Traxxas

Radent Reaktor Body Clip Retainer Blue 10 Clip 2 Retainer

Art.nr: RDNA0304

39,-

Modelsport AS

Modelsport AS

** Ikke på lager

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

En smart sak som festes på karosseriet og som tar vare på dine karosseri klips. Ved å bruke denne slipper du å miste dine karosseri klips.

Leveres med 2 «fester» som tar vare på 2 stk klips.

10 Stk klips medfølger.

Produsent

Modelsport AS

Modelsport AS

Relaterte produkter

Hovedbilde Radient Reaktor 0305 Body Clip Retainer Red 10 Clip 2 ...

Radient Reaktor 0305 Body Clip Retainer Red 10 Clip 2 ...

Art.nr: RDNA0305

Copied

En smart sak som festes på karosseriet og som tar vare på dine karosseri klips. Ved å bruke denne slipper du å miste dine karosseri klips. Leveres med 2 «fester» som tar vare på 2 stk klips. 10 Stk klips medfølger. Leveres i Rød

39,-

Hovedbilde Radient 0306 Body Clip Retainer White 10 Clip 2

Radient 0306 Body Clip Retainer White 10 Clip 2

Art.nr: RDNA0306

Copied

Body Clip Retainer White 10 Clip 2 Retainer En smart sak som festes på karosseriet og som tar vare på dine karosseri klips. Ved å bruke denne slipper du å miste dine karosseri klips. Leveres med 2 «fester» som tar vare på 2 stk klips. 10 Stk klips medfølger.

39,-

Kunder kjøpte også

Hovedbilde Associated 7230 Ball End Cups T3 (12)

Associated 7230 Ball End Cups T3 (12)

This is a replacement parts set for the RC10T3 truck. INCLUDES: Twelve ball cups on a plastic parts tree - These are made of a black nylon and are for 4-40 threaded rods. Notes: These are the cups that screw into a rod (like a tie rod or an upper sus- pension linkage rod) and "cup" over the linkage ball. This can be used as an upgrade for any 4-40 ball cups. They appear to be made out of a stronger material than the "standard" Associated cups.

119,-

Hovedbilde Traxxas 3647 Nuts 4mm Flanged Nylon Locking Steel (8)

Traxxas 3647 Nuts 4mm Flanged Nylon Locking Steel (8)

This is the Traxxas Flanged Nylon Locking Nuts. FEATURES: Steel serrated construction INCLUDES: Eiqht 4mm flanged nylon locking nuts SPECS: Outside diameter: 7mm

39,-

Hovedbilde Traxxas 6855 Driveshaft Center Aluminum Slash 4x4

Traxxas 6855 Driveshaft Center Aluminum Slash 4x4

This is the Aluminum Center Driveshaft for the Traxxas Slash 4x4 Vehicles. FEATURES: Hollow aluminum construction Anodized blue in color INCLUDES: One Aluminum Center Driveshaft REQUIRES: Installation on the vehicle SPECS: Length: 215mm (8.5") Diameter: 8.3mm (0.33")

125,-

Hovedbilde Traxxas 5643 17T Pinion For 5mm Shaft

Traxxas 5643 17T Pinion For 5mm Shaft

This is a Traxxas 17 Tooth Pinion Gear for a 5mm Motor Shaft. FEATURES: Silver in color Metal construction INCLUDES: (1) 17 Tooth Pinion Gear (1) One 4mmx3.5mm set screw REQUIRES: Installation on motor shaft SPECS: Outer Diameter: 15.5mm (0.61") Inner Diameter: 5mm (0.20") Gear, 17-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw 17-tooth pinion gear (32-pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.

69,-

89,-

-22%

Hovedbilde Traxxas 1647 Silicon Grease

Traxxas 1647 Silicon Grease

This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application. Includes: 1- tube of grease (approximately 1 oz.)

29,-

Hovedbilde Helion 0206 Bumper Set F/R (Dominus TR)

Helion 0206 Bumper Set F/R (Dominus TR)

Bumper Set F/R (Dominus TR)

49,-

Hovedbilde Absima 2440013 Body Clips Medium Silver (10)

Absima 2440013 Body Clips Medium Silver (10)

Body Clips Medium Silver (10)

59,-

Hovedbilde Traxxas 6850X Heavy Duty Half Shafts Stampede 4X4

Traxxas 6850X Heavy Duty Half Shafts Stampede 4X4

This is the Heavy Duty Half Shaft Set for the Slash 4x4 from Traxxas FEATURES: Black plastic and steel construction INCLUDES: 2 external splined half shafts 2 internal splined half shafts 4 metal u-joints REQUIRES: Installation on vehicle

99,-

Hovedbilde Traxxas 4676 Spur Gear 48P 76T

Traxxas 4676 Spur Gear 48P 76T

This is a 48P, 76T Spur Gear for models with Traxxas Torque Control Slipper Clutch. FEATURES: 48 pitch 76 tooth Designed for models with a slipper clutch. Black plastic construction INCLUDES: One spur gear SPECS: Pitch: 48 Tooth: 76

39,-

Hovedbilde Traxxas 2419 Pinion Gear 48P 19T w/Set Screw Steel

Traxxas 2419 Pinion Gear 48P 19T w/Set Screw Steel

This is a Traxxas 19T 48P Pinion Gear. FEATURES: Metal construction Grey in color INCLUDES: One 19T 48P Pinion Gear One Set Screw REQUIRES: Installation

39,-

Hovedbilde Flysky FS-GT2B 2.4GHZ Transmitter

Hovedbilde Flysky FS-GT2B 2.4GHZ Transmitter

Flysky FS-GT2B 2.4GHZ Transmitter

FLYSKY GT2B features 3 channel operation, interchangeable hand grips, adjustable steering dual-rate, servo reversing and a rechargeable li-ion battery which eliminates the need for buying expensive AA batteries. The li-ion battery also makes this transmitter much lighter, which gives the user a great feel during use. No more lugging around a heavy transmitter holding 8 x AA batteries! Features: • Reliable, interference free 2.4GHz AFHDS signal operation • 3CH operation • Rechargeable li-ion transmitter battery • Interchangeable rubber hand grips • Adjustable steering dual-rate • Servo reversing Transmitter Specs: Model: Car/Boat RF Power: 20dBm (100mW) max Modulation: GFSK System Type: AFHDS Sensitivity: 1024 Low Voltage Warning: Yes Charge Port: Yes (USB- charge cable included) Power: 3.7V 800mAh li-ion (included) Weight: 270g Receiver Specs: Model: Car/Boat RF Receiver Sensitivity: -105dBm Modulation: GFSK System Type: AFHDS Sensitivity: 1024 Failsafe: Yes Power Port: Yes (VCC) Power: 4.5~6.5 VDC Weight: 5g Antenna Length: 26mm Dimensions: 37.6 x 22.3 x 13mm Includes: FS-GT2B transmitter FS-GT2B 3CH receiver 3.7V li-ion rechargeable battery pack Optional second rubber hand grip Antenna tube USB charge cable Bind plug User manual

579,-

699,-

-17%

Hovedbilde Traxxas 7184 Wheelie Bar Assembled 1/16 E-Revo

Traxxas 7184 Wheelie Bar Assembled 1/16 E-Revo

This is the Wheelie Bar for the Traxxas 1/16 scale E-Revo. FEATURES: Nylon construction Black in color INCLUDES: One Wheelie Bar One 2,5x14mm Cap Head Screws Three 2,5x8mm Cap Head Screws Instruction Sheet REQUIRES: Installation at rear of chassis

199,-

Hovedbilde Traxxas 7148 GTR Shock Spring Black 1/16 VXL (2)

Traxxas 7148 GTR Shock Spring Black 1/16 VXL (2)

These are the optional Black Rate GTR Shock Springs for use on the Traxxas 1/16 E-Revo VXL 4WD RTR. FEATURES: Steel construction Red in color 2.22 rate, black INCLUDES: Two GTR Shock Springs REQUIRES: Installation on the vehicle SPECS: Length: 19.75mm (0.78") Outer Diameter: 13.75mm (0.54") Inner Diameter: 10.95mm (0.43") Wire Diameter: 1.4mm (0.06")

49,-

Hovedbilde Traxxas 3767 Shock Caps/Bottoms (2)

Traxxas 3767 Shock Caps/Bottoms (2)

These are Shock Caps and Bottoms for Traxxas kits. These seal the shock containing the shock oil. FEATURES: Nylon construction INCLUDES: Two nylon shock cap (tops) Two nylon shock cap (bottoms) REQUIRES: Other shock components SPECS: Diameter Tops Bottoms 16MM 13MM COMMENTS: These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

39,-

Hovedbilde Traxxas 4914R Front Body Mount Posts T-Maxx 3.3

Traxxas 4914R Front Body Mount Posts T-Maxx 3.3

This is the Front Body Mount Posts, Rear Body Mount and four Screw Pins for the Traxxas T-Maxx 3.3R. FEATURES: Constructed of plastic these posts and mount attach the body to the chassis INCLUDES: Two Front Body Mount Posts Rear Body Mount and four 2.5 x 17mm screw pins REQUIRES: Installing on chassis

75,-

Hovedbilde Traxxas 3762 Black Shocks XX-Long (2)

Traxxas 3762 Black Shocks XX-Long (2)

This is a Pair of the Traxxas Black Shocks XX Long. These shocks are used on the rear of many Traxxas electric and nitro vehicles. FEATURES: Replaces damaged or worn shocks. Molded black plastic bodies. Change the dampening rate (firmness) of each shock with different widths of pre-load spacers. INCLUDES: Two Traxxas Black Shocks XX Long with springs, pre-load spacers of four different widths, silicone oil, bodies and pistons. REQUIRES: Assembling, filling with oil and installing on vehicle. SPECS: Length: 4-1/32" (102mm) fully extended Length: 2-3/4" (69.85mm) fully compressed Diameter: 1/2" (13mm)

215,-

Hovedbilde Traxxas 5132R Suspension Arms Lower Maxx

Traxxas 5132R Suspension Arms Lower Maxx

Denne passer for Begge E-Maxx`ene og T-Maxx 3.3. These are the Lower Suspension Arms for the T-Maxx 3.3. FEATURES: Helps to support axle carriers and shocks Black in color, constructed of hardened plastic INCLUDES: One Right and one Left Lower Suspension Arm for the T-Maxx 3.3 REQUIRES: Fastening to chassis COMMENTS: For the 3.3 version only. For the original T-Maxx Lower Suspension Arms, order TRX 5132. (vi har ikke den)

89,-

Hovedbilde Traxxas 3063X Wire Harness Series Battery Connection

Traxxas 3063X Wire Harness Series Battery Connection

This is the Series Battery Connection Wire Harness for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Traxxas IDConnectors Combines voltage of connected batteries for increased speed INCLUDES: One Wire Harness with instruction sheet REQUIRES: Installation between batteries and ESC

109,-

Hovedbilde Traxxas 2925X 1200mAh Power Cell NiMH Battery

Traxxas 2925X 1200mAh Power Cell NiMH Battery

NB!! Denne her erstatter TRX 2925 Traxxas Series 1 battery packs with iD auto battery identification are standard equipment in Traxxas 1/16-scale models. Like all Traxxas Power Cell packs, Series 1 batteries feature heavy-duty construction, flexible silicone-jacketed wires and Traxxas' high current connector for positive plug-in with zero-loss efficiency. 1200mAh capacity NiMH 6-cell 7.2-volt Series 1 Power Cell battery with iD auto battery identification, replacement battery for 1/16 Traxxas vehicles Genuine iD-equipped Power Cell NiMH battery packs make sure you experience all the performance that's been engineered into your Traxxas model Accessory Traxxas iD Auto Battery Identification chargers (sold separately) detect Traxxas iD Power Cell batteries and automatically set and optimize charge settings for unmatched charging safety and simplicity Type Battery Material NiMH Colour Black Width 7.5 cm Height 16 cm Depth 2 cm Weight 152 g

299,-

319,-

-6%

Hovedbilde Traxxas 7122 Wing w/Decal Sheet Black 1/16 E-Revo VXL

Hovedbilde Traxxas 7122 Wing w/Decal Sheet Black 1/16 E-Revo VXL

Traxxas 7122 Wing w/Decal Sheet Black 1/16 E-Revo VXL

This is the Wing for use on the Traxxas 1/16 E-Revo VXL 4WD RTR. FEATURES: Nylon construction, black in color INCLUDES: One Wing One Decal Set REQUIRES: Installation on the vehicle SPECS: Length: 118mm (4.6") Width: 43mm (1.7") Height: 29mm (1.1")

75,-

Hovedbilde Traxxas 7131 Suspension Arm Set Front VXL

Traxxas 7131 Suspension Arm Set Front VXL

This is the Front Suspension Arm Set for use on the Traxxas 1/16 E-Revo VXL 4WD RTR. FEATURES: Nylon construction Black in color INCLUDES: One Upper Right Suspension Arm One Lower Right Suspension Arm One Upper Left Suspension Arm One Upper Right Suspension Arm REQUIRES: Installation on the vehicle

109,-

119,-

-8%

Hovedbilde Traxxas 7132 Suspension Arm Set Rear VXL

Traxxas 7132 Suspension Arm Set Rear VXL

This is the Rear Suspension Arm Set for use on the Traxxas 1/16 E-Revo VXL 4WD RTR FEATURES: Nylon construction Black in color INCLUDES: One Lower Right Suspension Arm One Lower Left Suspension Arm Two Rear Lower Left/Right Suspension Arms

99,-

Hovedbilde Fly-Sky FS-GR3E 3 channel receiver for FS-GT2B Radio

Fly-Sky FS-GR3E 3 channel receiver for FS-GT2B Radio

FlySky FS-GR3E receiver The FS-GR3E 3-channel receiver operates in the AFHDS system at 2.4 GHz. The receiver is compatible with FlySky GT2, GT2B, GT3, GT3B, GT3C, T6, CT6B, GR3E and TH9X transmitters. The receiver is designed for RC trucks, buggies, and boats.

219,-

249,-

-12%

Hovedbilde Maxam 450199 adapter T-plugg han - Traxxas hun

Maxam 450199 adapter T-plugg han - Traxxas hun

Adapter, T-plug han - Traxxas hun

59,-

Hovedbilde RPM 80695 Suspension Arms Front Blue (2+2) 1/16 E-Revo ...

Hovedbilde RPM 80695 Suspension Arms Front Blue (2+2) 1/16 E-Revo ...

RPM 80695 Suspension Arms Front Blue (2+2) 1/16 E-Revo ...

Suspension Arms Front Blue (2+2) 1/16 E-Revo replaces TRX 7131 Quick Notes: – replaces stock Traxxas #7131 – matching Rear A-arms available – matching Axle Carriers available Upon the release of the Traxxas 1/16th Scale Mini E-Revo, we immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With our guaranteed unbreakable material and a proven A-arm design based off of our larger, 1/10th scale Revo A-arms, durability for these little monsters has arrived! A siginificant problem we have been able to eliminate was slop in the suspension system. In some cases, we found as much as 1/32” of slop in the stock A-arms! That has been remedied with these new RPM versions. Our A-arms eliminate nearly all of the A-arm slop, which allows camber, caster and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent steering and suspension system with a significantly reduced tendency for the truck to randomly wander while driving. Unique to RPM suspension arms is our angled leading and trailing edges. We incorporate a 30-degree bevel in these areas, which reduces the chance of breaking suspension parts since the A-arm will naturally try to transition over objects instead of bluntly plowing into them. RPM front A-arms for the Traxxas Mini E-Revo are sold in sets of four – both upper and both lower a-arms.

159,-