Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Båt / Traxxas El-båt / Blast / Traxxas 3840 Rubber Grommet for Driveshaft

Traxxas 3840 Rubber Grommet for Driveshaft

Art.nr: TRX 3840

29,-

Traxxas

Traxxas
På lager: 4

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Rubber grommet for driveshaft (stuffing) tube (2)

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 7449 Spring Shock White GTR XX-Long 1.004 Blue ...
Traxxas 7449 Spring Shock White GTR XX-Long 1.004 Blue ...
This is the set of Traxxas Extra Extra Long GTR Shock Springs                       with 1.004 Blue Compression Rate. FEATURES: Steel construction, white in color           Dab of paint on end of spring indicates compression rate INCLUDES: Two Extra Extra Long 1.004 Blue Rate GTR Shock Springs SPECS:    Length: 2.2" (56mm)           Wire Diameter: 0.043" (1.1mm)

59,-

69,-

KJØP
-14%
Hovedbilde Absima 1985WT/50000CPS Silicone Differential Oil 60ml
Absima 1985WT/50000CPS Silicone Differential Oil 60ml
Features: Viscosity 50000CPS / 1985WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities.   Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears.  1 bottle /60ml

109,-

KJØP
Hovedbilde Yeah Racing YB6014B/S10 RC PTFE Bearing (5x11x4mm) ... Hovedbilde Yeah Racing YB6014B/S10 RC PTFE Bearing (5x11x4mm) ...
Yeah Racing YB6014B/S10 RC PTFE Bearing (5x11x4mm) ...
Disse lagerene er samme størrelse som Tamiya 1150 Yeah Racing RC PTFE Bearing (5x11x4mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing (#YB6014BS/10) RC Telfon Bearing (5x11x4mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster.

89,-

99,-

KJØP
-10%
Hovedbilde Yeah Racing YB6016B/S10 RC PTFE Bearing (6x12x4mm)
Yeah Racing YB6016B/S10 RC PTFE Bearing (6x12x4mm)
Yeah Racing RC PTFE Bearing (6x12x4mm) Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6016BS/10) RC Telfon Bearing (6x12x4mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

89,-

99,-

KJØP
-10%
Hovedbilde Yeah Racing YB6026B/S10 RC PTFE Bearing (12x18x4mm)
Yeah Racing YB6026B/S10 RC PTFE Bearing (12x18x4mm)
Yeah Racing RC PTFE Bearing (12x18x4mm) Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6026BS/10) RC Telfon Bearing (12x18x4mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

119,-

139,-

KJØP
-14%
Hovedbilde Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ... Hovedbilde Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ...
Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ...
Yeah Racing RC PTFE Bearing (5x10x4mm) 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6013BS/10) RC Telfon Bearing (5x10x4mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation:   High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)  

79,-

89,-

KJØP
-11%
Hovedbilde Traxxas 3875 Water cooling system
Traxxas 3875 Water cooling system
Water cooling system WATER COOLING KIT: Water cooling is a highly recommended upgrade for the Blast, and mandatory if aftermarket motors are used. The cooling system consists of tubing which picks up water from underneath the boat, circulates it through coils wrapped around the motor, and then exits it through the side or rear of the boat

169,-

KJØP
Hovedbilde Traxxas 1540 Rubber Grommet for Steering Rod (2)
Traxxas 1540 Rubber Grommet for Steering Rod (2)
Rubber grommets for steering rod (2)

39,-

KJØP
Hovedbilde Traxxas 5733 Propeller 42x59mm Spartan
Traxxas 5733 Propeller 42x59mm Spartan
This is the stock 42x59 Propeller for the Spartan Boat from Traxxas. FEATURES: Black nylon construction INCLUDES: One 42x59 propeller REQUIRES: Installation on propeller shaft SPECS:    Shaft Diameter: 4mm

59,-

KJØP
Hovedbilde Traxxas 5759 Water Cooling Tubing 1m Spartan
Traxxas 5759 Water Cooling Tubing 1m Spartan
 This is a package of Water Cooling Tubing for the Traxxas Spartan. FEATURES: Silicone construction, blue in color INCLUDES: One 3' length of fuel tubing SPECS:    Inside diameter:  .101" (2.5mm)           Outside diameter: .212" (5.5mm)           Length: 1m (39")

69,-

KJØP
Hovedbilde Traxxas 5722 Battery Straps Spartan (4)
Traxxas 5722 Battery Straps Spartan (4)
These are the Battery Straps for the Spartan Boat from Traxxas FEATURES Black color velcro strap INCLUDES 4 battery straps SPECIFICATIONS Length: 9" (228mm) Width: .62" (16mm)

79,-

KJØP
Hovedbilde Traxxas 1529X Propeller Shaft 3/16
Traxxas 1529X Propeller Shaft 3/16
Propeller shaft (1), for 3/16" ID propellers/ drive dog (1)/ 4.0 GS (1)/ 4x8mmTW (2)/ 4.0 NL (1). (2 sets req. for Villain EX) 3/16" PROP SHAFT: The 1529X prop shaft uses a 4mm shaft with a drive dog and 3/16 threads to install aftermarket beryllium or aluminum props. Typical aftermarket props from manufacturers such as Octura, Graupner, and Prather use the standard 3/16 thread size for props that will fit the Nitro Vee. Two of these are required for the Villain IV and Villain EX. Also works great on the Blast and Nitro Vee (only one required).

85,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png