Traxxas 10142 Latch Body Mount Front Raptor R

Traxxas 10120 Grille/ grille mount/ 3x10 BCS (7) (fully assembled, includes installed headlight lenses and decals) (fits #10111 body) Raptor R™ front grille with 3x10 mm screws (7) (fits 10111-series bodies) Replacement part for these models: Ford® F-150® Raptor R™ 4X4

På lager 2

Traxxas 10143 - Side Mirrors Side mirrors (left & right)/ mirror mounts (left & right)/ 3x14mm BCS (2) (attaches to #10111 body) Left and right Raptor R™ replica side mirrors. Includes 3x14 mm screws (2) (fits 10111-series bodies) Replacement part for these models: Ford® F-150® Raptor R™ 4X4

På lager 2

Traxxas 10144 Latch, body mount, rear/ rear latch mount (2)/ 3x8mm BCS (4) (for clipless body mounting) (attaches to #10111 body) Rear clipless body mounts and latches with 3x8 mm screws (4) (fits 10111-series bodies)

På lager 2

Traxxas 10121 - Tailgate Trim Tailgate trim/ trim mount/ 3x10mm BCS (7)/ decals (attaches to #10111 body) Raptor R tailgate trim with 3x10 mm screws (7) (fits 10111-series bodies) Replacement part for these models: Ford® F-150® Raptor R™ 4X4

På lager 3

These are the Traxxas Spring Retainers for Traxxas Shocks.        This set contains the spring retainers that hold the springs in     place over the shock body and the piston heads that control the amount                      of oil flow in the shock cylinder. FEATURES: Constructed of molded plastic.           Contains enough parts for two shocks.           Fits the shocks on most Traxxas nitro and electric powered vehicles.           Two hole piston head for greater dampening or three hole piston head             for softer spring performance. INCLUDES: One Traxxas Spring Retainer Set with:             Two upper and two lower spring retainers             Two 2 hole piston head covers             Two 3 hole piston head covers REQUIRES: Disassembly of shock to install parts.

På lager 11

Charge Two Batteries at Once 8-amp Output in Our Fastest, Most Powerful Charger! Charging Solved! Simple. Fast. Just plug in a pair of Traxxas iD batteries and press Start. Traxxas’ exclusive iD technology eliminates complicated charger programming by automatically configuring and optimizing the charge settings for Traxxas iD batteries. The EZ-Peak Dual charges two batteries simultaneously at up to 50 watts (4-amps) each, or switch to High-Output mode to charge a single battery at the maximum 100 watt (8-amps) output. Charging faster means more fun time behind the wheel. You can even charge a NiMH and a LiPo at the same time! The progress bar and audible alerts keep you informed while the advanced high resolution peak detection delivers a perfect charge every time. The EZ-Peak Dual’s Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. Our Most Powerful Charger Faster charging means you get to spend more time behind the wheel. The EZ-Peak Dual puts out a full 100 watts of power that equates to 8-amps of charging horsepower. It’s a twin turbo-equipped charger. Traxxas iD LiPos (4000mAh or higher) charge nearly 2x faster in High Output Mode. The EZ-Peak Dual isn’t just for iD LiPos; the Multi-Chemistry nature of the charger means LiPos and NiMHs can be charged at the same time. Advanced Mode opens the door for backwards compatibility. This allows EZ-Peak Dual to charge any Traxxas Power Cell battery equipped with a first-generation Traxxas High-Current Connectors and Traxxas iD batteries independently or simultaneously. There are two balance ports built into the charger for Traxxas LiPo batteries equipped with external balance leads. Take full advantage of the 8-amp output and experience the pinnacle of charger flexibility and power.   iD Simplicity With iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. EZ-Peak Dual identifies the type of battery and its capacity. EZ-Peak Dual also cuts down on wasted time by eliminating the hassle of programming and using complicated setups. Just plug an iD battery in and press Start. That’s it! Keeping with the simplicity and ease of use, the iD system eliminates fragile balance wires and clunky balance leads. The iD system streamlines the entire charging experience. QUICK FEATURES ON EZ-PEAK DUAL (#2972) CHARGER ­100-Watt output Recognizes Traxxas iD batteries to automatically program and optimize charger settings Charge a NiMH and LiPo at the same time Charge progress indicator Optimized for faster LiPo balance charging One button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Easy to use interface Audible alerts Built-in cooling fan Advanced Mode for full manual control of charger settings Legacy support for all Traxxas High-Current Connectors Built-in balance ports for conventional LiPo batteries Charges 5-8-cell NiMH batteries Charges 2S and 3S LiPo batteries EZ-PEAK DUAL (#2972G) SPECIFICATIONS AC Input: 100–240 Volts Charge Current Range: 1.0-4.0A (Dual Mode) or 5.0-8.0A (High Output Mode) (100W Max.) Discharge Current Range: 500 mAh Current Drain For Balance Ports: 500mAh NiMH Battery Cell Count: 5–8 Cells LiPo Cell Count: 2–3 Cells Net Weight: 575 g Dimensions: 176 x 138 x 57 mm  

På lager 8

Body clips, heavy duty (black) (12)

På lager 12

Speed Bit Master Set Hex Driver (7-pieces) Traxxas 7-Piece Metric Hex Bit Master Set 7-Piece Metric Hex Bit Master Set (#8711) Features: Precision-ground, hardened steel metric hex drivers Rubber overmolded handle for superior grip and comfort Precise fit magnetic insert holds the speed bit in the handle Standard 1/4 inch hex shank for use with power drill drivers Heavy-duty pouch holds tools securely Custom embroidered Traxxas logo Clearly marked with laser etched sizes Includes: Straight hex drivers: 1.5 mm, 2 mm, 2.5 mm, 3 mm Ball end drivers: 2 mm, 2.5 mm, 3 mm Maximum Durability 7-Piece Metric Hex Bit Master SetTraxxas premium tool kits are manufactured from exceptionally high quality materials to provide years of pro-level service. The thoughtfully engineered grip features an overmolded rubber design for more power and excellent comfort. The precision-ground, hardened-steel hex tips fit just right, to prevent wear, rounding, and screw damage. Designed specifically for Traxxas models, these speed bit sets come in a tough, compact pouch making them ideal to take along for service in the field. The included rubber overmolded handle holds the bits securely with a powerful magnet for fast bit changes. Headed to the track? Don’t worry, the included heavy-duty tool pouch keeps everything secure for traveling. Pick up any of the Premium Metric Speed Bit Sets and get wrenching with the only tools guaranteed to be Traxxas Tough™.  

På lager 2

This is the Traxxas 7-Cell 8.4V 3000mAh iD Power Cell NiMH Stick Battery Pack FEATURES New high current connector with gold-plated copper terminals  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings  MAXX cable high-efficiency 12 gauge silicone jacketed wire  Sub C size cells INCLUDES One 7-cell 8.4V 3000mAh iD Power Cell NiMH Stick Pack with High-  Current Connector REQUIREMENTS Peak-detection charger SPECIFICATIONS  Length: 155mm (6.10")  Width: 44mm (1.7")  Height: 23mm (0.91")  Weight: 380g (13.4oz)

På lager 1