Hopp til innhold
-9%

Traxxas 5826T Body Ford Raptor Fox Heavy Duty

Art.nr: TRX 5826T

995,-

1.095,-

- 9%
Traxxas

Traxxas

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Body Ford Raptor Fox Heavy Duty

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

The Velineon® VXL-3s Accessory Cooling Fan reduces ESC temperatures during extended operation for maximum power flow. It securely clips onto the VXL-3s heatsink for easy installation. Wires are neatly routed thanks to the integrated connector clip. Simply plug the accessory cooling fan into the Velineon VXL-3s accessory power connector and clip the fan onto the heatsink for increased cooling.  

299,-

329,-

KJØP
-9%
Speed bit handle, large (rubber overmold)

119,-

129,-

KJØP
-8%
Speed Bit Set, hex driver, 3-piece straight (1.5mm, 2.0mm, 2.5mm), 1/4" drive

359,-

379,-

KJØP
-5%
Features: Viscosity 600CPS / 48WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. ●Scope of delivery : 1 bottle /60ml

79,-

KJØP
Høykvakitets Silicone demper olje med viskositet 650. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

KJØP
 This is a pair of Pro-Line Pre-assembled SC Pro-Spec Front Shocks.   FEATURES Fits short course trucks and other 1/10 scale vehicles such as the  Traxxas 2WD and 4WD Stampede, and electric Rustler  12mm Big Bore design with single low friction X ring seal  Pistons and shaft guides constructed of white Delrin  Hard chrome coated 3.5mm shock shaft  Three different piston options 1.4, 1.6 & 1.8, and a blank piston for  drilling to a custom size  Easy access bleeder cap screw  Compatible with the Pro-Line PowerStroke Universal Shock Mounting  Kit   INCLUDES 6308-02 Pro-Spec Delrin Piston & Guide Tree  6308-03 Pro-Spec Plastic Tree  6308-04 Pro-Spec Shock O-Rings  6308-05 Pro-Spec Shock Hardware  6308-06 Pro-Spec Shock Cartridges  6308-07 Pro-Spec Front Shock Shafts  6308-09 Pro Spec Front Shock Bodies  6308-13 Pro Spec Front Yellow Medium Springs   REQUIREMENTS Silicone shock oil of modeler's choice   SPECIFICATIONS  Extended Length: 3.5" (88mm)  Collapsed Length: 2.5" (62.5mm)

995,-

1.095,-

KJØP
-9%
 This is a pair of Pro-Line Pre-assembled SC Pro-Spec Rear Shocks. FEATURES: Fits short course trucks and other 1/10 scale vehicles such as the             Traxxas 2WD and 4WD Stampede, and electric Rustler           12mm Big Bore design with single low friction X ring seal           Pistons and shaft guides constructed of white Delrin           Hard chrome coated 3.5mm shock shaft           Three different piston options 1.4, 1.6 & 1.8, and a blank piston for             drilling to a custom size           Easy access bleeder cap screw           Compatible with the Pro-Line PowerStroke Universal Shock Mounting             Kit   INCLUDES: 6308-02 Pro-Spec Delrin Piston & Guide Tree           6308-03 Pro-Spec Plastic Tree           6308-04 Pro-Spec Shock O-Rings           6308-05 Pro-Spec Shock Hardware           6308-06 Pro-Spec Shock Cartridges           6308-08 Pro-Spec Rear Shock Shafts           6308-10 Pro Spec Rear Shock Bodies           6308-18 Pro Spec Rear Yellow Medium Springs   REQUIRES: Silicone shock oil of modeler's choice   SPECS:    Extended Length: 3.9" (100mm)           Collapsed Length: 2.7" (68.5mm)  

995,-

1.095,-

KJØP
-9%
Denne erstatter TRX 1914X   This is the Front and Rear Body Mounts for the Traxxas Slash 2wd. And Traxxas Body Mount Front/Rear Monster Jam FEATURES: Nylon construction           Black in color INCLUDES: One front body mount           One rear body mount           Two 38mm body posts           Two 26mm body posts           Installation hardware REQUIRES: Installation on the Traxxas Slash

75,-

KJØP
This is a pair of optional Rear Driveshafts                     for the 1/10 scale Traxxas Slash 4x4. FEATURES: Harddened steel construction INCLUDES: Two Rear Driveshafts Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Gleaming nickel-plated shafts and black silicone boots add a custom look.  

799,-

949,-

Ikke på lager
-16%
¤ Disse dekkene passer perfekt til vinterkjøring på 1/10 Slash`ene. ¤ Brukes både foran og bak. ¤ Disse dekkene gir mye bedre feste på vinterkjøring enn orginal dekkene. These are a set of Traxxas 2.8" Mounted All Star Wheels and Tires. FEATURES: 2.8" All Star chrome wheels           Ribbed pattern INCLUDES: Two 2.8" mounted tires, All Star chrome wheels and  inserts REQUIRES: Installation on vehicle SPECS:    Outside diameter: 4" (101mm)           Width:2" (50.8mm)           Inside diameter: 2.8" (71mm)           Hex Size: 12mm COMMENTS: All Star Wheels available separately,  TRX 3772

379,-

KJØP
A shade of orange with lustrous color. These spray paints were especially developed for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint. Paint the body from the inside, keeping the can about 30cm from the surface. After curing, apply another coat. Small details should be brush painted beforehand. These paints are impervious to oil and fuels, so they can be safely used on glow engine R/C car bodies. *Never use these paints on plastic models.

119,-

KJØP
Body accessories kit, 2017 Ford Raptor® (includes grill, hood insert, side mirrors, & mounting hardware)

119,-

KJØP
This is the Traxxas Power Cell 11.1V 5000mAh 25C 3S LiPo Battery.     FEATURES Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 12 gauge silicone jacketed wire   INCLUDES Traxxas Power Cell 11.1V 5000mAh 25C LiPo 3S Battery with High  Current Connector and Integrated Balance Plug   REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus,  LiPo charging bag   SPECIFICATIONS  Configuration: 3S1P  Continuous Discharge: 25C (125A)  Max Burst Rate: 50C (250A)  Watt Hours: 55.5  Charge Rate: 1C (5A)  Max Charge Rate: 2C (10A)  Dimensions: 6.1 x 1.02 x 1.7" (155 x 26 x 44mm)  Weight: 13.3oz (376g)   COMMENTS ALWAYS use a LiPo-approved Charger  ALWAYS use a LiPo Cell Balancer  NEVER Charge over 4.20V per cell  NEVER Charge at currents greater than 1C  NEVER Trickle Charge  NEVER allow to Discharge below 3.2V per cell  NEVER disassemble or modify pack wiring in any way or puncture cells  NEVER place on combustible materials or leave unattended during  charging  ALWAYS Charge in a fireproof location  ALWAYS set charger's output volts to match battery volts  ALWAYS keep out of reach of children

995,-

1.095,-

KJØP
-9%
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-31 Smoke).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
This is a Traxxas 48P, 86T Spur Gear for models with                        Torque Control Slipper Clutch. FEATURES: 48 pitch           86 tooth           Designed for models with a slipper clutch.           Black plastic construction INCLUDES: One spur gear SPECS:    Pitch:   48           Tooth:   86

39,-

KJØP
This is a 23 Tooth 48 Pitch Pinion Gear By Traxxas FEATURES: Pinion gear with set screw, Silver in color INCLUDES: (1) 23 Tooth 48 Pitch Pinion Gear           (1) One 4mmx2mm set screw REQUIRES: Installation SPECS:    Outer Diameter: 14mm (9/16")           Inner Diameter: 11mm (7/16")

39,-

49,-

KJØP
-20%
 This is the stock Battery Hold Down for the Traxxas Stampede 4x4 VXL. FEATURES: Composite construction Holds stock 7-cell battery supplied with vehicle INCLUDES: Two battery Hold Down sections with metal Post and Body Clip REQUIRES: Fastening to chassis COMMENTS: Also available in a different shape to hold taller multi-cell batteries

69,-

79,-

KJØP
-13%
6070-01 | Pro-Line Body Mount Replacement Kit for Slash 2wd and PRO-2 SC Pro-Line PRO-2 SC and Slash 2wd Body Mount Replacement Kit

169,-

179,-

KJØP
-6%
Bumper, front/ bumper mount, front/ adapter (fits 2017 Ford Raptor)

145,-

KJØP
    This is the optional 82 Tooth Spur Gear              for the Pro-Line Performance Transmission FEATURES: Nylon construction           Replaces stock 86 tooth spur gear           Allows gearing to be changed for different track conditions or motor             configurations   INCLUDES: 82 Tooth Spur Gear

68,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png