Hopp til innhold

Traxxas 3770 Alias 2.8" Rear On All-Star Chrome (2)

Art.nr: TRX 3770

379,-

Traxxas

Traxxas

På lager: 4

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

¤ Disse dekkene passer perfekt til vinterkjøring på 1/10 Slash`ene.
¤ Brukes både foran og bak.
¤ Disse dekkene gir mye bedre feste på vinterkjøring enn orginal dekkene.



These are a set of Traxxas 2.8" Mounted All Star Wheels and Tires.


FEATURES: 2.8" All Star chrome wheels
          Ribbed pattern


INCLUDES: Two 2.8" mounted tires, All Star chrome wheels and  inserts


REQUIRES: Installation on vehicle


SPECS:    Outside diameter: 4" (101mm)
          Width:2" (50.8mm)
          Inside diameter: 2.8" (71mm)
          Hex Size: 12mm


COMMENTS: All Star Wheels available separately,  TRX 3772

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Savox SV0220MGPLUS - High Voltage Standard Digital Servo 0.13s 8kg/cm @ 7.4V The Savox SV-0220MG PLUS is a budget-friendly, metal-geared, digital standard servo capable of operating on high voltage. Features: Soft Start Sanwa SSR compatible High Voltage Metal gear train ensures durability and longevity Specifications: Torque @ 6V: 6.5kg/cm Torque @ 7.4V: 8kg/cm Speed @ 6V: 0.16s/60deg Speed @ 7.4V: 0.13s/60deg Dimensions: L40.7 x W20 x H37mm Weight: 59g Operating Temperature: 14° - 122°F (-10° - 50°C) Running Current (no load): 100mA @6.0V, 120mA @7.4V Stall Current (at locked): 1500mA @6.0 V, 1800mA @7.4V Idle Current: 5mA @6.0V, 5mA @7.4V Wire Length: 250 ± 5mm Output Gear Spline: 25 Tooth Bearings: 1BB Operating Travel: 120° (1000 → 2000 µ second) Neutral Position: 1500 µ second Pulse Width Range: 800 → 2200 µ second Maximum Travel: Appx 164° (800 → 2200 µ second) Refresh Rate: 240 Hz Motor Type: Brushed

449,-

499,-

KJØP
-10%
This ESC is designed for use with Tamiya Brushless Motors (Sensored) 15.5 turn and over, (Aftermarket brands 21.5 turn and over), and also brushed motors 23T and over. High point, neutral brake and brake settings are individually adjustable, while battery cut-off, reverse and motor modes can be selected. Setup is shown by an LED, and the ESC also features two protection functions and a cooling fan. ★Maximum continuous current: 75A ★Input voltage: 6.6V - 7.2V ★Dimensions: 41.5mm x 33.4mm x 27mm ★Weight: 56g (including cables) ★With cooling fan • Sensored brushless ESC detects motor rotor positions with precision, enabling more efficient power supply and smoother motor response. • Compatible with Tamiya brushless motors (sensored-type), and Tamiya brushed motors 23 turns and over. • Choose from 10 different settings for both neutral brake and brake, to get your setup just how you want it. • Features overheating and overload protection functions to help ensure that your equipment avoids damage. • Weight: 56g (including cables) • Compatible with Ni-Cd, Ni-MH and Tamiya Li-Fe battery packs. • Dimensions: 41.5 x 33.4 x 27mm • [Basic specifications] Continuous maximum current 75A Output: 100% forward / 50% reverse Input voltage 6.6-7.2V Size 41.5 x 33.4 x 27mm Weight 56g (including cords) Cooling fan is standard equipment. LO/HI Battery Cut-off Information: LOW & HIGH Battery Low Voltage Protection Feature: LOW battery setting cuts off @ 5.6 volts approximately. (Best for Ni-CD, NI-MH and Li-FE battery chemistry) HIGH battery setting cuts off @ 6.2 volts approximately. (Best for other battery chemistries)

995,-

KJØP
These are a set of Traxxas 2.8" Mounted All Star Wheels and Tires. FEATURES: 2.8" All Star chrome wheels Talon Tires For the Rear of the electric Stampede and Rustler INCLUDES: Two 2.8" mounted Talon tires, All Star chrome wheels and inserts REQUIRES: Installation on vehicle SPECS: Outside diameter: 4.6" (119mm) Width: 2.6" (67.6mm) Inside diameter: 2.8" (71mm) Hex Size: 12mm

359,-

KJØP
These are the Traxxas Spring Retainers for Traxxas Shocks.        This set contains the spring retainers that hold the springs in     place over the shock body and the piston heads that control the amount                      of oil flow in the shock cylinder. FEATURES: Constructed of molded plastic.           Contains enough parts for two shocks.           Fits the shocks on most Traxxas nitro and electric powered vehicles.           Two hole piston head for greater dampening or three hole piston head             for softer spring performance. INCLUDES: One Traxxas Spring Retainer Set with:             Two upper and two lower spring retainers             Two 2 hole piston head covers             Two 3 hole piston head covers REQUIRES: Disassembly of shock to install parts.

39,-

KJØP
 This is a pair of Pro-Line Pre-assembled SC Pro-Spec Rear Shocks. FEATURES: Fits short course trucks and other 1/10 scale vehicles such as the             Traxxas 2WD and 4WD Stampede, and electric Rustler           12mm Big Bore design with single low friction X ring seal           Pistons and shaft guides constructed of white Delrin           Hard chrome coated 3.5mm shock shaft           Three different piston options 1.4, 1.6 & 1.8, and a blank piston for             drilling to a custom size           Easy access bleeder cap screw           Compatible with the Pro-Line PowerStroke Universal Shock Mounting             Kit   INCLUDES: 6308-02 Pro-Spec Delrin Piston & Guide Tree           6308-03 Pro-Spec Plastic Tree           6308-04 Pro-Spec Shock O-Rings           6308-05 Pro-Spec Shock Hardware           6308-06 Pro-Spec Shock Cartridges           6308-08 Pro-Spec Rear Shock Shafts           6308-10 Pro Spec Rear Shock Bodies           6308-18 Pro Spec Rear Yellow Medium Springs   REQUIRES: Silicone shock oil of modeler's choice   SPECS:    Extended Length: 3.9" (100mm)           Collapsed Length: 2.7" (68.5mm)  

995,-

1.095,-

KJØP
-9%
The Velineon® VXL-3s Accessory Cooling Fan reduces ESC temperatures during extended operation for maximum power flow. It securely clips onto the VXL-3s heatsink for easy installation. Wires are neatly routed thanks to the integrated connector clip. Simply plug the accessory cooling fan into the Velineon VXL-3s accessory power connector and clip the fan onto the heatsink for increased cooling.  

299,-

329,-

KJØP
-9%
This is a pair of optional Rear Driveshafts                     for the 1/10 scale Traxxas Slash 4x4. FEATURES: Harddened steel construction INCLUDES: Two Rear Driveshafts Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Gleaming nickel-plated shafts and black silicone boots add a custom look.  

799,-

949,-

Ikke på lager
-16%
Denne erstatter TRX 1914X   This is the Front and Rear Body Mounts for the Traxxas Slash 2wd. And Traxxas Body Mount Front/Rear Monster Jam FEATURES: Nylon construction           Black in color INCLUDES: One front body mount           One rear body mount           Two 38mm body posts           Two 26mm body posts           Installation hardware REQUIRES: Installation on the Traxxas Slash

75,-

KJØP
 This is a pair of Pro-Line Pre-assembled SC Pro-Spec Front Shocks.   FEATURES Fits short course trucks and other 1/10 scale vehicles such as the  Traxxas 2WD and 4WD Stampede, and electric Rustler  12mm Big Bore design with single low friction X ring seal  Pistons and shaft guides constructed of white Delrin  Hard chrome coated 3.5mm shock shaft  Three different piston options 1.4, 1.6 & 1.8, and a blank piston for  drilling to a custom size  Easy access bleeder cap screw  Compatible with the Pro-Line PowerStroke Universal Shock Mounting  Kit   INCLUDES 6308-02 Pro-Spec Delrin Piston & Guide Tree  6308-03 Pro-Spec Plastic Tree  6308-04 Pro-Spec Shock O-Rings  6308-05 Pro-Spec Shock Hardware  6308-06 Pro-Spec Shock Cartridges  6308-07 Pro-Spec Front Shock Shafts  6308-09 Pro Spec Front Shock Bodies  6308-13 Pro Spec Front Yellow Medium Springs   REQUIREMENTS Silicone shock oil of modeler's choice   SPECIFICATIONS  Extended Length: 3.5" (88mm)  Collapsed Length: 2.5" (62.5mm)

995,-

1.095,-

KJØP
-9%
Høykvakitets Silicone demper olje med viskositet 650. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

KJØP
Body accessories kit, 2017 Ford Raptor® (includes grill, hood insert, side mirrors, & mounting hardware)

119,-

KJØP
Features: Viscosity 600CPS / 48WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. ●Scope of delivery : 1 bottle /60ml

79,-

KJØP
Speed Bit Set, hex driver, 3-piece straight (1.5mm, 2.0mm, 2.5mm), 1/4" drive

359,-

379,-

KJØP
-5%
Speed bit handle, large (rubber overmold)

119,-

129,-

KJØP
-8%
Body Ford Raptor Fox Heavy Duty

995,-

1.095,-

KJØP
-9%
Traxxas 9558 Driveshaft Front CV (Shaft Only) 5x133.5mm Sledge Driveshaft, front, steel constant-velocity (shaft only, 5mm x 133.5mm) (1)

129,-

KJØP
Traxxas 9557 Driveshaft Rear 5x131mm Sledge Driveshaft, rear (shaft only, 5mm x 131mm) (1) (for use only with #9554 stub axle)

109,-

KJØP
Wing Mount Sledge

79,-

KJØP
Traxxas 9533 Suspension Arm Rear Right Black Sledge Suspension arm, rear (right), black

149,-

159,-

KJØP
-6%
Traxxas 2744X Lock Nut Flanged M3 Black (12) Nuts, 3mm nylon locking, flanged, black (8)

39,-

KJØP
Traxxas 9534 Suspension Arm Rear Left Black Sledge Suspension arm, rear (left), black

159,-

KJØP
Gens Ace 3S 6500mAh - 60C - EC5 Bashing Series 3s 6500mAh - 60C - Gens Ace XT90 Bashing Series levers ferdig med EC5 batteriplug og XH balanseringplugg. Spesifikasjoner: Kapasitet: 6500mAh Spenning: 3S 11.1V Vekt: 418gram Størrelse: 154x46x26mm Strømplugg:    EC5   Specs: - Product Type: Soft Case Lipo Battery Pack - Bashing Series - Capacity: 6500mAh - Voltage: 11.1V - Net Weight: 418g - Dimensions: 154*46*26mm - Balance Plug: JST-XHR, 4 pin - Discharge Plug: EC5 - Charge Rate: 1-3C Recommended   Usage: Gens ace lipo 6500mah 3S1P 60C battery packs are suited for 1/8 SLEDGE, 1:7 FELONY 6S BLX/LIMITLESS/INFRACTION 6S BLX/MOJAVE 6S/Kraton Roller/MOJAVE ROLLER;1:8 TYPHON 6S/3S, KRATON 6S BLX/TALION 6S BLX/OUTCAST 6S BLX/NOTORIOUS 6S;1:10BIGROCK 4x4 3S BLX/OUTCAST/Kraton

949,-

KJØP
Suspension pin set, front & rear (hardened steel), 4x67mm (4), 3.5x48.2mm (2), 3.5x56.7mm (2)/ M3x0.5mm NL, flanged (2)

199,-

KJØP
This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas FEATURES: Black plastic and steel construction INCLUDES: Rear driveshaft assembly           Screw pin REQUIRES: Installation on vehicle

129,-

Ikke på lager
     This is a Sponsor Decal Set for R/C Cars                                 from Traxxas. FEATURES: These decals are designed to be used on any scale lexan R/C car and             truck bodies.           Pressure sensitive, peel and stick vinyl decals.           These are the contingency/sponsorship decals that are used on race             cars.           Logos include: Traxxas, Lunati Cams, Hedman Hedders, Simpson, MSD,             Mr. Gasket, NOS, Accel, Hurst, and more.           Multi-purpose decal set is appropriate for any type of car. INCLUDES: One Sponsor Decal Set. SPECS:    Length: 9-1/8" (23.2cm)           Width:  5-1/8" (13.0cm)

59,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png