Hopp til innhold

Traxxas 3644R Turnbuckle Complete Alu Red Camber Link 73mm (2)

Art.nr: TRX 3644R

419,-

Traxxas

Traxxas

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Camber links, rear (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

RPM 70982 - Front Bumper & Skid Plate for Traxxas Sledge Quick Notes: Includes a longer and wider skid plate Front bumper width is 6-3/4″ (171.5mm) wide Replaces the bumper and skid plate from stock Traxxas #9535 he RPM Front Bumper and Skid Plate for the Traxxas Sledge is a unique design that works with the Sledge’s body mounting mechanism. Traxxas designed the body mounting system to move forward instead of rearward. Because it moves forward by well over 1” (25mm), it severely limits bumper design. However, RPM engineers found a way to incorporate a fully functioning bumper with this unique body mounting system. How did we do it? First, we eliminated the stock bumper and replaced it with a hinge pin retainer, since realistically, that’s all the stock bumper really is. Next, we eliminated the stock skid plate in favor of a wider, longer and more protective skid. Lastly, we bolted a unique bumper to the front of the skid plate. Our system sits below the body, which allows the body mounting system full range of motion, yet the Sledge finally has some tough, RPM front end protection. Each component is molded in black from our exclusive blend of engineering grade nylons for unmatched strength and durability. All RPM molded products are made in the USA and backed by our limited lifetime warranty against breakage. Tech Notes: The RPM Front Bumper and Skid Plate is designed specifically for the Traxxas Sledge and replaces the bumper and skid plate from stock Traxxas #9535.

269,-

KJØP
Traxxas Rustler 4X4 LED Light Kit The Traxxas Rustler 4X4 takes stadium truck performance to new heights and now there’s an LED light kit to extend the fun after sunset. High-intensity LEDs come pre-installed and integrated in a new front bumper and roof skid made from our toughest composite material. The two forward facing bright-white LED light bars and rear red light bar are regulated by the included chassis-mounted power supply. Built Traxxas Tough and fully waterproof, the Rustler 4X4 LED light kit adds a fun new dimension to the Rustler 4X4 experience. Features: Efficient, high-intensity LED lighting Front bumper with integrated LED lights Roof skid with integrated front (white) and rear (red) light bars Regulated power supply for stable lighting performance Easy installation with included power tap connector Includes mounting hardware

579,-

599,-

KJØP
-3%
Suspension arms, front (red) (2) (heavy duty, cold weather material) New Heavy-Duty Suspension Arms Get valuable add-on sales and allow your customers the option to customize their Traxxas trucks with new heavy-duty suspension arms. Available in six dynamic colors, the suspension arms use our toughest composite material to stand up to the most punishing drivers and resist breakage even in cold weather. Designed for the Extreme Traxxas heavy-duty suspension arms feature an all-new design which takes advantage of a proprietary composite material that is designed specifically for high loads and hard landings. Whether you’re sending it at the skate park, or preparing for the next speed run, these arms were built for the extreme. Accessory part for these models (front): Rustler Rustler VXL Stampede Stampede VXL Bigfoot Slash Slash VXL Ford F-150 Raptor

119,-

KJØP
These are the Traxxas 61mm Turnbuckle Toe Links  for the Traxxas Stampede.     FEATURES Metal and Nylon Construction  Silver and Black in Color  Assembled w/Rod Ends   INCLUDES Two 61mm (96mm center to center) turnbuckles   REQUIREMENTS Installation on the vehicle

99,-

KJØP
This is the Diff Oil Kit for the Revo by Traxxas. FEATURES: Three bottles of oil (10K,30K,50K weights). INCLUDES: Three 2oz (59ml) bottles of oil           Three pour spouts

249,-

KJØP
Charging Bag-B Li-Po 230x295mm VAPEX LiPo-Safe Bag-B 230x295mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended!   Features: Fits many different batteries for most cars, boats & airplanes (including all Traxxas LiPo batteries) Fits inside the storage Bag-E Envelope Style Velcro Flap Size: 230x295mm Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

89,-

99,-

KJØP
-10%
Drag link, machined 6061-T6 aluminum (red-anodized)

119,-

129,-

KJØP
-8%
Camber links, front (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1)

439,-

459,-

KJØP
-4%
Driveshaft, center, 6061-T6 aluminum (red-anodized)

125,-

KJØP
Battery Charge Indicator Plugs The #2943 Traxxas Battery Charge Indicator Plugs make it easy to manage the charge status of your batteries. Use green for fully charged batteries, blue for LiPos that are charged for storage, and grey to indicate discharged batteries. These plugs also help protect the battery plug terminals from accumulating dirt, corrosion, or foreign material during storage and transport. Each package includes 12 indicators: 4 green (charged), 4 grey (discharged), and 4 blue (storage charged)  

59,-

KJØP
This is a pair of Bulkhead Tie Bars for the Traxxas Slash 4X4.     FEATURES Aluminum construction, red in color   INCLUDES Two Front and Rear Bulkhead Tie Bars

85,-

KJØP
This is the optional Pro-Line Extended Body Mount Kit for the               1/10 scale Traxxas Slash 4x4 Short Course Trucks. FEATURES: Adjustable front and rear body mounts allow a wide variety of bodies             to be used including rally car bodies           Constructed of nylon, black in color           Screw-on body mount system eliminates metal clips INCLUDES: Front and Rear Body Mounts and Posts with Mounting Hardware

279,-

KJØP
This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application. Includes: 1- tube of grease (approximately 1 oz.)

29,-

Ikke på lager
Camber links, front (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)

439,-

459,-

KJØP
-4%
New TRX-4 1/10 Scale And Trail Crawler Take the Path Less Traveled. The Traxxas TRX-4 Scale and Trail Crawler is an all-new Traxxas design that instantly obsoletes the status quo with greatly expanded features, versatility, and capability. In other words, we built it the Traxxas way, rugged, powerful, and ready for fun!  Check out the features and images below to get the latest scoop on this incredible machine. Ultimate Ground Clearance The TRX-4 Scale and Trail Crawler is equipped right out of the box with Traxxas' game-changing portal axle set. Portal axles lift the truck at the wheels for huge center pumpkin ground clearance. In order to achieve the same clearance with straight axles (and not get stuck), your tires would have to be over an inch taller than the TRX-4's tires. Straddling boulders with ease, the TRX-4 chassis definitely takes the path less travelled and simply leaves all the others behind. Torque Twist Eliminated The portal axles use gear reduction right at the wheels that dramatically reduces undesirable torque twist. Total axle gear reduction is over twice non-portal designs. The Titan 550 motor torque is translated into straight, powerful, forward motion, rather than wasted energy twisting your rig right off the rocks. Improved Geometry Portal axle geometry raises the axle link mounts and center driveshaft, greatly reducing critical driveshaft and suspension link angles. This means less strain on the driveshafts, and the higher suspension links provide greater clearance with less scraping and dragging across the rocks. The steering drag link and tie rod are also raised up and out of harm's way. Rigid Steel Frame A heavy-duty formed-steel ladder frame with molded cross members creates an extremely rigid backbone that lets the suspension do the work it was designed to do. You’ll feel the difference on trails where the elimination of chassis flex allows for precise wheel placement when navigating technical terrain. Remote Locking Differentials Traxxas gives you the versatility to lock and unlock the front and rear differentials to suit your driving needs directly from your transmitter. Leave the differentials unlocked for relaxed driving on the trail with smooth, tight turning and better handling at high speeds. When the trail gets technical, lock the front and rear differentials, or just the front, for superior grip over extreme terrain. Our patented design has been proven rugged and capable in the Traxxas Summit. New sleeved micro cables control the differential action for scale appearance, without limiting the huge suspension articulation. 45° Steering Angle Traditional crawlers sacrifice turning radius for traction. The TRX-4’s remote locking differentials disengage to take full advantage of its superior 45 degree steering angle. Once you clear the obstacle, re-engage the differentials for ultimate traction. Hi/Low Range Transmission When the going gets tough, use your transmitter to shift into low range for incredible 4-wheel drive pulling torque. Shift into high range for blasting down the trail. The plush suspension design absorbs rough terrain with ease and delivers outstanding scale appearance. Unmatched versatility makes the TRX-4 Scale and Trail Crawler adaptable to just about any situation or driving style. Metal Gear Digital Servo A new full-metal gear digital servo gives you the durability and steering authority you need to confidently and reliably power through tough situations. Waterproof Traxxas was the first to bring you fully waterproof RC vehicles years ago with our innovative designs. The TRX-4 Scale and Trail Crawler is fully waterproof for how you like to really play, not “splash resistant.” There is a big difference. Traxxas’ patented innovation gives you the freedom to tackle creeks, snow, and mud without worrying about water in your electronics. Scale Detail The TRX-4 Trail and Scale is being shown with the legendary Land Rover Defender body, complete with exciting scale details for an authentic 4-wheelin’ experience. We’ve included a functional spare wheel and tire, an off-road jack, and spare fuel canisters. Secure your trail gear in the included roof basket. There’s even a snorkel for taking the waterproof TRX-4 through creek crossings. The rugged bumpers provide clearance and protection and are equipped with recovery D-rings. The front bumper is designed to be compatible with many popular off-road accessories. Inner Fenders The scale details did not stop with the body. We went underneath to install detailed inner fenders that integrate with the scale look of the floor pans and shock towers, keeping rocks, mud, and twigs out of the chassis. The inner fenders are also equipped with pockets to install our optional LED rock light kit (sold separately) to light up the night trail, casting light right where it’s needed. The rock lights make changing a “flat tire” on the trail a breeze! ;-) Integrated rock sliders help protect the body from damage. Cruise Control The Traxxas TQi radio system is equipped with cruise control for long-distance treks. Set your speed using the transmitter and then use the multi-function knob to fine-tune it faster or slower to precisely match the pace of your caravan of trail explorers. Cruise control makes it easy and comfortable for the TRX-4 Scale and Trail Crawler to be your companion for hours of driving fun and exploration. 3S Power System The new XL-5 HV electronic speed control brings 3S LiPo capability for stronger, more efficient running. New speed control profiles have been added for smooth and precise control. A new Trail profile facilitates smooth driving for most of your adventures, while a new Crawl profile introduces hill hold and instant reverse for extremely technical courses. Either will help you navigate obstacles with ease, right from the start. Long run times, up to 2 hours, are possible with a Traxxas 3S 5000mAh iD LiPo battery pack! Canyon Trail 1.9" Tires The 1.9" Canyon Trail tires and tuned foam inserts are super-soft and grippy to deliver superior bite on rocky surfaces with convincing scale realism. The 12 mm steel hex drive makes the TRX-4 chassis compatible with popular 1.9" wheel and tire combinations. Traxxas Tough Leave the tools in the bag! The Traxxas TRX-4 chassis is built to handle the rigors of remote locations and all-day driving fun. The foundation begins with a pair of 1.5 mm thick steel frame rails. Large diameter steel links and heavy-duty, extra-wide rod ends keep the suspension firmly mounted. Hardened steel CV-style half-shaft joints are ultra reliable, while the brushless-ready steel portal axle and transfer case gears are smooth and quiet. Traxxas’ composite materials have been refined over three decades for the ultimate in strength and durability. Aluminum GTS Shocks All new oil-filled coil-over GTS shocks were created exclusively for the TRX-4 chassis. These silver-anodized aluminum units deliver silky-smooth damping performance and feature threaded shock bodies for easy ride height adjustments. The convincing scale realism looks great and they perform even better with an O-ring cap seal and dual X-ring shaft seals. Extreme Capability Steep approach angles front and rear allow the TRX-4 Scale and Trail Crawler to tackle big obstacles head on. The front motor design biases weight forward for superior climbing ability compared to other designs. More Details Coming Soon Photos and specifications subject to change. Officially Licensed Product. Land Rover Trademarks used under license to Traxxas, LP. Pending licensing approval.

7.495,-

Denne er erstattet med TRX 8095 Hit the trail day or night with rock-solid reliability Genuine Traxxas Complete LED Light Kit for the TRX-4 are engineered with the same outstanding quality and attention to detail as the truck itself. Precise Traxxas fit and finish makes installation easy and fun for any skill level, and the waterproof design allows for all-weather adventure after the sun goes down. Sealed waterproof design Engineered by Traxxas for direct fit on the Land Rover Defender body with tidy and secure wire management 3-in-1 wire harness operates all lights with a single connection between body and chassis Traxxas LED lighting module: Regulated to provide consistent and reliable power output with batteries from NiMH to 3S LiPo Eliminates overheating, glitching, and other electronics issues common with unmatched aftermarket systems Integrated High/Low brightness switch provides two output levels for the RIGID® Light Bar and the headlights LED Light Bar with High/Low Brightness Switch Designed to the rigorous standards of both Traxxas and leading lighting manufacturer RIGID®, the LED light bar utilizes surface mount LED technology and a custom clear lens for unsurpassed realism. The integrated switch controls the brightness of both the light bar and the headlights. The light bar bolts directly to the Land Rover Defender ExoCage, but the universal mounting tabs also allow easy custom installation on a variety of surfaces. LED Headlight and Tail Light Harness Designed specifically for the Land Rover Defender body, the LED headlight and tail light harness is a direct replacement for the factory lens components. Fourteen total bright white LEDs bring the headlights to life, while secondary lights illuminate the amber parking lights and red tail lights for a true scale look. Available in: #8030 and #8027 Light up the trail with LED Rock Lights Traxxas LED Rock Lights install directly into the inner fenders of the TRX-4 and are positioned to help illuminate obstacles for trouble-free nighttime crawling. The kit includes two LED modules per wheel, ensuring a flood of light throughout the underside of the truck. Down lighting in the wheel wells combined with the headlight/taillight kit make it easy to see the orientation of the vehicle in the dark. Available in: #8030 and #8026 Lighting Module Provides Stable Power Pack After Pack Adding LED lighting components to your TRX-4 is simple with the Traxxas waterproof power supply. This unit provides stable, regulated output with batteries ranging from NiMH to 3S LiPo. The power supply connects to the receiver and electronic speed control to provide single-point control of your lighting components. The lights turn on when the receiver is powered on. The included 3-in-1 wire harness allows the full lighting setup to be connected with a single plug.

KONTAKT
 This is a pair of Long GTR Shock Shafts from Traxxas. FEATURES: Fits the front shocks of the LiPo equipped Traxxas Slash 4x4 Ultimate           TiN (titanium nitride) coating for smooth operation INCLUDES: Two Long GTR TiN coated Shock Shafts

129,-

KJØP
This is a Rod End Set for the Traxxas Revo                     used with the optional GTR shocks. FEATURES: Plastic construction           Black in color INCLUDES: Six Rod Ends REQUIRES: Assembly to vehicle SPECS:    Length:              18.35mm (0.72")           Width at ball joint: 10.35mm (0.40") COMMENTS: If Pivot Balls are needed, use TRX 5355.

25,-

KJØP
This is the Front Hardened Steel Drive Hub for use on the Traxxas Slash 4x4. FEATURES: Hardened steel construction INCLUDES: One Drive Hub           One Screw Pin REQUIRES: Installation on the vehicle SPECS:    Length: 19mm (0.75")           Diameter: 12mm (0.47")

59,-

KJØP
This is a Traxxas M0.8P, 50T Spur Gear. FEATURES: M0.8 pitch           50 tooth           Black plastic construction           Compatible with 32P pinion gears INCLUDES: One M0.8P, 50T Spur Gear SPECS:    Pitch:   M0.8           Tooth:   50           Outer Diameter: 41.5mm (1.63")           Inner Diameter: 11mm (0.43")

39,-

KJØP
Body clips, heavy duty (black) (12)

39,-

49,-

KJØP
-20%
Traxxas 5000mAh 7.4v 2-Cell 25C Short LiPo Battery TRAXXAS CERTIFIED LIPO POWER! Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available. Specs: Type: LiPo Total Capacity: 5000 mAh Voltage: 7.4 V (2S) C Rating: 25 Length: 137 mm Height: 24 mm Width: 43 mm Weight: 280 g

649,-

749,-

KJØP
-13%
Toe links (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4)/ aluminum wrench (1)

439,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png