Hopp til innhold
-4%

Gens ace Battery LiPo 4S 14.8V-6800-120C(EC5) 155x47x48mm

Art.nr: B-120C-6800-4S1P-Bashing-EC5

1.349,-

1.399,-

- 4%
Gens Ace

Gens Ace

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Gens ace Battery LiPo 4S 14.8V-6800-120C(EC5) 155x47x48mm

Features:

Large-capacity battery specially designed for ARRMA vehicles to maximize battery life. 
Better grip in the battery tray . 
PC material and silicon rubber case provides dual protection

Usage:

Gens ace 6800mAh 14.8V 120C 4S1P Lipo Battery Pack with EC5-Bashing Series is suited for 1/5 Scale, 1/8 Scale Sledge.

Specs

Product Type: Soft Case Lipo Battery Pack-Bashing Series
- Capacity: 6800mAh
- Voltage: 14.8V
- Net Weight: 673g
- Balance Plug: JST-XHR
- Discharge Plug: EC5

 

Produsent

Kunder kjøpte også

M-DRIVE Wheel Nut Wrench Tool - 17mm High quality 17mm wheel nut wrench tool made of red/black anodized aluminium. The perfect tool for removing and tightening your 1/8 Buggy, 1/8 Truggy or 1/8 GT wheel nuts. It also fits Traxxas E-Revo, Summit, T-Maxx 3.3, Revo 3.3 & other brands of bigger monster trucks with 17mm wheel nuts. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Size: 9x29x110mm Nut Wrench Socket: 17mm hex Nut Wrench Socket Size: D23 x L53mm  Suitable for: 17mm Wheel Nuts

149,-

KJØP
 This is a 12" Servo Extension by Hitec. FEATURES: This allows you to extend the distance between your receiver and servo. INCLUDES: (1) Extension Futaba Style REQUIRES: Plugging into receiver and servo SPECS: Length: 12" (304mm) COMMENTS: Wire color code: Hitec- Black: negative Red: positive Yellow: signal

49,-

KJØP
Traxxas 10257-BLUE - Aluminium Wheel Washers Wheel washers, machined aluminum, blue (4) Upgrade your Maxx® Slash® wheels with this set of four brightly anodized aluminum wheel washers. Accessory for: Maxx® Slash®

239,-

259,-

KJØP
-8%
Traxxas 10221-BLUE - Aluminium Chassis Brace Chassis brace, front, 6061-T6 aluminum (blue-anodized/ 2.5x6mm CCS (with threadlock) (2) Take your Maxx® Slash® to the next level by replacing the stock front chassis brace with this heavy duty aluminum upgrade. Made from tough 6061-T6 aluminum and brilliantly anodized in high-impact color, the HD front chassis brace provides additional structural reinforcement for high loads and hard landings. Whether you’re sending it at the skate park, or launching from a ramp, the heavy-duty chassis brace is built for extreme punishment. Accessory Part for: Maxx® Slash®

469,-

499,-

KJØP
-6%
Traxxas 7775X Wheels, wheelie bar, 6061-T6 aluminum (blue-anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings (4) Machined from tough 6061-T6 aluminum and hard-anodized in brilliant eye-catching colors, these wheelie bar wheels are the perfect finishing touch for your ride. Durable soft-compound tires reduce side-to-side movement for stable, consistent wheelies. Four 10x15x4 mm bearings are used to reduce friction and increase precision. Includes axles (2) and screws (2). (Fits 7776, 8976, and 9576 wheelie bars). Accessory part for these models: Maxx® Sledge® X-Maxx® XRT™

439,-

499,-

KJØP
-12%
Gens Ace Imars D300 Dual G-Tech 300/700W Black   Dual XT60 tilkobling AC300W / DC 2x350W Kompakt design Gens Ace Imars D300 Dual Charger er en kraftig lader med to utganger. Laderen kan lade flere ulike typer batterier inkludert LiPo og kan brukes både på 220V hjemme og på 12V eller lignende strømkilde. Ladeutgangene er XT60 og det følger med overganger till EC5, Deans og EC3-type plugger. Det følger også med strømledning, USB-kabel og balanseringsbrett for ulike typer batterier. D300 er også designet for smartlading G-Tech Eco batterier fra Gens Ace. PS! Produkt kan avvike fra video. Klippet er lagt til som relevant opplysning til produktet, men er ikke nødvendigvis identisk. Innhold i en produktvideo, testvideo eller et review kan avvike fra produktet som selges. Dette kan gjelde farger, spesifikasjoner, versjonsforskjeller, regionsforskjeller m.m. Det er produktets navn, beskrivelse og bilder du skal forholde deg til ved kjøp av varen.   Imars D300 er en god multilader som kan blant annet kan lade LiPo, LiHV, LiFe og NiMh-batterier. På 220V har laderen max effekt på 300W totalt på de to utgangene. Dette gjør at man kan lade ett stk 6S LiPo på ca 14A. Men lader man 2 batterier samtidig så fordeles ladeeffekten og man kan da lade 2stk 2cell LiPo på 16A, 2stk 3cell LiPo på 14A, 2stk 4cell LiPo på 10A, 2stk 5cell LiPo på 8A mens to stk 6cell LiPo vil kunne lades på ca 7A. Man kan også blande batterityper og lade ett LiPo på den ene utgangnen og ett NiMh-batteri på den andre, her er det mange muligheter. Med DC-kilde på 20-30V har man tilgjengelig hele 350W pr kanal. Laderen vil også kunne brukes med lavere DC-spenning som 12V men med begrensning på 34A inn vil ikke lader kuynne yte maks.   Spesifikasjoner: Vekt 530gram Innspenning AC 100-240V Innspenning DC 7-30V Display LCD 2.4 tommer Størrelse 145x76x62mm Antall celler LiPo/LiFe/LiHv 1-6S Antall celler NiMh 1-16 Ladestyrke 0.1-16A x 2 Maks Ladeeffekt AC 300W fordelt Maks Ladeeffekt DC 2 x 350W Utladeeffekt 0.1-3A x 2 Skal man lade batterier med andre typer strømkontakt, må tilbehør kjøpes. Se under for tilbehør. Viktig info! Husk at ved lading av lipo batterier skal man for å oppnå full balansering av pakken kople til begge kontaktene fra batteriet og velge LiPo Balance programmet, ikke LiPo Charge. Product details in english The Imars D300 Charger is a versatile and intelligent charger that supports both charging and discharging. As a member of G-Tech Eco, Imars D300 Charger is designed specifically for the G-Tech smart battery, but is also compatible with non-smart batteries. When a G-Tech smart battery is connected to the Imars D300 charger, the charger will automatically identify the battery type, voltage through the smart balance connector, and charging current recommended by the battery manufacturer. For non-smart batteries, it is necessary to manually select the battery type and the required working mode to get started. The Imars D300 Charger offers a range of features, including dual channel AC/DC smart balance charging, a small and lightweight portable design, a wide-view IPS display, and high power charging. The charger has seven operating modes: charge, discharge, balance, storage, ExtDischarge, SyncCharging, and digital power supply. It offers simple to use and operation.

1.795,-

1.995,-

KJØP
-10%
The UP200AC DUO Charger is the twins charger with 200watt power outputs and built-in power supply, total output is 400 Watts. Each channel is capable of charging all types batteries at up to 12.0 A and discharge at 0.1-5.0A, it include 4sets fan cooling system and an internal sensor for controlling fan speed, internal cell balancers, high contrast LCD displays and important warning and safety function   Input voltage: AC 100-240V                          DC 11.0-18.0V  Charge power: 2x200W (400W)  Discharge power: 2x25W (50W)  Charge current range: 0.1-12.0A  Discharge current range : 0.1-5.0A  LiIo/LiPo/LiFe cell count: 1-6 series  NiCd/NiMH battery cell count: 1 - 15cells  Pb battery voltage : 2V-20V  (1-10cells)  Current drain for balancing LiPo: 300mah/cell  Battery data memory: up to 10 data  Dimension:244*199*76mm   *Charges 1-6 cell LiPo, LiFe and Li-ION, 1-15 cell NiCd and NiMH and 2-20V lead acid batteries *Fast Charge, Balance Charge and Storage Charge modes for lithium batteries *Automatically controls current rate during charging and discharging process *Two independent 200 watt power outputs charges two batteries simultaneously *Two independent balancing ports for lithium batteries *Five user customizable pre-set per output *Four fan cooling system with internal sensor for controlling fan speed *Batteries can be set to automatically Charge/Discharge or Discharge/Charge up to a maximum of 10 cycles *Automatic charge termination if battery temperature gets too high *Temperature probe is required and must be purchased separately *PC-based program can analyze the characteristics of each battery via a USB port, graph of voltage, current and capacity curves with individual voltage of each cell in a lithium pack can be displayed on a PC- *PC-LINK USB adaptor is required and must be purchased separately   Battery Type Number of Cells Voltage Level Max. Charge Voltage Max. Fast Charge Rate Min. Discharge Voltage NiCd 1 - 15 1.2V / Cell 1.5V / Cell 1 - 2C* 0.85V / Cell NiMh 1 - 15 1.2V / Cell 1.5V / Cell 1 - 2C* 1.0V / Cell Li-Ion 1 – 6 3.6 / Cell 4.1V / Cell 1C 2.5V / Cell LiPo 1 – 6 3.7V / Cell 4.2V / Cell 1C 3.0V / Cell LiFe 1 – 6 3.3V / Cell 3.6V / Cell 4C 2.0V / Cell Pb (Lead Acid) 1 - 10 2.0V / Cell 2.46V / Cell 0.4C 1.75V / Cell  

3.790,-

KJØP
Yeah Racing Aluminum 2.5mm Allen Hex Driver Tool Black Gold Description: With an anti-slip design handle and tips with an improved material for the tips these sleek black tools with a gold trim will sure be the best tools for you to keep in your pitbox! Feature: For: Car Building Material: Aluminum Color: Black/Gold Include: Allen Driver (1 pc)

99,-

109,-

KJØP
-9%
Shock caps, aluminum (blue-anodized), GT-Maxx® shocks (4)

575,-

KJØP
M-DRIVE PRO TiN Hex/Allen Wrench Tool - 2.5mm Ball Hex High quality PRO series hex/allen wrench tool with black/gold anodized aluminium handle and TiN coated hardened steel steel ball head tip.   Specs: Handle: Black & Gold anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Hex Size: 2.5mm (ball) Tip/Bits Diameter: 3mm Tip/Bits Material: Hardened steel (TiN coated) Suitable for: M3 hex screws with allen head (cylindrical) M4 hex screws with countersunk head M4 hex screws with button head Note that a ball head hex/allen tool tip always wear faster that a straight hex. They are also more easy to brake when dropping them on the floor or using too much force while tightening/losening a screw.

89,-

KJØP
Body Maxx Long Wheelbase Rock´n´Roll Body, Maxx®, Rock n' Roll (painted, decals applied) (fits Maxx® with extended chassis (352mm wheelbase)) Is it time to upgrade your Maxx® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. ProGraphix bodies come fully-assembled and ready to mount with pre-installed body mounts, roof skid plate, and tailgate protector. Fits V2 Maxx® body (352 mm wheelbase).

869,-

899,-

KJØP
-3%
Suspension arms, upper, blue (left or right, front or rear) (2) (for use with #8995 WideMaxx™ suspension kit)

119,-

KJØP
Replacement steel drive cup with 4x15.8 mm screw pin. Fits 8950X or 8996X steel CV driveshafts.

89,-

KJØP
Skidplate, front (1), rear (1)

99,-

KJØP
Carriers, stub axle (blue-anodized 6061-T6 aluminum) (rear) (2)

629,-

KJØP
Wheelie bar, blue

299,-

KJØP
Side Marker Light Housing Mercedes G500 / G 63

69,-

KJØP
Servo horn, steering, metal/ 3x14 BCS (1) Spline: 25T

79,-

KJØP
XRT Race Truck 8s TQi TSM RTR Green • Race-Inspired Engineering • Extreme 8s Power and Speed • X-Truck™ Size and Strength   The Traxxas XRT™ fuses race-inspired design and engineering with X-Maxx® power and strength. The result is an all-new platform with sharp reflexes and unprecedented stability that is capable of exploiting the upper range of extreme 8s power and speed. Built For Speed And Handling XRT was engineered with a focus on speed, handling, and performance. XRT’s low center of gravity, ultra-wide stance and low-profile body deliver confidence and control as XRT accelerates across the wide-open spaces to an all-out speed of 96+KPH. Proven Tough All-Metal Driveline XRT performance and durability begins with its all-metal 8s driveline. Steel 4-gear differentials and steel driveshafts are joined by a high-strength extruded aluminum center shaft. It’s a precision-engineered recipe that has been proven monster-truck tough in the X-Maxx. Race-Inspired Low-CG Chassis XRT’s performance-focused chassis design is configured to lower the center of gravity for superior handling and stability. The dual 6700 4s batteries and the steering servo are positioned to place the weight as low as possible in the chassis and provide protection for these critical components. Patent-Pending Clipless Body XRT’s patent-pending clipless body easily removes and installs in just seconds and yet it locks in place with incredible strength and security. The system uses a cage inside the body to minimize flex while external skids are strategically placed to protect the body. Gravix™ Race Tires XRT’s Gravix™ race tires are a revolutionary new hybrid design with densely packed biting edges and sipes. They deliver outstanding grip on hard-packed surfaces along with fast and quiet-running precision. VXL-8s Power System Already Traxxas’ most powerful speed control, XRT’s VXL-8s™ goes even further with an aggressive tune that maximizes power output across the entire RPM range. More power under the curve delivers mid-range punch that hits hard for rolling wheelies on demand. Bury the throttle at any speed and XRT responds instantly with effortless acceleration.   Traxxas XRT Specs: Length (including wing): 798mm Front & Rear Track: 595mm Ground Clearance: 49mm Weight: 8.94kg without body / 9.54kg with body / 10.83kg with body & two 4s 6700mAh LiPos Height: 258mm (ride height) / 308mm (full droop) Wheelbase: 480mm Shock Length (front): 173mm Shock Length (rear): 173mm Tires (Pre-Glued): 188x97mm Wheels: 110x147mm Speed Control: Velineon® VXL-8s Motor (electric): Velineon® 1200XL Brushless with heat sink and dual fan shrouds Overall Drive Ratio: 20.6:1 (20/50 motor pinion and spur gear) Differential Type: Sealed, hardened steel bevel, limited slip Gear Pitch (Spur and Pinion): Module 1.0 Chassis Structure/Material: Composite Nylon Tub Brake Type: Electronic Drive System: Shaft-driven 4WD Steering: Bellcrank Radio System: TQi™ 2.4GHz Transmitter with TSM® receiver™ Servo Torque: 26kg/cm (6V) Servo Speed: 0.17s/60° (6V) Top Speed: 96+ KPH* with two 4s LiPo batteries and included optional gearing Skill Level: 5 Battery Tray: 186x51x44mm Required Batteries: 4 “AA” (transmitter) and 4-cell LiPo battery (x2) *96+ kph with Two 4s LiPo Batteries and Included Optional Speed Gears Velineon 1200XL Motor Specs: Type: 1275Kv Sensorless Brushless Weight: 665g Length: 110mm Diameter: 48mm Connector Type: Traxxas 6.5mm Bullet Connectors Velineon VXL-8s ESC Specs: Input Voltage: 8s LiPo (Max 33.6 Volts) BEC Voltage: 6V BEC Current Continuous: 10 A BEC Current Peak: 20 A Motor Connectors: Traxxas 6.5mm Bullet Connectors Battery Connectors: Traxxas High-Current Connectors Power Wire: 10-gauge Maxx Cable Ports: RX Input, Auxiliary Fan, Traxxas Accessory Port   What’s In The Box: XRT, Ready-To-Race® model with Traxxas Big Block™ brushless motor VXL-8s waterproof electronic speed control with integrated telemetry Quick Start Guide TQi™ 2.4GHz radio system High quality maintenance tools Optional speed gears   What You’ll Need: LiPo Batteries: Traxxas recommends dual 4-Cell, 6700 mAh Power Cell LiPo batteries (part #2890X) or the Dual 4s Completer Pack (Part #2997). LiPo Balance Charger with iD™: Traxxas EZ-Peak® Live 4s-capable charger is recommended for easy and fast charging performance (model #2971). AA Alkaline Batteries: Four AA alkaline batteries for the transmitter.

13.995,-

15.495,-

KJØP
-10%
Low Resistance Gold Plating 2U-3U Heat Resistant Housing (-20–200°C) Max load: 100-150A Size (together) : L: 33.5 x W20 x H10 mm Weight: 12.7 g (pair) Bullet Connector Diameter: 5 mm Stripped Wire Max dia: 4.3 mm (10AWG) Package includes: 1 pair of EC5 connectors

55,-

KJØP
XRT Race Truck 8s TQi TSM RTR Red • Race-Inspired Engineering • Extreme 8s Power and Speed • X-Truck™ Size and Strength   The Traxxas XRT™ fuses race-inspired design and engineering with X-Maxx® power and strength. The result is an all-new platform with sharp reflexes and unprecedented stability that is capable of exploiting the upper range of extreme 8s power and speed. Built For Speed And Handling XRT was engineered with a focus on speed, handling, and performance. XRT’s low center of gravity, ultra-wide stance and low-profile body deliver confidence and control as XRT accelerates across the wide-open spaces to an all-out speed of 96+KPH. Proven Tough All-Metal Driveline XRT performance and durability begins with its all-metal 8s driveline. Steel 4-gear differentials and steel driveshafts are joined by a high-strength extruded aluminum center shaft. It’s a precision-engineered recipe that has been proven monster-truck tough in the X-Maxx. Race-Inspired Low-CG Chassis XRT’s performance-focused chassis design is configured to lower the center of gravity for superior handling and stability. The dual 6700 4s batteries and the steering servo are positioned to place the weight as low as possible in the chassis and provide protection for these critical components. Patent-Pending Clipless Body XRT’s patent-pending clipless body easily removes and installs in just seconds and yet it locks in place with incredible strength and security. The system uses a cage inside the body to minimize flex while external skids are strategically placed to protect the body. Gravix™ Race Tires XRT’s Gravix™ race tires are a revolutionary new hybrid design with densely packed biting edges and sipes. They deliver outstanding grip on hard-packed surfaces along with fast and quiet-running precision. VXL-8s Power System Already Traxxas’ most powerful speed control, XRT’s VXL-8s™ goes even further with an aggressive tune that maximizes power output across the entire RPM range. More power under the curve delivers mid-range punch that hits hard for rolling wheelies on demand. Bury the throttle at any speed and XRT responds instantly with effortless acceleration.   Traxxas XRT Specs: Length (including wing): 798mm Front & Rear Track: 595mm Ground Clearance: 49mm Weight: 8.94kg without body / 9.54kg with body / 10.83kg with body & two 4s 6700mAh LiPos Height: 258mm (ride height) / 308mm (full droop) Wheelbase: 480mm Shock Length (front): 173mm Shock Length (rear): 173mm Tires (Pre-Glued): 188x97mm Wheels: 110x147mm Speed Control: Velineon® VXL-8s Motor (electric): Velineon® 1200XL Brushless with heat sink and dual fan shrouds Overall Drive Ratio: 20.6:1 (20/50 motor pinion and spur gear) Differential Type: Sealed, hardened steel bevel, limited slip Gear Pitch (Spur and Pinion): Module 1.0 Chassis Structure/Material: Composite Nylon Tub Brake Type: Electronic Drive System: Shaft-driven 4WD Steering: Bellcrank Radio System: TQi™ 2.4GHz Transmitter with TSM® receiver™ Servo Torque: 26kg/cm (6V) Servo Speed: 0.17s/60° (6V) Top Speed: 96+ KPH* with two 4s LiPo batteries and included optional gearing Skill Level: 5 Battery Tray: 186x51x44mm Required Batteries: 4 “AA” (transmitter) and 4-cell LiPo battery (x2) *96+ kph with Two 4s LiPo Batteries and Included Optional Speed Gears Velineon 1200XL Motor Specs: Type: 1275Kv Sensorless Brushless Weight: 665g Length: 110mm Diameter: 48mm Connector Type: Traxxas 6.5mm Bullet Connectors Velineon VXL-8s ESC Specs: Input Voltage: 8s LiPo (Max 33.6 Volts) BEC Voltage: 6V BEC Current Continuous: 10 A BEC Current Peak: 20 A Motor Connectors: Traxxas 6.5mm Bullet Connectors Battery Connectors: Traxxas High-Current Connectors Power Wire: 10-gauge Maxx Cable Ports: RX Input, Auxiliary Fan, Traxxas Accessory Port   What’s In The Box: XRT, Ready-To-Race® model with Traxxas Big Block™ brushless motor VXL-8s waterproof electronic speed control with integrated telemetry Quick Start Guide TQi™ 2.4GHz radio system High quality maintenance tools Optional speed gears   What You’ll Need: LiPo Batteries: Traxxas recommends dual 4-Cell, 6700 mAh Power Cell LiPo batteries (part #2890X) or the Dual 4s Completer Pack (Part #2997). LiPo Balance Charger with iD™: Traxxas EZ-Peak® Live 4s-capable charger is recommended for easy and fast charging performance (model #2971). AA Alkaline Batteries: Four AA alkaline batteries for the transmitter.

13.995,-

15.495,-

KJØP
-10%
Spring retainer (adjuster), red-anodized aluminum, GTX shocks (4) (assembled with o-ring)   Red-anodized aluminum upper spring retainers equipped with integrated o-ring for precise spring pre-load adjustment (4 each).

289,-

KJØP
Shock caps, aluminum (red-anodized), GTX shocks (4)/ spacers (8)   Red-anodized aluminum shock caps add strength and style to X-Maxx GTX shocks.

639,-

699,-

KJØP
-9%
SkyRC Ultimate Duo 260W AC/DC - Balance Charger / Discharger / Power Supply SkyRC D260 is a dual-channel AC/DC charger, which features an intuitive interface, and its button design makes it incredibly easy to operate. With two independent circuits and the ability to charge batteries up to 6S at a maximum of 14A per channel, D260 is a smart choice for RC hobbyists. Multi-purpose for Most Battery Chemistries The juice box comes with the charging algorithm for the most common battery chemistries: LiPo, Li-Ion, LiHV, LiFe, NiMH, NiCD, and Pb (lead-acid). Dual Output D260 allows you to charge two different battery packs simultaneously with 130W rated power per channel. The maximum charge current can be 14 amperes. Intuitive Operation The five-button panel and the brightly backlit LCD screen making the charging a breeze even for beginners. D260 inherits from other chargers by SkyRC; many users will find it very familiar and easy to get started. Even if D260 is your first programmable charger, you’ll find it easy to learn. Users just scroll through parameters, use up/down keys to adjust values, then click a key to enter. LiHV Mode Available The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage of 4.35V.   Versatile with the Addition of AGM & Cold Modes AGM (Absorbent Glass Mat) battery is maintenance-free, provides excellent electrical reliability, and is lighter than the flooded lead-acid type. However, AGM batteries are far more different than normal lead-acid batteries. Although both of them have the same essential components, they have different chemical structures that make them a lot different from each other. Never take the risk of charging AGM batteries with a regular charger in the normal Pb mode. Smart & Efficient Cooling System Temperature controlled high-speed sleeve bearing cooling fan effectively blows the air through the extruded aluminum heat sink, effectively cooling the device. DC Power Supply With just a few clicks, D260 can be turned into a power supply unit to power your hobby equipment. Two channels can be used individually to power two different hobby gadgets simultaneously. Universal Voltage Input With the universal-voltage input circuit, you don't need hassle finding a voltage converter between 110V and 220V while traveling around! Even in the field, with the built-in DC input between 11V-18V, racers power the charger with their DIY battery packs. PC Software for Data Analysis and Firmware Upgrade ChargeMaster can start/stop the charging process, and view real-time graphs of current, voltage, capacity, and monitor single-cell voltage. Included: D260 Charger 2x XT60 charging leads 1x AC lead English printed manual D260 Specifications: DC Input Voltage: 11-18V AC Input Voltage: 100-240V Display Type: 128x64 LCD Display Backlight: Cool White Case Material: Metal & Plastic Controls: Five Buttons Case Size: 160x150x71mm Weight: 896g DC Power Supply Output: 130W Per Channel PC Communications: USB Port for Firmware Upgrade External Port: 2-6S Balance Socket-XH, Micro USB Port for Firmware Upgrade, Battery Socket, AC/DC Input, DC Output & 5V-2.1A USB Output Delta Peak Detection for NiMH/NiCd: 3-15mV/cell / Default: 4mV/cell Balance Current: 500mA/cell Reading Voltage Range: 0.1-26.1V Charge Current: (0.1A-14.0A) x2 Safety Timer: 1-720minutes / OFF Charge Wattage: 130Wx2 Discharge Current: (0.1A-2.0A) x2 Discharge Wattage: 10Wx2 Balance Cells: 2-6 cells Memory: 10x2 Different Charge/Discharge Profiles Charge Method: CC/CV for Lithium Types and Lead (Pb) Batteries / Delta-peak Sensitivity for NiMH/NiCd Charge Voltage: NiMH/NiCd: Delta peak detection LiPo: 4.18-4.25V/cell LiIon: 4.08-4.2V/cell LiFe: 3.58-3.7V/cell LiHV: 4.25-4.35V/cell Battery Types/Cells: LiPo/LiIon/LiFe/LiHV: 1-6 cells NiMH/NiCd: 1-15 cells Pb: 2-20V Battery Capacity Range: NiMH/NiCd: 100-50000mAh LiPo/LiIon/LiFe/LiHV: 100-50000mAh Pb: 100-50000mAh Discharge Cut-off Voltage: NiMH/NiCd: 0.1-1.1V/cell LiPo: 3.0-3.3V/cell LiIon: 2.9-3.2V/cell LiFe: 2.6-2.9V/cell LiHV: 3.1-3.4V/cell Pb: 1.8-2.0V/cell Specifications: Weight: 896 g Input Voltage: 11-18VDC / 100-240VAC V Dimensions: 160x150x71 mm Charge Current: 2 x 0,1-14A Charges (Li-Fe): 1-6 Cells Charges (Li-Ion): 1-6 Cells Charges (Li-Po): 1-6 Cells Charges (NiMH): 1-15 Cells Charges (Pb): 2-20V Charging (Battery type): Li-Fe, Li-Ion, Li-Po, LiHV, Multi Charger, NiMH, Pb Discharge Current: 2 x 0,1-2,0A Output: 2 x 130W

1.799,-

1.899,-

KJØP
-5%
CHARGE LEAD, 4MM BULLET TO XT90 MALE, 12AWG, 150MM (ESC END) MERKE Radient KONTAKT 4mm BULLET, XT90 PRODUKT Ladekabel

109,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png