Hopp til innhold
Hjem / Masse Diverse / RC4WD-produkter / RC4WD E0079 FF-030 Micro Electric Motor

RC4WD E0079 FF-030 Micro Electric Motor

Art.nr: E0079

79,-

RC4WD

RC4WD
På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the RC4WD FF-30 Micro Electric Motor.

FEATURES

For the 1/18 scale RTR Gelande II Truck

High torque magnet and rotor, tuned for rock climbing and scale driving

Hardened steel 80P 10 tooth pinion gear

INCLUDES

FF-030 Micro Electric Motor

M2 x 10mm Socket Head Screw

M2 x 4mm Socket Head Screw

SPECIFICATIONS

Rated Voltage: 7.4V

Total Length: 1.12" (28.5mm)

Output Shaft Length: 0.20" (5.1mm)

Output Shaft OD: 0.06" (1.5mm)

Weight: 0.38oz (11g)

RPM: 7,032 at no load

Current: 37 mA

Produsent

RC4WD

RC4WD

Kunder kjøpte også

Hovedbilde RC4WD B0113 - D90 Body Set for 1/18 Gelande II Hovedbilde RC4WD B0113 - D90 Body Set for 1/18 Gelande II
RC4WD B0113 - D90 Body Set for 1/18 Gelande II
RC4WD D90 Body Set for 1/18 Gelande II     Specifications: ABS Plastic Amazing Detail Paintable WheelBase: 5.15in / 130.75mm Width: 4.3in / 108.08mm Height: 3.02in / 76.8mm Weight: 3oz / 85g         Shown installed with 1/18 Gelande II D90 Truck (Discontinued) for example (Not Included)       Photos provided by customer     What's Included: 1x RC4WD D90 Body Set for 1/18 Gelande II 1x Front Bumper 1x Rear Bumper Step 1x Drop Hitch 1x License Plate Optional Parts: Interior for 1/18 Mini D90 (Z-B0166) Notes: Fits 1/18 Gelande II D90 Truck Fits RC4WD 1/18 Gelande II RTR w/D90 Body Set (Blue) (Z-RTR0039) The RC4WD 1/18 D90 Body Set is fully assembled.

339,-

369,-

KJØP
-8%
Hovedbilde RC4WD B0125 Black Rock Body Set For 1/18 Gelande II Hovedbilde RC4WD B0125 Black Rock Body Set For 1/18 Gelande II
RC4WD B0125 Black Rock Body Set For 1/18 Gelande II
RC4WD Black Rock Body Set for 1/18 Gelande II     Specifications: ABS Plastic Injection Molding Wheelbase: 5.15in / 130.75mm Length: 9.00in / 228.50mm Width: 4.26in / 108.19mm Height: 4.35in / 110.57mm Weight: 5.60oz / 159.1g             Shown installed on RC4WD 1/18 Gelande II RTR w/Black Rock Body Set (Z-RTR0037) for example (Not Included)         What's Included: 1x Black Rock Body Set for 1/18 Gelande II 1x Manual 1x Decal Sheet   Optional Parts: RC4WD D90 Body Set for 1/18 Gelande II (Z-B0175)   Required to Complete: Modeling / Craft Knife Body Reamer Side Cutters Instant glue / Plastic Cement  (prefer non whitening) Hex Drivers (1.5mm, 2mm) Cross Phillips Screwdrivers (small)   Replacement Hardware: Steel Button Head Cap Screws M2.5 x 4mm (Z-S1787) Steel Button Head Cap Screws M2 x 4mm (Z-S1096) Steel Socket Head Cap Screw M2 X 4mm (Z-S0922) Button Head Self Tapping Screws M2.5 X 8mm (Z-S1572) Steel Socket Head Cap Screws M2 x 8mm (Z-S0750) Socket Head Self Tapping Screws M2 X 6mm (Z-S1584) Steel Button Head Cap Screws M2.5 x 10mm (Z-S0916)   Instruction Manual: Click here to download.   Notes: Fits RC4WD 1/18 Gelande II RTR w/D90 Body Set (Blue) (Z-RTR0039)  Fits RC4WD 1/18 Gelande II RTR w/Black Rock Body Set (Z-RTR0037) Requires Assembly

399,-

KJØP
Hovedbilde Traxxas 7043 Steering arm (upper & lower)/ steering ... Hovedbilde Traxxas 7043 Steering arm (upper & lower)/ steering ...
Traxxas 7043 Steering arm (upper & lower)/ steering ...
This is the Steering Arm for use on the                   Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Upper and Lower Steering Arm           Steering Link           Servo Horn           Servo Saver           Servo Saver Spring           Servo Horn Mount           Two Ball Studs           Front and Rear Shock Mounts           Four 2.5x18mm Cap Head Screws REQUIRES: Installation on the vehicle

149,-

Ikke på lager
Hovedbilde Traxxas 1834A Body Clips Standard Black (12)
Traxxas 1834A Body Clips Standard Black (12)
Body Clips Standard Black (12)

29,-

39,-

KJØP
-26%
Hovedbilde RC4WD U0036 R5 1/18 MINI TRANSMISSION V2 Hovedbilde RC4WD U0036 R5 1/18 MINI TRANSMISSION V2
RC4WD U0036 R5 1/18 MINI TRANSMISSION V2
  R5 1/18 Mini Transmission V2   Specifications: Plastic Injection Molding Case  FF-030 Micro Electric Motor Gear Ratios Pinion / Spur 10/55= 5.5:1 Delrin Spur Gear Slipper Clutch Design Output Shaft OD: 0.12 / 3mm Height: 1.07in / 27.3mm Length: 1.38in / 35.01mm Width: 1.32in / 33.64mm Weight: 0.88oz / 25g Manufactured by RC4WD   Shown installed on RC4WD 1/18 Gelande II RTR with D90 Body Set (Discontinued) for example (Not included)   What’s Included: 1x R5 1/18 Mini Transmission V2   Replacement Hardware: Steel Head Socket Cap Screws M1.6 x 3mm (10) (Z-S1710) Steel Socket Head Cap Screws M1.6 x 4mm (Z-S1232) Steel Flat Head Cap Screw M2 X 4mm (Z-S1516) Replacement Part: FF-030 Micro Electric Motor (Z-E0079)   Notes: Motor plugs directly into the ESC on the Mini Gelande Trucks

549,-

579,-

KJØP
-5%
Hovedbilde Traxxas 3063X Wire Harness Series Battery Connection
Traxxas 3063X Wire Harness Series Battery Connection
This is the Series Battery Connection Wire Harness for use               on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Traxxas IDConnectors           Combines voltage of connected batteries for increased speed INCLUDES: One Wire Harness with instruction sheet REQUIRES: Installation between batteries and ESC

109,-

KJØP
Hovedbilde RPM 80604 Rear Upper/Lower A-Arms Green Traxxas Mini ... Hovedbilde RPM 80604 Rear Upper/Lower A-Arms Green Traxxas Mini ...
RPM 80604 Rear Upper/Lower A-Arms Green Traxxas Mini ...
RPM Rear A-arms for 1/16 E-Revo - Green Replaces stock Traxxas #7132 Quick Notes: Replaces stock Traxxas #7132 Matching Front A-arms available Matching Axle Carriers available Similar to RPM front A-arms, our rear arms eliminate nearly all of the A-arm slop typically found in stock Mini E-Revo rear A-arms, allowing camber and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent suspension system with a significantly reduced tendency for the truck to randomly wander while driving. RPM rear suspension arms match the same design elements as our fronts using angled leading and trailing edges. By incorporating a 30-degree bevel in these areas, we reduce the chance of breaking suspension parts since the A-arms will naturally try to transition over objects instead of bluntly plowing into them. RPM Mini E-Revo rear A-arms are sold in sets of four – both upper and both lower A-arms. These miniature E-Revo A-arms, like all RPM molded products.

165,-

KJØP
Hovedbilde RPM 80694 Suspension Arms Front Green (2+2) 1/16 ... Hovedbilde RPM 80694 Suspension Arms Front Green (2+2) 1/16 ...
RPM 80694 Suspension Arms Front Green (2+2) 1/16 ...
Suspension Arms Front Green (2+2) 1/16 E-Revo replaces TRX 7131 Quick Notes: – replaces stock Traxxas #7131 – matching Rear A-arms available – matching Axle Carriers available Upon the release of the Traxxas 1/16th Scale Mini E-Revo, we immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With our guaranteed unbreakable material and a proven A-arm design based off of our larger, 1/10th scale Revo A-arms, durability for these little monsters has arrived! A siginificant problem we have been able to eliminate was slop in the suspension system. In some cases, we found as much as 1/32” of slop in the stock A-arms! That has been remedied with these new RPM versions. Our A-arms eliminate nearly all of the A-arm slop, which allows camber, caster and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent steering and suspension system with a significantly reduced tendency for the truck to randomly wander while driving. Unique to RPM suspension arms is our angled leading and trailing edges. We incorporate a 30-degree bevel in these areas, which reduces the chance of breaking suspension parts since the A-arm will naturally try to transition over objects instead of bluntly plowing into them. RPM front A-arms for the Traxxas Mini E-Revo are sold in sets of four – both upper and both lower a-arms.

199,-

KJØP
Hovedbilde Traxxas 7015 Front & Rear Body Mounts & Posts 1/16 VXL
Traxxas 7015 Front & Rear Body Mounts & Posts 1/16 VXL
These are the Front and Rear Body Mounts and Posts for use on the                     Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Front Body Mount           One Rear Body Mount           Two Front Body Posts           Two Rear Body Posts REQUIRES: Installation on the vehicle

79,-

KJØP
Hovedbilde Traxxas 7030X Bulkhead Front Left & Right 3x10mm BCS ...
Traxxas 7030X Bulkhead Front Left & Right 3x10mm BCS ...
This is the Front Bulkhead for use on the                  Traxxas 1/16 scale E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Two front bulkhead halves           Four 3x10mm Button Head Screws           One 2.5x23mm Cap Screw REQUIRES: Installation over front diff assembly  

79,-

KJØP
Hovedbilde Yeah Racing YE-0019 Li-Po Monitor With LCD Version ...
Yeah Racing YE-0019 Li-Po Monitor With LCD Version ...
Yeah Racing Li-Po Monitor With LCD Version 2S-8S Lipo alarm. Description: This Li-Po detector is designed to measure 1-8 cells Li-Po batteries with a dual buzzer When the voltage is below the set value, it will buzzer with a red LED light Feature: Voltage detection precision: Approx. 0.01V Unit voltage display range: 0.5-4.5v Total voltage display range: 0.5-36V 1S Test model voltage range: 3.7-30V Low voltage alarm model for 2-8S Alarm set value range: OFF-2.7-3.8V Include: Li-Po Monitor with LCD version (1pc)

89,-

KJØP
Hovedbilde Yeah Racing YT-0178BK Aluminum Body Mounting Hole ... Hovedbilde Yeah Racing YT-0178BK Aluminum Body Mounting Hole ...
Yeah Racing YT-0178BK Aluminum Body Mounting Hole ...
Yeah Racing Aluminum Body Mounting Hole Reamer 0-14mm Black Description: Open body mount holes with ease with this steel tip body reamer with an aluminum handle whilst giving you a good grip and keeping the weight down whilst carrying it around. Open holes up to 14mm big with this reamer!   Features: For: Body Mounting Material: Aluminum Color: Black   Includes: Aluminum Body Mounting Hole Reamer (1 pc)

209,-

229,-

KJØP
-9%
Hovedbilde Yeah Racing YT-0004 CURVED LEXAN SCISSORS
Yeah Racing YT-0004 CURVED LEXAN SCISSORS
Material: Aluminium Length: 140mm Colour: Black Qty: 1Pc

59,-

KJØP
Hovedbilde Excel 16001 Blades K1 Aluminum Knife with safety cap
Excel 16001 Blades K1 Aluminum Knife with safety cap
  K1 Knife comes replaceable super sharp #11 blades and a snug fitting safety cap Precision knife with special screw for extra blade security and stabilization Used on: paper, cardstock, stencils, film, photographs, tape, plastic, wood, cloth, leather, cardboard, cricut, cork, vinyl, foam boards and most other light-weight crafting Used for: cutting art, model making, crafting, car wrapping, vinyl work, carving pumpkins, quilling Used by : graphic designers, hobbyists, scrapbookers, quillers, and crafters and general purpose Includes (1) K1 Aluminum Knife with (1) #11 Blade, .31 x 4.75 in - .8 x 12 cm K1 Aluminum Knife fits with Excel Blades # 5 / 6 / 10 / 11 / 12 / 13 / 16 / 17 / 17A / 21  

59,-

KJØP
Hovedbilde Traxxas 5150 E-clips, 1.5mm (24)
Traxxas 5150 E-clips, 1.5mm (24)
E-clips, 1.5mm (24)

19,-

KJØP
Hovedbilde Savox SH-0255MG Digital Metal Gear Micro Servo
Savox SH-0255MG Digital Metal Gear Micro Servo
This is the Savox SH-0255MG Digital Metal Gear Micro Servo.  Features:  Over-spec refined design out performs ordinary micro size servo The Aluminum Case design looks good and allows for lower operating temperatures Precision metal gears forms a strong and solid framework Strict production and quality control of plastic components Totally Green – from materials to production, these servos are environmentally friendly Ideal for CCPM and Rudder on 450 class heli's and Park Flier Airplane's *NOTE: Certain combinations of receiver and ESC have been found to cause "Brown Out" issues when combined with Savox servos. An external BEC, or BEC stabilizing receiver capacitor may be needed for efficient, glitch free operation in low voltage electric applications.   Specifications:   Speed @ 6.0V: 0.13 sec/60° Torque @ 6.0V: 54 oz-in / 3.9 kg-cm Weight: 15.8g Bearing: Single Type: Micro Plus     Gear: Metal Case: Aluminum Output Shaft: 21T Spline  Case Size (LxWxH): 22.8x12x29.4mm

259,-

KJØP
Hovedbilde Tamiya 54599 LED Light 3 Halogen White
Tamiya 54599 LED Light 3 Halogen White
Description: This 3mm Halogen White LED light recreates a halogen shade reminiscent of that on classic autos, and the two sizes can be employed to depict headlights, fog lamps, position lights, reverse lamps and so on. Feature: Use with Item 53909 Material: Plastic Color: White Package contains 2 high-brightness LEDs which can be effortlessly connected to the Tamiya TLU-01 Light Control Unit NOTE: Not compatible with Multi-Function Control Units Items 53957, 56511 and 56523 Include: Tamiya LED Light φ3 Halogen White (1 set)

139,-

KJØP
Hovedbilde RC4WD T0069 Interco Super Swamper TSL/Bogger Micro ... Hovedbilde RC4WD T0069 Interco Super Swamper TSL/Bogger Micro ...
RC4WD T0069 Interco Super Swamper TSL/Bogger Micro ...
2x RC4WD Interco Super Swamper TSL/Bogger 1.0" Micro Crawler Tires This is the new Interco Super Swamper TSL/Bogger tire for the scaler market. This is the tallest 1.9" tire to hit the market. This tire lives up to the looks and height of its full scale counterpart. Get ready for the mud. Specifications: Outer Diameter: 1.95 (49.5mm) Width: .0.73" (18.6mm) Inner Diameter: 25.5mm / 1.00inch Advanced X3 Soft Compound Designed to fit Losi Micro Crawler or RC4WD Micro Crawler Wheels Each Tire Weight: 0.3 oz / 9 g Shown installed on our Losi Trekker Test Rig (Not Included) What's Included: 2x RC4WD Interco Super Swamper TSL/Bogger 1.0" Micro Crawler Tires 2x Foam Inserts Interco Sticker Sheet Notes: Due to many different methods to design tires and wheels, we have no control over other manufacturers products. So we can only tell you that RC4WD tires and wheels work together. In some cases our wheels and tires will work with other brand wheels and tires, but we can not guarantee the outcome Interco is a registered trademark of the Interco Tire company. The Interco logo is property of Interco Tire Company and used under license to RC4WD.

149,-

159,-

KJØP
-6%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png