Hopp til innhold

Traxxas 3722A Lower Chassis Gray

Art.nr: TRX 3722A

179,-

Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

    This is a Grey Lower Chassis for the Traxxas Electric Rustler Series and Bandit.

FEATURES: Constructed of composite plastic

INCLUDES: One Traxxas Grey Lower Chassis

REQUIRES: Installing all components onto chassis

SPECS:    Length:   13.5" (343mm)
          Width:     5.3" (135mm)
          Thickness: 0.08"  (2mm)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 3722
Copied
     Denne er erstattet med TRX 3728    This is a Black Lower Chassis for the Traxxas Electric Rustler Series and Bandit. FEATURES: Constructed of composite plastic INCLUDES: One Traxxas Black Lower Chassis REQUIRES: Installing all components onto chassis               SPECS:                                  Length:   13.5" (343mm)                Width:     5.3" (135mm)                 Thickness: 0.08"  (2mm)

Art.nr: TRX 3722R
Copied
  Lower chassis (grey) (166mm long battery compartment) (fits both flat and hump style battery packs) (use only with #3725R ESC mounting plate)

179,-

KJØP
Art.nr: TRX 3722X
Copied
Denne er erstattet med TRX 3728 Lower chassis (black) (166mm long battery compartment) (fits both flat and hump style battery packs) (use only with #3725R ESC mounting plate)

Art.nr: BULK TRX 3722A
Copied
 *** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "Bulk" Traxxas 3722A Lower Chassis Gray    This is a Grey Lower Chassis for the Traxxas Electric Rustler Series and Bandit. FEATURES: Constructed of composite plastic INCLUDES: One Traxxas Grey Lower Chassis REQUIRES: Installing all components onto chassis SPECS:    Length:   13.5" (343mm)           Width:     5.3" (135mm)           Thickness: 0.08"  (2mm)

179,-

Ikke på lager

Kunder kjøpte også

Traxxas 3729-BLK Upper Chassis Black Bandit/Rustler

79,-

KJØP
Traxxas 3728 Lower Chassis Black (Long Battery) Bandit/Rustler

189,-

KJØP
Gear, 14-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw   For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

99,-

KJØP
-10%
 These are the Traxxas Countersunk 4 x 12mm Screws. FEATURES: Metal construction           Black in color INCLUDES: Six 4 x 12mm Countersunk Flathead Hex Screws REQUIRES: Installation on the vehicle

35,-

KJØP
Screws, 3x10mm flat-head machine (hex drive) (4)

25,-

KJØP
Gear, 15-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

KJØP
  Wheels, 1.9", chrome (2)/ center caps (2)/ decal sheet (requires #8255A extended stub axle)

179,-

KJØP
This plastic shock set includes 4 CVA oil-filled dampers and medium black springs. The short black springs are denoted with a yellow paint mark to denote its medium spring rate for easy identification. When fitted onto any of Tamiya’s TT-01 or TT-02 chassis machines, they will improve stability and help the car hold uneven surfaces. This set is ideal for beginners or first-time upgraders! Contains parts to make 4 CVA Super Mini oil shock dampers. Includes 4 black (medium) springs denoted with a yellow paint mark.

279,-

319,-

KJØP
-13%
DEANS MALE WITH CAP END (ESC END) (5PCS)

65,-

KJØP
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** This is a Traxxas Grey Upper Chassis for the Traxxas Electric Rustler series. FEATURES: Grey plastic construction           Molded in servo mount and bellcrank post INCLUDES: One upper chassis SPECS:    Length:                4.94"         (125mm)           Width:                 2.91"         ( 73mm)           Height:                1.25"         ( 31mm)

49,-

59,-

Ikke på lager
-17%
Bronto XT60 w/cap - 3x Female - Praktisk koblingslokk - Pakke med 3 kontakter Pakke med 3 stykk Bronto XT60 med koblingslokk. Typen som benyttes på batterisiden av koblingene. Pluggen er utstyrt med koblingslokket som gjør at du slipper krympestrømpe på ledningene. Før ledningene gjennom koblingslokket og lodde de fast i kontakten. Koblingslokket klipses så fast i kontakten og du er ferdig.

49,-

KJØP
Bumper, front/ 4x12 CCS (2) (fits 2WD Rustler® or Bandit®) (for LED light kit installation)

79,-

KJØP
Traxxas 9116 Side Marker Lenses and Housing Blazer ´69 and ´72 Marker light housing (4)/ marker light mount (4)/ marker light lens (red (2), amber (2))/ reverse lens (left & right)/ 1.6x5 BCS (self-tapping) (8)

99,-

109,-

KJØP
-9%
7.2V 4000 mAh NiMH Stick-Pack Battery with Tamiya Connector Specs: Battery: 6-cell 7.2V NiMH Stick Pack Capacity: 4000 mAh Connector: Tamiya Wires: 14AWG Fast Charge: 4A Peak Slow Charge: 400mAh 12-16 hours Size: L135 x W46.5 x H24 mm Weight: 379 g

369,-

KJØP
Mounting plate, electronic speed control (for installation of XL-5/VXL into Bandit or Rustler®)

39,-

KJØP
  This is the Traxxas #3727 Rustler Battery Hold-Down Plate, Metal Post and Body Clip replacement parts for the Rustler truck. INCLUDES:  1  Black plastic hold-down plate,  (2 5/8" long, 3/8" wide and                  has 2 holes that attach to the posts).            2  Metal posts  (Aluminum with a hex shaped top and hole                  for the body clip, threaded on bottom).            2  Steel body clips.   COMMENTS: Body clips are bent for easier installation.    

39,-

KJØP
Bronto Ladekabel - 4mm til T-Plug (Deans)   Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 14AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med Deans plugg til 4mm bananplugger. Benyttes for lading av batterier med Deans-plugg, og kobles rett i ladere med 4mm tilkobling.   Spesifikasjoner Ledning 14AWG Lengde 30cm Tilkobling 1 4mm Banan Tilkobling 2    T-plug (Deans) male

75,-

KJØP
Shock shafts, steel, chrome finish (X-long) (2)

39,-

KJØP
This is the replacement front shock shafts for the Traxxas LSII. Includes: 2- front shock shafts.

39,-

KJØP
This is the All-Star 2.8" Black Chrome Rear Electric Wheels          for the Traxxas Stampede  and Rustler. FEATURES: Black chrome wheels INCLUDES: Two All-Star 2.8" rear black chrome wheels REQUIRES: Installation on the vehicle SPECS:    Overall Diameter: 2.8" (71mm)           Width: 1.92" (49mm)

99,-

KJØP
This is the set of Traxxas 2.8" Mounted All Star Wheels and Tires                         for the Rustler VXL, TRAC88**. FEATURES: 2.8" All Star black chrome wheels           Ribbed pattern INCLUDES: Two 2.8" mounted nitro rear/electric front tires, All Star chrome             wheels and foam inserts REQUIRES: Installation on vehicle SPECS:    Outside diameter: 4.13" (105mm)           Inside diameter: 2.8" (71mm)           Width: 2.04" (52mm)           Hex Size: 12mm

369,-

Ikke på lager
  MT-MCROSS Truck Tires on 2.8" Wheels with 0" Off-set (Traxxas® Bead Wheels) This is a pair of truck tires mounted on chromed nylon 2.8" wheels with 0" off-set (with Traxxas@ Style 2.8" Bead). The MT-MCROSS tires can take you anywhere and feature an MX style tread pattern that is perfect for back-yard racing on any rough surfaces and conditions. The MT-MCROSS is perfect for your 1/10 Monster Truck such as Traxxas Stampede or Arrma Granite. But they also fits Stadium Trucks such as Traxxas Rustler and Arrma Vorteks if you want a bigger and wider tire that can handle anything you put ahead of it. Fits: Traxxas STAMPEDE 2WD Rear Traxxas STAMPEDE VXL 2WD Rear Traxxas RUSTLER 2WD Rear Traxxas RUSTLER VXL 2WD Rear Traxxas SKULLY 2WD Rear Traxxas CRANIAC 2WD Rear Arrma Vorteks Mega 2WD Front & Rear Arrma Vorteks BLS 2WD Front & Rear Arrma Granite Mega 2WD Front & Rear Arrma Granite BLS 2WD Front & Rear Team Durango DEST210 2WD Front & Rear Kyosho Rage 2WD Front & Rear Kyosho Mad Bug 2WD Front & Rear Also fits other 1/10 Scale Monster Trucks with 12 mm hex Specs: Wheel diameter: 2.8" Tire Diameter: 126.5 mm Tire Width: 71.5 mm Weight (each): 172 g Hex: 12 mm Offset: 0" Tire Compound: Soft Wheel finish: Chrome Nylon

329,-

359,-

KJØP
-8%
Passer til:   Stampede 4x4 Bandit Rustler Stampede Slash 4x4 og Slash Ultimate E-Maxx E-Revo 1/10 Slash 2WD Summit 1/10 Antall celler : 2 (7,4volt) Kapasitet : 5800mAh Strøm ledning tykkelse : 12 AWG Balanseringsplugg : JST-XH Max ladestyrke : 2C (10 amp) Kontinuerlig utlading: 25C (145A) Max utladning : 50C (290A) Lengde: 13,50 cm (med ledningen 14,00 cm) Bredde: 4,27 cm Høyde : 2,44 cm Vekt : 312 gram

819,-

899,-

KJØP
-9%
This is the Traxxas replacement #3631 Front Suspension Arms for for the Stampede and Rustler. FEATURES:    Made from black molded nylon    For the Traxxas Stampede and Rustler. SPECS:    Length: 3 1/4"    Thickness: 3/8"    Width at end near chassis: 1 1/2"    Width at end near wheels: 7/8" INCLUDES:    (2) Front suspension arms for the Traxxas Stampede.

99,-

KJØP
These are REAR nylon rims for the Traxxas electric Rustler, electric Stampede, and any other Traxxas vehicles which use a hex-style drive washer.  These will NOT work on the Nitro Rustler or Nitro Stampede--use TRX 1972 on those. * Includes: (2) white  nylon rear rims (aka wheels) * Features: dyeable white nylon construction           8-hole design           hex-drive hub system (drive hubs not included- TRX 1654) * Specs: 2.2" diameter        1.9" width * Comments: The front set of rims is TRX 3675. The only difference between these           two rims is the internal offset is greater on the rears.

55,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png