Hopp til innhold
-7%

Tamiya 58752 Mercedes Benz 190E EVO II

Art.nr: 58752

2.595,-

2.795,-

- 7%
Tamiya

Tamiya

På lager: 2

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

1/10 R/C Mercedes-Benz 190 E 2.5-16 EVO II 1991 (TT-02 chassis) byggesett.

Denne bilen deltok i German Touring Car Championship (DTM) i 1991, og bidro til at Mercedes-Benz vant både konstruktør- og teammesterskapet det året. Dette byggesettet er en modell av bil nummer 8, med et karosseri i polykarbonat som gjenskaper den modifiserte 4-dørs sedan formen med frontleppespoiler og brede hjulbuer.

Separate forkrommede deler brukes til stjernen på panseret og til frontgrillen. Dekaler følger med for dekorering av karosseriet.

TT-02: Allsidig, balansert akseldrevet 4WD
Det akseldrevne firehjulstrekk TT-02 chassiet har en langsmontert layout, med batteriet på venstre side og motoren på høyre for å gi utmerket stabilitet. I tillegg har det identiske venstre og høyre bærearmer og uprights, noe som gjør monteringen enklere, samt girkasser som er enkle å vedlikeholde.

Chassiet er svært tilpasningsdyktig, med to mulige oppsett av akselavstand, to innstillinger for bakkeklaring og for to sporvidder, i tillegg til ti mulige girforhold.

Spesifikasjoner

Lengde / bredde / høyde: 445 × 184 × 137mm
Hjulbase: 257mm
Dekkbredde / diameter: 27 / 67mm (for- og bakhjul)
“Bathtub”-type chassis
Akseldrevet 4WD
For- og bakdifferensial med 4 bevel drev (koniske tannhjul)
3-delt styrestag
Firehjuls dobbel wishbone-oppheng
Friksjonsdempere foran og bak
Girforhold: 8.27:1 (9 ekstra forhold fra 11.38:1 til 7.28:1 mulig med separat solgte pinjonger)
Motor: type 540 inkludert
ESC inkludert

Må kompletteres med:

  • Radio og mottaker
  • Servo
  • NiMH eller LiPO batteri
  • Batterilader
  • PS lakk

Anbefales:

  • Kulelagre

Anbefalte farger:

PS-5 Black
PS-12 Silver
PS-31 Smoke
TS-14 Black
X-18 Semi-Gloss Black

Produsent

Mr. Yoshio Tamiya founded a saw mill/lumber factory in Shizuoka-City. Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World."


Now Tamiya is offering more than 3000 different products, both in the fields of precision static models and high performance radio control vehicles. These products are not only sold in Japan but also exported in vast quantities to the United States, Europe, South East Asia, and to many other parts of the world. The standard of excellence achieved by Tamiya is regarded as among the very finest in the world of model hobbies.

Reservedeler

Options Parts

Mailing til Body

Relaterte produkter

 

Art.nr: M-002
Copied
Genial til Tamiyabiler! Radio og mottaker. NiMh batteri og USB lader. Servo 6kg Dette settet fra MStyle inneholder radio og mottaker, 6kg analog servo og et 7.2V 2000mAh NiMh-batteri og kompatibel lader. Denne pakken vil være genial for den som har et kit eller eldre bil liggene som trenger utstyr.   R/C Set - Radioset with Servo, Battery and Charger   The new R/C set from MStyle is the ultimate package for anyone looking to build or upgrade their R/C car with high-quality electronics. This all-in-one kit provides nearly everything you need to get your vehicle up and running, whether you"re a hobbyist or a seasoned R/C enthusiast.   What’s included in the set: Radio T-401 2.4GHz: A reliable, easy-to-use transmitter offering precise control for your R/C car. Receiver R-401 4Ch 2.4GHz (Waterproof): A durable and waterproof receiver designed to ensure stable connectivity in various conditions. Servo S-602W 6KG: A powerful and responsive servo with a 6kg torque capacity, perfect for handling sharp turns and quick movements. USB NiMh Charger C-U02: A convenient USB charger for recharging your battery quickly and efficiently. 7.2V 2000mAh NiMh Stick Pack (with Tamiya Plug): A high-performance battery that provides the power you need for extended driving sessions.   Whether you’re assembling a new car or upgrading your current one, this set is designed to simplify the process and deliver a premium R/C experience. Get ready to take your R/C car to the next level with MStyle!     Transmitter T-401 The MStyle T-401 4-Channel radio system uses the latest digital 2.4GHz radio technology to give you trouble-free, total control of your RC car. This is a fully featured, lightweight, 4-channel radio with advanced ergonomic features and total adjustability. Thanks to its crystal-free 2.4GHz technology, you will be able to confidently drive with your friends without worrying about things like frequencies or radio conflicts, and the waterproof R-401 receiver allows you to take your RC vehicle anywhere you can dream! The advanced features of the MStyle T-401 let you set the radio up for your car with custom settings like servo reversing, center trim, dual rate and end point adjustments. Only 4 AA batteries are required to power the MStyle T-401, so it"s light in your hands, and the foam steering wheel makes it comfortable to hold. With the built-in failsafe feature, you will be protected just in case the radio transmitter loses its connection with the receiver. MStyle T-401 Radio Features Digital 2.4GHz FHSS technology 4 Channel Digital on and off switch Foam-covered wheel for extra comfort and grip Servo end point adjustments for steering and throttle Servo reversing Steering dual rate Centre trim (steering and throttle) Audible warnings if you leave the MStyle T-401 switched on as well as battery life! Lightweight (only 4 AA batteries required)     Receiver R-401 The R-401 is the latest receiver for the MStyle T-401 transmitter. Simply bind and drive and have fun with your friends thanks to crystal-free 2.4GHz technology Its tiny size is just 35x26mm and only 17mm high, and its extremely light weight of just 13 grams means it won"t affect the weight balance, no matter where it"s installed. The R-401’s PCB features its own silicone jacket within the Hardcase outer for waterproof protection for a true go-anywhere RC experience, allowing you to drive in mud, rain, and snow! And with failsafe protection, you have peace of mind no matter what RC vehicle you drive! MStyle R-401 Receiver Features: Waterproof R-401 receiver works with MStyle T-401 transmitters Digital Frequency-Hopping Spread Spectrum (FHSS) 2.4GHz technology Simple radio binding steps Adjustable built-in Signal loss failsafe Run your RC models kit with other drivers without worrying about frequencies! 4-Channel A built-in light controller on a separate channel will allow for the addition of headlights and taillights on suitable models with the Maverick LED Light Set (#150465) or HPI Warm White LED Kit (#160560) Ideal for electric RC vehicles with a 6V 35mA minimum BEC power input     C-U02 USB Charger This USB Delta-Peak Charger is a simple and easy to use charger for 2-8 Cell NiMH battery packs. A USB Adaptor with an output of at least 2A is recommended. Specifications: 2-8 Cell NiMH (600-2500mAh) Charging range USB input 5V 1A, (2A Recommended) Delta-Peak Charging Tamiya Battery connector     S-602W Servo This water-resistant servo is ideal for bashers and racers looking for a tough and durable servo that can be used in wet conditions (e.g. rain, snow, puddles). Features: Operating Voltage: 4.8-6V 4.8V: Speed: 0.18 sec/60 degrees, Torque: 6kg-cm 6V: Speed: 0.16 sec/60 degrees, Torque: 7kg-cm Servo Spline: 25T Dimensions: Main case: 40x37.5x20.0mm (excluding mounting tabs, servo spline, & cable outlet) Mounting tab hole centres: 49.5.0x10mm Weight: 46g (excluding servo horn)

795,-

895,-

På lager 6
KJØP
-11%
Art.nr: 45066
Copied
This is the Tamiya TBLE-03S Electronic Speed Control  for Sensor Equipped Brushless Motors. **Not suitable for use with rock crawling and twin motor powered models.**     FEATURES Designed for use with sensor equipped brushless motors such as the  Tamiya TBLM-01S and TBLM-02S, and brushed motors 23T and over  Compatible with NiCd, NiMH and Tamiya LiFe battery packs  Sensored brushless design detects motor rotor positions with  precision enabling more efficient power supply and smoother  motor response  Preinstalled cooling fan reduces overheating  Brake and neutral brake settings can be disabled independently   INCLUDES TBLE-03S ESC with Cooling Fan and Sensor Wire   SPECIFICATIONS  Dimensions: 1.2 x 1.46 x 1.04" (30.4 x 37.2 x 26.5mm)  Weight: 1.87oz (53.0g) including cable  Input Voltage: 6.6 -7.2V  Max Continuous Current: 120A  Receiver Output: 6V/1.5A  Protection Systems: Overheat, Overload, Low-Voltage

899,-

1.199,-

Kontakt oss for mer informasjon om dette produktet
Ikke på lager
-25%
Art.nr: YBS-0003
Copied
Steel Bearing Set (16pcs) For Tamiya TT-02 This is Yeah Racing RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings.   Features: For :Tamiya TT02    Material : Bearing Steel    Shielding: Metal   Specifications: YB6013M  5mm x 10mm x 4mm (8pcs) YB6014M  5mm x 11mm x 4mm (4pcs) YB6020M  8mm x 12mm x 3.5mm (4pcs)     Includes: Total Bearing (16 Pcs)

139,-

159,-

** Ikke på lager
KJØP
-13%
Art.nr: 54476
Copied
This ball bearing set is designed to be used for the TT-02 chassis platform. It replaces all plastic bushings with ball bearings resulting in a more efficient drive-train enabling faster speeds and higher durability. Can be used in conjunction with the new TT-02 chassis. 1050 Ball bearings x8 1150 Ball bearings x4 1280 Ball bearings x4  

289,-

299,-

** Ikke på lager
KJØP
-3%
Art.nr: YB0274BX
Copied
Yeah Racing RC PTFE Bearing Set with Bearing Oil For Tamiya TT02   Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision *Now comes with bearing oil for maintaining bearings in long run. (This new bearing set (with bearing oil) will replace the old item.)   Specification: Telfon Bearing For Tamiya TT02 Material: Telfon   Include: Bearing (16Pcs) Bearing Oil (15ml) #YA-0215

179,-

199,-

** Ikke på lager
KJØP
-10%
Art.nr: E-60WP
Copied
Mstyle E60WP Waterproof Brushed Electronic Speed Control (ESC) Item no. 542408 The E-60WP is a powerful and durable speed controller that is fantastic for RC vehicles of all type! Whether you've got a touring car, buggy or truck, this is the ideal unit to control the power for any vehicle equipped with a brushed motor of 12 turns or more. The E-60WP is also fully waterproof, making it the only choice for anyone who enjoys playing on the beach, in snow or even through mud! If you've got plenty of power to strap into your RC, you can count on the E-60WP to handle it: able to handle LiPo power of 2S and 3S or between 5 and 9 NiMH cells, this speedo can handle just about anything can you fit into the chassis! Of course, a safety cut-off is fitted to protect your LiPo batteries.   Fit the E-60WP in your RC vehicle so you can see for yourself what toughness, versatility and durability is all about! Features: 2S or 3S LiPo with voltage protection 5-9 cell NiMH or NiCd Suitable for all types of 1/10th scale vehicles Specification: Forward Continuous Current: 60A Forward Burst Current: 360A Reverse Continuous Current: 230A Reverse Burst Current: 180A Input: 2-3S LiPo, 5-9 cell NiMH/NiCd Applications: 1/10 on-road, off-road buggy, short course truck, truggy, crawler, tank, boat Motor Limit: 2S LiPo or 6 cell NiMH: 540 or 550-size motor great than or equal to 12 turn, RPM over 30,000 at 7.2v Motor Limit: 3S LiPo or 9 cell NiMH: 540 or 550-size motor great than or equal to 18 turn, RPM over 20,000 at 7.2v Resistance: FWD 0.001 Ohm, BWD 0.002 Ohm PWM Frequency: 1 KHz BEC: 6V/3A Dimensions: 36.5x32x18mm Weight: 39g

399,-

449,-

** Ikke på lager
KJØP
-11%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png