SamiRC
0,-
Lukk
Handlekurven er tom

Subtotal: 0,-

Multiplex 214231 ParkMaster 3D ARF

Art.nr: 214231
1.490,-

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

På lager: 1

  This is the radio controlled, electric powered,
                Multiplex ParkMaster 3D Park Flyer Airplane Kit.
                         For Intermediate Modelers.
          Fully 3D capable, can be flown outdoors in moderate wind.

FEATURES: Construction: Elapor foam white in color
          Wings: One-piece all foam
          Radio Compartment: Accessible under wing
          Aileron Control: Dual servo
          Landing Gear: Main, prebent fixed wire 0.008" (2mm) diameter,
          Wheels: Two foam 2" (51mm)
          Canopy: Elapor foam
          Decals: Peel and stick application with yellow, blue and green
            accents
          Building Time: Ready to fly in several hours

 

INCLUDES: Pre-molded wings, fuselage and tail assemblies, pushrods, all
            hardware, pre-bent 0.008" (2mm) wire landing gear, two 2" (51mm)
            main wheels, plastic motor mount, decal sheet and photo-illustrated
            instructions

 

REQUIRES: Motor: Multiplex makes a power set for this kit that includes a
            Himax 2816-0890 Motor, BL-17 Speed Control, APC 11 x 5.5" taper
            collet and prop driver
          Battery: Multiplex #15 7116 (not carried)
          Battery Charger: LiPo compatible
          Radio: 4 channel
          Servos: Four micro, 2-Aileron, 1-Elevator, 1-Rudder 
          Misc. Items: Building and field equipment

 

SPECS:    Wingspan: 37.8" (960mm)
          Wing Area: 565 sq in (36.5 sq dm)
          Weight: 18.5oz (525g)
          Wing Loading: 5.9 oz/sq ft) (18 g/sq dm)
          Length: 39.4" (1000mm)
          Airfoil: Fully symmetrical, mid-wing placement
          Center of Gravity: 4.3 - 4.7" (110 - 120mm) Back from the wing's
            leading edge at the fuselage
          Control Throws-
            Ailerons: 2.5" (65mm)
            Elevator: 2.5" (65mm)
            Rudder:   3.5" (90mm)

 

COMMENTS: This model is NOT made of styrofoam and it is not possible to glue
            the material using white or epoxy glue. Medium CA glue used with
            an activator is the only method of gluing recommended by the
            manufacturer.

Trykk ENTER for å søke