Hopp til innhold

Tamiya 56538 REIN. OUTPUT SHAFT SET

Art.nr: 56538

239,-

Tamiya

Tamiya

På lager: 2

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Denne er en forsterket versjon av giraksel B som blir brukt i 1/14 R/C Tamiya sine lastebil modeller. Det forsterkede materialet er mye mere motstandsdyktig mot slitasje, forbedrer kraftoverføring, samtidig som det reduserer motreaksjon og beskytter girene.

• Forsterket utgående aksel x1
• Små deler for festing er inkludert.

Produsent

Mr. Yoshio Tamiya founded a saw mill/lumber factory in Shizuoka-City. Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World."


Now Tamiya is offering more than 3000 different products, both in the fields of precision static models and high performance radio control vehicles. These products are not only sold in Japan but also exported in vast quantities to the United States, Europe, South East Asia, and to many other parts of the world. The standard of excellence achieved by Tamiya is regarded as among the very finest in the world of model hobbies.

Kunder kjøpte også

SAVÖX SG-0351-PLUS - Standard-Sized Servo The SG-0351 is a standard digital servo with dual bearing support for increased precision and durability. Features: Industrial plastic gears provide smooth and quiet operation Higher value standard servo with dual ball bearing support Specifications: Torque @4.8V: 3.2kg/cm Torque @6V: 4.1kg/cm Speed @4.8V: 0.22 sec/60 deg Speed @6V: 0.17 sec/60 deg Dimensions L x W x H: 40.7 x 20.0 x 37.0mm Weight: 41g Technical Details: Operating Temperature: -10° to 50°C Running Current (no load): 100mA @4.8V, 120mA @6.0V Stall Current (at locked): 800mA @4.8V, 1000mA @6.0V Idle Current: 5mA @4.8V, 5mA @6.0V Wire Length: 300 ± 5mm Output Gear Spline: 25 Tooth Bearings: 2BB Operating Travel: 120° (1000 → 2000 µ second) Neutral Position: 1500 µ second Pulse Width Range: 800 → 2200 µ second Maximum Travel: Appx 164° (800 → 2200 µ second) Refresh Rate: 240 Hz Motor Type: Brushed

239,-

259,-

På lager 6
KJØP
-8%
Dette er en en frest plate for enkelt å kunne gear’e og kjøre en lastebil med Carson Reflex 14 radio. Ett must om man bruker denne radioen.

89,-

På lager 1
KJØP
Aluminum Animal Guard for Tamiya King Hauler and Globe Liner Animal Guard for Tamiya King Hauler or Globe Liner, made from Aluminum. Includes spaces and screws. Weight: 155gr.

1.095,-

1.495,-

På lager 1
KJØP
-27%
  These are the Tamiya Metal-Plated Front Wheels                For 1/14 R/C Tractor Trucks with 22mm wide tires FEATURES: Plastic construction, silver colored, matte finish INCLUDES: Two wheels SPECS:    Diameter: 1-7/8" (48mm)           Width: 1" (25mm)

79,-

På lager 4
KJØP
Tractor trucks rolling along highways worldwide are often seen with tough, protective equipment (known as "animal guards") on their front grilles.  This is a scale reproduction of these guards designed for the Tamiya 1/14 scale R/C tractor trucks (the King Hauler, and the Globe Liner). FEATURES:    Hard anodized aluminum bars              Metal plated ABS supports INCLUDES:    Three "A" shafts (5mm x 162mm)           Sixteen 2x5mm screws    One   "B" shaft   (5mm x 62mm)           One guard bracket    Two   "C" shafts  (5mm x 48mm)           Illustrated instructions    Four support brackets SPECS:    Width:  170mm (6.7")    Height:  120mm (4.7")     Depth:  23mm (.9")       (D2)

349,-

På lager 8
KJØP
This roof spoiler is a great little unit used to hop-up the Tamiya King Hauler. INCLUDES:    (12) 2x6mm screws    (2) link pins    (2) 2mm nuts    (2) 2mm e-clips    (2) spoiler stays    (2) spoiler rails    (2) spoiler brackets (parts A2 and A4)    (2) rod holders    (1) spoiler rod    (1) black nylon spolier REQUIRES:    A Tamiya King Hauler                         ****** (Refer to next page)      MDJ 41/95 ¦-) The roof spoiler may also be used with Tamiya's Globe Line Cab over truck. The spoiler is designed to be used with Tamiya's 1/14 scale tractor trailer trucks. FEATURES:   Adjustable wind-deflector type roof spoiler   Realistic roof spoiler (enhances truck appearance and also functional)   Black plastic styrene parts SPECS: Spoiler angle can easily be adjusted between 30-90° thus allowing    you to choose desired angle

279,-

På lager 4
KJØP
This is a Hop-Up Light Kit for the Tamiya Semi-Trailer (56302) that is               used with the Tamiya King Hauler (56301). FEATURES: These lights are for brake lights (one left and one right) and             turn signal (or "blinker") lights (one left and one right). The             bulbs are clear and installed behind the brake and turn signal             lenses (just like a real car/truck). INCLUDES: One Light Set: Brake and blinker lights, light cable (that runs the             length of the trailer) and plug (to plug into connector cable).           One Connector Cable: Connects the light set to the circuitry board on             the tractor (the circuitry board is included in the tractor             light set).           One Rubber Bushing: To protect the light cable where it passes             throught the front of the trailer.           One Plastic Bushing: To protect the light wires where they pass             through the floor of the trailer to the rear bumper.           Two Nuts(2mm), two Bolts(2x15mm) and Two Washers(2mm): For mounting             the plug receptacle in the tractor body.           One Double-Sided Tape           One Illustrated instructions REQUIRES: This light set is powered by the 6-cell motor battery in the tractor.           Must use the Tractor Lights 56501 also to make functional.

529,-

569,-

På lager 3
KJØP
-7%
★These ball bearings can be used in place of standard metal bearing counterparts, giving your R/C 8×4 truck’s performance, runtime and durability a boost thanks to a more efficient drivetrain. ★Contains 2x 1260 ball bearings, 32x 1150 ball bearings, 2x 850 ball bearings. *Please note that some models may not require all of the ball bearings in this set.

479,-

499,-

På lager 1
KJØP
-4%
Savöx Digital Servo SC-0252MG   4.8V Speed: 0.23 6.0V Speed: 0.19 4.8V Torque: 7.2 kg-cm 6.0V Torque: 10.5 kg-cm Dimensions: 40.7 x 19.6 x 39.4mm Weight: 49 gram Gear: Metal Ballbearing: 2

399,-

439,-

På lager 3
KJØP
-9%
Savöx SC0251MGPLUS - Larger Standard Digital Servo - 0.18s/60° 16kg/cm @ 6V The Savox SC-0251MGP is a high torque, metal-geared, digital servo which is suitable for many applications. Features: Soft Start Sanwa SSR compatible Metal gear train ensures durability under harsh situations Slightly taller case design Ideal for aircraft and some car applications Specifications: Torque @ 4.8v: 13kg/cm Torque @ 6v: 16kg/cm Speed @ 4.8v: 0.20s/60° Speed @ 6v: 0.18s/60° Dimensions L x W x H: 40.7 x 20 x 42.4mm Weight: 61g Operating Temperature: 14° - 122°F (-10° - 50°C) Running Current (no load): 300mA @4.8V, 350mA @6.0V Stall Current (at locked): 2600mA @4.8V, 3200mA @6.0V Idle Current: 5mA @4.8V, 6mA @6.0V Wire Length: 300 +/- 5mm Output Gear Spline: 25 Tooth Bearings: 2BB Operating Travel: 120° (1000 → 2000 µ second) Neutral Position: 1500 µ second Pulse Width Range: 800 → 2200 µ second Maximum Travel: Appx 164° (800 → 2200 µ second) Refresh Rate: 240 Hz Motor Type: Brushed

459,-

499,-

På lager 1
KJØP
-8%
This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           INCLUDES: One 100ml Spray Can of Synthetic Lacquer Chrome Yellow Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.           Keep out of the reach of children.                                                    

109,-

På lager 4
KJØP
14 kanals mottaker til Carson Reflex 14 CH LCD

849,-

899,-

** Ikke på lager
KJØP
-6%
Traxxas curved tip heavy-duty polycarbonate scissors are perfect for cutting around wheel wells and other curved lines in polycarbonate bodies and other simmilar materials.

119,-

129,-

På lager 3
KJØP
-8%
The popular Multi-Function Control (MFC) unit for R/C tractor trucks, which adds a whole extra layer of realism to driving, receives an update. This unit allows transmitter trim levers to be combined with stick control use, meaning you can enjoy lights, sounds and vibrations coordinated with actions while driving your R/C tractor truck model. This version of the MFC features engine sounds which were recorded from a real European truck's L6 diesel engine for amazing realism.   •Features 33 different types of sound, including engine ignition and shutdown, horn, gear changes, brakes, air sound effects and so on. A 60mm-diameter full-range speaker in a resin case provides excellent quality. •Up to 21 actions can be controlled using a 4-channel transmitter. Tamiya Attack 2.4 GHZ Radio System 4-channel recommended for best compatibility. •Light operation and volume adjustment are also possible using the transmitter. •Includes white, red and yellow high brightness LEDs to duplicate truck HID lights with precision. •An ESC has been built in to the unit, enabling realistic running at very low speeds. •The MFC unit can be run in three modes: R/C mode with Multi-Function (lights and sounds) off; Multi mode, with R/C and multi-function on; Demo mode, which allows display of lights and sounds only. •Can be used for support leg operation when employing Item 56505 Motorized Support Legs. •Cannot be used together with Item 53909 TLU-01 or Item 53937 TLU-02 LED light units. •Requires separately sold 4ch transmitter with slide trims, 4ch receiver and 2 servos (3 if using Item 56505). Tamiya Attack 2.4 GHZ Radio System 4-channel recommended for best compatibility.

3.595,-

4.395,-

På lager 1
KJØP
-18%
7.2V 3000mAh - Bronto SP - Ni-Mh - Tamiya plugg   Lengde - 135mm Bredde - 47mm Høyde - 24mm

295,-

På lager 1
KJØP
SERVO HD9001MG (9.8KG/0.14SEC)

249,-

269,-

På lager 4
KJØP
-7%
Smooth, concise shift changes for your 1/14 scale R/C truck await with this precision aluminum servo horn, which in turn helps lessen wear and tear on gear and clutch components. Item Contents/Information • Aluminum Shift Servo Horn x1 • Hi-Torque Servo Saver Spring (Small) x1 • Hi-Torque Servo Saver Spring (Large) x1 • Small parts for attachment are also included. • Compatible with 1/14 scale R/C truck models.

239,-

På lager 1
KJØP
Electric Actuator Set for 1/14 Scale R/C Tow Truck Dette settet er nødvendig for å fullt ut operere bergings bilen fra Tamiya. Dette gjør at “brillen” kan opereres fullt ut. This set allows control of the winch boom/underlift on our brand new Volvo Globetrotter 750 8×4 Tow Truck model (Item 56362). Fit it, and use your transmitter to raise and lower the boom smoothly and steadily. 1/14 RC This is an assembly type parts set for raising and lowering the winch boom / underlift of the RC tow truck by RC operation. It consists of a spindle cylinder that expands and contracts with a high-precision geared motor, and an ACU-02 unit that controls the motor. If you put the front wheel of the 1/14 RC trailer head on the tire fork of the underlift and raise the winch boom, you can run in the towed state as it is. It is also equipped with a limit switch that detects the angle of the winch boom and automatically stops, and a clutch mechanism that protects the mechanism from overload. With a manual switch. Consists of a geared motor, spindle cylinder, ACU-02 unit that controls the motor, limit switch, power supply branch cord, manual toggle switch, etc. Set Contents/Information • ACU-01 Actuator Control Unit x1 • 7.2V Geared Motor (ratio: 64:1) • The geared motor moves the spindle shaft and links, which raises the boom at a slow and steady speed. The attached underlift moves in conjunction, too! • A toggle switch also allows manual operation. • When fitted, this system allows your truck to tow loads such as other tractor truck heads (without trailer). • Clutch system is installed to mitigate potential damage from overloads.

3.295,-

3.495,-

På lager 1
KJØP
-6%
Tamiya 56362 - Volvo FH16 Globetrotter 750 8×4 TungBerger RC VOLVO FH16 GLOBETROTTER Byggesett fra Tamiya Description: Tamiya’s series of ultra-realistic 1/14 scale R/C trucks has offered fun and realistic driving for the past several decades! This new kit takes that driving fun to the next level with this tow truck, which makes its living towing heavy duty vehicles such as semi-tractor trucks. It promises a completely different element of enjoyment to predecessors in the series. The kit seen here recreates the FH16 that is marketed by Volvo, a renowned manufacture in the global commercial vehicle market. The FH Series includes a 750hp 16.1-liter turbocharged inline-6 engine FH16 Globetrotter 750 8x4 tow truck. • 1/14 scale R/C model assembly kit. Length: 750mm, width: 195mm, height: 300mm. • Features a detailed molded plastic depiction of the cab, with photo-etched front grille and interior detail features. • This model’s front axles feature the first twin steering system seen in the Tamiya 1/14 Truck series. • Includes metal components for excellent durability. • Install the new separately available Actuator Set (Item 56553) to control its actions via your R/C transmitter. • Ladder frame has aluminum side channels and resin cross members. Power from the front motor is delivered to the two rear axles via a propeller shaft. • A built-in differential gear on each axle enables smooth cornering. • Highly realistic suspension utilizes metal leaf springs and friction dampers. • The model enjoys easy driving thanks to the float-mounted die-cast front and reinforced resin rear axles. • Three-speed transmission allows shifting via the R/C transmitter (Note: only one gear is usable when towing). • Headlights and taillights can be lit up with separately sold LEDs, and the model is compatible with Item 56523 Tractor Truck Multi-Function Control Unit "Euro-Style" (MFC-03). • Compatible TROP truck option parts: 56523, 56531, 56538, 56548, 56549, 56550, 56551, 56553. • Requires: Tamiya 4-Channel R/C system, ESC, 7.2volt battery and compatible charger, and Tamiya TS and acrylic paints Specifications: Adjustable Gear Ratio Yes Bearings Metal bearings and bronze bushings Body Material ABS Plastic Body Stickers Included Chassis Material Aluminum and ABS plastic Chassis Type Semi-Truck Construction Type Assembly Kit Differential Type Gear Drive Type 2WD Electronic Speed Control (esc) Not Included (sold separately) Motor Brushed 540 Type Requires A 4-Channel radio, 2 servos, ESC, 7.2volt battery with compatible charger, and Tamiya TS spray and Acrylic bottle paints Scale 1/14 Shock Damper Oil-filled damper Terrain Use On-Road

11.995,-

13.295,-

** Ikke på lager
KJØP
-10%
Tamiya 56551 MFC LED (3mm Yellow x2 1,100) Tamiya is delighted to announce the release of these LED products, which will allow you to light up longer truck models. They are of course compatible with Tamiya’s famous and super-realistic Multi-Function Control units MFC-01 and MFC-03. LEDs come ready to use, with easy-use connectors and tag stickers included. Contents/Information • 1,100mm Yellow LED Cables x2 • Each cable features a 3mm diameter yellow LED for use as a turn signal.

139,-

På lager 1
KJØP
Tamiya MFC LED (3mm Red 1,100) Tamiya is delighted to announce the release of these LED products, which will allow you to light up longer truck models. They are of course compatible with Tamiya’s famous and super-realistic Multi-Function Control units MFC-01 and MFC-03. LEDs come ready to use, with easy-use connectors and tag stickers included. Contents/Information • 1,100mm 3mm Red LED Cable x1 • Features two 3mm diameter red LEDs for use as brake lamps.

139,-

149,-

På lager 3
KJØP
-7%
This TAMIYA LED product allows you to light up longer R/C truck models. They are compatible with Tamiya’s famous and super-realistic Multi-Function Control units MFC-01 and MFC-03. LEDs come ready to use, with easy-use connectors and tag stickers included. • 1,100mm 3mm White LED Cable x1 • Features two 3mm diameter white LEDs for use as reverse lights.

139,-

På lager 2
KJØP
Professional, modern and technially high-quality, 14-channel remote control system for universal use in many RC vehicles and vessels. 14 channels can be controlled independently by means of 2 control sticks and 10 switches(5x pushbutton/5 step swith), for example light/sound, horn, winch, support legs, water pump and water monitor. The Reflex Stick Multi Pro 14 channel system is fully compatible with the MFC 01/03 and DMD units from Tamiya.   Whats in the package: 1x 14 Channels Radio. 1x 14 Channels receiver 1x manual   Required for item: 4x AA batteries.

2.195,-

2.395,-

** Ikke på lager
KJØP
-8%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png