Hopp til innhold

Tamiya 47369 MAZDA 2 LW BODY

Art.nr: 47369

459,-

Tamiya

Tamiya

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is a lightweight version of the LONG wheelbase-use body of the Mazda 2. It is made from 0.8mm polycarbonate as opposed to the standard 1.0mm. Using this body will give your M-05 and M-07 RC model car a lower center of gravity, improving its performance.

Set Contents

  • Mazda2 is recreated in 0.8mm thickness polycarbonate.
  • Separately molded parts recreate side mirrors.
  • Marking stickers, plus masking stickers for use when painting are included.
  • Compatible with LONG wheelbase (239mm) M-05, M-05 PRO, M-05 Ver.II PRO and M-07 Concept chassis cars.
  • Requires PS paint to finish.

Produsent

Mr. Yoshio Tamiya founded a saw mill/lumber factory in Shizuoka-City. Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World."


Now Tamiya is offering more than 3000 different products, both in the fields of precision static models and high performance radio control vehicles. These products are not only sold in Japan but also exported in vast quantities to the United States, Europe, South East Asia, and to many other parts of the world. The standard of excellence achieved by Tamiya is regarded as among the very finest in the world of model hobbies.

Kunder kjøpte også

Skidplate, front (1), rear (1)

99,-

KJØP
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-28 Fluorescent Green).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-41 Bright Silver).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
This is the PS-57 Pearl White Spray from Tamiya. FEATURES: Extremely useful for painting large surfaces           The color of the lid represents the color of paint           For use on polycarbonate surfaces INCLUDES: One 3.4oz (100ml) Spray Can of Pearl White Tamiya Color REQUIRES: Removing protective film from body before spraying COMMENTS: Highly Flammable

129,-

KJØP
  This aluminum counter shaft replaces the stock steel shaft found in the M-07 Concept’s gearbox. At 2.8 grams, this aluminum shaft weighs 1.5g less than the kit standard steel part (MA18), which weighs 4.3 grams. Aluminum Counter Shaft x1 Compatible with the M-07 Concept chassis.

75,-

KJØP
Nuts, 5mm flanged nylon locking (steel, black serrated) (8)

49,-

KJØP
Adapter, standard servo (adapts standard servo to fit in X-Maxx)

79,-

KJØP
D-MAX Wire Set Red & Black - 14AWG 1+1m This is a high quality wire with a high amount of copper strands making it very suitable for RC models and other hobby projects. The wire is covered with a silicone based insulation material and together with the high strand count it’s also very flexible.   Short and Thick is Good In electric high powered models we are recommending you to use short and as thick wires as possible (within reason) together with a matching diameter/area connector system for optimum performance. Specifications: Length: 1+1m AWG Wire: 14 Area Wire: 2.5mm2 Diameter Wire: 2mm Diameter Insulation: 3.6mm Wire: 400 Strands of Copper @ 0.08 mm Insulation: Silicone Based

69,-

KJØP
Skid plate, roof (body) (orange)/ 3x12mm CS (4)

69,-

KJØP
Body reinforcement set, Maxx® (fits #8911 body)

69,-

KJØP
Wheel hubs, hex (2)/ 2.5x14 pins (2)

45,-

KJØP
This is a pair of pre-mounted Badlands MX38 HP 3.8" Belted Monster Truck Tires. Pro-Line is taking the 3.8" tire game to the next level with the Baddest tire ever conceived: the Badlands MX38 HP BELTED tires! Pro-Line Badlands tires are known for having a sweet Motocross inspired tread and the all-new Badlands MX38 HP tires kick that up a notch with Bigger and Bolder knobby tread. The Badlands MX38 is a true All-Terrain tire that will find traction on any surface but is best suited for loose & loamy dirt, mud or grass. Just imagine your truck throwing up huge rooster tails with these awesome looking tires! Pro-Line has developed the technology to mold a High-Performance herringbone weave pattern Belt inside of the Badlands MX38 HP tires that will prevent the tire from ballooning or expanding during use. This will give you maximum control to put the power down even at high speeds! The Badlands MX38 HP 3.8" tires provide the incredible grip that you expect from Pro-Line due to the soft M2 compound and the aggressive Motocross inspired tread. Pro-Line also heard the calls for a new tire size to fit the current generation of Monster Trucks and the all new MX38 HP delivers at 3.48" wide and 6.8" tall. Just like all of Pro-Line's tires, they are proudly Made in the USA! Please note that the Badlands MX38 HP tires have a maximum speed rating that, if exceeded, could result in permanently damaging the internal belt. Over revving your Badlands MX38 HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free spinning tire or tires. The new Belted Badlands MX38 HP 3.8" tires come Pre-Mounted on the next generation 3.8" wheel design from Pro-Line, the Raid 3.8" Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires! These new Raid 3.8" wheels make this possible by using a unique 8x32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The hexes are included and are also available separately (6345-00). The built-in adjustability and ease of use make this a new must-have wheel for backyard bashers everywhere! Be the first to own the latest and greatest technology from Pro-Line, get the new Badlands MX38 HP 3.8" Belted tires now!

1.049,-

1.099,-

KJØP
-5%
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-19 Camel Yellow).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
XT60 PAIRS WITH CAP END (5PCS)

169,-

KJØP
Bumper Front Maxx

69,-

KJØP
Steering bellcranks/ bellcrank support/ servo saver/ servo saver spring/ draglink/ 3x20mm shoulder screws (2)

85,-

KJØP
Servo horn, steering/ linkage, steering (46mm, assembled with pivot balls)

59,-

KJØP
Bumper Rear Maxx

69,-

KJØP
Suspension pin set, front (left or right) (hardened steel), 4x64mm (1), 4x22mm (2), 4x38mm (1), 4x33mm (1), 4x47mm (1)

89,-

KJØP
Suspension pin set, rear (left or right) (hardened steel), 4x64mm (1), 4x38mm (1), 4x33mm (1), 4x47mm (1)

69,-

KJØP
Traxxas 60WT/700cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 60WT (700cSt) Bottle size: 60ml

99,-

109,-

KJØP
-9%
Traxxas 8913R Body Reinforcement Roof Maxx (Long Wheelbase) (Body #8918)  

89,-

KJØP
Traxxas 8955R Driveshaft Center Alu Maxx (Long Wheelbase)

129,-

KJØP
Body Maxx (Long Wheelbase) Clear Body, Maxx® (clear, requires painting)/ window masks/ decal sheet (fits Maxx® with extended chassis (352mm wheelbase)) From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and Traxxas ProGraphix® paint makes it easy to get professional quality results. Traxxas clear bodies come fully-trimmed with pre-drilled body holes for easy mounting. There's also a protective overspray film applied to the body. Window masking and decals also come in the kit.

449,-

KJØP
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-8 Light Green).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.                    Highly flammable.

109,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png