Hopp til innhold
Hjem / Radio/Servo/Motor / Servo / Servo Tilbehør / Hitec 44460 HPP-21 Plus Digital Servo Programmer

Hitec 44460 HPP-21 Plus Digital Servo Programmer

Art.nr: 44460

749,-

Hitec

Hitec
På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

 This is the HPP-21+ PC and Field Programmer for Hitec Digital Servos.

FEATURES: Programs Hitec programmable digital servos directly from a PC or in
            the field
          Programmable parameters include;
            Servo Manual and Auto Test
            Dead Band Width         Speed (reduce)
            Direction (CW/CCW)      Fail Safe Position
            Fail Safe On/Off        End Points
          Tests and cycles all manufacturers' servos
          Free downloadble software
          USB PC connection

INCLUDES: Hitec HPP-21+ PC and Field Programmer with instruction sheet

REQUIRES: 4.8V battery to power servo
          USB Cord
          Downloading the software at: www.hitecrcd.com

SPECS:    Length: 48mm (1.9")
          Width: 30mm (1.2")
          Height: 20mm (0.8")

COMMENTS: The following parameters are also programmable in the Hitec HS-79XX
            G2 digital servos; Overload Protection and High Resolution
            (on/off).

Produsent

Hitec

Hitec

Kunder kjøpte også

Hovedbilde Tamiya 19005422 G Parts Bag for 58132
Tamiya 19005422 G Parts Bag for 58132
G Parts Bag for 58132 Might fit other CC-01 models as well, please refer to your manual.

119,-

KJØP
Hovedbilde Hitec 33785S HS-785HB 3.5 Turn Sail Winch
Hitec 33785S HS-785HB 3.5 Turn Sail Winch
This is the Hitec HS-785HB Sail Winch Servo with Hitec connectors  for use in sail boat applications.     FEATURES Karbonite gears  Ball bearing  Water and dust tight   INCLUDES One HS-785HB sail winch servo with Hitec connector  One winch servo drum  Mounting hardware   REQUIREMENTS Nothing   SPECIFICATIONS  Length: 2.32" (59mm)  Width: 1.14" (29mm)  Height: 1.96" (50mm)  Weight: 3.88oz (110g)  Speed: 1.68 sec/60° @ 4.8V 1.38 sec/60° @ 6V  Torque: 152.75 oz-in (11 kg-cm) @ 4.8V and 183.31 oz-in (13.2 kg-cm) @ 6V  Current (at idle): 8mA (6.0V)  Current (running): .230mA (6.0V and load)   COMMENTS This servo is larger than standard size servo. Its size is equal  to that of 1/4 scale servo.

649,-

729,-

KJØP
-11%
Hovedbilde Tamiya 19115153 N Parts Bag (N) (DT-02)
Tamiya 19115153 N Parts Bag (N) (DT-02)
N Parts Bag (N) (DT-02)

95,-

KJØP
Hovedbilde DynoMax B9589 Connector EC5 5mm pair
DynoMax B9589 Connector EC5 5mm pair
Low Resistance Gold Plating 2U-3U Heat Resistant Housing (-20–200°C) Max load: 100-150A Size (together) : L: 33.5 x W20 x H10 mm Weight: 12.7 g (pair) Bullet Connector Diameter: 5 mm Stripped Wire Max dia: 4.3 mm (10AWG) Package includes: 1 pair of EC5 connectors

55,-

KJØP
Hovedbilde Zap PT-02 Adhesives Zap-A-Gap CA+ 1 oz
Zap PT-02 Adhesives Zap-A-Gap CA+ 1 oz
   This is a 1oz Bottle of Zap-A-Gap CA+ Glue from Pacer.       Not safe for foam. For foam applications use epoxy or foam-safe CA. FEATURES: Superior gap filling formula.           Medium viscosity.           Allows approximately 7-10 seconds for part positioning.           Average of 20 seconds curing.           Works on oily surfaces also.           Use Zip Kicker to accelerate cure time. INCLUDES: One 1oz Bottle of Zap-A-Gap CA+ Glue. SPECS:    1oz (28.4g)

129,-

139,-

KJØP
-7%
Hovedbilde Zap PT-08 Adhesives Zap CA 1 oz
Zap PT-08 Adhesives Zap CA 1 oz
  This is a 1oz Bottle of Zap CA Glue from Pacer.       Not safe for foam. For foam applications use epoxy or foam-safe CA. FEATURES: Super thin water-like consistency.           Superior penetrating formula.           Works on most materials.           Bonds and cures in 1-5 seconds.           Best for "tacking" applications. INCLUDES: One 1oz Bottle of Zap CA Glue. SPECS:    1oz (28.4g)

129,-

KJØP
Hovedbilde Zap PT-39 Adhesives Z-Poxy 30-Minute 8 oz
Zap PT-39 Adhesives Z-Poxy 30-Minute 8 oz
Pacer's 30 Minute Z-Poxy is Resistant to Shock and Solvents, is Non-Brittle,  Easy to Sand and has Excellent Gap Filling Characteristics.   FEATURES Cures Completely Clear  Z-Poxy is specially formulated to bond to fiberglass, wood,  metals and plastics.  Produces a tough permanent bond in just 30 minutes.  Great for installing firewalls and bulkheads.   INCLUDES One 4oz Bottle Z-Poxy Resin  One 4oz Bottle Z-Poxy Hardener   COMMENTS The total working time of this glue is 20 to 30 minutes, and fully  cures in 30 minutes.  This product contains Epoxy resin and Polyamide resin, some people  are allergic to these compounds.

349,-

KJØP
Hovedbilde Tamiya 9400655 Metal Parts Bag H Screws Metal Parts ...
Tamiya 9400655 Metal Parts Bag H Screws Metal Parts ...
This is the Metal Parts Bag H for the Tamiya Toyota Hilux. FEATURES: Steel and aluminum hardware with rubber O-rings INCLUDES: Plate stays for gearbox, gear spacers, threaded rods, various screws            and locknuts, wire muffler stay, O-rings, two shift rods, panel stay            and mirror spring REQUIRES: Installing all parts following instructions in manual

439,-

KJØP
Hovedbilde Hitec HS-7950TH HV Digital Ultra Torque Coreless TG
Hitec HS-7950TH HV Digital Ultra Torque Coreless TG
Hitec Digital HS-7950TH for 7,4V. Digital servo fra Hitec hvor du kan bruke 2celler lipo direkte til servoen uten regulator. Meget sterk servo som leveres med titanium alloy metal gears, med 2 kulelager. Husk å sjekk at din mottaker takler 7,4V uregulert.   Speed: 0,15sec/60grader på 6V, 0,13sec på 7,4V Torque: 29kg-cm på 6V, 35kg-cm på 7,4V Weight: 68gram Size: 40x20x38mm This is the HS-7950TH High Speed, Ultra Torque Digital Servo from Hitec. FEATURES: Ideal for giant scale planes, monster trucks and rock crawlers           Coreless motor for precise centering and accuracy           G2 programmable digital circuit, programmable features include;             Dead Band Width            Speed (reduction)             Fail Safe Position         Direction (CW/CCW)             Fail Safe On/Off           End Points             Overload Protection        Resolution High/Low           Titanium gears that don't break or develop slop like conventional             metal gears           Capable of operating on two LiPo packs INCLUDES: HS-7950TH High Speed, Ultra Torque Digital Servo with 1" (25.5mm)             single arm horn, 1" (21.5mm) aluminum single arm horn, 0.85" (32mm)             heavy duty single arm horn, 2.8" (72mm) heavy duty double arm horn,             2.3" (59mm) double arm horn, 1.8" (45mm) round horn, four eyelets,             four rubber grommets, four 2x15mm mounting screws and instruction             sheet REQUIRES: Installing in model and connecting to control linkage and receiver SPECS:    Size: 1.57 x 0.79 x 1.50" (40 x 20 x 38mm)           Weight: 2.40oz (68g)                    6.0V                   7.4V           Speed:  0.15 sec             0.13 sec           Torque: 403 oz/in (29kg-cm)           486 oz/in (35kg-cm)           Drivetrain Type: Dual ball bearing COMMENTS: This servo can be programmed with any Hitec digital servo             programmer. However, the Overload Protection and Resolution High/             Low can only be programmed with the HFP-20, HPP-21             or the HPP-21+           A note on coreless motors-a conventional servo motor has a steel core             armature wrapped with wire that spins inside the magnets. In a             Coreless design, the armature uses a wire mesh that forms a cup             that spins around the outside of the magnet. This arrangement is             much lighter resulting in smoother operation and faster response             time.

1.759,-

1.995,-

KJØP
-12%
Hovedbilde Hitec HS-7985MG Digital High Torque Metal Gear ...
Hitec HS-7985MG Digital High Torque Metal Gear ...
This is a Hitec Digital, High Speed, High Resolution, Metal Gear                           Programmable Servo. FEATURES: Coreless motor           Ideal for high performance aircraft to 1/4 scale, .30 and larger             helicopters, and steering and throttle for 1/10 and 1/8 scale             vehicles           Gold plated contacts           Metal gears           Dual ball bearings           High speed           Water and dust resistant INCLUDES: Digital high speed servo with 12" wire and universal connector           2" servo arm           Heavy duty 1-1/2" servo arm           Heavy duty 2-3/4" servo arm           Black disc servo horn           Four 2 x 14mm mounting screws           Four brass eyelets           Four black rubber vibration isolators           Plastic case and programming instruction sheet           Hitec decals REQUIRES: Radio system SPECS:    Speed: 0.16 sec/60 degrees at 4.8V                  0.13 sec/60 degrees at 6.0V           Torque: 144.42 oz-in at 4.8V (10.4 kg-cm)                   172.20 oz-in at 6.0V (12.4kg-cm)           Length:  1.57" (40mm)           Width:   0.78" (20mm)           Height:  1.45" (37mm)           Weight: 2.18oz (62g) COMMENTS: A note on coreless motors-a conventional servo motor has a steel core             armature wrapped with wire that spins inside the magnets. In a             Coreless design, the armature uses a wire mesh that forms a cup             that spins around the outside of the magnet. This arrangement is             much lighter resulting in smoother operation and faster response             time.

869,-

1.069,-

KJØP
-19%
Hovedbilde Hitec HS-7945TH HV Multipurpose Titanium Coreless ...
Hitec HS-7945TH HV Multipurpose Titanium Coreless ...
This is the HS-7945TH High Volt, Mega Torque, Metal Gear Servo from Hitec. FEATURES: Ideal for high performance aircraft, cars, trucks and larger nitro             and electric helicopters where high speed and high torque are             needed           7.4V optimized coreless motor designed to be powered from a 2S LiPo             battery for extra speed and power (may also be powered by             conventional NiCds)           Durable titanium alloy metal gears with dual ball bearing output             shaft (MK first gear)           Programmable features include; Dead Band Width, Rotation Direction,             Rotation Speed, End Points/Neutral Points, Fail Safe On/Off, Fail             Safe Point, Resolution and Overload Protection (requires Hitec             programmer HFP20, HPP20 or HPP21)           Eight O-rings for water, dust and fuel resistance           Heatsink case INCLUDES: HS-7945TH High Volt Mega Torque Metal Gear Servo with Connector,             1.8" (45mm) round horn, 1.2" (27mm) single arm, 2.3" (59mm) double             arm, 2.8" (72mm) double arm, 1.3" (33mm) single arm, 0.87" (22mm)             aluminum single arm, mounting hardware and instruction sheet REQUIRES: Installing in model and connecting linkage SPECS:    Motor Type: Coreless (7.4V wind)           Bearing Type: Dual ball bearing           Speed: 6.0V, 0.12 sec/60°                  7.4V, 0.10 sec/60°           Torque: 6.0V, 250 oz-in (18.0 kg-cm)                   7.4V, 319 oz-in (23 kg-cm)           Size: 1.57 x 0.79 x 1.5" (39.88 x 20.07 x 38.10mm)           Weight: 2.40oz (68g) COMMENTS: A note on coreless motors-a conventional servo motor has a steel core             armature wrapped with wire that spins inside the magnets. In a             Coreless design, the armature uses a wire mesh that forms a cup             that spins around the outside of the magnet. This arrangement is             much lighter resulting in smoother operation and faster response             time.

1.595,-

1.795,-

KJØP
-11%
Hovedbilde Hitec HS-5625MG Digital High-Speed Metal Gear BB Servo
Hitec HS-5625MG Digital High-Speed Metal Gear BB Servo
    This is a Hitec Digital, Super Speed, Metal Gear, Programmable Servo   that will work with Futaba J, Hitec S, JR, and Airtronics-Z radio systems. FEATURES: EPA, Speed, Direction, and Fail-Safe Programmable (see COMMENTS).           MOSFET amplifier.           Gold plated contacts.           Three metal gears           Dual ball bearings.           Indirect drive long life potentiometer.           High standing torque.           Watertight and dustproof.           Includes blue aluminum, heat-treated servo arm (see COMMENTS).           Works with fixed winged aircraft and helicopters up to 40 pounds,             1/10th and 1/8th on- or off-road vehicles. INCLUDES: One digital high torque servo with 12" wire and S/JR/Air-Z connector           One white small X-shaped servo horn.           One red Large X-shaped servo horn.           One white adjustable servo horn.           One white off-set straight servo horn.           One white disc servo horn.           One blue aluminum, heat-treated servo arm horn.           Four 2 x 14mm mounting screws           Four brass eyelets           Four black rubber vibration isolators. REQUIRES: Hitec, JR and Airtronics-Z radio system SPECS:    Speed: 0.17 sec/60° at 4.8V           Speed: 0.14 sec/60° at 6.0V           Torque: 109.7 oz-in at 4.8V           Torque: 130.53 oz-in at 6.0V           Length:  1.59" (40.6mm)           Width:   0.77" (19.8mm)           Height:  1.48" (37.8mm)           Weight:  2.11oz (60g) COMMENTS: Programming the failsafe:             In order to program the Fail-Safe on this servo. Modeler will need             to purchase the Hitec field programmer sold separately.

629,-

719,-

KJØP
-13%
Hovedbilde Traxxas 5640 14T Pinion For 5mm Shaft
Traxxas 5640 14T Pinion For 5mm Shaft
This is a Traxxas 14 Tooth Pinion Gear for a 5mm Motor Shaft. FEATURES: Silver in color           Metal construction INCLUDES: (1) 14 Tooth Pinion Gear           (1) One 4mmx3.5mm set screw REQUIRES: Installation on motor shaft SPECS:    Outer Diameter: 15.5mm (0.61")           Inner Diameter: 5mm (0.20")

59,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png