Hopp til innhold

Traxxas 5317 Front/Rear Shock Mounts Revo

Art.nr: TRX 5317

75,-

Traxxas

Traxxas

På lager: 1

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is a package of Front and Rear Shock Mounts for the Traxxas Revo.


FEATURES: Black plastic construction


INCLUDES: One front shock mount
          One rear shock mount
          Four chassis wire clips
          Four 3x32mm caphead machine screws
          Four 3x6mm buttonhead machine screws


REQUIRES: Installation onto Traxxas Revo.

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

WL-124017.2017 Front Wheels 2pcs

149,-

På lager 1
KJØP
Charging Bag-B Li-Po 230x295mm VAPEX LiPo-Safe Bag-B 230x295mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended!   Features: Fits many different batteries for most cars, boats & airplanes (including all Traxxas LiPo batteries) Fits inside the storage Bag-E Envelope Style Velcro Flap Size: 230x295mm Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

89,-

99,-

På lager 6
KJØP
-10%
Low Resistance Gold Plating 2U-3U Heat Resistant Housing (-20–200°C) Max load: 100-150A Size (together) : L: 33.5 x W20 x H10 mm Weight: 12.7 g (pair) Bullet Connector Diameter: 5 mm Stripped Wire Max dia: 4.3 mm (10AWG) Package includes: 1 pair of EC5 connectors

55,-

På lager 1
KJØP
Spur gear, 46-tooth, steel (wide-face, 1.0 metric pitch)

219,-

På lager 3
KJØP
Oil, differential (1.000.000 weight) (Typically used for center differential)

149,-

På lager 2
KJØP
Ring gear, differential/ pinion gear, differential

239,-

På lager 2
KJØP
These are the Suspension Pin Retainersfor the Traxxas X-Maxx Monster Truck. FEATURES Molded composite plastic construction Installs with inner suspension pins on upper suspension arms to hold pins in place INCLUDES Four Suspension Pin Retainers Replacement part for these models: Funco® Pro Scale® Sand Car X-Maxx® XRT® Accessory part for these models: Maxx® Slash® Maxx® X-Maxx® Ultimate XRT® Ultimate

35,-

45,-

På lager 4
KJØP
-22%
This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe. Can be used on most common model plastics such as styrol resin, styrofoam and wood. Excellent for either brush or spray painting. Covers well, flows smoothly with no blushing or fading, and can be blended easily. Jar will accept standard airbrush lid. Can be washed away with plain water if done prior to curing. Available in 19 glossy, 45 flat and 7 translucent colors plus an exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Black REQUIRES: Paint Brush or Airbrush to apply to model. Eye, Lung and Skin protection. Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children. Highly Flammable Paint.

30,-

På lager 5
KJØP
This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin,             styrofoam and wood.           Excellent for either brush or spray painting.           Covers well, flows smoothly with no blushing or fading, and can be             blended easily.           Jar will accept standard airbrush lid.           Can be washed away with plain water if done prior to curing.           Available in 19 glossy, 45 flat and 7 translucent colors plus an             exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Semi Gloss Black paint. REQUIRES: Paint Brush or Airbrush to apply to model.           Eye, Lung and Skin protection.           Acrylic Thinner or Water to clean up before paint is cured.

30,-

På lager 3
KJØP
1/2-OFFSET - 4WD FRONT & REAR Fits: Traxxas SUMMIT Front & Rear HPI SAVAGE FLUX HP Front & Rear HPI SAVAGE XL Front & Rear HPI SAVAGE X 4.6 Front & Rear Kyosho Mad Force Kruiser 4WD Front & Rear Kyosho FO-XX VE 4WD Front & Rear Kyosho FO-XX GP 4WD Front & Rear Also fits other 1/8 Scale Monster Trucks with 17 mm hex Also fit these Traxxas Trucks if converted with 17 mm hexes - 425353X, 425353G & 425353R: Traxxas E-REVO Front & Rear TRX56036-1 Traxxas E-REVO Front & Rear TRX56036-4 Also fit these Trucks if you want a wider stance (width): Traxxas E-Maxx Front & Rear (if converting to 17 mm hexes) Traxxas E-Maxx Brushless Front & Rear Traxxas E-REVO Front & Rear (if converting to 17 mm hexes) Traxxas E-REVO Brushless Front & Rear Traxxas REVO 3.3 Front & Rear Traxxas T-Maxx 3.3 Front & Rear (if converting to 17 mm hexes) Arrma Kraton Front & Rear Arrma Talion Front & Rear Arrma Nero Front & Rear Specs: Wheel diameter: 3.8" Tire Diameter: 168 mm Tire Width: 106 mm Weight (each): 467 g Hex: 17 mm Offset: 1/2" Tire Compound: Sport Wheel finish: Black Nylon

549,-

599,-

** Ikke på lager
KJØP
-8%
This is a replacement 40T Spur Gear for the Traxxas Revo.                    This gear meshes with the clutch bell. FEATURES: Black plastic construction INCLUDES: One 1.0 metric pitch 40T spur gear REQUIRES: Nothing.  This is a direct replacement part.

39,-

På lager 1
KJØP
This is a package of six 3x12mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x12mm countersunk screw is required INCLUDES: Six 3x12mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:  12mm           Diameter: 3mm

35,-

På lager 1
KJØP
This is a 48P, 83T Spur Gear for models with                   Traxxas Torque Control Slipper Clutch. FEATURES: 48 pitch           83 tooth           Designed for models with a slipper clutch.           Black plastic construction INCLUDES: One spur gear SPECS:    Pitch:   48           Tooth:   83

39,-

Ikke på lager
Ikke på lager
This is the Motor Plate for the 1/10 scale Rally Race Car from Traxxas. FEATURES: Aluminum construction, anodized blue in color INCLUDES: Aluminum Motor Plate

85,-

På lager 2
KJØP
    This is the Bulkhead Rear                   For the Traxxas 1/10 Rally VXL rally car FEATURES: Made of black plastic INCLUDES: One bulkhead SPECS:    Length: 3"       (76mm)           Width:  2-13/16" (71mm)           Height: 2"       (51mm)

79,-

89,-

På lager 2
KJØP
-11%
  This is the optional 49mm Aluminum Rear Turnbuckle for the                       Traxxas, Rustler and Stampede. FEATURES: Anodized aluminum construction, red in color           Black nylon ball ends INCLUDES: One 49mm red aluminum rear turnbuckle REQUIRES: Installation onto vehicle

69,-

På lager 1
KJØP
NB! Denne erstatter TRX 5480 This is the 17mm Splined Wheel Wrench from Traxxas. FEATURES Nylon construction, black in color  Compatible with the 17mm splined nuts used on many Traxxas vehicles INCLUDES 17mm splined wheel wrench

39,-

På lager 6
KJØP
Bulkhead, front (for use only with #6723R chassis)

65,-

På lager 21
KJØP
Chassis (162mm long battery compartment) (fits flat style battery packs) (use only with #7430R front bulkhead & #6726X battery hold-down)

239,-

På lager 3
KJØP
Spur gear, 72-tooth (0.8 metric pitch, compatible with 32-pitch)

45,-

På lager 2
KJØP
Denne erstatter TRX 7460 Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)

69,-

På lager 2
KJØP
Disse lagerene er samme størrelse som Tamiya 1260 This is a 6X12x4mm Ball Bearing Set from Traxxas. FEATURES: Steel construction           Blue rubber dirt shields INCLUDES: (2) ball bearings, Part #5117 SPECS:    Inside diameter:      6mm           Outside diameter:    12mm           Width:                4mm COMMENTS: This bearing set is used in the transmission and differentials of             the Revo.  

55,-

På lager 6
KJØP
This is the Differential Gear Set for the Traxxas Revo and E-Maxx. And Summit. FEATURES: Steel construction INCLUDES: Two Output Gears           Two Spider Gears           Spider Gear Shaft and Diff Carrier Support           Instruction Sheet REQUIRES: Diff lube;           10K weight TRX 5135           50K weight   TRX 5137                    30K weight TRX 5136           Multi-weight set  TRX 5136X

199,-

219,-

På lager 2
KJØP
-9%
Replacement CAP HEAD SCREWS are designed to be used with Traxxas products requiring this type/size screw. They will also work with other manufacturers products requiring this type/size screw. PACKAGE INCLUDES:    4-Cap-Head Machine Screws (steel) SPECS:    Size: 2.5x12mm COMMENTS:    HEADERCARD STATES (6) PER PACKAGE ***** PACKAGE CONTAINS ONLY (4) SCREWS

29,-

På lager 2
KJØP
This is the Differential Ring Gear and Pinion                  for use with the Traxxas Revo 3.3 and many other Traxxas Cars. FEATURES: Direct replacement part INCLUDES: One differential ring gear           One pinion gear REQUIRES: Traxxas Revo 3.3           2.5x8mm cap head screws TRX 3965

219,-

På lager 10
KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png