening allows precise glue application every time you reach for Traxxas Ultra Premium Tire Glue. Traxxas Ultra Premium Tire Glue is custom-blended exclusively for Traxxas. There simply is no better bond for high-speed, high-power vehicles. Traxxas Ultra Premium Tire Glue Features:   The only glue Traxxas Certified for the 100+mph XO-1 Highest-quality cyanoacrylate (CA) glue available Fine tip opening for precise glue application Tightly-fitting cap with sealing pin Glue-resistant bottle and tip material Includes two precision application tips Content 20gr    

139,-

159,-

KJØP
-13%
Yeah Racing XT60 Cable w/ External Jst Plug Description: Use this as an adaptor on your power lead to get an extra JST plug with battery voltage on top to your normal XT60 connection. Feature: For: For: Powering Fans or Winches, Servos Material: Plastic Color: Black/Red Include: XT60 Cable w/ External Jst Plug (1 pc)

45,-

KJØP
Speed bit, hex driver, straight, 2.0mm (110mm length)

119,-

129,-

KJØP
-8%
Yeah Racing RC PTFE Bearing Set with Bearing Oil For Traxxas TRX-4 (Ver.2) Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision *Now comes with bearing oil for maintaining bearings in long run. (This new bearing set (with bearing oil) will replace the old item.)   Specifications: Material: Steel Shielding: Rubber   Includes: Bearing (40 Pcs) -4X10X4(4pcs) -5X8X2.5(3pcs) -5X10X4(1pc) -5X11X4(12pcs) -6X12X4(4pcs) -6X13X5(6pcs) -10X15X4(4pcs) -12X18X4(2pcs) -7x14x5(2pcs) (ver.2) -15x21x4mm(2pcs) (ver.2) Bearing Oil (15ml) #YA-0215(1pc)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable.

329,-

349,-

KJØP
-6%
1.9" 5 Lug Steel Wheel Hex Hub     Specifications: CNC Machined Provides for Hex Mounting Option     What's Included: 4x 1.9" 5 Lug Steel Wheel Hex Hub Notes:   Due to many different methods to design Tires and Wheels, we have no control over other manufacturers products. So we can only tell you that RC4WD Tires and Wheels work together. In some cases our Wheels and Tires will work with other brand Wheels and Tires, but we can not guarantee the outcome. Fits 1.55" Landies Vintage Stamped Steel Beadlock Wheels (White) (Z-W0076) Fits 5 Lug Wagon 1.9" Steel Stamped Beadlock Wheels (Black) (Z-W0129) Fits 5 Lug Wagon 1.9" Single Steel Stamped Beadlock Wheel (Black) (Z-Q0023) Fits 5 Lug Wagon 1.9" Steel Stamped Beadlock Wheels (White) (Z-W0127) Fits 5 Lug Wagon 1.9" Single Steel Stamped Beadlock Wheel (White) (Z-Q0033) Fits 5 Lug Wagon 1.9" Steel Stamped Beadlock Wheels (Chrome) (Z-W0001) Fits 5 Lug Wagon 1.9" Single Steel Stamped Beadlock Wheel (Chrome) (Z-Q0040)

179,-

199,-

KJØP
-10%
RC4WD MAXTRAX Vehicle Extraction and Recovery Boards 1/10 (Black) (2)     RC4WD has teamed up with MAXTRAX to bring you the ultimate vehicle recovery and extraction boards. Officially licensed by MAXTRAX, these vehicle extraction and recovery boards come in a range of colors. Inspired by the 1:1 size, these boards provide a safe, simple, quick and an easy method to help get you and your truck out of any tough spots!   Specifications: Molded Plastic Construction Easily Stackable Amazing Detail Color: Black Length: 4.53in / 115mm Width: 1.26in / 32mm Hight: 0.28in / 7mm Weight: 0.42oz / 12g Manufactured by RC4WD   Shown installed with RC4WD Gelande II RTR Truck Kit w/D90 Body Set for example (Not Included)       What’s Included: 2x RC4WD MAXTRAX Vehicle Extraction and Recovery Boards 1/10 (Black) 1x MAXTRAX Decal Sheet   Optional Colors: RC4WD MAXTRAX Vehicle Extraction and Recovery Boards 1/10 (Safety Orange) (2) (Z-S0612) RC4WD MAXTRAX Vehicle Extraction and Recovery Boards 1/10 (Titanium Grey) (2) (Z-S1835) MAXTRAX and the MAXTRAX name are registered trademarks of the MAXTRAX company. The MAXTRAX logo is property of MAXTRAX and used under license to RC4WD.

99,-

119,-

KJØP
-17%
   This is the Magnet Holder/Center Diff Telemetry Magnet from Traxxas. FEATURES: Plastic magnet holder INCLUDES: Magnet Holder, Center Diff Telemetry Magnet and three 3x8mm Screws

35,-

KJØP
Connector, power tap (with voltage sensor)/ wire tie/ 2.6x8 BCS (2)

89,-

KJØP
This is the optional Center Differential Kit for use on the                  Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Center Differential Kit REQUIRES: Installation on the vehicle  

259,-

Ikke på lager
These are a pair of 4x7mm Rubber Sheilded Bearings                from Traxxas. FEATURES: Rubber shielded           Steel construction INCLUDES: Two rubber shielded bearings REQUIRES: Nothing SPECS:    Thickness: 2.6mm           Inner Diameter: 4mm           Outer Diameter: 7mm

55,-

KJØP
Disse lagerene er samme størrelse som Tamiya 850 This is a 2 pack of Traxxas 5X8mm Ball Bearings. FEATURES: Metal bearing construction           Blue rubber dirt shields INCLUDES: (2) 5X8mm ball bearings    Part #5114 SPECS:    Inside diameter:      3/16"    (5mm)           Outside diameter:     5/16"    (8mm)           Width:                3/32"  (2.5mm)

49,-

KJØP
These are the Aluminum Hex Wheel Hubs from Traxxas. FEATURES: Aluminun construction           Blue in color INCLUDES: Four Hex Wheel Hubs REQUIRES: Installation on the vehicle SPECS:    Hex Size: 12mm           Thickness: 4.2mm (0.17")  

219,-

KJØP
These are the Machined Steel Hollow Balls from Traxxas. FEATURES: Steel construction           Silver in color INCLUDES: Twenty Two Hollow Balls SPECS:    Length: 5mm (0.20")           Outer Diameter: 4.5mm (0.18")           Inner Diameter: 2.5mm (0.1")  

99,-

KJØP
Oil, differential (100K wt) (0.7 oz (20cc)) Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions, altering the limited slip capability can enhance turning performance for faster exit speeds. FEATURES: 100K weight oil INCLUDES: 0.7oz  (20cc) bottle of oil w/ 1-1/2" pointed fill cap

99,-

109,-

Ikke på lager
-9%
This is the Diff Shim Set for the Associated 18T. FEATURES: Steel construction INCLUDES: Four shims and instruction sheet REQUIRES: Installing on differential shaft SPECS:    Diameter: inner 8mm, outer 10mm

79,-

89,-

Ikke på lager
-11%
Traxxas 60WT/700cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 60WT (700cSt) Bottle size: 60ml

99,-

109,-

KJØP
-9%
Skid plate, roof (body) (black)/ 3x10mm CS (4)

79,-

89,-

KJØP
-11%
Praktisk verktøy for innsetting og uttak av kulelager. Er tilpasset for 2, 3 , 4, 5 , 6 , 8 , 9 , 10 , 12, 14mm

139,-

KJØP
Traxxas High-Intensity LED Light Kit for Maxx Monster Trucks Built Maxx® Tough! The Traxxas Maxx redefines speed, durability and toughness with its innovative design and massively overbuilt chassis. Only Traxxas could design an LED light kit worthy of the Maxx’s extreme performance. Built to handle brutal real-world punishment, this light kit is waterproof and built Traxxas Tough™ for maximum fun. Blaze a path through the night with this intense-white high-output LED light kit. QUICK FEATURES ON MAXX LED LIGHT KIT: Compatible with Velineon VXL-4s ESC Fully functioning brake lights that work in both forward and reverse direction Fully waterproof Three default lighting modes controlled from the power amplifier Low and high beam brightness settings Easy to install with simplified, concealed, color-coded wiring Includes front and rear bumpers with LED cutouts Firmware updatable through the app App-controlled lighting functions* Turn lights on/off remotely Build a custom dashboard Customize lighting configurations and actions Add additional lighting components Traxxas innovation delivers features and performance not found on any other lighting system. The included high voltage amplifier packs the muscle to efficiently power both high-power light bars in the kit while minimizing losses from excessive current and heat. The tightly regulated output provides stable lighting performance, without flickering or dimming as the battery voltage changes. The smart brake lights work when brakes are applied in both forward and reverse directions. This eliminates the common and annoying problem with generic aftermarket systems that turn on the brake lights while reversing. MAXX LED LIGHT KIT INCLUDES: High-output front LED light bar Multi-function rear LED light bar Replacement bumpers with LED cutouts High-voltage 8-channel power amplifier for intense, brilliant LED lighting Regulated output for stable lighting performance (no flickering or dimming as the battery voltage changes) Mounting hardware Wiring is simple: Plug the main connector from the power amplifier into the power port on the Traxxas VXL-4s Electronic Speed Control, and then plug the individual lighting modules into the power amplifier. Switch between three manual lighting modes on the power amplifier (such as high beam and low beam), or use the Traxxas Link app and Wireless Module (#6511*) to control individual lights remotely and create custom lighting configurations. Of course, since it’s from Traxxas, this powerful, feature-rich system is rugged and fully waterproof for all of your exciting RC adventures. High-Voltage Power Rather than draw valuable power away from the BEC, the power amplifier uses the Power Port on the VXL-4s ESC to tap power directly from the batteries. The power amplifier transforms and regulates battery current to for reliable high-power performance. Technology Customize your setup with three different lighting modes on the amplifier. Use the Traxxas Link App* to further customize the lighting modes to your specifications or turn the lights on and off directly in the app. The kit includes all mounting hardware to make installation a breeze. *Requires Traxxas Link App (available in the Apple App Store™ or on Google Play™) and TQi transmitter with the Traxxas Link Wireless Module (part #6511, sold separately).

1.239,-

1.349,-

KJØP
-8%
Body, Maxx® (clear, requires painting)/ window masks/ decal sheet

389,-

429,-

KJØP
-9%
Body support, rear/ 3x10mm CS (4) (fits #8911 body)

85,-

KJØP
NB!! Denne her erstatter TRX 2925   Traxxas Series 1 battery packs with iD auto battery identification are standard equipment in Traxxas 1/16-scale models. Like all Traxxas Power Cell packs, Series 1 batteries feature heavy-duty construction, flexible silicone-jacketed wires and Traxxas' high current connector for positive plug-in with zero-loss efficiency. 1200mAh capacity NiMH 6-cell 7.2-volt Series 1 Power Cell battery with iD auto battery identification, replacement battery for 1/16 Traxxas vehicles Genuine iD-equipped Power Cell NiMH battery packs make sure you experience all the performance that's been engineered into your Traxxas model Accessory Traxxas iD Auto Battery Identification chargers (sold separately) detect Traxxas iD Power Cell batteries and automatically set and optimize charge settings for unmatched charging safety and simplicity Type     Battery Material     NiMH Colour     Black Width     7.5 cm Height     16 cm Depth     2 cm Weight     152 g

299,-

319,-

KJØP
-6%
Disse passer Traxxas 1/16 biler.   These are Replacement Traxxas Body Clips.          They can be used on Traxxas or most other brands of cars. FEATURES: Metal clips are silver in color INCLUDES: Twelve body clips SPECS:    Length: aprrox. 7/8"  

25,-

35,-

KJØP
-29%
NB: Husk at dette batteriet er beregnet på å bli brukt i ladere med ID-funksjon.   This is the Traxxas Power Cell 7.4V 2200mAh 25C 2S LiPo Battery.     FEATURES Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 16 gauge silicone jacketed wire   INCLUDES Traxxas Power Cell 7.4V 2200mAh 25C LiPo 2S Battery with High  Current Connector and Integrated Balance Connector   REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus  LiPo charging bag   SPECIFICATIONS  Configuration: 2S2P  Continuous Discharge: 25C (55A)  Max Burst Rate: 50C (110A)  Watt Hours: 16.28  Charge Rate: 1C (2.2A)  Max Charge Rate: 2C (4.4A)  Dimensions: 3.5 x 0.83 x 1.2" (88 x 21 x 30mm)  Weight: 4.2oz (118g)

549,-

569,-

KJØP
-4%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png