Traxxas

Traxxas 5142 Caphead Machine Screws 3x15mm (6)

Art.nr: TRX 5142

39,-

Traxxas

Traxxas

På lager: 1

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

This is a Package of 3x15mm Cap Head Machine Screws with Split Washers.

FEATURES: Silver steel construction.

INCLUDES: Six 3x15mm cap head machine screws
Six 3mm split washers

REQUIRES: These could be used in many other applications requiring this size.

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 6787 Hardware Kit Complete 4x4

Traxxas 6787 Hardware Kit Complete 4x4

Traxxas 6787 - 4X4 Hardware Kit Give your Traxxas model a complete refresh with this replacement hardware kit. Traxxas hardware kits replace the screws and fasteners on your vehicle with new factory-fresh hardware. Individual compartments keep everything organized with a handy label to measure and identify the parts. Not all hardware compatible with BL-2s models. 4X4 HARDWARE KIT FEATURES Black oxide coating for improved rust resistance Tough hex-drive heads Individual box compartments Handy label for identifying hardware

379,-

399,-

-5%

Hovedbilde Traxxas 6888 Center Rear Drive Hub Slash 4X4

Traxxas 6888 Center Rear Drive Hub Slash 4X4

This is the Front and Rear Center Drive Hub Set for use on the Traxxas Slash 4x4 Vehicles. FEATURES: Nylon and steel construction INCLUDES: One Front Center Drive Hub One Rear Center Drive Hub One Screw Pin REQUIRES: Installation in drive assembly

59,-

Hovedbilde Traxxas 9054X Stub Axle Front for Steel Axle #9051X

Traxxas 9054X Stub Axle Front for Steel Axle #9051X

Stub axle, front, steel-splined constant velocity (1)

109,-

Hovedbilde Traxxas 6737 Bumper, rear/ bumper mount, rear

Traxxas 6737 Bumper, rear/ bumper mount, rear

Bumper, rear/ bumper mount, rear

89,-

Hovedbilde Traxxas 4611 Ball Bearings 5x11x4mm (2)

Traxxas 4611 Ball Bearings 5x11x4mm (2)

These are 5 x 11 x 4mm Ball Bearings from Traxxas. FEATURES Ball bearings reduce friction and last longer than bushings. Chrome steel construction. Used to upgrade from bushings. INCLUDES Two 5 x 11mm bearings SPECIFICATIONS Inner Diameter: 5mm Outer Diameter: 11mm Thickness: 4mm

79,-

Hovedbilde Traxxas 4728 Pinion Gear 48P 28T

Traxxas 4728 Pinion Gear 48P 28T

Passer på Traxxas 1/16 biler også. This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas 4-Tec. FEATURES: Ideal replacement part for fine tuning your Traxxas 4-Tec 4WD remote control sedan. Metal construction INCLUDES: One Pinion Gear One Set Screw SPECS: Teeth: 28 Pitch: 48

39,-

Hovedbilde Traxxas 2575 Button Head Machine Screw 3x6mm Revo (6)

Traxxas 2575 Button Head Machine Screw 3x6mm Revo (6)

This is a package of six 3x6mm Traxxas Button Head Screws. FEATURES: Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x6mm button head screw is required INCLUDES: Six 3x6mm Traxxas Button Head Screws REQUIRES: 2mm hex head wrench. SPECS: Length: 6mm Diameter: 3mm

35,-

Hovedbilde Traxxas 6841 Cover Center Driveshaft Slash 4X4

Traxxas 6841 Cover Center Driveshaft Slash 4X4

This is the Center Driveshaft Cover for the Traxxas Slash 4x4 Vehicles. FEATURES: Clear nylon construction INCLUDES: One Center Driveshaft Cover REQUIRES: Installation over driveshaft SPECS: Length: 210mm (8.3") Width: 15mm (0.59")

59,-

Hovedbilde Traxxas 6878A Complete Slipper Clutch 4X4

Traxxas 6878A Complete Slipper Clutch 4X4

This is the Complete Slipper Clutch Set for the Slash 4X4 and Stampede 4x4 from Traxxas. FEATURES: Complete slipper clutch assembly Pre-assembled INCLUDES: 2 nuts 1 spring 1 metal plate 1 pin 3 pads 2 washers 54T spur gear REQUIRES: Installation in vehicle

239,-

Hovedbilde Traxxas 3350R Velineon VXL-3s Brushless Power System

Hovedbilde Traxxas 3350R Velineon VXL-3s Brushless Power System

Traxxas 3350R Velineon VXL-3s Brushless Power System

Waterproof Velineon VXL-3s Brushless Power System (includes VXL-3s ESC, Velineon 3500 motor, and speed control mounting plate (part #3725)) Børsteløst powersett til elektrobiler, på 3 celler yter denne motoren veldig mye og kan fint brukes alene som motor i E-Maxx, E-Revo eller lignende biler. (dette er 1/8 biler) men man bør gire den til ca 55-60 km/t med 3 celler. Som motorsett i 1:10 får dette powersettet lett bilen opp i 100km/h. 3mm aksel. This is the Traxxas Velineon Extreme Brushless Power System for electric powered R/C vehicles. FEATURES: Each component engineered to work wih each other to eliminate restrictions and allow maximum power flow Velineon VXL3s ESC; vAuto-detects and compatible with brushed, brushless and sensored brushless motors Compatible with NiCd, NiMH (4-9 cells) and 2-3 cell LiPo battery packs-two stage low voltage detection for LiPos Three driver profiles-Sport, Race and Training Modes Gold-plated motor connectors Velineon 3500 Brushless Motor; 10-turn 3500kV Optimized for extreme power and efficiency in 1/10 scale vehicles Ultra high temp neodymium magnets, high-speed ball bearings Precision balanced rotor Traxxas High-Current Connector Reverse polarity protection makes backward connections impossible Compatible with high-current 12-gauge wire Gold-plated wide surface terminals Textured surface for easy gripping INCLUDES: Velineon VXL3s ESC, Velineon 3500 Brushless Motor and high-current connector REQUIRES: Installing in vehicle NiCad, NiMH (4-10 cells) or 2-3 cell LiPo battery SPECS: VXL-3s Input voltage: 4.8-11.1V (4-9 cells NiMH or 2S-3S LiPo) Supported motors: Brushed/Brushless/Sensorless brushless Motor Limit: None Continuous current: 200A Peak current: 320A BEC voltage 6.0V DC Transistor type: MOSFET On-resisteance: 0.00075 ohms Max (0.006/8 FETs) PWM frequency: 12,000Hz Battery connectors: Traxxas High-Current Connector Motor connectors: TRX 3.5mm bullet connectors Motor/battery wiring: 12-gauge Maxx Cable Thermal protection: 2-ge thermal shutdown Case size (l/w/h): 2.19" x 1.54" x 1.3" (55 x 39 x 33mm) Weight: 3.17oz (90g) Velineon 3500 Type: Sensorless brushless RPM/volt: 3500 (10-turn) Magnet type: Ultra High-Temperature, sintered neodymium Connection type: TRX 3.5mm bullet connectors Wire Size: 12-gauge Maxx Cable w/ solder tabs Current Ratings: 65A constant; 100A peak/burst Max RPM: 50,000 Diameter: 1.42" (36mm) (540 size) Length: 2.165"(55mm) Weight: 9.24oz (262g)

2.095,-

2.395,-

-13%

Hovedbilde Traxxas 3937 Button Head Machine Screw 4x12mm Revo (6)

Traxxas 3937 Button Head Machine Screw 4x12mm Revo (6)

This is a Traxxas 4X12mm Button Head Screw Set. FEATURES: Steel construction Black in color Low-profile, button-head design Hex drive (allen type) INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS: Overall Length: 12mm (.63") Threaded Length: 11mm (.45") Thread Size: M4x.7mm coarse Hex Wrench Size 2.5mm COMMENTS: Used on the Revo to mount the transmission skid plate.

35,-

Hovedbilde Traxxas 3934 Body Clips (12)

Traxxas 3934 Body Clips (12)

Heavy-duty body clips hold tightly for the intense, high-flying action of our toughest 1/10 scale vehicles. Sold as a pack of 12. FEATURES: Steel construction Natural polished color INCLUDES: Twelve Body Clips SPECS: Length: 26mm

39,-

Hovedbilde Traxxas 2534 Countersunk Machine Hex Drive Screws ...

Traxxas 2534 Countersunk Machine Hex Drive Screws ...

This is a 3x6mm Countersunk Machine Screw Set from Traxxas FEATURES: Steel construction INCLUDES: (6) 3x6mm screws

35,-

Hovedbilde Traxxas 7426X Battery Hold-Downs Tall 1/10 Rally VXL

Traxxas 7426X Battery Hold-Downs Tall 1/10 Rally VXL

This is the Battery Hold-downs and Tall Retainers for the Traxxas 1/10 Rally VXL rally car FEATURES: Made of black plastic. INCLUDES: One battery hold-down One tall front hold-down retainer One tall rear hold-down retainer SPECS: hold-down, length: 7-5/8" (194mm) width: 1-1/4" (32mm) height: 3/8" (10mm) front retainer, length: 46mm (1-13/16") width: 50mm (2") thickness: 8.5mm (5/16") rear retainer, length: 48mm (1-7/8") width: 42mm (1-5/8") thickness: 17mm (11/16") COMMENTS: The tall hold-down retainers allow for the use of taller, multi-cell batteries.

89,-

99,-

-10%

Hovedbilde Absima 650CPS / 51WT Silicone Shock Oil 60ml

Absima 650CPS / 51WT Silicone Shock Oil 60ml

Høykvakitets Silicone demper olje med viskositet 650. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

Hovedbilde Traxxas 3943X Pinion Gear 13T-32P Hardened Steel

Traxxas 3943X Pinion Gear 13T-32P Hardened Steel

Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

Hovedbilde Traxxas 5642 Pinion Gear 13T 32P (5mm axle)

Traxxas 5642 Pinion Gear 13T 32P (5mm axle)

Gear, 13-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

59,-

69,-

-14%

Hovedbilde Traxxas 6727X Battery Expansion Kit Stampede 4X4

Traxxas 6727X Battery Expansion Kit Stampede 4X4

This is the optional Battery Hold Down for the Traxxas Stampede 4x4 VXL. FEATURES: Composite construction Allows installation of taller multi-cell batteries INCLUDES: Battery Hold Down with metal Post and Body Clip REQUIRES: Fastening to chassis COMMENTS: For stock battery holder, order TRX 6727X

75,-

Hovedbilde Traxxas 4974 Wheelie Bar Arm

Traxxas 4974 Wheelie Bar Arm

This is the Wheelie Bar Arm for the T-Maxx 3.3. FEATURES: 4 snap-in adjustment positions to control degree of wheelie action easily removable if additional control isn't needed Constructed of hardened plastic, black in color INCLUDES: Wheelie Bar Arm with four Shoulder Screws REQUIRES: Fastening to chassis COMMENTS: For the 3.3 version only.

119,-

129,-

-8%

Hovedbilde Traxxas 9041 Cover Center Driveshaft Hoss 4x4

Traxxas 9041 Cover Center Driveshaft Hoss 4x4

Cover, center driveshaft (clear)

49,-

Hovedbilde Traxxas 5641 Pinion Gear 11T 32P (5mm axle)

Traxxas 5641 Pinion Gear 11T 32P (5mm axle)

Gear, 11-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

69,-

Hovedbilde Traxxas 9022 Chassis Hoss 4x4

Traxxas 9022 Chassis Hoss 4x4

Chassis Hoss 4x4

239,-

Hovedbilde Sunpadow 3s 5800mAh - 100C - EC5

Hovedbilde Sunpadow 3s 5800mAh - 100C - EC5

Sunpadow 3s 5800mAh - 100C - EC5

3s 5800mAh - 90C - Sunpadow - EC5 3S pakke i praktisk størrelse med mange bruksområder. Spesielt godt egnet til biler som skal ha 3S eller 6S. Leveres med EC5 kontakt og XH-balanseringsplugg. Husk å kontrollere målene slik at du er sikker på at batteriet passer i din bil. Spesifikasjoner: Kapasitet 5800mAh Spenning 3S 11.1V Vekt 415g Størrelse 135x44x35mm Strømplugg EC5 Balanseringsplugg 3S XH

649,-

Hovedbilde Traxxas 6731 Suspension Arms Front/Rear Left/Right (2)

Traxxas 6731 Suspension Arms Front/Rear Left/Right (2)

This is a pair of Left and Right Suspension Arms for the Traxxas Telluride 4x4. FEATURES Plastic construction Fits front and rear suspension INCLUDES One each, Left and Right Suspension Arms

125,-

Traxxas 7434 Body bumper, foam (low profile)

Body bumper, foam (low profile) (use with #7435 front skidplate)

49,-