Hopp til innhold
Hjem / Verktøy/Lakk/Lim / Verktøy alle produsenter / M-DRIVE VERKTØY / M-DRIVE Hex/Nut Driver Tool - 5.5mm

M-DRIVE Hex/Nut Driver Tool - 5.5mm

Art.nr: MD30055

75,-

Minicars
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

M-DRIVE Hex/Nut Driver Tool - 5.5mm

High quality nutdriver wrench tool with black anodized aluminium handles and tough drivers made of HSS steel.
Specs:

  • Handle: Black anodized aluminium
  • Laser Engraving: M-DRIVE logo & size/type
  • Handle Diameter: 18.7mm
  • Handle Length: 100mm
  • Total Length: 180mm
  • Nut Driver Size: 5.5mm
  • Tip/Bits Material: High quality HSS

Suitable for:

  • Nut Driver 5.5mm: For M3 nuts

Produsent

Minicars

Relaterte produkter

 

Hovedbilde M-DRIVE Hex/Nut Driver Tool Set - 4, 5.5, 7 & 8mm Hovedbilde M-DRIVE Hex/Nut Driver Tool Set - 4, 5.5, 7 & 8mm
M-DRIVE Hex/Nut Driver Tool Set - 4, 5.5, 7 & 8mm
Art.nr: MD30000
Copied
M-DRIVE Hex/Nut Driver Tool Set - 4, 5.5, 7 & 8mm High quality nutdriver wrench tool set with black anodized aluminium handles and tough drivers made of HSS steel. The wrenches are also available separately. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Material: High quality HSS Suitable for: Nut Driver 4.0mm: For M2 nuts Nut Driver 5.5mm: For M3 nuts Nut Driver 7.0mm: For M4 nuts Nut Driver 8.0mm: For M5 nuts (and std glow plugs)

249,-

KJØP
Hovedbilde M-Drive 00001 P1 Electric Screwdriver Li-ion 3.6V ... Hovedbilde M-Drive 00001 P1 Electric Screwdriver Li-ion 3.6V ...
M-Drive 00001 P1 Electric Screwdriver Li-ion 3.6V ...
Art.nr: MD00001
Copied
M-DRIVE - P1 3.6V 1.3Ah Cordless Hobby Screwdriver This electric powered cordless screwdriver tool is made for wrenching on your radio controlled vehicle or other hobby/model projects. The power tool is equipped with a 3.6V Li-ion battery with a capacity of 1.3Ah that will give you hours of wrenching time. There are four optional sets with Ti-coated bits that are sold separately. Features: Left/right rotation Twistable handle Built in LED light USB charging (max 5V): charger not included - use your own smartphone USB charger or a USB port on your PC. Magnetic 6.35mm (1/4") bits holder Made for RC hobby use CE tested and CE approved (including Declaration of Conformity) Printed manual: Swedish, English, German, French & Finnish Specs: Charge lead: USB (Type-A) to Micro-USB (Micro-B) Bits holder: Magnetic 6.35mm (1/4") hex (bits are sold separately) Battery: Li-ion (18650) 3.6V, 1.3Ah, 4.68Wh Motor: Geared RS-380S Torque: 3.5Nm RPM: 180 Weight: 300g

399,-

KJØP
Hovedbilde M-DRIVE Hex/Nut Driver Tool - 4mm Hovedbilde M-DRIVE Hex/Nut Driver Tool - 4mm
M-DRIVE Hex/Nut Driver Tool - 4mm
Art.nr: MD30040
Copied
M-DRIVE Hex/Nut Driver Tool - 4mm High quality nutdriver wrench tool with black anodized aluminium handles and tough drivers made of HSS steel. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Nut Driver Size: 4mm Tip/Bits Material: High quality HSS Suitable for: Nut Driver 4.0mm: For M2 nuts

79,-

KJØP
Hovedbilde M-DRIVE 30070 Hex/Nut Driver Tool - 7mm Hovedbilde M-DRIVE 30070 Hex/Nut Driver Tool - 7mm
M-DRIVE 30070 Hex/Nut Driver Tool - 7mm
Art.nr: MD30070
Copied
M-DRIVE Hex/Nut Driver Tool - 7mm High quality nutdriver wrench tool with black anodized aluminium handles and tough drivers made of HSS steel. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Nut Driver Size: 7mm Tip/Bits Material: High quality HSS Suitable for: Nut Driver 7mm: For M4 nuts

79,-

89,-

KJØP
-11%
Hovedbilde M-DRIVE Hex/Nut Driver Tool - 8mm Hovedbilde M-DRIVE Hex/Nut Driver Tool - 8mm
M-DRIVE Hex/Nut Driver Tool - 8mm
Art.nr: MD30080
Copied
M-DRIVE Hex/Nut Driver Tool - 8mm High quality nutdriver wrench tool with black anodized aluminium handles and tough drivers made of HSS steel. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Nut Driver Size: 8mm Tip/Bits Material: High quality HSS Suitable for: Nut Driver 8mm: For M5 nuts (and glow plugs)

79,-

KJØP
Hovedbilde M-DRIVE Screwdriver Wrench Tool Combo Set - Flat Head ...
M-DRIVE Screwdriver Wrench Tool Combo Set - Flat Head ...
Art.nr: MD40000
Copied
M-DRIVE Screwdriver Wrench Tool Combo Set - Flat Head 3 & 4mm + Cross/Philips 3 & 4mm High quality screwdriver wrench tool set with black anodized aluminium handles and tough HSS steel in the tips. They fit most flat-head and cross/philips headed screws used in RC cars and other radiocontrolled models. Specs: Flat Head Screwdrivers: 3 & 4mm Cross/Philips Screwdrivers: 3 & 4mm Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Material: High quality HSS

199,-

KJØP
Hovedbilde M-DRIVE Mini-Wrench Tool Combo Set - 7-Pieces Hovedbilde M-DRIVE Mini-Wrench Tool Combo Set - 7-Pieces
M-DRIVE Mini-Wrench Tool Combo Set - 7-Pieces
Art.nr: MD45000
Copied
M-DRIVE Mini-Wrench Tool Combo Set - 7-Pieces High quality 7-piece mini wrench tool set with black anodized aluminium handles and tough HSS steel in the tips. These wrenches have a smaller size and are suitable for wrenching on smaller items. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 14.2mm Handle Length: 60mm Total Length: 110mm Tip/Bits Material: High quality HSS Included: Straight Hex/Allen Drivers: 1.5, 2 & 2.5mm Nut Drivers: 4 & 5.5mm Flat Head Screwdriver: 3mm Cross/Philips Screwdriver: 3mm

249,-

KJØP
Hovedbilde Yeah Racing YT-0187 Aluminum Drive Hex Wrench Set ...
Yeah Racing YT-0187 Aluminum Drive Hex Wrench Set ...
Art.nr: YT-0187
Copied
Yeah Racing Aluminum Drive Hex Wrench Set (1.5/2.0/2.5/3.0mm Hard Steel Allen Wrench) Black/Gold Description: With an anti-slip design handle and tips with an improved material for the tips these sleek black tools with a gold trim will sure be the best tools for you to keep in your pitbox! This set comes with the most used four sizes, so you can buy this set not having to worry not having the right tool! Feature: For: Car Building Material: Aluminum Color: Black/Gold Include: Allen Drivers (4 pcs)

349,-

399,-

KJØP
-13%
Hovedbilde Traxxas 8711 Speed Bit Master Set Hex Driver ... Hovedbilde Traxxas 8711 Speed Bit Master Set Hex Driver ...
Traxxas 8711 Speed Bit Master Set Hex Driver ...
Art.nr: TRX 8711
Copied
Speed Bit Master Set Hex Driver (7-pieces) Traxxas 7-Piece Metric Hex Bit Master Set 7-Piece Metric Hex Bit Master Set (#8711) Features: Precision-ground, hardened steel metric hex drivers Rubber overmolded handle for superior grip and comfort Precise fit magnetic insert holds the speed bit in the handle Standard 1/4 inch hex shank for use with power drill drivers Heavy-duty pouch holds tools securely Custom embroidered Traxxas logo Clearly marked with laser etched sizes Includes: Straight hex drivers: 1.5 mm, 2 mm, 2.5 mm, 3 mm Ball end drivers: 2 mm, 2.5 mm, 3 mm Maximum Durability 7-Piece Metric Hex Bit Master SetTraxxas premium tool kits are manufactured from exceptionally high quality materials to provide years of pro-level service. The thoughtfully engineered grip features an overmolded rubber design for more power and excellent comfort. The precision-ground, hardened-steel hex tips fit just right, to prevent wear, rounding, and screw damage. Designed specifically for Traxxas models, these speed bit sets come in a tough, compact pouch making them ideal to take along for service in the field. The included rubber overmolded handle holds the bits securely with a powerful magnet for fast bit changes. Headed to the track? Don’t worry, the included heavy-duty tool pouch keeps everything secure for traveling. Pick up any of the Premium Metric Speed Bit Sets and get wrenching with the only tools guaranteed to be Traxxas Tough™.  

949,-

999,-

KJØP
-5%
Hovedbilde Traxxas 8712 Speed Bit Master Set Hex & Nut Driver ... Hovedbilde Traxxas 8712 Speed Bit Master Set Hex & Nut Driver ...
Traxxas 8712 Speed Bit Master Set Hex & Nut Driver ...
Art.nr: TRX 8712
Copied
Traxxas 7-Piece Metric Hex and Nut Driver Essentials Set Maximum Durability Traxxas premium tool kits are manufactured from exceptionally high quality materials to provide years of pro-level service. The thoughtfully engineered grip features an overmolded rubber design for more power and excellent comfort. The precision-ground, hardened-steel hex tips fit just right, to prevent wear, rounding, and screw damage. Designed specifically for Traxxas models, these speed bit sets come in a tough, compact pouch making them ideal to take along for service in the field. The included rubber overmolded handle holds the bits securely with a powerful magnet for fast bit changes. Headed to the track? Don’t worry, the included heavy-duty tool pouch keeps everything secure for traveling. Pick up any of the Premium Metric Speed Bit Sets and get wrenching with the only tools guaranteed to be Traxxas Tough™. 7-Piece Metric Hex and Nut Driver Essentials Set (#8712): Precision-ground, hardened steel metric hex drivers Machined, hardened steel nut drivers Rubber overmolded handle for superior grip and comfort Precise fit magnetic insert holds the speed bit in the handle Standard 1/4 inch hex shank for use with power drill drivers Heavy-duty pouch holds tools securely Custom embroidered Traxxas logo Clearly marked with laser etched sizes Includes: Straight hex drivers: 1.5 mm, 2 mm, 2.5 mm Nut drivers: 5.0 mm, 5.5 mm, 7.0 mm, 8.0 mm

949,-

1.049,-

KJØP
-10%
Hovedbilde M-DRIVE MD50200 - Wheel Nut Wrench Tool - 17mm Hovedbilde M-DRIVE MD50200 - Wheel Nut Wrench Tool - 17mm
M-DRIVE MD50200 - Wheel Nut Wrench Tool - 17mm
Art.nr: MD50200
Copied
M-DRIVE Wheel Nut Wrench Tool - 17mm High quality 17mm wheel nut wrench tool made of red/black anodized aluminium. The perfect tool for removing and tightening your 1/8 Buggy, 1/8 Truggy or 1/8 GT wheel nuts. It also fits Traxxas E-Revo, Summit, T-Maxx 3.3, Revo 3.3 & other brands of bigger monster trucks with 17mm wheel nuts. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Size: 9x29x110mm Nut Wrench Socket: 17mm hex Nut Wrench Socket Size: D23 x L53mm  Suitable for: 17mm Wheel Nuts

149,-

KJØP
Hovedbilde M-DRIVE - Tool Holder Set - 195x90x110mm
M-DRIVE - Tool Holder Set - 195x90x110mm
Art.nr: MD90000
Copied
M-DRIVE - Tool Holder Set - 195x90x110mm A practical and simple black anodized aluminium tool holder set that holds an assortment of wrenches and tools. The 4mm thick base plate has an included sink for holding a few screws and nuts. Specs: Height: 110mm Length: 195mm Width: 90mm Weight: 283g

219,-

239,-

KJØP
-8%

Kunder kjøpte også

Hovedbilde Xray 302650 Ball End 4.9mm with thread 6mm
Xray 302650 Ball End 4.9mm with thread 6mm
Threaded 4.9mm ball end, for connection to molded ball joints. Set of six.

259,-

KJØP
Hovedbilde Excel 44290 - Knife set Pro. wooden case Hovedbilde Excel 44290 - Knife set Pro. wooden case
Excel 44290 - Knife set Pro. wooden case
Knife set Pro. wooden case DETAILS Excel Blades – Professional Set 44390 Includes (1) Excel Blades K1 Aluminum Knife with 4 jaw aluminum chuck for secure blade positioning and twist lock shatter resistant safety cap Includes (1) Excel Blades K2 Medium Duty Aluminum Knife with special fitted screw for blade security and stabilization Includes (1) Excel Blades K7 Carving Knife with roll resistant handle and ergonomic handle Includes Excel Blades (1) of each blade -  # 2/ 10/ 11/ 17/ 18/ 19 / 24/ 20104 Includes Excel Blades (1) of each gouge - 20310/ 20350 Encased in a simple wooden case (with a clasp lock) for storage and protection.  Used for: wood carving, scrap booking, paper cutting, cake decorating, model making, sculpting, polymer clay and trimming leather, cardboard, foam board, linoleum and more.  Used by: hobbyists, artists, designer, scrapbook artists and crafters.  Made in the USA    Contains: K1 Knife K2 Knife K7 Knive 11x assorted blades 2x gouges

469,-

KJØP
Hovedbilde Tamiya 74076 Cutting Mat A3 Size
Tamiya 74076 Cutting Mat A3 Size
This is the Tamiya Cutting Mat A3 Size.     FEATURES Three layer design features a harder outer layer on the top & bottom  of the mat with a softer center layer  Perfect for cutting parts off of trees, cutting decals or any cutting  with a hobby kife that would damage your table  Metric rulers printed on the face make it easy to measure parts you  are cutting   INCLUDES One Cutting Mat   REQUIREMENTS Nothing is required   SPECIFICATIONS  Length: 17.75" (450mm)  Width: 12.75" (322mm)  Thickness: .80" (2mm)

259,-

279,-

KJØP
-7%
Hovedbilde Traxxas 1834 Body Clips (12)
Traxxas 1834 Body Clips (12)
Disse passer Traxxas 1/16 biler.   These are Replacement Traxxas Body Clips.          They can be used on Traxxas or most other brands of cars. FEATURES: Metal clips are silver in color INCLUDES: Twelve body clips SPECS:    Length: aprrox. 7/8"  

25,-

35,-

KJØP
-29%
Hovedbilde M-DRIVE Hex/Allen Wrench Spare Tip - 3mm Straight Hex Hovedbilde M-DRIVE Hex/Allen Wrench Spare Tip - 3mm Straight Hex
M-DRIVE Hex/Allen Wrench Spare Tip - 3mm Straight Hex
M-DRIVE Hex/Allen Wrench Spare Tip - 3mm Straight Hex High quality hex/allen wrench spare HSS steel tip. Specs: Length: 100mm Tip/Bits Hex Size: 3mm Tip/Bits Diameter: 3mm Tip/Bits Material: High quality HSS Suitable for: M4 hex screws with allen head M5 hex screws with countersunk head M5 hex screws with button head

39,-

KJØP
Hovedbilde M-DRIVE Hex/Allen Wrench Spare Tip - 2.5mm Straight ... Hovedbilde M-DRIVE Hex/Allen Wrench Spare Tip - 2.5mm Straight ...
M-DRIVE Hex/Allen Wrench Spare Tip - 2.5mm Straight ...
M-DRIVE Hex/Allen Wrench Spare Tip - 2.5mm Straight Hex High quality hex/allen wrench spare HSS steel tip. Specs: Length: 100mm Tip/Bits Hex Size: 2.5mm Tip/Bits Diameter: 3mm Tip/Bits Material: High quality HSS Suitable for: M3 hex screws with allen head (cylindrical) M4 hex screws with countersunk head M4 hex screws with button head

39,-

KJØP
Hovedbilde M-DRIVE Hex/Allen Wrench Spare Tip - 2mm Straight Hex Hovedbilde M-DRIVE Hex/Allen Wrench Spare Tip - 2mm Straight Hex
M-DRIVE Hex/Allen Wrench Spare Tip - 2mm Straight Hex
M-DRIVE Hex/Allen Wrench Spare Tip - 2mm Straight Hex High quality hex/allen wrench spare HSS steel tip. Specs: Length: 100mm Tip/Bits Hex Size: 2mm Tip/Bits Diameter: 3mm Tip/Bits Material: High quality HSS Suitable for: M3 hex screws with countersunk head M3 hex screws with button head

39,-

KJØP
Hovedbilde M-DRIVE Hex/Allen Wrench Spare Tip - 1.5mm Straight ... Hovedbilde M-DRIVE Hex/Allen Wrench Spare Tip - 1.5mm Straight ...
M-DRIVE Hex/Allen Wrench Spare Tip - 1.5mm Straight ...
M-DRIVE Hex/Allen Wrench Spare Tip - 1.5mm Straight Hex High quality hex/allen wrench spare HSS steel tip. Specs: Length: 100mm Tip/Bits Hex Size: 1.5mm Tip/Bits Diameter: 3mm Tip/Bits Material: High quality HSS Suitable for: M3 electric motor pinions (most 1/10 cars)

39,-

KJØP
Hovedbilde M-DRIVE Power Tool Ti-Coated Bits Combo Set - Straight ... Hovedbilde M-DRIVE Power Tool Ti-Coated Bits Combo Set - Straight ...
M-DRIVE Power Tool Ti-Coated Bits Combo Set - Straight ...
M-DRIVE Power Tool Ti-Coated Bits Combo Set - Straight Hex 2 & 2.5mm + Nut Drivers 5.5 & 7mm These Ti-coated power tool bits have a 6.35mm hex (1/4”) that fits our P1 cordless hobby screwdriver. Specs: Material: HSS (Ti-Coated) Straight Hex: 2 & 2.5mm Nut drivers: 5.5 & 7mm Length: 100mm Hex Dimension: 6.35mm (1/4") Suitable for: Straight Hex 2.0mm: M3 hex screws with countersunk- or button-head Straight Hex 2.5mm: M3 hex screws with allen head (cylindrical) and M4 hex screws with countersunk head or button-head Nut Driver 5.5mm: M3 nuts Nut Driver 7.0mm: M4 nuts

239,-

259,-

KJØP
-8%
Hovedbilde M-drive 21025 Pro TiN Allen Wrench Straight Hex Tool ...
M-drive 21025 Pro TiN Allen Wrench Straight Hex Tool ...
M-DRIVE PRO TiN Hex/Allen Wrench Tool - 2.5mm Straight Hex High quality PRO series hex/allen wrench tool with black anodized aluminium handle and tough hardened steel tip with a TiN coating.    Specs: Handle: Black & Gold anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Diameter: 3mm Tip/Bits Material: Hardened steel with TiN coating Suitable for: Straight Hex 2.5mm: For M3 hex screws with allen head (cylindrical) and M4 hex screws with countersunk head or button-head

89,-

KJØP
Hovedbilde M-drive MD21015 Pro TiN Allen Wrench Straight Hex Tool ...
M-drive MD21015 Pro TiN Allen Wrench Straight Hex Tool ...
M-DRIVE PRO TiN Hex/Allen Wrench Tool - 1.5mm Straight Hex High quality PRO series hex/allen wrench tool with black anodized aluminium handles and tough hardened steel tip with a TiN coating.   Specs: Handle: Black & Gold anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Diameter: 3mm Tip/Bits Material: Hardened steel with TiN coating Suitable for: Straight Hex 1.5mm: For M3 electric motor pinion grub screws (most 1/10 - some larger pinions use a M4 screw that needs an straight 2mm)

89,-

99,-

KJØP
-10%
Hovedbilde M-DRIVE 21030 Pro TiN Allen Wrench Straight Hex Tool ...
M-DRIVE 21030 Pro TiN Allen Wrench Straight Hex Tool ...
M-DRIVE 21030 Pro TiN Allen Wrench Straight Hex Tool 3.0mm

89,-

KJØP
Hovedbilde M-DRIVE 90500 Tool Pouch/Bag with Zipper Hovedbilde M-DRIVE 90500 Tool Pouch/Bag with Zipper
M-DRIVE 90500 Tool Pouch/Bag with Zipper
M-DRIVE Tool Pouch/Bag with Zipper This is a professional canvas tool pouch that is the perfect on-the-go storage for your M-Drive tools. Specs: Black canvas with yellow contrast Printed M-Drive logo Zipper Length: 260mm Width: 240mm Height: 35mm Tools not Inculded as shown below  

149,-

KJØP
Hovedbilde M-DRIVE - Screws & Nuts Tray Magnetic - 11x88x106mm - ...
M-DRIVE - Screws & Nuts Tray Magnetic - 11x88x106mm - ...
M-DRIVE - Screws & Nuts Tray Magnetic - 11x88x106mm - Gold A practical and simple gold anodized aluminium tray with an magnetic pad that keeps your screws and nuts in place while dissassembly your rc vehicle. Also available with black anodizing. Specs: Height: 11mm Length: 106mm Width: 88mm Weight: 37g

59,-

KJØP
Hovedbilde M-DRIVE Hex/Allen Wrench Tool - 2mm Straight Hex Hovedbilde M-DRIVE Hex/Allen Wrench Tool - 2mm Straight Hex
M-DRIVE Hex/Allen Wrench Tool - 2mm Straight Hex
M-DRIVE Hex/Allen Wrench Tool - 2mm Straight Hex High quality hex/allen wrench tool with black anodized aluminium handle and tough HSS steel tip. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Hex Size: 2mm Tip/Bits Diameter: 3mm Tip/Bits Material: High quality HSS Suitable for: M3 hex screws with countersunk head or button head

79,-

89,-

KJØP
-11%
Hovedbilde WLToys 144001.1251.001 Wheel Frame (Front)
WLToys 144001.1251.001 Wheel Frame (Front)
Wheel Frame (Front)   Produktet er forbundet med: Reservedeler WLToys Biler WLToys Buggy 124017 Fierce 1/12 4WD Børsteløs V2 WLtoys Buggy 124019 Fierce 1/12 4WD - Komplett WLToys Truck 124016 1/12 4WD Børsteløs V2 WLtoys Truck Offroad Habile 1/12 4WD - Komplett

39,-

45,-

KJØP
-13%
Hovedbilde M-DRIVE 23000 Pro TiN Allen Wrench Ball Hex Tool Set ... Hovedbilde M-DRIVE 23000 Pro TiN Allen Wrench Ball Hex Tool Set ...
M-DRIVE 23000 Pro TiN Allen Wrench Ball Hex Tool Set ...
M-DRIVE PRO TiN Hex/Allen Wrench Tool Set - 2, 2.5 & 3mm - Ball Hex High quality PRO series ball tipped hex/allen wrench tool set with black & gold anodized aluminium handles and tough Tin coated hardened steel tips. The wrenches are also available separately plus also spare tips/bits.   Specs: Handle: Black and Gold anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Diameter: 3mm Tip/Bits Material: TiN coated hardened steel

259,-

279,-

KJØP
-7%
Hovedbilde M-DRIVE 30070 Hex/Nut Driver Tool - 7mm Hovedbilde M-DRIVE 30070 Hex/Nut Driver Tool - 7mm
M-DRIVE 30070 Hex/Nut Driver Tool - 7mm
M-DRIVE Hex/Nut Driver Tool - 7mm High quality nutdriver wrench tool with black anodized aluminium handles and tough drivers made of HSS steel. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Nut Driver Size: 7mm Tip/Bits Material: High quality HSS Suitable for: Nut Driver 7mm: For M4 nuts

79,-

89,-

KJØP
-11%
Hovedbilde Traxxas 2516 Screws M3x45mm Button Head (6)
Traxxas 2516 Screws M3x45mm Button Head (6)
Screws, 3x45mm button-head machine (hex drive) (6)

39,-

KJØP
Hovedbilde Hudy Nut driver 5.5mm
Hudy Nut driver 5.5mm
  Nut driver 5.5mm

269,-

289,-

KJØP
-7%
Hovedbilde Team C Racing 5.5mm Nut Driver
Team C Racing 5.5mm Nut Driver
Description: This is Team C Racing Nut Driver for 5.5mm nut   Feature: •Material: Aluminum, Spring steel for the shaft •Color: GunMetal Specification: •Length: 155mm •Width: 20mm •Hex Size: 5.5mm •Weight: 70g Include: •Team C Racing 5.5mm Nut Driver (1pc)

199,-

KJØP
Hovedbilde Tamiya 56514 1/14 R/C Tractor Truck Scania R620 6x4 ... Hovedbilde Tamiya 56514 1/14 R/C Tractor Truck Scania R620 6x4 ...
Tamiya 56514 1/14 R/C Tractor Truck Scania R620 6x4 ...
   NB! NB! Disse er ulakkerte, altså hvite.   Description For Tamiya 3-axle tractor trucks with wheelbase of 237mm+103mm Images shown on truck with paint Chassis parts are not included in set Specs: Length: 520mm Width: 187mm Height: 293mm Wheelbase: 237+103mm Compatible models: Item: 56323 Scania R620 6x4 HIGHLINE Item: 56325 MAN TGX 26.540 6x4 XLX Also Usable with 3-axle Tractor Trucks with wheelbases of 237mm+103mm.   Link til TamiyaUSA  

1.695,-

1.795,-

KJØP
-6%
Hovedbilde M-DRIVE Hex/Nut Driver Tool - 4mm Hovedbilde M-DRIVE Hex/Nut Driver Tool - 4mm
M-DRIVE Hex/Nut Driver Tool - 4mm
M-DRIVE Hex/Nut Driver Tool - 4mm High quality nutdriver wrench tool with black anodized aluminium handles and tough drivers made of HSS steel. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Nut Driver Size: 4mm Tip/Bits Material: High quality HSS Suitable for: Nut Driver 4.0mm: For M2 nuts

79,-

KJØP
Hovedbilde M-DRIVE Hex/Allen Wrench Tool Set - 1.5, 2, 2.5 & 3mm ... Hovedbilde M-DRIVE Hex/Allen Wrench Tool Set - 1.5, 2, 2.5 & 3mm ...
M-DRIVE Hex/Allen Wrench Tool Set - 1.5, 2, 2.5 & 3mm ...
M-DRIVE Hex/Allen Wrench Tool Set - 1.5, 2, 2.5 & 3mm Straight Hex High quality hex/allen wrench tool set with black anodized aluminium handles and tough HSS steel in the tips. The wrenches are also available separately plus also spare tips/bits. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Diameter: 3mm Tip/Bits Material: High quality HSS Suitable for: Straight Hex 1.5mm: For M3 electric motor pinion grub screws (most 1/10 - some larger pinions use a M4 screw that needs an straight 2mm) Straight Hex 2.0mm: For M3 hex screws with countersunk head or button-head Straight Hex 2.5mm: For M3 hex screws with allen head (cylindrical) and M4 hex screws with countersunk head or button-head Straight Hex 3.0mm: For M4 hex screws with allen head or M5 with countersunk head & M5 with a button head

219,-

239,-

KJØP
-8%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png