Hopp til innhold

Castle Creations 011003200 Wire 36" 10 AWG White

Art.nr: 011-0032-00

149,-

Castle Creations

Castle Creations

På lager: 6

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Castle Creations 36" section of 10 AWG Wire with White Insulation.

FEATURES

Ideal for speed controls, motors and batteries

INCLUDES

36" section of 10 AWG Wire with White Insulation

SPECIFICATIONS

Length: 36" (91.4cm)

Wire Gauge: 10 AWG

Produsent

Castle Creations makes the best electronic speed controllers in the industry, possibly the world!  Our engineers have spent countless hours integrating features and firmware that no other manufacturers can match.

Speed Controllers enabled with SmartSense use the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with electronic timing. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at each. Electronic timing in SMARTSENSE™ will advance timing automatically for peak performance during all driving conditions. This combines the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless running. Your motor will produce more power and less heat.

Kunder kjøpte også

This is the Castle Creations 4mm Polarized Bullet Connector Set. FEATURES: Compatible with 8-13 gauge wiring           Handles up to 75A current           Ideal for use as ESC connectors   INCLUDES: Two 4mm Female Bullet Connectors           Two 4mm Male Bullet Connectors           Two Plastic Housings   REQUIRES: Soldering iron with at least 40W output

119,-

KJØP
Castle Creations 010-0145-03 Monster X 25.2V ESC/1515-2200kV Motor. Putting the X in Extreme! Mamba Monster X is our latest 1:8 scale and Monster truck controller capable of 2S - 6S LiPo, with an 8 amp peak BEC - and, it’s waterproof*, so you can run your vehicle through morning dew, across soggy snow, or a muddy trail. This is the perfect upgrade for 1:8 scale buggies, truggies and on-road vehicles as well as 1:10 scale monster trucks weighing up to 15 lbs. It also comes standard with a highly efficient, 30mm ESC cooling fan. Mamba Monster X also features updated Audible Alerts that will notify you of possible issues with calibrations and error conditions to help diagnose problems in the field. Now With a Sensored Motor! The Mamba Monster X is now paired with our brand new sensored 15xx series motors.We have taken our award winning 15xx series motors and added sensor capabilities. So now you can all of the torque and performance you know and love and have even more control! We still use the same high quality components as our sensorless motors, such as ultra-thin stator laminations, high temperature sintered neodymium magnet and high RPM ABEC3 bearings. Combo includes required Castle sensor harness and sensor wire for sensored operation. Why sensored? Some drivers and applications are better suited for sensored motors. Some drivers need smoother throttle control in racing environments. When coming out of a corner a sensorless motor may not provide optimal throttle control and can cause the motor power to surge a bit. With sensored motors the throttle will feel smoother and more linear which allows for more precise throttle management. If you are simply bashing and not racing on a track you will most likely not see the full benefits from a sensored operation. The Auxiliary Advantage. Mamba Monster X features the addition of a new, programmable Auxiliary Wire that allows you to make “on-the-go” adjustments to several settings such as torque control, and max throttle, and fine-tune the performance of your ESC right from the transmitter using an auxiliary channel on the receiver. The AUX wire function is disabled by default but is programmable via Castle Link. Once you have programmed the functionality of the AUX wire, that setting can then be adjusted on-the-go from a compatible transmitter. Data Logging Mamba Monster X can capture and record performance data from your last couple of runs, commonly referred to as data logging. This data can be downloaded via the Castle Link USB programmer; you can use the Quick Connect Duo (sold separately) to allow you to quickly access the ESC's receiver wire without having to disconnect from your receiver. You can then analyze this data and make adjustments to the ESC to maximize both performance and battery life. Telemetry Capability Mamba Monster X is telemetry ready, which means owners of the Futaba T4PX Transmitters are able to purchase the Castle Telemetry Link for S.BUS2. Real-time data such as ESC temperature, voltages and RPM can be monitored to ensure performance advantages and spare you the “unknown” parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection and can increase performance. The 1515-2200kv version is capable of 2S to 6S LiPo and is perfect forMonster trucks up to 6S. This is the perfect motor for 1:8 scalebuggies, truggies and on-road vehicles as well as 1:10 scale monstertrucks weighing up to 15 lbs. Paired with our Mamba Monster X ESC youwill have all the power your 1/8th scale vehicle demands with thesmoother throttle control of a sensored motor. *Although Mamba Monster X and Castle brushless motors are waterproof, they are not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.  **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. SPECIFICATIONS : 2023-04-28 Application: Car Motor Type: Brushless kV Value: 2200 kV Motor diameter: 40 mm Motor length: 75,4 mm Shaft length: 20 mm Shaft Diameter: 5,0 mm Connector: 6,5mm Bullet Special: Complete System , Sensor-based

4.595,-

4.795,-

KJØP
-4%
  Onyx Adapter Male T-Plug to Female XT90

89,-

KJØP
INFORMATION Patent Pending Design Low Resistance Gold Plating 2U-3U Heat Resistant Housing (-20–200°C) Anti-Spark Function Solder Joint Protection Covers Compatible with std XT-90 connectors Max load: 90-120A Size (together) : L: 29 (49) x W21 x H10 mm Weight: 15 g (pair) Connector Diameter: 4.5 mm Wire Max dia: 4.0 mm (10AWG) Wire insulation max diameter: 6.5 mm Package includes: 1 pair of XT-90S connectors & solder covers

99,-

KJØP
These are the 4mm High Current Bullet Connectors from Castle Creations. FEATURES: Gold plated           Fits wire diameter up to 4mm           Use 16 gauge to 13 gauge wires           Up to 75A current INCLUDES: Three sets of bullet connectors REQUIRES: Solder and soldering iron. SPECS:    Length: .66" (17mm)           Diameter: .15" (4mm) inside (where the wire is soldered to)           Diameter: .19" (5mm) outside

149,-

KJØP
BEC(Battery Eliminator Circuits) er små enheter som fjerner behovet for eget batteri til mottaker og servoer. Enheten mottar høy spenning fra drivbatteriet og justerer ned til passende volt for radiosystemet ditt. Dette er gjerne nødvendig i systemer som drar mye strøm pga. amnge servoer, eller ved bruk av høyre enn 3s drivbatteri. For å justere voltstyrken trengs Castle USB Link (medfølger ikke). This is the CC BEC Pro High Output Switching Battery Eliminator Circuit (BEC)                            from Castle Creations. FEATURES: Ideal for use in larger RC cars, electric aircraft, and electric             helis 500 size and larger that have high power demands for their             radio system           Also works well in larger electric powered RC aircraft and RC             crawlers and monster trucks that use high powered servos   INCLUDES: CC BEC Pro High Output Switching BEC with connectors and instruction             sheet   REQUIRES: Installing between battery and receiver   SPECS:    Max Input: 12S LiPo (50.4V)           Max Output Current: 20 amps peak           Adjustable Output Voltage: 4.8V-12.5V           Max Continuous Current: Input Voltage  Max Continuous Output Current                                      16V                    15A                                      24V                    13A                                      32V                    11A                                      40V                     9A                                      48V                     8A           Length: 1.69" (43mm)           Width: 1.3" (33mm)           Height: 0.94" (24mm)           Weight (w/o wires): 1 oz (29 g)   PS! CC BEC Pro skal ikke brukes i serie eller parallell med annen BEC eller som backup til mottakerpakkke tilkoblet RX/Servo siden av systemet.

799,-

849,-

KJØP
-6%
MAMBA X, 25.2V WP ESC, 8A PEAK BEC, DATALOGGING Meet the next generation. Castle Creations is proud to announce our new flagship surface product, the MAMBA X EXTREME 1:10 SCALE WATERPROOF ESC. We at Castle wanted to address three main concepts while designing a new ESC for the modern day RC enthusiast; VERSATILITY, RELIABILITY, and PERFORMANCE. These  are the pillars of the Mamba X design and the driving forces behind the feature-packed controller.   Waterproof: Yes Telemetry Capable: Yes Data Logging: Yes Auxiliary Wire: Yes Minimum Input Voltage: 2S Maximum Input Voltage: 6S Sensored Capable: Yes The Mamba X is extremely versatile, capable of powering a wide variety of applications ranging from 2S to 6S and vehicles ranging from 1/10th scale to 1/8th scale*. Whether you are racing at the track with your 2wd buggy, bashing through mud puddles in your SCT or monster truck, or navigating a hardcore crawling excursion, this controller raises the bar to a whole new level. ESCs have a tough life - landing extreme jumps, experiencing accidental collisions, and splashing through the occasional puddle. As R/C enthusiast themselves, Castle engineers understand this and designed the Mamba X to endure these situations and power through them. It is housed in a rugged CNC-machined aluminum case and then potted in waterproof epoxy. This not only protects the electronics but ensures any heat generated in the controller can easily be dissipated through the case. The high performance Mamba X includes an integrated and powerful 8A adjustable BEC and can push the most extreme 1/10th scale setups and 1/8th scale* race buggies. SmartSense allows you to take advantage of smooth, cog-free, and predictable sensored starts, and Castle’s new and improved throttle response keeps you ahead of the competition. The Mamba X is proudly designed and manufactured in Olathe, Kansas and is backed by Castle Creations’ 1-year warranty and unparalleled "make-it-right" customer support. Call us, email us, or walk in our front door – we’re here to help. Features: Wide 2S to 6S input voltage range Sensored Motor Support Waterproof 8A Adjustable BEC (5.25V-8.0V) Data-logging Rugged CNC Aluminum Case Castle Link Programming Support SmartSense™ Integrated Capacitors Removable 30 mm Cooling Fan Integrated 4 mm Bullet Connectors 12 AWG Power Wires Waterproof Switch Audible Alerts SMARTSENSE™ Enabled by default, the Mamba X uses the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with electronic timing. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at each. Electronic timing in SMARTSENSE™ will advance timing automatically for peak performance during all driving conditions. This combines the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless running. Your motor will produce more power and less heat. AUXILIARY WIRE FUNCTIONALITY The Mamba X allows “on-the-fly” adjustments to be made through the AUX wire once enabled in Castle Link. Once you have selected an AUX wire function, that setting can then be tuned from your transmitter while driving. Torque control, max throttle, max brake and drag brake adjustments are a sampling of the available modes. This real-time tuning allows you to quickly and easily fine-tune your system. DATALOGGING Enabled by default, the Mamba X captures and records performance data from your vehicle. This allows you to view a detailed turn-by-turn record of what your ESC actually experienced during the run. You will be able to record real-time data such as motor RPM, battery current and voltage, ESC and motor temperature, throttle input, and more. Download and analyze the collected data via Castle Link and make adjustments to maximize both performance and battery life. CASTLE LINK™ For nearly 20 years Castle engineers have been setting the bar for industry leading software functionality. The Castle Link Programming Suite is your ticket to creating the perfect setup. To gain access to the host of tuning parameters, simply redeem the coupon for the Castle Link adapter included with your Mamba X purchase. Download the simple to install software from our website and you are ready to personalize your controller’s parameters. Don’t forget to use the “check for updates” feature in Castle Link to download new software as it becomes available. New features are yours at no cost, a perk for choosing Castle. Technical Specs: Input Voltage Range: MIN: 2S LiPo - MAX: 6S LiPo (25.2V) BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes Cooling Fan: Yes, factory equipped (30 mm), fully removable** (see Product Use Statements below) Length: 54.4 mm Width: 35.2 mm Height: 30 mm Weight (with wires): 101 g Connectors: 4.0 mm female bullets for motor connection Items Needed for Operation: Battery Connector required, Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended. Product Use Statements: *Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.   Application Guidelines: Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 9bs/4kg Recommended Motors: Castle 1406, 1410 and 1415 Sensored motors Max. Recommended Vehicle Weight: Less than 4kg with batteries & ready-to-run Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software. Telemetry Link Capable: Yes Tech Notes: Mamba X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack's suitability for a brushless application. Recommended battery capacity for 1:10th and 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups. Applying voltages higher than 25.2V will cause irreparable damage to ESC. We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our Castle 6.5 mm Polarized Connectors, Castle 4.0 mm Polarized Connectors, Traxxas® Power Connectors or T-connectors. *In 1/8th scale setups, the Mamba X is intended to be used for off-road racing in buggies weighing up to 9 lbs (including batteries and ready-to-run). In these 1/8th scale racing setups, the Mamba X should be run at 4S Lipo (16.8V) max and is recommended to be paired with the Castle 1512-1800Kv (P/N: 060-0062-00) or Castle 1512-2650Kv (P/N: 060-0061-00) motor, with appropriate gearing only.  

2.595,-

2.895,-

KJØP
-10%
This is the Castle Creations 36" section of 10 AWG Wire with Red Insulation. FEATURES Ideal for speed controls, motors and batteries INCLUDES 36" section of 10 AWG Wire with Red Insulation SPECIFICATIONS Length: 36" (91.4cm) Wire Gauge: 10 AWG

149,-

KJØP
Hyrax 2.2" G8 Rock Terrain Truck Tires for Front or Rear 2.2" Crawler or Rock Racer The future of 2.2” Rock Racing Tire Performance has arrived with Pro-Line’s all-new Hyrax Tire! Designed from the ground up for maximum grip on the toughest terrain, the Hyrax tire is ready for anything the Race might throw at you. The Hyrax features an aggressive and open tread pattern with each tread block containing multiple Sipes for incredible tread flex. The highly detailed connected tread on the sidewall of the Hyrax extends out for unmatched side-hilling performance. The Hyrax also features futuristic stepped tread blocks that create even more forward gripping edges that dig into slick rock like no other scale tire Pro-Line has produced to date! The Hyrax is made from Pro-Line’s Legendary G8 material, so you know it provides performance you can depend on. Don’t get left behind spinning your tires, take your adventure to the next level with Pro-Line’s new Hyrax tires! Features: All-new Ground up Design for Maximum Performance Highly Detailed Sidewall for Scale Looks Stepped Blocks & Multiple Sipes Create Unmatched Grip Tackle tough terrain in Scale Style Made in the Legendary G8 Material Made in the USA Included: Hyrax 2.2” G8 Rock Terrain Truck Tires (2 pcs) Open Cell Foam Inserts (2 pcs) Specs: Height: 146 mm (5.75") Width: 55 mm (2.15") Fits: Front or Rear 2.2" Crawler or Rock Racer Wheels

459,-

469,-

KJØP
-2%
  This is the Tekin ROC412EP HD 2D 3100Kv Brushless Crawler Motor.       FEATURES Designed for heavier trail or rock racing rigs 4 pole 12 slot crawler motor design CNC machined 6061 T6 billet aluminum heatsink can High RPM ABEC5 oversized ball bearings 18.5mm rotor for greater torque and braking power Neodymium sintered magnets Rebuildable 0.196" (5mm) diameter high-strength pinion shaft Dual-plug sensor wire harness for use with all sensored and sensorless systems EP Element Proof design tackles water, mud and snow* _   INCLUDES ROC412EP HD 2D 3100Kv Brushless Crawler Motor     REQUIREMENTS Electronic Speed Control such as the Tekin RX4. Pinion gear of modeler's choice     SPECIFICATIONS Input Voltage: 2-3S Weight: 7.8oz (221g) Shaft Dimensions: .196 x .60" (5 x 15.3mm) Motor Diameter: 2.5" (62.5mm) Motor Length: 2.5" (62.5mm) Bearing Dimensions: Front: 5 x 14 x 5mm, Rear: 5 x 11 x 5mm Rotor Size: 18.5mm     COMMENTS *Designed to withstand water splashes, not meant for operation when submerged in liquid. Included dielectric grease must be used on the sensor and fan port connections to protect them from shorting.

1.990,-

KJØP
This is the Castle Creations 60" section of 13 AWG Wire with White Insulation. FEATURES Ideal for speed controls, motors and batteries INCLUDES 60" section of 13 AWG Wire with White Insulation SPECIFICATIONS Length: 60" (1.52m) Wire Gauge: 13 AWG

129,-

KJØP
This is the Field Link Portable Programmer Car Card from Castle Creations. FEATURES: Programs Castle car controllers without a computer           Works as a complete USB Castle Link with your computer           Works with all Castle Link compatible car products INCLUDES: One Field Link Portable Programmer Card           One USB cable REQUIRES: Windows PC           Castle Link Software (available at www.castlecreations.com) SPECS:    Length: 55mm (2.2")           Width: 85mm (3.3")           Thickness: 5mm (0.20") COMMENTS: Will only work with Castle controller firmware released after 2007

529,-

KJØP
This is the Castle Creations 36" section of 10 AWG Wire with Black Insulation. FEATURES Ideal for speed controls, motors and batteries INCLUDES 36" section of 10 AWG Wire with Black Insulation SPECIFICATIONS Length: 36" (91.4cm) Wire Gauge: 10 AWG

149,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png