Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Dempere og Fjærer / RC4WD D0005 Ultimate Scale Shocks 80mm Silver
-6%

RC4WD D0005 Ultimate Scale Shocks 80mm Silver

Art.nr: D0005

469,-

499,-

- 6%
RC4WD

RC4WD
På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is a pair of RC4WD 80mm Ultimate Scale Shocks in Silver.

FEATURES

Fits front, middle and rear of "The Beast" Blackwell 2.5T 6x6

front and rear of the RC4WD Trail Stomper Truck

Yota Scale Truck

Subzero 1/10 Scale Steel Truck

front of the King of Hammer Scale Crawler

rear of the RC4WD Trail Finder 2 Truck Kit w/Mojave Body

Constructed of heat treated CNC machined aluminum

Super soft steel internal coil springs

Steel rod end balls

INCLUDES

Two RC4WD 80mm Ultimate Scale Shocks

REQUIREMENTS

Two sets are required for one vehicle

SPECIFICATIONS

Hole to Hole (Compressed): 2.44" (62mm)

Hole to Hole (Uncompressed): 3.14" (80mm)

Overall Length: 3.54" (90mm)

Travel Length: 0.79" (20mm)

Shock Body Outer Diameter: .35" (9mm)

Shaft Outer Diameter: 0.12" (3mm)

COMMENTS

These shocks do not use oil. Only use a small amount to keep theshaft lubricated.

Produsent

RC4WD

RC4WD

Kunder kjøpte også

Hovedbilde Traxxas 6864 Springs Front +20% Rate Blue Slash 4x4 ...
Traxxas 6864 Springs Front +20% Rate Blue Slash 4x4 ...
This is a pair of Blue Rate Front Shock Springs for the Traxxas Slash. FEATURES: Steel construction, white in color           Blue firmness rating           +20% progressive compression INCLUDES: Two Blue Rate Rear Shock Springs for the Traxxas Slash REQUIRES: Installing over outside of shocks SPECS:    Height: 2.4" (62mm)           Wire Diameter: 0.06" (1.5mm)

59,-

KJØP
Hovedbilde Traxxas 2742 Rod Ends w/Connectors (6)
Traxxas 2742 Rod Ends w/Connectors (6)
These are 5.8mm ball ends and balls.

49,-

59,-

KJØP
-17%
Hovedbilde Traxxas 3760 Black Shocks Long (2)
Traxxas 3760 Black Shocks Long (2)
This is a pair of replacement front shocks for the Traxxas Stampede and  Rustler trucks. The shock bodies are made of black plastic and there are four  spring pre-load spacers (to vary the spring tension) for each shock.   INCLUDES  Two UNASSEMBLED long front shocks with pre-load spacers  Two medium springs  One 1/2 ounce bottle shock oil (approx. 30 weight)   COMMENTS  Instructions are not included for assembling these shocks, refer to the  the truck kit instructions.

239,-

KJØP
Hovedbilde Dynamite 2531 1/2 Machined Aluminum Servo Arm: Fut ...
Dynamite 2531 1/2 Machined Aluminum Servo Arm: Fut ...
These ½ arms are drilled and tapped for 3mm-linkage hardware and offer maximum steering control, as well as instantaneous throttle and brake response by eliminating the flex you often get with nylon and plastic servo arms. The “full” arm has drilled and tapped holes, as well as “blank” holes to house a wide range of throttle and brake linkage requirements.

79,-

139,-

KJØP
-43%
Hovedbilde Traxxas 3957 Spur Gear 0.8P 56T
Traxxas 3957 Spur Gear 0.8P 56T
This is the 56 Tooth Spur Gear. FEATURES: Nylon construction           Black in color           .8 metric pitch INCLUDES: One 56T 0.8 Pitch Spur Gear REQUIRES: Assembly onto vehicle

39,-

KJØP
Hovedbilde K&S 543955 1 Meter Round Brass Rod 3 mm diameter (1 ...
K&S 543955 1 Meter Round Brass Rod 3 mm diameter (1 ...
K&S 543955 1 Meter Round Brass Rod 3 mm diameter (1 stk) Totalt 1stk 1meter x 3mm.

59,-

KJØP
Hovedbilde Yeah Racing BBG-0055BK Aluminum Big Bore Go 55mm ... Hovedbilde Yeah Racing BBG-0055BK Aluminum Big Bore Go 55mm ...
Yeah Racing BBG-0055BK Aluminum Big Bore Go 55mm ...
Yeah Racing Aluminum Big Bore Go 55mm Damper Set 4pcs for 1/10 RC Touring Car Black Description: Big Bore Go! Purchase this set of big-bore shocks, add oil, and off you go! Includes two different types of mounting pillow ball studs for different types of cars! Included are different springs for you to fine-tune your ride so you don't have to go looking for different springs after purchasing our set of shocks! If you really want to get serious with tuning, there are different holes of pistons included so you can adjust how the shock reacts to the shock oil. *Photos for reference only. Feature: For: RC Car Material: Aluminum Include: Aluminum Big Bore Go Dampers (4 pcs) Soft Springs - Red (4 pcs) Medium Springs - Yellow (4 pcs) Hard Springs - Blue (4 pcs) Pillow Balls (8 pcs) Ballstuds (8 pcs) Threaded Ballstuds (8 pcs) Pistons (8 pcs)

439,-

459,-

KJØP
-4%
Hovedbilde Yeah Racing YB6009B/S10 RC PTFE Bearing (4x8x3mm) ...
Yeah Racing YB6009B/S10 RC PTFE Bearing (4x8x3mm) ...
Yeah Racing RC PTFE Bearing (4x8x3mm) 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6009BS/10) RC Telfon Bearing (4x8x3mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation:   High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

69,-

KJØP
Hovedbilde Yeah Racing YB6023B/S10 RC PTFE Bearing (10x15x4mm) ... Hovedbilde Yeah Racing YB6023B/S10 RC PTFE Bearing (10x15x4mm) ...
Yeah Racing YB6023B/S10 RC PTFE Bearing (10x15x4mm) ...
Yeah Racing RC PTFE Bearing (10x15x4mm) 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6023BS/10) RC Telfon Bearing (10x15x4mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

99,-

119,-

KJØP
-17%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png