Hopp til innhold
Hjem / Masse Diverse / RC4WD-produkter / RC4WD 0052 1/10 High Performance LED Light Bar (20mm/.75")

RC4WD 0052 1/10 High Performance LED Light Bar (20mm/.75")

Art.nr: E0052

389,-

RC4WD

RC4WD
På lager: 4

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

RC4WD 1/10 High Performance LED Light Bar (20mm/.75")


This is a all new High Performance Lightbar for any RC. Will make any project look better and add much needed lighting.

 

Specifications:

  • Cast Molded Housing
  • Reversible "L" brackets to fit many applications
  • Adjustable "L" brackets for rotating light
  • 6 Individual LED bulbs
  • Super Bright Lighting
  • Vented on side to dissipate heat
  • Works with up to 3 Cell lipo with use of a BEC to regulate voltage below 7.4 volts
  • Standard Receiver Plug
  • Connects to extra channel on receiver
  • 2mm Mounting Holes
  • Overall Length: 1.41in / 35.9mm
  • Light Bar Width: 0.78in / 20mm
  • Overall Height: 0.81in / 20.8mm
  • Light Bar Height: 0.63in / 16.2mm
  • Weight: 0.56oz / 16g

 

Detail like no other lights out there. We leave our competition in the dark.

Produsent

RC4WD

RC4WD

Relaterte produkter

 

Hovedbilde RC4WD 0059 KC HiLiTES 1/10 C Series Hi Perform LED ...
RC4WD 0059 KC HiLiTES 1/10 C Series Hi Perform LED ...
Art.nr: E0059
Copied
This is the 1/10 scale KC HiLiTES High Performance LED Light Bar from RC4WD. FEATURES Works with lipo 2 cells 7.4V, DONT use 3 cells 11.1 volt. Cast aluminum housing vented on side to dissipate heat Reversible "L" Brackets fit many applications Adjustable "L" Brackets for rotating light 44 individual super bright lights Standard receiver plug connects to extra receiver channel INCLUDES KC HiLiTES High Performance LED Light Bar with Wire Lead and Receiver Connector and KC HiLiTES Decal Sheet SPECIFICATIONS Mounting Hole: Diameter: 0.079" (2mm) Overall Length: 4.8" (122mm) Light Bar Width: 3.93" (100mm) Overall Height: 0.82" (20.9mm) Light Bar Height: 0.63" (16.2mm) Weight: 1.62oz (48g)

599,-

629,-

KJØP
-5%
Hovedbilde RC4WD 0055 1/10 High Performance LED Light Bar
RC4WD 0055 1/10 High Performance LED Light Bar
Art.nr: E0055
Copied
This is the RC4WD 1/10 scale High-Performance LED Light Bar.     FEATURES For a variety of applications on 1/10 scale vehicles, reversible  "L" brackets to fit many applications  Works with up to 3-cell LiPo with use of a BEC to regulate voltage  below 7.4V  Thirty two individual LED bulbs  Adjustable "L" brackets for rotating light  Standard receiver plug connects to extra receiver channel  2mm mounting holes   INCLUDES RC4WD 1/10 scale High-Performance LED Light Bar   SPECIFICATIONS  Overall Length: 3.76" (95.5mm)  Light Bar Width: 2.95" (75mm)  Overall Height: 0.82" (21mm)  Light Bar Height: 0.63" (16.2mm)  Weight: 1.2oz (34g)

549,-

599,-

KJØP
-8%
Hovedbilde RC4WD E0061 KC HiLiTES 1/10 C Series High Performance ... Hovedbilde RC4WD E0061 KC HiLiTES 1/10 C Series High Performance ...
RC4WD E0061 KC HiLiTES 1/10 C Series High Performance ...
Art.nr: E0061
Copied
RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (150mm/6") This is the all new Licensed KC HiLiTES Light bar. These have been Officially Licensed by the KC HiLiTES Company and are only available from RC4WD and our Dealers. Will make any project look better and add much needed lighting.   Specifications: Cast Molded Housing Reversible "L" Brackets to fit many Applications Adjustable "L" Brackets for Rotating Light 64 Individual LED Bulbs Super Bright Lighting Vented on side to Dissipate Heat Works with up to 11.1v Lipo with use of a BEC to Regulate Voltage below 7.4 Volts Standard Receiver Plug Connects to Extra Channel on Receiver 2mm Mounting Holes Overall Length: 6.7in / 170.5mm Light Bar Width: 5.9in / 150mm Overall Height: 0.82in / 21mm Light Bar Height: 0.63in / 16.2mm Weight: 2.43oz / 69g   What's Included: 1x RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (150mm/6") 1x KC HiLiTES Decal Sheet   Replacement Hardware: 20x M1.5 X 5mm SHCS (Silver) 6x M1.6 X 6mm Phillips Head Machine Screws (Silver) (Z-S1387) RC4WD Light Bar Knurled Nuts (Z-S1484)   Optional Parts: Y Harness with Tamiya Connectors for Light Bars (Z-S1601) RC4WD Mini ON/OFF Switch for Lighting Unit (Z-E0081) RC4WD Strobe Lighting Unit (Z-S1573) Notes: Use medium grade threadlock on "L"bracket nut to prevent loss and to keep the light in position. Mounting hardware can be found here. M2 SHCS / M2 BHSC While the lightbar comes with a standard receiver plug, this is only for ease of use. The receiver will not allow enough power for the lightbar and it will be dim. If you want the light to be bright, you will need to power it directly from your battery, or use a BEC to get more power to your receiver. This product has been tested and approved by the Recon G6. It is Recon G6 Certified. KC HiLiTES and the KC HiLiTES name are registered trademarks of KC HiLiTES Company. The KC and KC HiLiTES logo is property of KC HiLiTES Company and used under license to RC4WD.

599,-

649,-

KJØP
-8%
Hovedbilde RC4WD E0095 KC HiLiTES 1/10 C Series High Performance ... Hovedbilde RC4WD E0095 KC HiLiTES 1/10 C Series High Performance ...
RC4WD E0095 KC HiLiTES 1/10 C Series High Performance ...
Art.nr: E0095
Copied
RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (120mm/4.72") This is the all new Licensed KC HiLiTES Light Bar and is sure to brighten up any project with much needed lighting! This has been Officially Licensed by the KC HiLiTES Company and is only available from RC4WD and our Dealers.    Specifications: Cast Molded Housing Black Anodized Finish Reversible "L" Brackets to fit many Applications Adjustable "L" Brackets for Rotating Light Super Bright Lighting Vented on Side to Dissipate Heat Works with up to 11.1v LiPo with use of a BEC to regulate voltage below 7.4 volts Standard Receiver Plug Connects to Extra Channel on Receiver 2mm Mounting Holes Overall Length: 5.43in / 137.9mm Light Bar Width: 4.88in / 124mm Overall Height: 0.83in / 21.2mm Light Bar Height: 0.63in / 16.2mm Weight: 1.80oz / 51g     What's Included: 1x RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (120mm/4.72") 1x KC HiLiTES Decal Sheet Optional Parts: RC4WD Strobe Lighting Unit (Z-S1573) Y Harness with Tamiya Connectors for Lightbars (Z-S1601) RC4WD Mini ON/OFF Switch for Lighting Unit (Z-E0081) RC4WD Strobe Lighting Unit (Z-S1573) Notes: Fits RC4WD Trail Finder 2 RTR w/Mojave II Body Set (Z-RTR0024) Fits  RC4WD Gelande II RTR Truck Kit w/D90 Body Set (Z-RTR0031) Fits RC4WD Gelande II RTR Truck Kit w/Cruiser Body Set (Z-RTR0029) Fits RC4WD Gelande II D110 Truck Kit With Hard Body (Z-K0047) Fits Tube Rear Bumper for Axial SCX10 II XJ (Red) (VVV-C0341) Fits RC4WD Mojave II Body Set for Trail Finder 2 (Primer Gray) (Z-B0084) Fits RC4WD 1/10 Gelande II D110 Hard Plastic Body Kit (Z-B0064) KC HiLiTES and the KC HiLiTES name are registered trademarks of KC HiLiTES Company. The KC and KC HiLiTES logo is property of KC HiLiTES Company and used under license to RC4WD.

599,-

629,-

KJØP
-5%
Hovedbilde RC4WD E0054 1/10 High Performance LED Light Bar 40mm
RC4WD E0054 1/10 High Performance LED Light Bar 40mm
Art.nr: E0054
Copied
This is the RC4WD 1/10 scale High-Performance LED Light Bar. FEATURES For a variety of applications on 1/10 scale vehicles, reversible "L" brackets to fit many applications Works with up to 3-cell LiPo with use of a BEC to regulate voltage below 7.4V Fourteen individual LED bulbs Adjustable "L" brackets for rotating light Standard receiver plug connects to extra receiver channel 2mm mounting holes INCLUDES RC4WD 1/10 scale High-Performance LED Light Bar SPECIFICATIONS Overall Length: 1.41" (35.9mm) Light Bar Width: 0.78" (20mm) Overall Height: 0.81" (20.8mm) Light Bar Height: 0.63" (16.2mm) Weight: 0.88oz (25g)

459,-

499,-

KJØP
-8%

Kunder kjøpte også

Hovedbilde Yeah Racing WL-0165BK Aluminum CNC 5 Spoke Beadlock ... Hovedbilde Yeah Racing WL-0165BK Aluminum CNC 5 Spoke Beadlock ...
Yeah Racing WL-0165BK Aluminum CNC 5 Spoke Beadlock ...
Description: Wheelset with high grip rubber tires for Axial's SCX24, featuring aluminum wheels which you won't have to worry about rusting! Beadlock wheels meaning you will be able to swap tires to your liking!     Feature:   For: Axial SCX24 Element Enduro 24 Material: Aluminum Rim & Rubber Tire Color: Black Hex: 7mm Outer Diameter: 53mm Width: 18mm   Include:   Wheels with Tires (4 pcs)

849,-

899,-

KJØP
-6%
Hovedbilde Tamiya 87051 Epoxy Putty (Quick Type)
Tamiya 87051 Epoxy Putty (Quick Type)
Epoxy Putty (Quick Type)

79,-

KJØP
Hovedbilde Traxxas 2746 Metal Washers 3x6mm (12)
Traxxas 2746 Metal Washers 3x6mm (12)
These are 3x6mm Washers from Traxxas. FEATURES: Metal construction INCLUDES: (12) Washers SPECS:    Size:  3x6mm

25,-

30,-

Ikke på lager
-17%
Hovedbilde Tamiya 86030 PS-30 Polycarb Spray Brilliant Blue 3 oz
Tamiya 86030 PS-30 Polycarb Spray Brilliant Blue 3 oz
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-30 Brilliant Blue).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
Hovedbilde Tamiya 86055 PS-55 Polycarb Flat Clear 3 oz
Tamiya 86055 PS-55 Polycarb Flat Clear 3 oz
This is the PS-55 Flat Clear Spray from Tamiya. FEATURES: Makes it possible to give your RC vehicle the same matte finish            as the actual racing car           Can be applied to all colors           For use on polycarbonate surfaces INCLUDES: One 100ml Spray Can of Flat Clear Tamiya Color REQUIRES: Removing protective film from body before spraying

109,-

KJØP
Hovedbilde Tamiya 81701 Acrylic Mini XF-1 Flat Black 1/3 oz
Tamiya 81701 Acrylic Mini XF-1 Flat Black 1/3 oz
  This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin,             styrofoam and wood.           Excellent for either brush or spray painting.           Covers well, flows smoothly with no blushing or fading, and can be             blended easily.           Jar will accept standard airbrush lid.           Can be washed away with plain water if done prior to curing.           Available in 19 glossy, 45 flat and 7 translucent colors plus an             exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Flat Black paint. REQUIRES: Paint Brush or Airbrush to apply to model.           Eye, Lung and Skin protection.           Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children.           Highly Flammable Paint.           For Adult Modelers Only.

29,-

39,-

KJØP
-26%
Hovedbilde Tamiya 81702 Acrylic Mini XF-2 Flat White 1/3 oz
Tamiya 81702 Acrylic Mini XF-2 Flat White 1/3 oz
This is a 10ml Jar of Tamiya color Acrylic Paint "Mini" (Flat White).                      For Adult Modelers Age 14 and Older. FEATURES: Handy paint for hobby use.           Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin and             styrofoam.           It can be washed away with plain water if done prior to curing.           Glass jar with a plastic, color coded, screw-on lid.           Paint number XF-2 on the Tamiya Color Chart. INCLUDES: One Jar of Acrylic Paint "Mini" (Flat White) REQUIRES: Stir Stick SPECS:    Volume:  10ml  (1/3 fl oz)

30,-

KJØP
Hovedbilde Tamiya 87033 Masking Tape Refill 6mm
Tamiya 87033 Masking Tape Refill 6mm
This is a 6 Meter Roll of 6mm Tamiya Masking Tape Refill. FEATURES: This is a thin, self-adhesive paper tape, developed for model             applications.           Flexible.           Easily applied to curved surfaces making it ideal for masking off             areas for painting, etc. INCLUDES: One Roll Of Masking Tape SPECS:    Length: 6m           Width:  6mm

49,-

KJØP
Hovedbilde Hitec 56411 TAMIYA SERVO SAVER (OLD TYPE(WHITE), NEW ...
Hitec 56411 TAMIYA SERVO SAVER (OLD TYPE(WHITE), NEW ...
Tamiya Servo Saver som passer HiTec 24 splines

18,-

KJØP
Hovedbilde Poly-Zap CA 1/2OZ PT-22
Poly-Zap CA 1/2OZ PT-22
    MEDIUM VISCOSITY     MULTI PURPOSE FORMULA     STRONG AND FLEXIBLE      DRIES CLEAR     IDEAL FOR LEXAN PT-22   1/2 oz. Poly-Zap POLY ZAP Is a specialty CA adhesive developed for use on today’s newer plastics. Lexan is one of the more difficult plastics to bond, and POLY ZAP was developed to solve that problem. It works on many types of films and painted surfaces. Its perfect for today’s ARF type models. ABS cowls, canopies, Lexan car bodies, fiberglass repair, model boat parts, and automotive trim are just a few of the many applications for POLY ZAP. To prevent fogging of clear parts do not use a Kicker. Works best on: ABS Delron Fiberglass Lexan Most Acrylics Polycarbonate Nylon Rubber Styrene

99,-

KJØP
Hovedbilde Traxxas 4341 Tie-Rod Set 4-Tec (8)
Traxxas 4341 Tie-Rod Set 4-Tec (8)
This is the Replacement Tie-Rod Set for the Traxxas 4-Tec.  This set includes Steering and Camber Links.     FEATURES Black nylon rod ends  Steel studs   INCLUDES Eight rod ends  Eight 5.8mm studs  Four 18mm threaded rods   REQUIREMENTS Installation onto 4-Tec

89,-

KJØP
Hovedbilde Tamiya 87177 Masking Tape for Curves 2mm
Tamiya 87177 Masking Tape for Curves 2mm
This is the 2mm Wide Masking Tape for Curves from Tamiya.     FEATURES Constructed of soft resin material that allows tape to adhere in a  curve while preventing paint from seeping into masked-off areas  Use of narrower tape is recommended for sharper curves   INCLUDES 2mm Wide Masking Tape for Curves   SPECIFICATIONS  Width: 0.079" (2mm)  Length: 65.6' (20m)

69,-

KJØP
Hovedbilde Traxxas 6468 Tire Glue TRX Ultra Premium Hovedbilde Traxxas 6468 Tire Glue TRX Ultra Premium
Traxxas 6468 Tire Glue TRX Ultra Premium
  Traxxas Ultra Premium Tire Glue Ultra Premium Tire Glue (#6468) with packageOnly one tire glue is certified for use with the 100+mph XO-1: Traxxas Ultra Premium Tire Glue. The XO-1 relies on a high-strength tire bond to withstand incredible centrifugal forces at speeds in excess of 100mph. No other glue endures such high loads, which makes Traxxas Ultra Premium Tire Glue the ultimate adhesive for any tire and rim combination (and any other application that requires a high-strength bond).  To preserve the maximum bonding power of Traxxas Ultra Premium Tire Glue, its bottle is specially designed to maintain a tight seal and prevent clogging. The bottle and nozzle are made of glue-resistant material, and a pin integrated into the tightly-fitting screw-on cap assures glue won't clog the bottle tip. The tip's fine opening allows precise glue application every time you reach for Traxxas Ultra Premium Tire Glue. Traxxas Ultra Premium Tire Glue is custom-blended exclusively for Traxxas. There simply is no better bond for high-speed, high-power vehicles. Traxxas Ultra Premium Tire Glue Features:   The only glue Traxxas Certified for the 100+mph XO-1 Highest-quality cyanoacrylate (CA) glue available Fine tip opening for precise glue application Tightly-fitting cap with sealing pin Glue-resistant bottle and tip material Includes two precision application tips Content 20gr    

139,-

159,-

KJØP
-13%
Hovedbilde Traxxas 8073X Mirrors chrome (left & right) (fits ...
Traxxas 8073X Mirrors chrome (left & right) (fits ...
Mirrors, side, chrome (left & right)/ retainers (2)/ body clips (4) Fits Traxxas 8010 Body

85,-

KJØP
Hovedbilde Tamiya 70127 Clear Pla Plate 0.4mm thick B4 Size 4pcs
Tamiya 70127 Clear Pla Plate 0.4mm thick B4 Size 4pcs
Tamiya 70127 Clear Pla Plate 0.4mm thick B4 Size 4pcs

129,-

KJØP
Hovedbilde Tamiya 70057 5mm Round Road 400mm (10) Hovedbilde Tamiya 70057 5mm Round Road 400mm (10)
Tamiya 70057 5mm Round Road 400mm (10)
Tamiya 70057 5mm Round Road 400mm (10) Can be used in Scratch Builders, Art School, Architects and more!

79,-

KJØP
Hovedbilde Traxxas 2581X Screws M3x25 Cap-head Hex Socket (6)
Traxxas 2581X Screws M3x25 Cap-head Hex Socket (6)
Screws M3x25 Cap-head Hex Socket (6)

29,-

KJØP
Hovedbilde Pro-Line 617400 1.9
Pro-Line 617400 1.9" Dual Stage Closed Cell Foam ...
This is a pair of Pro-Line 1.9" Dual Stage Foam Inserts for Pro-Line 1.9" XL Tires. FEATURES Fits the following Pro-Line tires; #1197-14 Interco TSL SX Super Swamper 1.9" #10112-00 Flat Iron XL 1.9" #10118-14 BF Goodrich T/A KR2 1.9" #10128-14 Hyrax 1.9" Lightweight and waterproof blue closed cell inner foam construction Outer made from soft open cell foam that provides maximum grip while maintaining a fully supported sidewall for greater side hilling performance INCLUDES Two Pro-Line 1.9" Dual Stage Foam Inserts in Blue and White SPECIFICATIONS Diameter: 4.15" (120mm) Width: 1.60" (41mm) Outer Thickness: 0.75" (19mm)

269,-

299,-

KJØP
-10%
Hovedbilde FrSky X9D Plus Switch 3-way short
FrSky X9D Plus Switch 3-way short
FrSky X9D Plus Switch 3-way short

39,-

49,-

KJØP
-20%
Hovedbilde HPI 160155 Racing Plazma 6V 1200mAh NiMH
HPI 160155 Racing Plazma 6V 1200mAh NiMH
This is the HPI Plazma NiMH 6.0V 1200mAh Flat Receiver Battery Pack.     FEATURES Sized to fit the HPI Ken Block and Falken Micro RS4 vehicles   INCLUDES Plazma NiMH 6.0V 1600mAh Hump Receiver Battery Pack with BEC  Connector   REQUIREMENTS NiMH compatible charger   SPECIFICATIONS  Capacity: 1200mAh  Number of Cells in Series: 5  Rated Voltage: 6.0V  Weight:  115g  Pack Dimensions: 2.7 x 1.9 x 0.59" (70.5 x 50 x 15mm)

179,-

199,-

KJØP
-10%
Hovedbilde RC4WD S1237 King Kong Tow Shackle Orange Hovedbilde RC4WD S1237 King Kong Tow Shackle Orange
RC4WD S1237 King Kong Tow Shackle Orange
This is the King Kong Tow Shackle in Orange from RC4WD.   FEATURES Heavy duty steel construction Fits 0.12" (3mm) diameter mounting hole Extremely scale appearance   INCLUDES King Kong Tow Shackle M3 x 12mm Screw in Silver   SPECIFICATIONS Total Width: 0.51" (12.80mm) Total Length: 0.78" (19.72mm) Inner Wall Maximum Width: 0.24" (6.08mm) Inner Wall Narrowest Width: 0.18" (4.58mm) Inner Wall Length: 0.49" (12.41mm) Hole to Hole Width: 0.16" (4.03mm) Weight: 0.14oz (4g)

119,-

139,-

KJØP
-14%
Hovedbilde BSD 7003W WATER PROOF 7003W ESC BRUSHED 1/10 Hovedbilde BSD 7003W WATER PROOF 7003W ESC BRUSHED 1/10
BSD 7003W WATER PROOF 7003W ESC BRUSHED 1/10
WATER PROOF SPEEDCONTROLLER BRUSHED ESC for bil, SPRUTSIKKER DEANS KONTAKT   WP1040 BRUSHED : Constant 45A Input: 4-9 cells NiMH/NiCd or 2-3S LiPo.   BEC: 5V/2A 

499,-

529,-

KJØP
-6%
Hovedbilde RC4WD S0588 Chubby 6 Ton Scale Jack Stands
RC4WD S0588 Chubby 6 Ton Scale Jack Stands
This is a pair of RC4WD Chubby 6 Ton Jack Stands for 1/10 scale Vehicles.   FEATURES Fully functional jack stands lift 1/10 scale vehicles to work on or  for display  Cast aluminum construction with powder coated finish, and chrome  plated handle   INCLUDES Two Chubby 6 Ton Jack Stands for 1/10 scale Vehicles   SPECIFICATIONS  Height: 2.87" (72.9mm) with lift section fully lowered  Width at Base: 1.75" (44.7mm)  Length at Base: 1.96" (50mm)

199,-

299,-

KJØP
-33%
Hovedbilde Absima 2320014 Tool Set - Scale 1:10
Absima 2320014 Tool Set - Scale 1:10
Denne er rød og svart.       (14)

45,-

KJØP
Hovedbilde IMAXRC B6AC-PRO AC/DC Charger 220V og 12V Hovedbilde IMAXRC B6AC-PRO AC/DC Charger 220V og 12V
IMAXRC B6AC-PRO AC/DC Charger 220V og 12V
En rimelig men en lader med høy kvalitet. Meget nøyaktig ballansering av LIxx batterier, og meget stabil i ladestrømmen. Den er mikroprosessor styrt, som gjør at den blir meget nøyaktig, også på Delta peak cut off for NiMh og NiCd. 12V + 220V inngangspenning gjør at den er fleksibel. Gjør seg like gjerne på feltet som å hobbyrommet. Funksjoner: * Mikroprosessorstyrt Delta-peak-følsomhet. * Individuell cellebalansering for Li-ion, LiPo og LiFe-kompatibel samt Ni-Cd og NiMH-kompatibel * Stort utvalg av ladestrømmer Lagringsfunksjon, og har optimalisert lagrings program * Tidsbegrensningsfunksjon – for optimal sikkerhet. * Overvåking av inngangsspenning. (Beskytter bilbatterier på feltet) * Datalagring (Lagre opptil 5 pakker i minnet) * Vedlikehold og cycling av batterier * Støtte ny generasjon 123 system (LiFe) batteri Spesifikasjoner: * Driftsspenningsområde: DC11.0-18.0V / AC til DC-adapter (DC11.0-18.0V / 5A) * Kretseffekt: Maks. ladeeffekt 50W / Maks. utladningseffekt 5W Ladestrømområde: .1 ~ 5.0A * Utladningsstrømområde: 0,1-1,0A * Strømavløp for balansering av Li-po: 300mAH / celle * LiIon / LiPo / Livsceller: 1-6 * NiCd / NiMH-celler: 1-15 * Pb batterispenning: 2 ~ 20v * Enhetspakke bruttovekt: 580g * Dimensjoner: 133x87x33mm I pakken: 1 x IMAX B6 AC 50W 1 x strømadapter 1 x ladekabel (XT60, Hitec / JR / Futaba, BEC, Krokodille klemmer, Glow Driver kontakt

749,-

799,-

KJØP
-6%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png