Traxxas

Radient Reactor 0007 Croc Clip Large Bullet Connection

Art.nr: RDNA0007

65,-

Modelsport AS

Modelsport AS

På lager: 4

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Krokodille klemmer med bullet tilkobling.

Stor type.

Produsent

Modelsport AS

Modelsport AS

Kunder kjøpte også

Hovedbilde Bronto XH 6s - Balanseringsforlenger 30cm

Hovedbilde Bronto XH 6s - Balanseringsforlenger 30cm

Bronto XH 6s - Balanseringsforlenger 30cm

Praktisk kabel for å forlenge balanseringskontakten på batterier med XH balanseringskontakt. Gjør det enklere å få sikret ladingen i lipo-ladeposer, eller å lade batteriet uten å ta det ut av modellen. Spesifikasjoner Type XH For antall seller 6s Ledning 22AWG Lengde 30cm

75,-

Hovedbilde Bronto XH Balanseringsforlenger 3s - 20cm

Hovedbilde Bronto XH Balanseringsforlenger 3s - 20cm

Bronto XH Balanseringsforlenger 3s - 20cm

Praktisk kabel for å forlenge balanseringskontakten på batterier med XH balanseringskontakt. Gjør det enklere å få sikret ladingen i lipo-ladeposer, eller å lade batteriet uten å ta det ut av modellen. Spesifikasjoner Type XH For antall seller 3s Ledning 22AWG Lengde 20cm

49,-

Hovedbilde Bronto XH Balanseringsforlenger 2s - 20cm

Hovedbilde Bronto XH Balanseringsforlenger 2s - 20cm

Bronto XH Balanseringsforlenger 2s - 20cm

Praktisk kabel for å forlenge balanseringskontakten på batterier med XH balanseringskontakt. Gjør det enklere å få sikret ladingen i lipo-ladeposer, eller å lade batteriet uten å ta det ut av modellen. Spesifikasjoner Type XH For antall seller 2s Ledning 22AWG Lengde 20cm

39,-

Hovedbilde Turnigy 10993 Twin Charging Harness (6S to 2x3S)

Turnigy 10993 Twin Charging Harness (6S to 2x3S)

Turnigy 10993 Twin Charging Harness (6S to 2x3S) This harness allows you to charge and balance 2 3S packs with a 6S port. Uses JST-XH balance plugs and XT60 discharge plug.

79,-

Hovedbilde Vapex VPLIPOBAGE Storage Bag-E Li-Po 260x130x150mm

Hovedbilde Vapex VPLIPOBAGE Storage Bag-E Li-Po 260x130x150mm

Vapex VPLIPOBAGE Storage Bag-E Li-Po 260x130x150mm

VAPEX LiPo-Safe Storage Bag-E 260x130x150mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. Features: Perfect storage bag for most RC batteries Zipper Flap/Top Bag-A, B, C & D fits inside it Size: 260x130x150mm We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended! Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

169,-

189,-

-11%

Hovedbilde Yeah Racing YE-0019 Li-Po Monitor With LCD Version ...

Yeah Racing YE-0019 Li-Po Monitor With LCD Version ...

Yeah Racing Li-Po Monitor With LCD Version 2S-8S Lipo alarm. Description: This Li-Po detector is designed to measure 1-8 cells Li-Po batteries with a dual buzzer When the voltage is below the set value, it will buzzer with a red LED light Feature: Voltage detection precision: Approx. 0.01V Unit voltage display range: 0.5-4.5v Total voltage display range: 0.5-36V 1S Test model voltage range: 3.7-30V Low voltage alarm model for 2-8S Alarm set value range: OFF-2.7-3.8V Include: Li-Po Monitor with LCD version (1pc)

89,-

Hovedbilde Castle Creations 011003900 Wire 60

Castle Creations 011003900 Wire 60" 20 AWG Black

This is the Castle Creations 60" section of 20AWG Wire with Black Insulation. FEATURES Ideal for many hobby applications Black vinyl insulation INCLUDES 60" section of 20AWG Wire with Black Insulation SPECIFICATIONS Length: 60" (1.52m) Wire Size: 20AWG

195,-

Hovedbilde Dynomaxx 9694 Charge Lead EC5 with 4mm Banana ...

Dynomaxx 9694 Charge Lead EC5 with 4mm Banana ...

DynoMAX B9694 - EC5 Charging Lead for Chargers with 4mm Banana Outputs This is a charging lead for batteries with a EC5 connector. It fits chargers that are equipped with 4mm banana connectors. Specs: Battery Connector: EC5 Charger Connector: 4mm Banana Bullets Wires: 14AWG Length: 500mm

85,-

Hovedbilde Kyosho 32096W Mini-Z MB010 Readyset 4WD Turbo Optima ...

Hovedbilde Kyosho 32096W Mini-Z MB010 Readyset 4WD Turbo Optima ...

Kyosho 32096W Mini-Z MB010 Readyset 4WD Turbo Optima ...

Kyosho Mini-Z MB010 Readyset 4WD Turbo Optima Mid Special - White Real racing buggy performance sits on the palm of your hand. The perfect first (or even second) R/C car! Simply add eight AAA-size alkaline batteries to this Readyset and the MINI-Z Buggy brings the fun of R/C car action. The advanced compact design includes 4WD drive train with slipper clutch to protect the gear system, and 4-wheel independent double wishbone suspension with oil-filled shocks to deliver true racing buggy performance. Most critical components are protected within the high-rigidity dustproof chassis shell. 7-stage geared steering servo provides plenty of torque for precision steering response and combines with the control program to realize the MINI-Z’s signature linear handling and light feel. The circuit board also features manual left/right volume adjustment for the optional gyro unit (sold separately) that stabilizes straight line running and improves cornering control. Modeled on the popular Inferno MP9, the MINI-Z buggy body matches performance with style featuring a distinctive new printed color scheme complimented by black wheels for the sharpest looking machine on the track. The fully pre-assembled Readyset package makes it simple and enjoyable for anyone to experience advanced R/C buggy performance, whether it’s your first car or as fun-driving second car. ※As the Readyset includes the Syncro KT-531P transmitter operating on FHSS 2.4GHz, it cannot be used with ASF/MHS/FHS 2.4GHz systems. ●Readyset package allows model to be enjoyed straight after purchasing batteries. ●Fully pre-assembled chassis with printed polycarbonate body. ●Real racing performance will please buggy owners. Great for indoor practice. ●Includes Syncro KT-531P transmitter. Allows various setting adjustments such as steering angle. ●FHSS 2.4GHz R/C system removes the need to manage frequency bands. ●Frequency crystals are not required and up to 40 cars can be run at the same time. ●Optional gyro unit set (MZW431) can be installed. Gyro sensitivity can be manually adjusted on the chassis. ●Most optional parts already released for MINI-Z Buggy can be installed.

2.995,-

3.495,-

-14%

Hovedbilde Absima 378WT/7000CPS Silicone Differential Oil 60ml

Absima 378WT/7000CPS Silicone Differential Oil 60ml

Features: Viscosity 7000CPS / 378WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. 1 bottle /60ml

85,-

Hovedbilde Traxxas 6855 Driveshaft Center Aluminum Slash 4x4

Traxxas 6855 Driveshaft Center Aluminum Slash 4x4

This is the Aluminum Center Driveshaft for the Traxxas Slash 4x4 Vehicles. FEATURES: Hollow aluminum construction Anodized blue in color INCLUDES: One Aluminum Center Driveshaft REQUIRES: Installation on the vehicle SPECS: Length: 215mm (8.5") Diameter: 8.3mm (0.33")

125,-

Hovedbilde Dynomax 9412 Extension Lead XH 4S 22AWG 300mm

Dynomax 9412 Extension Lead XH 4S 22AWG 300mm

Extension Balance Lead 4S XH 30cm This is a practical extension lead suitable for Lithium based batteries that are equipped with the popular XH balancing connector. When charging the battery is recommended to be inside an charging/storing safe bag and the original short balance lead/adapter makes it hard to reach. With this extension lead the charging is much easier! Specifications: Cells: 4 Length: 30cm Wires: 22AWG Connectors: JST-XH Male & Female

39,-

Hovedbilde DynoMAX 9690 Charge Lead XT60 with 4mm banana ...

DynoMAX 9690 Charge Lead XT60 with 4mm banana ...

Charge Lead XT60 with 4mm banana connectors

109,-

Hovedbilde Traxxas 2938X Adapter Traxxas ID Li-Po for volt check

Traxxas 2938X Adapter Traxxas ID Li-Po for volt check

The new #2938X Traxxas Balance Lead Adapter enables customers to connect their Traxxas iD batteries to accessory cell voltage checkers without using the EZ-Peak Live app with EZ-Peak Live chargers. The adapter is compatible with 2s, 3s, and 4s Traxxas iD LiPo batteries. NOTE: Do not attempt to use the #2938X adapter for charging or any purpose other than adapting Traxxas iD batteries to accessory cell voltage checkers.

149,-

Hovedbilde Traxxas 2872X LiPo 3S 11.1V 5000mAh 25C w/iD Connector

Traxxas 2872X LiPo 3S 11.1V 5000mAh 25C w/iD Connector

This is the Traxxas Power Cell 11.1V 5000mAh 25C 3S LiPo Battery. FEATURES Semi rigid construction does not require a hard case and eliminates wire harness connectors that can loosen and fail Engineered specifically to fit Traxxas models New high current connector with gold-plated copper terminals and integrated balance connector iD Auto Battery Identification allows Traxxas iD equipped chargers to automatically set and optimize charge settings for specific battery MAXX cable high-efficiency 12 gauge silicone jacketed wire INCLUDES Traxxas Power Cell 11.1V 5000mAh 25C LiPo 3S Battery with High Current Connector and Integrated Balance Plug REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus, LiPo charging bag SPECIFICATIONS Configuration: 3S1P Continuous Discharge: 25C (125A) Max Burst Rate: 50C (250A) Watt Hours: 55.5 Charge Rate: 1C (5A) Max Charge Rate: 2C (10A) Dimensions: 6.1 x 1.02 x 1.7" (155 x 26 x 44mm) Weight: 13.3oz (376g) COMMENTS ALWAYS use a LiPo-approved Charger ALWAYS use a LiPo Cell Balancer NEVER Charge over 4.20V per cell NEVER Charge at currents greater than 1C NEVER Trickle Charge NEVER allow to Discharge below 3.2V per cell NEVER disassemble or modify pack wiring in any way or puncture cells NEVER place on combustible materials or leave unattended during charging ALWAYS Charge in a fireproof location ALWAYS set charger's output volts to match battery volts ALWAYS keep out of reach of children

995,-

1.095,-

-9%

Hovedbilde Savox SC-0252MG PLUS - 0.19speed/10.5kg

Hovedbilde Savox SC-0252MG PLUS - 0.19speed/10.5kg

Savox SC-0252MG PLUS - 0.19speed/10.5kg

Savöx Digital Servo SC-0252MG 4.8V Speed: 0.23 6.0V Speed: 0.19 4.8V Torque: 7.2 kg-cm 6.0V Torque: 10.5 kg-cm Dimensions: 40.7 x 19.6 x 39.4mm Weight: 49 gram Gear: Metal Ballbearing: 2

399,-

439,-

-9%

Hovedbilde Traxxas 7033X Aluminum Heavy Duty Pivot Balls (8)

Traxxas 7033X Aluminum Heavy Duty Pivot Balls (8)

These are the optional Pivot Ball Caps for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Hard anodized aluminum with Teflon coating Replaces stock plastic pivot ball caps INCLUDES: Eight Pivot Ball Caps 5mm Hex Wrench Instruction Sheet REQUIRES: Installation in hub carriers

259,-

299,-

-13%

Hovedbilde Traxxas 1834 Body Clips (12)

Traxxas 1834 Body Clips (12)

Disse passer Traxxas 1/16 biler. These are Replacement Traxxas Body Clips. They can be used on Traxxas or most other brands of cars. FEATURES: Metal clips are silver in color INCLUDES: Twelve body clips SPECS: Length: aprrox. 7/8"

25,-

35,-

-29%

Hovedbilde Traxxas 3934 Body Clips (12)

Traxxas 3934 Body Clips (12)

Heavy-duty body clips hold tightly for the intense, high-flying action of our toughest 1/10 scale vehicles. Sold as a pack of 12. FEATURES: Steel construction Natural polished color INCLUDES: Twelve Body Clips SPECS: Length: 26mm

39,-

Hovedbilde Traxxas 7034 Axle carriers, left & right (1 each)

Hovedbilde Traxxas 7034 Axle carriers, left & right (1 each)

Traxxas 7034 Axle carriers, left & right (1 each)

These are the Left and Right Axle Carriers for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction Black in color INCLUDES: One Left Axle Carrier One Right Axle Carrier REQUIRES: Installation on the vehicle

79,-

Hovedbilde Traxxas 5120 Ball Bearings 12x18x4mm Revo (2)

Traxxas 5120 Ball Bearings 12x18x4mm Revo (2)

These are the replacement Wheel Hub Ball Bearings for the Traxxas Nitro Revo Monster Truck. FEATURES: Stainless Steel Construction Blue Rubber Sealed INCLUDES: Two 12mm x 18mm Blue Sealed Stainless Wheel Hub Bearings REQUIRES: Assembly onto Vehicle SPECS: Outer Diameter: 18mm (0.70") Inner Diameter: 12mm (0.47") Thickness: 4mm (0.15") COMMENTS: These are for the Inside of the Wheel Hubs, the Truck Requires Four Total of these Bearings.

109,-

Hovedbilde Traxxas 5378X Pivot Ball Caps (4) Dust Boots Rubber ...

Traxxas 5378X Pivot Ball Caps (4) Dust Boots Rubber ...

This is the replacement Pivot Ball and Dust Cap Boot Set for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles. FEATURES: Nylon and Rubber Construction Blue and Black in Color INCLUDES: Four Blue Rubber Pivot Ball Boots Four Black Dust Boot Retainer Four Blue Notched Dust Boot Retainer Four Blue Rubber Boot Plugs Four nylon Pivot Ball Retainers Instruction sheet REQUIRES: Two packages needed to complete truck

89,-

99,-

-10%

Hovedbilde Traxxas 5334R Axle Carrriers Left & Right/Bearing ...

Traxxas 5334R Axle Carrriers Left & Right/Bearing ...

These are the Optional Axle Carriers L & R for use on the Traxxas Revo series, E-Maxx, T-Maxx and Summit FEATURES: Nylon Construction Black in Color Allows for Oversized Bearing use INCLUDES: One Left Axle Carrier One Right Axle Carrier Four Dust Boot Retainers Two Bearing Spacers REQUIRES: Installation

109,-

119,-

-8%

Hovedbilde Traxxas 5180 Ball Bearings 6x13x5mm E-Revo (2)

Traxxas 5180 Ball Bearings 6x13x5mm E-Revo (2)

This is a set of Traxxas 6x13x5mm Ball Bearings for use on the E-Revo FEATURES: Stainless Steel bearing construction Blue rubber dirt shields INCLUDES: (2) 6x13x5mm ball bearings Part #5180 SPECS: Inside diameter: 6mm (0.24") Outside diameter: 13mm (0.51") Width: 5mm (0.20")

65,-