Charge Lead Tamiya with 4mm banana plugs

This is the Traxxas Super Duty Long Glowplug. FEATURES: Ideal for all Traxxas engines including the 2.5, 2.5R and 3.3 engines           Suited for the varied throttle range of off-road racing           Medium heat range INCLUDES: One Traxxas Medium Heat Range Super Duty Long Glowplug with gasket REQUIRES: Plug wrench  for installing in cylinder head           Glow Fuel with 10%-20% nitro content  

D-MAX™ Charging Harness for Radio Batteries with Futaba Connector This is a charge lead for charging TX & RX radio batteries with a Futaba connector. Specs: Length: 50cm Wires: 20AWG Charger Connectors: 4mm male bullets Battery Connector: Futaba RX

SKYRC eN20 NiMH/NiCd Charger is an economic, high quality 100-240V AC charger, designed for charging NiMH and NiCad batteries from 4-8 cells. The circuit power is 20W and max charge current can reach to 3A. There are three kinds of charge current 1A/2A/3A that can be selected. You could select the proper charge current according to battery capacity. There is one LED indicating the charger status (ready to charge/charging/charge finish). The operation of the charger is also very simple. There is a toggle switch in the charger which can be used to select charge current. After you power on the charger, select the charge current, connect the battery and charger, the charger will start working.   Explanation of LED Status: CHARGE LED STATUS CHARGE STATUS LED Flashes Green The Charger is Ready LED Glows Red Battery Charger in process LED Glows Green Battery charger is fully charged Specifications: AC Input Voltage: 100-240V, 50-60HZ Output Power: 20W Charging Current (Selected by Switch): 1A, 2A, 3A Battery Type (Selected by Switch): NiMH/NiCd Battery Cell Count: 4-8 cells 1 LED for Charging Status Dimension: 69.4 x 110.7 x 40.5 mm Weight: 175 g Included: eN20 Charger 240VAC adapter with Euro connector Charging lead with Tamiya connector Specifications: AC Input Voltage: 100-240V, 50-60HZ Output Power: 20W Charging Current (Selected by Switch): 1A, 2A, 3A Battery Type (Selected by Switch): NiMH/NiCd Battery Cell Count: 4-8 cells 1 LED for Charging Status Dimension: 69.5 x 110 x 40.4 mm Weight: 175 g