Kyosho MDW201 FRONT SUSPENSION SPRING SET Mini-Z MA020

FRONT ONEWAY UNIT MINI-Z AWD

På lager 1

Multi Offset Wheel Set(White/AWD/14pcs.) MDH100W Popular easy to paint white color N0/+1.5/+2.5/+3.5、W0/W+1, two each included (N0 has 4 included) total 14 in set.

På lager 1

KRONOS Mini-Z Racing Foam Tyres 35 Shore (4) 8.5mm

På lager 7

KRONOS Mini-Z Racing Foam Tyres 35 Shore (4) 11.0mm

På lager 5

Yeah Racing YA-0565BK 2mm Aluminium Lock Nut Black 10pcs Description: Aluminum lightweight locknuts with nylon locking to prevent the screw from coming loose due to vibrations in your rig.   Feature:   For: RC Material: Aluminum Color: Black   Include:   Locknut (10 pcs)

På lager 5

1 meter rød silikonkabel 1 meter svart silikonkabel Bronto silikonledning av høy kvalitet. Leveres i pakning med 1 meter rød og 1 meter svart.   Spesifikasjoner   AWG 14 Diameter 1.63mm Areal 2.08mm2 PS! Vær oppmerksom på at vi har samme produktbilde på alle ledningstykkelser, og at produktutseendet derfor vil avvike noe fra bildet.

** Ikke på lager

Bronto JST female - 10cm 22AWG silikonkabel JST-kontakt med ferdig påmontert 10cm 22AWG silikonkabel.

På lager 2

Bronto Ladekabel - 4mm til T-Plug (Deans)   Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 14AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med Deans plugg til 4mm bananplugger. Benyttes for lading av batterier med Deans-plugg, og kobles rett i ladere med 4mm tilkobling.   Spesifikasjoner Ledning 14AWG Lengde 30cm Tilkobling 1 4mm Banan Tilkobling 2    T-plug (Deans) male

** Ikke på lager

Dynomax Banana Plug 4mm gold plated Pair

På lager 3

Kyosho MZW403 Carbon Rear Suspension Plate set Mini-Z MR03 MM-LM (3)

På lager 4

Yeah Racing RC PTFE Bearing Set with Bearing Oil For Kyosho Mini-Z & F-1 Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision *Now comes with bearing oil for maintaining bearings in long run. (This new bearing set (with bearing oil) will replace the old item.) Specification: Telfon Bearing For Kyosho Mini-Z & F-1 #YB0001BX Material: Metal Include: Bearing (7Pcs) Bearing Oil (15ml) #YA-0215 * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation:    High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)  

På lager 2

SkyRC NC1500 NiMH AA/AAA Battery Charger & Analyzer Charging batteries is usually a primitive, boring and mundane activity, and it still is. What matters during the charging process, especially for AA/AAA NiMH battery charging? No doubt, accuracy and safety! The creation of NC1500 not only arises out of the need but also from the desire to have a simple but safe and accurate charger for the battery. NC1500 has four independent slots and supports AA/AAA NiMH batteries, offers a maximum charge rate of 1500mA. Four Independent Slot 1-4 pcs of NiMH AA, or AAA can be charged at the same time in any combinations. 3 Working Modes Charge Mode: Charging current adjustable 200mA / 500mA / 700mA / 1000mA / 1500mA. Useful when battery needs to be recharged without determining the capacity of the battery. It should be used on batteries known to be in good condition and have been in continuous use. Discharge Mode: Discharging current adjustable 100mA / 250mA / 350mA / 500mA / 650mA Useful for analyzing the amount of charge stored in the battery. Battery not recharged at the end of the cycle. Refresh Mode: First recharges the battery, rest for one hours, discharges, rest, then recharges again. Charging and discharging rates are programmable. Reports the discharge capacity at the end of the cycle. Useful when the battery capacity needs to be determined. Also useful for battery with degraded performance. Battery Internal Resistance Detection *At the start of a program, the device always performs a quick standard test first in order to determine the internal battery resistance. Aged or poor condition batteries have a higher IR and therefore heat up more during charge or discharge. The values are estimates and will vary depending on the state of the batteries and operation environment. Convenient Operation Powered by smartphone charger, any standard USB adaptor, power banks, and car chargers (5V/2A USB). Specifications: USB Input Power: 5V/2.1A Trickle Current: 50mA Operation Mode: CHARGE, DISCHARGE and REFRESH Operating Temperature: 0 ~ 45 ℃ Charge Current: 200mA / 500mA / 700mA / 1000mA / 1500mA Discharge Current: 100mA / 250mA / 350mA / 500mA / 650mA Max Charging Capacity: 3000mAh Weight: 106g Size: 108x73x28mm

På lager 1